HS-Codes - 72: Eisen und stahl:

Non-alloy pig iron containing by weight 0.5% or less of phosphorus

Roheisen, legiert; spiegeleisen

Ferromangan:

Andere

Containing by weight more than 55% of silicon

Ferrosiliciummangan

Containing by weight more than 4% of carbon , , Note: The benefit of the Most-Favoured-Nation Tariff is extended to , goods of this tariff item that originate in a country to which the General Tariff applies.

Ferrosiliciumchrom

Ferromolybdän

Andere:

Ferrovanadium

Andere

Durch direktreduktion aus eisenerzen hergestellte eisenerzeugnisse

Ferrous waste and scrap; remelting scrap ingots of iron or steel.

Abfälle und schrott, aus legiertem stahl:

Andere

Andere abfälle und anderer schrott:

No.1 in bundles

Andere

No. 1 heavy melting

Andere:

Andere

Granules and powders, of pig iron, spiegeleisen, iron or steel.

Pulver:

Andere

Rohblöcke (ingots)

Semi-finished products of iron or non-alloy steel.

Mit quadratischem querschnitt oder mit rechteckigem querschnitt und einer breite von weniger als dem zweifachen der dicke:

Of non-alloy steel:

Andere

Andere:

Andere

Blooms

Slabs, sheet bars or rounds

Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated.

Andere, in rollen (coils), nur warmgewalzt, gebeizt:

Mit einer dicke von 3 mm oder mehr, jedoch weniger als 4,75 mm

Andere, in rollen (coils), nur warmgewalzt:

Mit einer dicke von 4,75 mm bis 10 mm:

Of a width exceeding 1,525 mm but not exceeding 1,830 mm

Mit einer dicke von 3 mm oder mehr, jedoch weniger als 4,75 mm:

Of a width exceeding 1,525 mm but not exceeding 1,830 mm

Mit einer dicke von weniger als 3 mm

Andere, nicht in rollen (coils), nur warmgewalzt:

Heat treated:

Pressure vessel quality, not vacuum-degassed

Other, of a thickness of more than 10 mm but not exceeding 15.875 mm:

Of a width of 1,168.4 mm or more but not exceeding 1,879.6 mm

Of a width exceeding 2,489.2 mm but not exceeding 3,098.8 mm

Other, of a thickness of more than 15.875 mm but not exceeding 25.4 mm:

Of a width of 1,168.4 mm or more but not exceeding 1,879.6 mm

Of a width exceeding 2,489.2 mm but not exceeding 3,098.8 mm

Other, of a thickness of more than 25.4 mm but not exceeding 50.8 mm:

Of a width of 1,168.4 mm or more but not exceeding 1,879.6 mm

Of a width exceeding 2,489.2 mm but not exceeding 3,098.8 mm

Other, of a thickness of more than 50.8 mm but not exceeding 76.2 mm:

Of a width of 1,168.4 mm or more but not exceeding 1,879.6 mm

Of a width exceeding 2,489.2 mm but not exceeding 3,098.8 mm

Other, of a thickness of more than 76.2 mm but not exceeding 101.6 mm:

Of a width of 1,168.4 mm or more but not exceeding 1,879.6 mm

Of a width exceeding 2,489.2 mm but not exceeding 3,098.8 mm

Other, of a thickness exceeding 101.6 mm:

Of a width of 1,168.4 mm or more but not exceeding 1,879.6 mm

Of a width exceeding 2,489.2 mm but not exceeding 3,098.8 mm

Mit einer dicke von 4,75 mm bis 10 mm:

Pressure vessel quality, vacuum-degassed

Andere

Of a width less than 1,168.4 mm

Of a width exceeding 1,879.6 mm but not exceeding 2,489.2 mm

Of a width exceeding 3,098.8 mm

Other, of a thickness of less than 3 mm

Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated.

Mit einer dicke von 3 mm oder mehr

Annealed

Mit einer dicke von 0,5 mm bis 1 mm:

Andere

Nicht in rollen (coils), nur kaltgewalzt:

Mit einer dicke von mehr als 1 mm, jedoch weniger als 3 mm

Mit einer dicke von weniger als 0,5 mm

Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated.

Mit einer dicke von 0,5 mm oder mehr

Verbleit, einschließlich terneblech oder -band

Anders verzinkt:

Andere:

Of a thickness of 0.25 mm or more but less than 0.5 mm

Of a thickness exceeding 1 mm

Mit aluminium überzogen:

Of a thickness of less than 1.44 mm

Andere:

Of a thickness of 1.44 mm or more

Not plated or coated with metal and not clad

Electrolytically

Andere

Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated.

