HS-Codes - 85: ELECTRICAL MACHINERY AND EQUIPMENT AND PARTS THEREOF; SOUND RECORDERS AND REPRODUCERS, TELEVISION IMAGE AND SOUND RECORDERS AND REPRODUCERS, AND PARTS AND ACCESSORIES OF SUCH ARTICLES

Elektromotoren und elektrische generatoren, ausgenommen stromerzeugungsaggregate:

Synchronous motors of an output not exceeding 18 w

Synchronous motor for a dishwasher with a water flow control mechanism with- a length without axle of 24 mm (+/- 0.3),- a diameter of 49.3 mm (+/- 0.3)- a rated voltage of 220 v ac or more but not more than 240 v ac,- a rated frequency of 50 hz or more but not more than 60 hz,- an input power of not more than 4 w,- a rotation speed of 4rpm or more but not more than 4.8rpm,- an output torque of not less than 10kgf/cm

Linear actuator for automotive electric seat adjustment applications: -consisting of a permanently excited dc motor with an integrated gear mechanism and leadscrew, -whether brushed or brushless, -whether or not with electronic control unit, -whether or not with hall effect sensor, -with a nominal voltage of 8 v or higher but not higher than 16 v, -with a rated output mechanical power not exceeding 20 w, and -with a specified temperature range from -40 °c to 160 °c, for use in the manufacture of automotive components for car's seats

Electric controller for blinds of cooler, with an operating dc voltage of 9 v or more but not more than 16 v and a maximum power of less than 18 w, containing at least: -a printed circuit board, -an electric stepper motor, -a connector, -a plastic cover, for use in the manufacture of goods of chapter 87

Andere:

For use in certain types of aircraft

Ac motors

Andere

For use in certain types of aircraft

Worm axis motor for automotive electric seat adjustment applications: -consisting of a permanently excited dc motor with a worm wheel, -whether brushed or brushless, -whether or not with electronic control unit, -whether or not with hall effect sensor, -with a nominal voltage of 8 v or more but not more than 16 v, -with a rated output mechanical power not exceeding 35 w, and -with a specified temperature range from -40 °c to 160 °c, for use in the manufacture of automotive components for car's seats

Rotary actuator for automotive electric seat adjustment applications: -consisting of a permanently excited dc motor with an integrated gear mechanism, -whether brushed or brushless, -whether or not with electronic control unit, -whether or not with hall effect sensor, -with a nominal voltage of 8 v or more but not more than 16 v, -with a rated output mechanical power not exceeding 35 w, and -with a specified temperature range from -40 °c to 160 °c, for use in the manufacture of automotive components for car's seats

Dc motor:- with a speed rotation of not more than 7 000 rpm without load,- with a nominal voltage of not more than 18 v,- with a maximum power of 24 w,- for a specific temperature range from -40°c to 160°c,- with or without a gear connection,- with or without a mechanical attachment interface,- with 2 electrical connections,- with a maximum torque of 100 nm

Dc motor- with a rotor speed of 3 500 rpm or more but not more than 5 000 rpm loaded and not more than 6 500 rpm when not loaded- with a power supply voltage of 100 v or more but not more than 240 vfor use in the manufacture of electric fryers

Electric turbocharger actuator, with:- a dc motor,- an integrated gear mechanism,- a (pulling)force of 200 n or more at a minimum of 140°c elevated ambient temperature,- a (pulling) force of 250 n or more in each position of its stroke,- an effective stroke of 15 mm or more but not more than 25 mm,- with or without an on-board diagnostics interface

Permanently excited dc motor with- a multiple-phase winding,- an external diameter of 24 mm or more but not more than 38 mm,- a rated speed of not more than 12 000 rpm,- a power supply voltage of 8 v or more but not more than 27 v,- with or without a pulley,- with or without a gear wheel

Andere

Of an output exceeding 735 w but not exceeding 150 kw, for use in civil aircraft

Universal ac/dc motor, rotating: -with a nominal supply voltage of 230 v, -with a power of more than 37.5 w but not more than 2 000 w, -with a stator cross-section of 93 mm or more but not more than 103 mm and a thickness of 15 mm or more but not more than 45 mm, and -with or without a worm gear, gears or a gearbox, for the production of a torque to a transmission shaft for small domestic appliances

