HS-Codes - 76: ALUMINIUM AND ARTICLES THEREOF
| 7601 | Aluminium in rohform: |
| 7601.A | Nicht legiertes aluminium: |
| - | Slabs |
| - | Andere |
| 7601.B | Aluminiumlegierungen: |
| - | Slabs |
| - | Knüppel |
| - | Andere |
| 7602 | Abfälle und schrott, aus aluminium: |
| 7602.A | Abfälle: |
| - | Turnings, shavings, chips, milling waste, sawdust and filings; waste of coloured, coated or bonded sheets and foil, of a thickness (excluding any backing) not exceeding 0.2 mm |
| - | Other (including factory rejects) |
| - | Scrap |
| 7603 | Pulver und flitter, aus aluminium: |
| - | Pulver ohne lamellenstruktur |
| - | Pulver mit lamellenstruktur; flitter |
| 7604 | Stangen (stäbe) und profile, aus aluminium: |
| 7604.A | Aus nicht legiertem aluminium: |
| 7604.A.A | Bars and rods |
| - | Unassembled, containing not more than 99.3% of aluminium |
| - | Andere |
| 7604.A.B | Profile |
| 7604.A.B.A | Bearing a specific manufacture number, for use in certain types of aircraft |
| - | Unassembled, containing not more than 99.3% of aluminium |
| - | Andere |
| 7604.A.B.B | Conical shapes for reinforcing lateral rudders, for use in certain types of aircraft |
| - | Unassembled, containing not more than 99.3% of aluminium |
| - | Andere |
| 7604.A.B.C | Andere: |
| - | Unassembled, containing not more than 99.3% of aluminium |
| - | Andere |
| 7604.B | Aus aluminiumlegierungen: |
| 7604.B.A | Hohlprofile: |
| - | Hollow profile with:-one closed chamber of aluminum alloy 6063-t5 or 6060-t5,-a wall thickness of not more than 0.7 mm, and-an anodised layer of 10 µm at the surface,for use in the manufacture of board frames of whiteboards, cork boards, easel boards, education boards and display cases |
| - | Andere |
| 7604.B.B | Andere: |
| 7604.B.B.A | Bars and rods |
| - | Bars of aluminium-lithium alloys |
| - | Aluminium alloy rods with a diameter of 300.1 mm or more, but not more than 533.4 mm |
| - | Bars and rods of aluminium alloys containing by weight:- 0.25% or more but not more than 7% of zinc, and- 1% or more but not more than 3% of magnesium, and- 1% or more but not more than 5% of copper, and- not more than 1% of manganeseconsistent with the material specifications ams qq-a-225, of a kind used in aerospace industry (inter alia conforming nadcap and as9100) and obtained by rolling mill process |
| - | Andere |
| 7604.B.B.B | Profile |
| - | Bearing a specific manufacture number, for use in certain types of aircraft |
| - | Conical shapes for reinforcing lateral rudders, for use in certain types of aircraft |
| - | Andere |
| 7605 | Draht aus aluminium: |
| 7605.A | Aus nicht legiertem aluminium: |
| - | Mit einer größten querschnittsabmessung von mehr als 7 mm |
| 7605.A.A | Andere: |
| - | Not alloyed aluminium wire, of a diameter of 2 mm or more but not more than 6 mm, covered with a layer of copper of a thickness of 0.032 mm or more but not more than 0.117 mm |
| - | Andere |
| 7605.B | Aus aluminiumlegierungen: |
| 7605.B.A | Mit einer größten querschnittsabmessung von mehr als 7 mm: |
| - | Aluminium alloy wire with a diameter of 9.50 mm or more but not more than 19.15 mm, in coils, for use in the manufacture of aeronautical fasteners |
| - | Andere |
| - | Andere |
| 7606 | Aluminium plates, sheets and strip, of a thickness exceeding 0.2 mm |
| 7606.A | Quadratisch oder rechteckig: |
| 7606.A.A | Aus nicht legiertem aluminium: |
| - | Aluminium composite panel |
| 7606.A.A.A | Andere: |
| 7606.A.A.A.A | Mit farbe versehen, lackiert oder mit kunststoff überzogen: |
| 7606.A.A.A.A.A | Plates bearing a specific manufacture number, for use in certain types of aircraft |