Auf vier flächen oder in geschlossenen kalibern gewalzt, mit einer breite von mehr als 150 mm und einer dicke von 4 mm oder mehr, nicht in rollen (coils), ohne oberflächenmuster

Not in coils

Andere:

Andere

Containing by weight less than 0.25% of carbon

Andere

Verzinnt

Of a thickness less than 0.25 mm

Mit einer dicke von 0,5 mm bis 1 mm

Anders verzinkt:

Of a thickness of 0.25 mm or more but less than 0.5 mm

Of a thickness exceeding 1 mm

Not plated or coated with metal and not clad

Electrolytically

Andere

Of a thickness less than 0.25 mm

Mit einer dicke von 0,5 mm bis 1 mm

Plattiert

Mit vom walzen herrührenden einschnitten, rippen (wülsten), vertiefungen oder erhöhungen

Of a diameter of 12 mm or less

Of a diameter exceeding 17 mm

Anderer, aus automatenstahl:

Andere

Mit kreisförmigem querschnitt mit einem durchmesser von weniger als 14 mm:

Tire cord-quality steel wire rod, as defined in Statistical Note 2 to this Chapter

Of welding quality wire rods, as defined in Statistical Note 4 to this Chapter

Other, containing by weight less than 0.25% of carbon

Other, containing by weight 0.6% or more of carbon

Of circular cross section, containing by weight less than 0.25% of carbon:

Of a diameter of 19 mm or more but not exceeding 25.5 mm

Of circular cross section, containing by weight 0.25% or more but less than 0.6% of carbon:

Of a diameter of 19 mm or more but not exceeding 25.5 mm

Of circular cross section, containing by weight 0.6% or more of carbon:

Of a diameter of 19 mm or more but not exceeding 25.5 mm

Andere

Geschmiedet

Concrete reinforcing bar, of specification CSA G30.18, with a diameter of 12 mm or less:

With a minimum yield point greater than 400MPa but not exceeding 500MPa

With a minimum yield point greater than 600MPa

With a maximum yield point of 400MPa

With a minimum yield point greater than 500MPa but not exceeding 600MPa

Concrete reinforcing bar, of specification CSA G30.18, with a diameter exceeding 39 mm:

With a minimum yield point greater than 400MPa but not exceeding 500MPa

With a minimum yield point greater than 600MPa

Anderer, aus automatenstahl:

Flat bars, including flat grader blade sections:

Of a width exceeding 76 mm but less than 152 mm

Rounds:

Of a diameter exceeding 76 mm

Squares

Andere:

Containing by weight less than 0.25% of carbon:

Of a width exceeding 76 mm but less than 152 mm

Containing by weight 0.25% or more but less than 0.6% of carbon:

Of a width exceeding 76 mm but less than 152 mm

Containing by weight 0.6% or more of carbon:

Of a width exceeding 76 mm but less than 152 mm

Andere:

Squares

Rounds, of a diameter of less than 76 mm

Rounds, of a diameter exceeding 152 mm

Other, containing by weight 0.25% or more but less than 0.6% of carbon:

Rounds, of a diameter of 76 mm or more but not exceeding 152 mm

Andere

Other bars and rods of iron or non-alloy steel.

Rounds

Anderer, nur kalthergestellt oder nur kaltfertiggestellt:

Rounds:

Andere

Andere:

Corrosion resistant concrete reinforcing bars

Andere

U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm

American standard

I-profile:

Andere

L- oder t-profile, nur warmgewalzt, nur warmgezogen oder nur warmstranggepresst, mit einer höhe von weniger als 80 mm:

Equal legs

T-profile

U-profile:

American standard

Andere

American standard

Andere

Of a height of 80 mm or more but not exceeding 152.4 mm

H-profile:

Of a height not exceeding 150 mm

Of a height exceeding 355 mm but not exceeding 635 mm

Bearing pile

Of a height of 80 mm or more but not exceeding 152.4 mm

L- oder t-profile, nur warmgewalzt, nur warmgezogen oder nur warmstranggepresst, mit einer höhe von 80 mm oder mehr:

Of a height of 80 mm or more but not exceeding 152.4 mm

L sections, unequal legs:

Large leg, of a height exceeding 152.4 mm

Andere profile, nur warmgewalzt, nur warmgezogen oder nur warmstranggepresst:

Shapes or sections, with bevelled edge or edges, of a length of more than 3.65 m and either of a width of more than 25.4 cm or of a thickness of more than 3.5 cm, for use in the manufacture of cutting edges for bulldozer or angledozer blades, front-end shovel loader buckets, combination excavating and transporting scrapers, road graders or road scrapers

Andere

Aus flachgewalzten erzeugnissen hergestellt

Andere:

L-profile

U-profile

Ribbed shapes

Andere:

I or H sections

Andere:

Andere

Nicht überzogen, auch poliert:

Of a diameter of less than 1.5 mm, in coils weighing not more than 2 kg

Other, of a diameter of 1 mm or more but less than 1.5 mm

Other, of a diameter of 3 mm or more

Round, of a diameter of less than 1 mm

Round, of a diameter of 1.5 mm or more but less than 3 mm

Flat

Other round, containing by weight 0.25% or more but less than 0.6% of carbon:

Heat treated, of a diameter of 1 mm or more but less than 1.5 mm

Heat treated, of a diameter of 3 mm or more

Other, of a diameter of 1 mm or more but less than 1.5 mm

Other, of a diameter of 3 mm or more

Flat

Other round, containing by weight 0.6% or more of carbon:

Heat treated, of a diameter of 1 mm or more but less than 1.5 mm

Heat treated, of a diameter of 3 mm or more

Other, of a diameter of 1 mm or more but less than 1.5 mm

Other, of a diameter of 3 mm or more

Flat

Verzinkt

Plated or coated wth zinc-aluminum, containing by weight less than, 0.25% of carbon:

Round, of a diameter of 1 mm or more but less than 1.5 mm

Round, of a diameter of 3 mm or more

Plated or coated with zinc-aluminum, containing by weight 0.25% or more but less than 0.6% of carbon:

Round, of a diameter of 1 mm or more but less than 1.5 mm

Round, of a diameter of 3 mm or more

Plated or coated with zinc-aluminum, containing by weight 0.6% or more of carbon:

Round, of a diameter of 1 mm or more but less than 1.5 mm

Round, of a diameter of 3 mm or more

Other, containing by weight less than 0.25% of carbon:

Round, of a diameter of 1 mm or more but less than 1.5 mm

Round, of a diameter of 3 mm or more

Other, containing by weight 0.25% or more but less than 0.6% of carbon:

Round, of a diameter of 1 mm or more but less than 1.5 mm

Round, of a diameter of 3 mm or more

Other, containing by weight 0.6% or more of carbon:

Round, of a diameter of 1 mm or more but less than 1.5 mm

Round, of a diameter of 3 mm or more

Mit anderen unedlen metallen überzogen:

Other, containing by weight less than 0.25% of carbon:

Round, of a diameter of 1 mm or more but less than 1.5 mm

Round, of a diameter of 3 mm or more

Other, containing by weight 0.25% or more but less than 0.6% of carbon:

Round, of a diameter of 1 mm or more but less than 1.5 mm

Round, of a diameter of 3 mm or more

Other, containing by weight 0.6% or more of carbon:

Round, of a diameter of 1 mm or more but less than 1.5 mm

Round, of a diameter of 3 mm or more

Andere:

Andere:

Containing by weight 0.25% or more but less than 0.6% of carbon

Stainless steel in ingots or other primary forms; semi-finished products of stainless steel.

Andere:

Andere:

Andere

Nur warmgewalzt, in rollen (coils):

Mit einer dicke von 4,75 mm bis 10 mm

Mit einer dicke von weniger als 3 mm

Mit einer dicke von mehr als 10 mm:

Of a width exceeding 1,830 mm

Of a width of 600 mm or more but not exceeding 1,830 mm

Mit einer dicke von 3 mm oder mehr, jedoch weniger als 4,75 mm

Nur kaltgewalzt:

Mit einer dicke von 3 mm oder mehr, jedoch weniger als 4,75 mm:

Andere

300 Series

Mit einer dicke von 0,5 mm bis 1 mm:

Andere

300 Series

Andere

Nur warmgewalzt:

Mit einer dicke von weniger als 4,75 mm

300 Series

Andere

Mit vom walzen herrührenden einschnitten, rippen (wülsten), vertiefungen oder erhöhungen

Other rounds

Andere

Stabstahl, nur warmgewalzt, nur warmgezogen oder nur warmstranggepresst:

Mit vom walzen herrührenden einschnitten, rippen (wülsten), vertiefungen oder erhöhungen