Universal ac/dc motor, rotating: -with a nominal supply voltage of 230 v, -with a power of more than 37.5 w but not more than 700 w, -with a stator cross-section of 49 mm or more but not more than 59 mm and a thickness of 15 mm or more but not more than 45mm, and -with or without a worm gear, gears or a gearbox, for the production of a torque to a transmission shaft for small domestic appliances

Andere gleichstrommotoren; gleichstromgeneratoren, ausgenommen fotovoltaische generatoren:

Motors of an output exceeding 735 w, dc generators, for use in civil aircraft

Andere:

Motor for automotive electric seat adjustment applications: -with a shaft output on both motor sides, -consisting of a permanently excited dc motor, -whether brushed or brushless, -whether or not with electronic control unit, -whether or not with hall effect sensor, -with a nominal voltage of 8 v or more but not more than 16 v, -with a rated output mechanical power not exceeding 120 w, and -with a specified temperature range from -40 °c to 160 °c, for use in the manufacture of automotive components for car's seats

Brushless dc electric motors:- with a rated power of 240 w or more, but not more than 260 w,- with a voltage of 24 v or higher, but not higher than 52 v,- with a torque of 30 nm or more, but not more than 62 nm,- with a lin, uart or can communication interface,- with an internal planetary gearbox with fixed or variable ratio or direct drive,- with a housing made of aluminum or aluminium alloy,- with a weight of 1.5kg or more, but not more than 6kg,- adapted for mounting in the front or rear bicycle wheel,for use in the manufacture of e-bikes

Dc motor with or without commutator, for driving hand-held power tools, lawn mowers or home appliances, with:-an external diameter of 24.2 mm or more, but not more than 140 mm,-a rated speed of 3300 rpm or more, but not more than 26200 rpm,-a rated supply voltage of 3.6 v or more, but not more than 230 v,-an output power of more than 37.5 w , but not more than 2400 w,-a free load current of not more than 20.1 a,-a maximum efficiency of 50% or more,

Ready for installation in vehicles or equipment of headings 8432 and 8433, brushless and permanently excited direct current motor with:-a specified speed of not more than 4 100 rpm,-a minimum output of 400 w, but not more than 1.3 kw (at 12 v), or with a minimum output of 750 w but not more than 1.55 kw (at 36 v),-a flange diameter of 85 mm or more but not more than 200 mm,-a maximum length of 335 mm, measured from the beginning of the shaft to the outer ending,-a housing length of not more than 265 mm, measured from the flange to the outer ending,-a maximum of two-piece (basic housing including electric components and flange with minimum 2 and maximum 11 bore holes) aluminium diecast or sheet steel housing whether or not with a sealing compound (groove with an o-ring and grease),-a stator with single t-tooth design and single coil windings in 9/6 or 12/8 topology, and-surface magnets,-whether or not with electronic power steering controller,-whether or not with pulley,-whether or not with rotor position sensor

Power transmission device for controlling the output of exhaust gas turbochargers, consisting of:- a dc motor of an output not exceeding 600 w,- for usage with a supply voltage of 8 v or more but no more than 48 v,- with motor connection (plug-in connection),- whether or not with position sensor,- whether or not with integrated control and power electronics,- whether or not with spring mechanism for resetting the lever,- built in a housing with reduction gear and lever attached to the motor drive shaft, or- built in a housing with threads integrated into the rotor of the motor for linear movement of the integrated control rod

Mit einer leistung von mehr als 750 w bis 75 kw:

Andere:

Ready for installation in vehicles or equipment of headings 8432 and 8433, brushless and permanently excited direct current motor with:-a specified speed of not more than 4 100 rpm,-a minimum output of 400 w, but not more than 1.3 kw (at 12 v), or with a minimum output of 750 w but not more than 1.55 kw (at 36 v),-a flange diameter of 85 mm or more but not more than 200 mm,-a maximum length of 335 mm, measured from the beginning of the shaft to the outer ending,-a housing length of not more than 265 mm, measured from the flange to the outer ending,-a maximum of two-piece (basic housing including electric components and flange with minimum 2 and maximum 11 bore holes) aluminium diecast or sheet steel housing whether or not with a sealing compound (groove with an o-ring and grease),-a stator with single t-tooth design and single coil windings in 9/6 or 12/8 topology, and-surface magnets,-whether or not with electronic power steering controller,-whether or not with pulley,-whether or not with rotor position sensor