| - | Not backed, without internal layers of other material |
| - | Andere |
| 7606.A.A.A.A.B | Andere: |
| - | Not backed, without internal layers of other material |
| - | Andere |
| 7606.A.A.A.B | Other, of a thickness of |
| 7606.A.A.A.B.A | Less than 3 mm |
| 7606.A.A.A.B.A.A | Plates bearing a specific manufacture number, for use in certain types of aircraft |
| - | Not backed, without internal layers of other material |
| - | Andere |
| 7606.A.A.A.B.A.B | Andere: |
| - | Not backed, without internal layers of other material |
| - | Andere |
| 7606.A.A.A.B.B | Not less than 3 mm but less than 6 mm |
| 7606.A.A.A.B.B.A | Plates bearing a specific manufacture number, for use in certain types of aircraft |
| - | Not backed, without internal layers of other material |
| - | Andere |
| 7606.A.A.A.B.B.B | Andere: |
| - | Not backed, without internal layers of other material |
| - | Andere |
| 7606.A.A.A.B.C | Not less than 6 mm |
| 7606.A.A.A.B.C.A | Plates bearing a specific manufacture number, for use in certain types of aircraft |
| - | Not backed, without internal layers of other material |
| - | Andere |
| 7606.A.A.A.B.C.B | Andere: |
| - | Not backed, without internal layers of other material |
| - | Andere |
| 7606.A.B | Aus aluminiumlegierungen: |
| 7606.A.B.A | Beverage can body stock, end stock and tab stock |
| - | Beverage can body stock |
| - | Beverage can end stock and tab stock |
| - | Aluminium composite panel |
| 7606.A.B.B | Andere: |
| 7606.A.B.B.A | Mit farbe versehen, lackiert oder mit kunststoff überzogen: |
| 7606.A.B.B.A.A | Plates bearing a specific manufacture number, for use in certain types of aircraft |
| 7606.A.B.B.A.A.A | Not backed, without internal layers of other material |
| - | Of a thickness of not less than 0.8 mm |
| - | Andere |
| - | Andere |
| 7606.A.B.B.A.B | Andere: |
| 7606.A.B.B.A.B.A | Not backed, without internal layers of other material |
| - | For use as body panels in the car industry and of a thickness of not more than 6 mm or for use in the manufacture of aircraft parts and of a thickness of not less than 0.8 mm |
| 7606.A.B.B.A.B.A.A | Andere: |
| - | Hot rolled coils, tension levelled, of a thickness not exceeding 1.5 mm, of a width of not less than 800 mm but not exceeding 2050 mm, for use in the manufacture of aluminium composite panels |
| - | Andere |
| - | Andere |
| 7606.A.B.B.B | Other, of a thickness of |
| 7606.A.B.B.B.A | Less than 3 mm |
| 7606.A.B.B.B.A.A | Plates bearing a specific manufacture number, for use in certain types of aircraft |
| 7606.A.B.B.B.A.A.A | Not backed, without internal layers of other material |
| - | Of a thickness of not less than 0.8 mm |
| - | Andere |
| - | Andere |
| 7606.A.B.B.B.A.B | Andere: |
| 7606.A.B.B.B.A.B.A | Not backed, without internal layers of other material |
| - | For use as body panels in the car industry or for use in the manufacture of aircraft parts and of a thickness of not less than 0.8 mm |
| 7606.A.B.B.B.A.B.A.A | Andere: |
| - | Hot rolled coils, tension levelled, of a thickness not exceeding 1.5 mm, of a width of not less than 800 mm but not exceeding 2050 mm, for use in the manufacture of aluminium composite panels |
| - | Andere |
| - | Andere |
| 7606.A.B.B.B.B | Not less than 3 mm but less than 6 mm |
| - | Plates bearing a specific manufacture number, for use in certain types of aircraft |
| 7606.A.B.B.B.B.A | Andere: |
| 7606.A.B.B.B.B.A.A | Not backed, without internal layers of other material |
| - | For use as body panels in the car industry or for use in the manufacture of aircraft parts |
| - | Andere |
| - | Andere |
| 7606.A.B.B.B.C | Not less than 6 mm |