Of a diameter of 25 mm or more

Andere:

Of a diameter of less than 25 mm

High nickel alloy steel:

Andere

Flat bars

Stabstahl, nur kalthergestellt oder nur kaltfertiggestellt:

Other, of high nickel alloy steel:

Rounds, of a diameter of less than 25 mm

Andere:

Rounds, of a diameter of less than 25 mm

Andere

Mit vom walzen herrührenden einschnitten, rippen (wülsten), vertiefungen oder erhöhungen

Andere

Profile wire, cold drawn or cold drawn and annealed, up to 0.787 mm² in maximum solid cross-sectional area

Andere

Profile wire, cold drawn or cold drawn and annealed, up to 0.787 mm² in maximum solid cross-sectional area

Round spring

Andere

Spring

Other, of a diameter of 0.25 mm or more but less than 0.76 mm

Other, of a diameter of 1.52 mm or more but less than 5.1 mm

Other, of a diameter of 6.5 mm or more

Other alloy steel in ingots or other primary forms; semi-finished products of other alloy steel.

Andere

Aus silicium-elektrostahl:

Andere

Andere, nur warmgewalzt, nicht in rollen (coils):

Other, of a width of 600 mm or more but not exceeding 1,525 mm

Other, of a width exceeding 1,830 mm but not exceeding 2,450 mm

Andere, nur kaltgewalzt:

Mit einer dicke von 0,5 mm bis 1 mm

Mit einer dicke von 3 mm oder mehr

Elektrolytisch verzinkt:

Of a thickness of 0.25 mm or more but less than 0.5 mm

Of a thickness exceeding 1 mm

Of a thickness less than 0.25 mm

Mit einer dicke von 0,5 mm bis 1 mm

Andere:

Andere

Aus silicium-elektrostahl:

Andere

Andere:

Nur kaltgewalzt

Verzinkt:

Of a thickness of 0.25 mm or more but less than 0.5 mm

Of a thickness exceeding 1 mm

Of a thickness of less than 0.25 mm

Mit einer dicke von 0,5 mm bis 1 mm

Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel.

Aus mangan-silicium-stahl

Andere

Of tool steel (other than high speed steel), not tempered or treated and not partly manufactured:

Andere

Of ball-bearing steel

Other, containing indentations, ribs, grooves or other deformations produced during the rolling process

Other, of welding quality wire rods, as defined in Statistical Note 4 to this Chapter

Of a diameter of less than 14 mm

Of a diameter of 19 mm or more

Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel.

Cold-formed

Stabstahl aus mangan-silicium-stahl:

Not cold-formed

Anderer stabstahl, nur warmgewalzt, nur warmgezogen oder nur warmstranggepresst:

Of chipper knife steel, not cold-formed

Mit vom walzen herrührenden einschnitten, rippen (wülsten), vertiefungen oder erhöhungen oder nach dem walzen verwunden:

With a diameter of more than 12 mm but not exceeding 39 mm

Other, of high-nickel alloy steel

With a diameter of less than 76 mm

With a diameter of 152 mm or more but not exceeding 228 mm

Other, of rectangular cross section:

With a maximum cross section of 152mm or more

Anderer stabstahl, nur geschmiedet:

Tool steel

Anderer stabstahl, nur kalthergestellt oder nur kaltfertiggestellt:

Tool steel

Anderer stabstahl

L sections, not further worked than hot-rolled, cold-rolled, drawn or extruded:

Unequal legs

Of a height not exceeding 150 mm

Other H sections, not further worked than hot-rolled, cold-rolled, drawn or extruded

American standard, of a height not exceeding 150 mm

Andere

T sections, not further worked than hot-rolled, cold-rolled, drawn or extruded

Other shapes or sections, not further worked than hot-rolled, cold-rolled, drawn or extruded:

Curved grader blade sections

Andere

L-profile

U-profile

Hohlbohrerstäbe

Round, alloy steel

Other, alloy steel

Andere:

Round, non-alloy steel

Andere

Aus mangan-silicium-stahl

Plated or coated with copper

Andere

Aus schnellarbeitsstahl

Other round, of a diameter not exceeding 1.6 mm, containing by weight less than 0.2% of carbon and more than 0.3% of nickel or more than 0.08% of molybdenum, suitable for electric arc-welding:

Andere

Of a diameter of less than 1 mm

Of a diameter of 1.5 mm or more but less than 3 mm

Other round:

Of a diameter of 1 mm or more but less than 1.5 mm

Of a diameter of 3 mm or more