Mit einer leistung von mehr als 75 kw bis 375 kw:

Of an output exceding 150 kw, for use in certain types of aircraft

Andere

Generators for use in civil aircraft

Andere einphasen-wechselstrommotoren:

Of an output exceeding 735 w, for use in civil aircraft

Electric ac motor, single-phase, with:-a rated power of 120 w or more but not more than 150 w,-an input power of 280 w or more but not more than 350 w,-an external diameter without bracket connector and pulley of 145 mm or more but not more than 160 mm,-a rated speed of 2 680 rpm or more but not more than 3 000 rpm,-a weight of 4.2 kg or more but not more than 4.6 kg,-pulleys, a spindle and a tachometer,for use in the manufacture of home appliance products

Electric ac motor, single-phase, with:-a rated power of 300 w or more but not more than 370 w,-an input power of 600 w or more but not more than 700 w,-an external diameter without bracket and connector of 150 mm or more but not more than 170 mm,-a rated speed of 15 000 rpm or more but not more than 19 000 rpm,-a weight of 4.8 kg or more,-a pulley,for use in the manufacture of home appliance products

Electric ac motor, single-phase, with:-a rated power of 275 w or more but not more than 325 w,-an output power of 550 w or more but not more than 600 w,-an input power of 800 w or more but not more than 1 000 w,-an external diameter of more than 150 mm but not more than 170 mm without the bracket,-a rated speed of more than 16 000 rpm but not more than 18 000 rpm,-a weight of 3.4 kg or more but not more than 3.7 kg,-a pulley,for use in the manufacture of home appliance products

Andere

Of an output not exceeding 150 kw, for use in civil aircraft

Electric drive for motor vehicles, with an output of not more than 315 kw:- with an ac or dc motor with or without transmission,- with or without power electronics

Andere

Mit einer leistung von 750 w oder weniger:

Of an output of less than 750 w, for use in certain types of aircraft

Electric ac motor, three-phase, with:-a rated power of 280 w or more but not more than 320 w,-an output power of 480 w or more but not more than 540 w,-an input power of 800 w or more but not more than 900 w,-an external diameter of 150 mm or more but not more than 170 mm,-a rated speed of 15 000 rpm or more but not more than 20 000 rpm,-a weight of 6 kg or more but not more than 6.4 kg,-a pulley and a tachometer,for use in the manufacture of home appliance products

Automotive-ready brushless permanently excited magnet synchronous ac-motor with -a specified speed of not more than 7 000 rpm, -a power rating of 400 w or more but not more than 1.8 kw (at 12 v), -a flange diameter of 80 mm or more, but not more than 200 mm, -a maximum length of not more than 220 mm, measured from the beginning of the shaft to its outer end, -a housing length of not more than 180 mm, measured from the flange to the outer end, -a steel sheet or die-cast aluminium basic housing consisting of not more than two parts, including electrical components and a flange with two or more but not more than 11 holes, whether or not with a sealing connection (groove with o-ring and protective grease or liquid seal interface), -a stator with single t-tooth design and single coil winding with 12/10 or 12/8 topology and surface magnets

Mit einer leistung von mehr als 750 w bis 75 kw:

For use in civil aircraft

Ac synchronous servo motor with resolver and brake for a maximum speed of not more than 6 000rpm,with:- an output of 340w or more but not more than 7.4kw,- a flange of dimensions of not more than 180mm × 180mm, and- a length from flange to extreme end of resolver of not more than 271mm

Andere

For use in civil aircraft

Of an output exceeding 37 kw but not exceeding 75 kw

Andere

Traction motors

Ac traction motor of the interior permanent magnet synchronous motor (ipmsm) type with:-a torque output of 200 nm or more, but not more than 400 nm,-a power output of 50 kw or more, but not more than 200 kw ,-a rotation speed of no more than 15 000 rpm,for use in the manufacture of electric vehicles