| - | Plates bearing a specific manufacture number, for use in certain types of aircraft |
| 7606.A.B.B.B.C.A | Sheets of aluminium-lithium alloys |
| 7606.A.B.B.B.C.A.A | Not backed, without internal layers of other material |
| - | For use as body panels in the car industry and with a thickness of 6 mm or for use in the manufacture of aircraft parts |
| - | Andere |
| - | Andere |
| 7606.A.B.B.B.C.B | Andere: |
| 7606.A.B.B.B.C.B.A | Not backed, without internal layers of other material |
| - | For use as body panels in the car industry and with a thickness of 6 mm or for use in the manufacture of aircraft parts |
| - | Andere |
| - | Andere |
| 7606.B | Andere: |
| 7606.B.A | Aus nicht legiertem aluminium: |
| 7606.B.A.A | Plates bearing a specific manufacture number, for use in certain types of aircraft |
| - | Not backed, without internal layers of other material,- in coils or in coiled strips, in cut-to-length sheets, or in the form of circles; of a thickness exceeding 0.2 mm but not exceeding 6 mm;- in plates, of a thickness exceeding 6 mm |
| - | Andere |
| 7606.B.A.B | Andere: |
| - | Not backed, without internal layers of other material,- in coils or in coiled strips, in cut-to-length sheets, or in the form of circles; of a thickness exceeding 0.2 mm but not exceeding 6 mm;- in plates, of a thickness exceeding 6 mm |
| - | Andere |
| 7606.B.B | Aus aluminiumlegierungen: |
| 7606.B.B.A | Plates bearing a specific manufacture number, for use in certain types of aircraft |
| 7606.B.B.A.A | Not backed, without internal layers of other material,- in coils or in coiled strips, in cut-to-length sheets, or in the form of circles; of a thickness exceeding 0.2 mm but not exceeding 6 mm;- in plates, of a thickness exceeding 6 mm |
| - | Of a thickness of not less than 0.8 mm, for use in the manufacture of aircraft parts |
| - | Andere |
| - | Andere |
| 7606.B.B.B | Andere: |
| 7606.B.B.B.A | Not backed, without internal layers of other material,- in coils or in coiled strips, in cut-to-length sheets, or in the form of circles; of a thickness exceeding 0.2 mm but not exceeding 6 mm;- in plates, of a thickness exceeding 6 mm |
| - | For use as body panels in the car industry and of a thickness of not more than 6 mm or for use in the manufacture of aircraft parts and of a thickness of not less than 0.8 mm |
| 7606.B.B.B.A.A | Andere: |
| - | Hot rolled coils, tension levelled, of a thickness not exceeding 1.5 mm, of a width of not less than 800 mm but not exceeding 2050 mm, for use in the manufacture of aluminium composite panels |
| - | Andere |
| - | Andere |
| 7607 | Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0.2 mm |
| 7607.A | Ohne unterlage: |
| 7607.A.A | Nur gewalzt: |
| 7607.A.A.A | Of a thickness of less than 0.021 mm |
| 7607.A.A.A.A | In rolls of a weight not exceeding 10 kg |
| 7607.A.A.A.A.A | Of a thickness of 0.007 mm or more but less than 0.021 mm |
| - | Consigned from Thailand |
| - | Andere |
| - | Andere |
| 7607.A.A.A.B | Andere: |
| - | For household use, of a thickness of not less than 0.008 mm and not more than 0.018 mm, in rolls of a width not exceeding 650 mm |
| - | For household use, of a thickness of not less than 0.007 mm and less than 0.008 mm, whether or not annealed |
| - | For household use, of a thickness of not less than 0.008 mm and not more than 0.018 mm, in rolls of a width exceeding 650 mm, whether or not annealed |
| - | For household use, of a thickness of more than 0.018 mm and less than 0.021 mm, whether or not annealed |