Permanent magnet traction ac motor, with:-a continuous power of 110 kw or more but not more than 150 kw,-a liquid cooled system,-a total length of 460 mm or more but not more than 590 mm,-a total width of 450 mm or more but not more than 580 mm,-a total height of 490 mm or more but not more than 590 mm,-a weight of not more than 310 kg,-4 mounting points

Andere

Exceeding 75 kw but not exceeding 375 kw

Of an output exceeding 150 kw, for use in certain types of aircraft

Exceeding 375 kw but not exceeding 750 kw

Andere

For use in certain types of aircrafts

Wechselstromgeneratoren, ausgenommen fotovoltaische generatoren:

Of an output not exceeding 7.5 kva

Andere

For use in civil aircraft

Mit einer leistung von mehr als 75 kva bis 375 kva:

Ac, 3-phase generator, with:-a continuous power of 147 kva or more but not more than 222 kva,-a continuous torque of 650 nm or more but not more than 900 nm,-a maximum working speed of 2700 revolutions per minute (rpm),-a liquid cooled system,-a length of 100 mm or more but not more than 200 mm,-a width of 550 mm or more but not more than 650 mm,-a height of 550 mm or more but not more than 650 mm,-weighing of not more than 150 kg

Mit einer leistung von mehr als 375 kva bis 750 kva:

Andere

Fotovoltaische gleichstromgeneratoren:

Mit einer leistung von mehr als 50 w

Stromerzeugungsaggregate und elektrische rotierende umformer:

Mit einer leistung von 75 kva oder weniger:

For use in civil aircraft

Of an output exceeding 7.5 kva but not exceeding 75 kva

Andere

For use in civil aircraft

Mit einer leistung von mehr als 375 kva:

For use in civil aircraft

Of an output exceeding 750 kva but not exceeding 2 000 kva

Andere

For use in civil aircraft

Stromerzeugungsaggregate, angetrieben durch kolbenverbrennungsmotor mit fremdzündung:

For use in civil aircraft

Of an output exceeding 7.5 kva but not exceeding 375 kva

Andere

For use in civil aircraft

Mit einer leistung von mehr als 750 kva

Andere

Windgetrieben:

Utility scale wind turbines of an electrical power generation capacity – either in onshore or offshore applications - equal to or in excess of 1.00 megawatt, fitted in a steel wind tower and a nacelle, where the tower is tubular, whether or not tapered, whether or not assembled, whether or not including an embedded tower foundation section, whether or not joined with rotor blades, designed to support the nacelle and rotor blades, and with a minimum height of 50 meters measured from the base of the tower to the bottom of the nacelle when the tower is fully assembled

Andere:

Andere

Turbo-generators

Andere

For use in civil aircraft

Elektrische rotierende umformer:

Andere

Non-magnetic retaining rings

Andere

For use in certain types of aircraft

Andere:

For use in certain types of aircraft

Rotor, at the inner side provided with one or two magnetic rings (uniform or sectional) whether or not incorporated in a steel ring or bearing mounted in steel housing

Andere:

Andere:

Stator for brushless motor of electrical power steering with a roundness tolerance of 50 μm

Silicone or plastic keyboards, comprising:-parts of common metal, and-whether or not comprising parts of plastic,-epoxy resin reinforced with fiberglass or wood,-whether or not printed or surface-treated,-with or without electrical conductors-with or without a membrane bonded to the keyboard,-with or without mono or multilayer protective film

Stator for brushless motor, with:-an internal diameter of 206.6 mm (± 0.5)-an external diameter of 265.0 mm (± 0.2) and-a width of 37.2 mm or more but not more than 47.8 mmof a kind used in the manufacture of washing machine, washer-dryer or dryer equipped with direct drive drums