| - | For other uses than household aluminium foil,- of a thickness of not less than 0.007 mm and less than 0.008 mm, whether or not annealed, or,- of a thickness of not less than 0.008 mm and not more than 0.018 mm, in rolls of a width exceeding 650 mm, whether or not annealed, or,- of a thickness of more than 0.018 mm and less than 0.021 mm, whether or not annealed |
| 7607.A.A.A.B.A | Andere: |
| - | Aluminium converter foil |
| - | Household aluminium foil |
| - | Andere |
| 7607.A.A.B | Of a thickness of not less than 0.021 mm but not more than 0.2 mm |
| 7607.A.A.B.A | Aluminium foil in rolls:- having a purity of 99.99% by weight, - of a thickness of 0.021 mm or more but not more than 0.2 mm, - with a width of 500 mm, - with a surface oxide layer by 3 to 4 nm thick, - and with a cubic texture of more than 95% |
| 7607.A.A.B.A.A | Of a thickness of not less than 0.021 mm and not more than 0.045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers |
| - | Of a thickness of not less than 0.03 mm, without internal layers of other material |
| - | Andere |
| 7607.A.A.B.A.B | Of a thickness of not less than 0.021 mm and not more than 0.045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers, for other uses than aluminium household foil |
| - | Of a thickness of not less than 0.03 mm, without internal layers of other material |
| - | Andere |
| 7607.A.A.B.A.C | Andere: |
| - | Of a thickness of not less than 0.03 mm but less than 0.2 mm, without internal layers of other material, in coils or in coiled strips |
| 7607.A.A.B.A.C.A | Of a thickness of 0.2 mm, in coils or in coiled strips, in cut-to-length sheets, or in the form of circles |
| 7607.A.A.B.A.C.A.A | Without internal layers of other material |
| - | Alloyed, for use as body panels in the car industry |
| - | Andere |
| - | Andere |
| - | Andere |
| 7607.A.A.B.B | Plain aluminium foil with the following parameters:- an aluminium content of 99.98% or more- a thickness of 0.070 mm or more but not more than 0.125 mm- with a cubic texture of a kind used for high voltage etching |
| - | Plain aluminium foil with the following parameters:-an aluminium content of 99.98% or more,-a thickness of 0.070 mm or more but not more than 0.125 mm,-with a cubic texture,of a kind used for high voltage etching |
| - | Plain aluminium foil with the following parameters:-an aluminium content of 99.98% or more,-a thickness of 0.070 mm or more but not more than 0.125 mm,-with a cubic texture,of a kind used for high voltage etching |
| 7607.A.A.B.C | Andere: |
| 7607.A.A.B.C.A | Of a thickness of not less than 0.021 mm and not more than 0.045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers |
| - | Of a thickness of not less than 0.03 mm, without internal layers of other material |
| - | Andere |
| 7607.A.A.B.C.B | Of a thickness of not less than 0.021 mm and not more than 0.045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers, for other uses than aluminium household foil |
| - | Of a thickness of not less than 0.03 mm, without internal layers of other material |
| - | Andere |
| 7607.A.A.B.C.C | Aluminium and magnesium alloy strip or foil:- of an alloy conforming to standards 5182-h19 or 5052-h19,- in rolls with an outside diameter of minimum 1 250 mm but not more than 1 350 mm,- of a thickness (tolerance - 0.006 mm) of 0.15 mm, 0.16 mm, 0.18 mm or 0.20 mm,- of a width ( tolerance ± 0.3 mm) of 12.5 mm, 15.0 mm, 16.0 mm, 25.0 mm, 35.0 mm, 50.0 mm or 356 mm, - having a camber tolerance of not more than 0.4 mm/750 mm,- of a flatness measurement: i-unit ±4,- having a tensile strength of more than (5182-h19) 365 mpa or (5052-h19) 320 mpa,- of an elongation a50 of more than (5182-h19) 3% or (5052-h19) 2.5%for use in the manufacture of slats for blinds |
| - | Of a thickness of not less than 0.03 mm but less than 0.2 mm, without internal layers of other material, in coils or in coiled strips |
| 7607.A.A.B.C.C.A | Of a thickness of 0.2 mm |
| 7607.A.A.B.C.C.A.A | Without internal layers of other material |
| - | For use as body panels in the car industry |
| - | Andere |
| - | Andere |
| - | Andere |
| 7607.A.A.B.C.D | Andere: |
| - | Of a thickness of not less than 0.03 mm but less than 0.2 mm, without internal layers of other material, in coils or in coiled strips |
| 7607.A.A.B.C.D.A | Of a thickness of 0.2 mm, in coils or in coiled strips, in cut-to-length sheets, or in the form of circles |
| 7607.A.A.B.C.D.A.A | Without internal layers of other material |
| - | Alloyed, for use as body panels in the car industry |
| - | Andere |
| - | Andere |
| - | Andere |
| 7607.A.B | Andere: |
| 7607.A.B.A | Of a thickness of less than 0.021 mm |
| 7607.A.B.A.A | Of a thickness of 0.007 mm or more but less than 0.021 mm, in rolls of a weight not exceeding 10 kg, not further worked than rolled, embossed |
| - | Consigned from Thailand |
| - | Andere |
| - | Andere |
| 7607.A.B.B | Of a thickness of not less than 0.021 mm but not more than 0.2 mm |
| - | Of a thickness of not less than 0.03 mm but less than 0.2 mm, without internal layers of other material, in coils or in coiled strips |
| 7607.A.B.B.A | Of a thickness of 0.2 mm, in coils or in coiled strips, in cut-to-length sheets, or in the form of circles |
| 7607.A.B.B.A.A | Without internal layers of other material |
| - | Alloyed, for use as body panels in the car industry |
| 7607.A.B.B.A.A.A | Andere: |
| - | Hot rolled coils, alloyed, tension levelled, of a width of not less than 800 mm but not exceeding 2050 mm, for use in the manufacture of aluminium composite panels |
| - | Andere |
| - | Andere |
| - | Andere |
| 7607.B | Auf unterlage: |
| - | Of a thickness (excluding any backing) of less than 0.021 mm |
| 7607.B.A | Of a thickness (excluding any backing) of not less than 0.021 mm but not more than 0.2 mm |
| - | Aluminium composite panel |
| - | Andere |
| 7608 | Rohre aus aluminium: |
| 7608.A | Aus nicht legiertem aluminium: |
| 7608.A.A | With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft |
| - | Unassembled, not welded, containing not more than 99.3% of aluminium |
| - | Andere |
| - | Tubes and pipes, ready for fitting, usable as hydraulic conduits or as conduits for fuel-oil or lubricants for use in certain types of aircraft |
| 7608.A.B | Andere: |
| - | Unassembled, not welded, containing not more than 99.3% of aluminium |
| - | Andere |
| 7608.B | Aus aluminiumlegierungen: |
| 7608.B.A | Welded |
| - | With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft |
| - | Tubes and pipes, ready for fitting, usable as hydraulic conduits or as conduits for fuel-oil or lubricants for use in certain types of aircraft |
| - | Andere |
| 7608.B.B | Andere: |
| 7608.B.B.A | Not further worked than extruded |
| - | With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft |
| - | Seamless aluminium alloyed extruded tubes (aluminum 6061f according to standard astm b241) with:-an outer diameter of 320 mm or more but not more than 400 mm, and-a wall thickness of 8 mm or more but not more than 10 mm,for use in the manufacture of high pressure vessels |
| - | Andere |
| 7608.B.B.B | Andere: |
| - | With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft |
| - | Tubes and pipes, ready for fitting, usable as hydraulic conduits or as conduits for fuel-oil or lubricants for use in certain types of aircraft |
| - | Seamless aluminium alloyed extruded tubes with:- an outer diameter of 60 mm or more but not more than 420 mm, and- a wall thickness of 10 mm or more but not more than 80 mm |
| - | Andere |
| 7609 | Rohrformstücke, rohrverschlussstücke und rohrverbindungsstücke (z.. B.. Bogen, muffen), aus aluminium: |
| - | For use in certain types of aircraft |
| - | Aluminium connecting block for automotive air conditioning systems:-with a t6 hardening,-equipped with round stubs with a circumferential outer groove,-with through or non-through holes, made of profiles with an upper radius of 8 mm or more but not more than 11 mm, and a lower radius of 12 mm or more but not more than 17 mm,-with a distance between holes of 15 mm or more but not more than 22 mm,-with sockets designed for brazing or clamping,-with mounting holes for m6 or m8 mounting screw, threaded or not,-with a width of 5 mm or more but not more than 16 mm,-for connecting a compressor, a condenser, an evaporator, a chiller and other lines |
| - | Flame brazed aluminium block for connecting tubes in automotive heat exchangers and/or turbocharged air coolers and/or automatic transmission coolers:-with extruded, bent connection tubes with an outer diameter of 5 mm or more, but not more than 25 mm,-with a weight of 0.02 kg or more, but not more than 0.25 kg,for use in the manufacture of cooling system in vehicles of chapter 87 |
| - | Machined aluminium components:-containing by weight 0.55%, or more but not more than 0.61% of magnesium,-containing by weight 0.55%, or more but not more than 0.61% of silicon,-with a hardening state of t5 or t6,-with a mass of 0.05 kg or more, but not more than 0.2 kg,for use in the manufacture of co₂ cooling systems in motor vehicles |
| - | Aluminium connection block:-with a weight of 3 g or more but not more than 400 g,-manufactured from 6061-t6 or 6060-t6 or 6082-t6 aluminium grade,-being an integral part of an air conditioning hose assembly or oil cooling line hose assembly or air brake line hose assembly or water cooling line hose assembly,-with holes (sockets) or splines (pilots) or threads that allow installation in an automotive or other air conditioning system (also understood as installation in the line),-with sockets designed for brazing or fastening,-with at least 1 through-hole with a diameter of 3 mm or more but not more than 25 mm,for the manufacture of automotive cooling and air conditioning systems |
| - | Andere |
| 7610 | Konstruktionen und konstruktionsteile (z.. B.. Brücken und brückenelemente, türme, gittermaste, pfeiler, säulen, gerüste, dächer, dachstühle, tore, türen, fenster, und deren rahmen und verkleidungen, tor- und türschwellen, geländer), aus aluminium, ausgenommen vorgefertigte gebäude der position 9406; zu konstruktionszwecken vorgearbeitete bleche, stangen (stäbe), profile, rohre und dergleichen, aus aluminium: |
| - | Tore, türen, fenster, und deren rahmen und verkleidungen, tor- und türschwellen |
| 7610.A | Andere: |
| - | Bridges and bridge-sections, towers and lattice masts |
| 7610.A.A | Andere: |
| - | Bars, rods, profiles (whether or not hollow), tubes, pipes, unassembled, not welded, made from aluminium, whether or not alloyed, containing not more than 99.3% of aluminium |
| 7610.A.A.A | Andere: |
| - | Products attached (e.g. by welding or fasteners) to form subassemblies |
| - | Products in a packaged kit with the necessary parts to assemble a finished product without further finishing or fabrication of the parts (‘finished goods kit’) |
| - | Andere |
| 7611 | Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment |
| 7612 | Sammelbehälter, fässer, trommeln, kannen, dosen und ähnliche behälter (einschließlich verpackungsröhrchen und tuben), aus aluminium, für stoffe aller art (ausgenommen verdichtete oder verflüssigte gase), mit einem fassungsvermögen von 300 l oder weniger, ohne mechanische oder wärmetechnische einrichtungen, auch mit innenauskleidung oder wärmeschutzverkleidung: |
| - | Tuben |
| 7612.A | Andere: |
| - | Containers of a kind used for aerosols |
| - | Manufactured from foil of a thickness not exceeding 0.2 mm |
| - | Andere |
| 7613 | Behälter aus aluminium für verdichtete oder verflüssigte gase: |
| - | Bottles for inflating escape chutes, intended for use in certain types of aircraft |
| - | Andere |
| 7614 | Litzen, kabel, seile und ähnliche waren, aus aluminium, ausgenommen isolierte erzeugnisse für die elektrotechnik: |
| - | Mit stahlseele |
| - | Andere |
| 7615 | Haushaltsartikel, hauswirtschaftsartikel, sanitär-, hygiene- oder toilettenartikel, und teile davon, aus aluminium; schwämme, putzlappen, handschuhe und ähnliche waren, zum scheuern, polieren oder dergleichen, aus aluminium: |
| 7615.A | Haushaltsartikel, hauswirtschaftsartikel, und teile davon; schwämme, putzlappen, handschuhe und ähnliche waren, zum scheuern, polieren oder dergleichen: |
| 7615.A.A | Cast |
| - | Aluminium radiators and elements or sections of which such radiator is composed, whether or not such elements are assembled in blocks |
| - | Andere |
| - | Manufactured from foil of a thickness not exceeding 0.2 mm |
| 7615.A.B | Andere: |
| - | Aluminium radiators and elements or sections of which such radiator is composed, whether or not such elements are assembled in blocks |
| - | Andere |
| - | Sanitär-, hygiene- oder toilettenartikel und teile davon |
| 7616 | Andere waren aus aluminium: |
| 7616.A | Stifte, nägel, krampen, klammern (ausgenommen klammern der position 8305), schrauben, bolzen, muttern, schraubhaken, niete, splinte, keile, unterlegscheiben und ähnliche waren: |
| - | Self-locking bolts and nuts (of the type "hi-lok") |
| 7616.A.A | Andere: |
| - | For use in certain types of aircraft |
| - | Andere |
| 7616.B | Andere: |
| - | Gewebe, gitter und geflechte, aus aluminiumdraht |
| 7616.B.A | Andere: |
| 7616.B.A.A | Cast |
| - | Collars, flanges and other devices for fixing, jointing, clamping or spacing, for use in certain types of aircraft |
| - | "quick change" apparatus for transforming passenger transport aeroplanes into goods transport aeroplanes and vice versa, for use in certain types of aircraft |
| 7616.B.A.A.A | Andere: |
| - | Aluminium radiators and elements or sections of which such radiator is composed, whether or not such elements are assembled in blocks |
| - | Andere |
| 7616.B.A.B | Andere: |
| 7616.B.A.B.A | Hand-made |
| - | Aluminium radiators and elements or sections of which such radiator is composed, whether or not such elements are assembled in blocks |
| - | Andere |
| 7616.B.A.B.B | Andere: |
| - | "quick change" apparatus for transforming passenger transport aeroplanes into goods transport aeroplanes and vice versa, for use in certain types of aircraft |
| - | Plates and sheets of variable thickness of widths of 1 200 mm or more, for use in certain types of aircraft |
| - | Connecting components for use in the production of helicopter tail rotor shafts |
| - | Television pedestal stands with or without bracket for fixation to and stabilisation of television cabinet case/body |
| 7616.B.A.B.B.A | Andere: |
| - | Aluminium radiators and elements or sections of which such radiator is composed, whether or not such elements are assembled in blocks |
| - | Andere |
Need help to the find appropriate HS Code ?
or