Pressure casted outer housing of an electrical motor:-of en ac-47100 aluminum,-with overmolded bearing sleeves of martensitic stainless steel and assembled sealing caps of stainless steel,-shot-blasted and machined,-a rotor chamber, leakproof to the degree of 3 ml per minute or less under 2.75 bar pressure,-with a hardness of 70 hbw or more (2.5/62.5, according to iso 6506)-with a tensile strength of 240 n/mm² or more,-with a height of 245 mm or more, but not more than 360 mm,-with a width of 360 mm or more, but not more than 525 mm,-with a length of 345 mm or more, but not more than 450 mm,-with a weight of 6.4 kg or more, but not more than 8.3 kg

Stator body of stacked electrical sheet having:-an inner diameter of 18 mm or more, but not more than 35 mm,-an outer diameter of 35 mm or more, but not more than 65 mm, and-a length of 20 mm or more, but not more than 65 mm-whether or not incorporated in a housing

Elektrische transformatoren, elektrische stromrichter (z.. B.. Gleichrichter) sowie drossel- und andere selbstinduktionsspulen:

Inductors, whether or not connected with a capacitor

Andere

For use in civil aircraft

Transformatoren mit flüssigkeitsisolation:

Mit einer leistung von mehr als 650 kva bis 10 000 kva:

Exceeding 1 600 kva but not exceeding 10 000 kva

Andere transformatoren:

Measuring transformers

For use in civil aircraft

Andere:

Andere

For use in civil aircraft

Switching transformers, having a power handling capacity of not more than 1 kva for use in the manufacture of static converters

Andere

For use in civil aircraft

Mit einer leistung von mehr als 16 kva bis 500 kva:

Andere

Stromrichter:

For use in civil aircraft

Andere:

For use in civil aircraft

Inverters

For use in civil aircraft

Having a power handling capacity exceeding 7.5 kva

Andere

For use in civil aircraft

Andere drosselspulen und andere selbstinduktionsspulen

Of transformers and inductors

Steel laminations and cores, whether or not stacked or wound

Of static converters

Dauermagnete und waren, die dazu bestimmt sind, nach magnetisierung dauermagnete zu werden:

Containing neodymium, praseodymium, dysprosium or samarium

Andere:

Bars in the form of arched rectangles, containing alloy containing neodymium, with:-a length of 15 mm or more but not more than 52 mm,-a width of 5 mm or more but not more than 42 mm,-whether or not coated or passivated with a surface treatment,intended to become permanent magnets after magnetisation

Permanent magnets of an alloy of neodymium, either in the shape of a rectangle, whether or not rounded, whether or not coated or passivated with a surface treatment, with:-a rectangular or a trapezoidal cross-section,-a length of not more than 140 mm,-a width of not more than 90 mm and-a thickness of not more than 55 mm,or in the shape of an arched rectangle with:-a length of not more than 75 mm,-a width of not more than 40 mm,-a thickness of not more than 7 mm and-a radius of curvature of more than 86 mm but not more than 241 mm, -layers of nickel and copperor in the shape of a disc with:-a diameter of not more than 90 mm,-whether or not a hole in the centre

Articles in shape of flat bars, arched bars, quarter sleeves or trapezoid whether or not arched, rounded corners or oblique sides made of ferrite, or cobalt, or samarium or other rare-earth metals, or their alloy,- whether or not overmolded with polymers, - whether or not coated or passivated with a surface treatment,with:- a length of 5 mm or more, but not more than 60 mm,- a width of 5 mm or more, but not more than 40 mm,- a thickness of 3 mm or more, but not more than 15 mm,intended to become permanent magnets after magnetisation

Articles of an alloy of neodymium, or an alloy of samarium,- whether or not coated or passivated with a surface treatment,- whether or not covered with zinc,- in the shape of rectangles,with:- a length of 13.8 mm or more but not more than 45.2 mm,- a width of 7.8 mm or more but not more than 25.2 mm,- a height of 1.3 mm or more but not more than 4.7 mm,intended to become permanent magnets after magnetisation

Two permanent magnets made of a praseodymium-neodymium alloy, in a rectangular steel holder with an outer casing of rubber with outer dimensions:-a length of 200 mm or more but not more than 205 mm,-a width of 58 mm or more but not more than 62 mm,-a height of 25 mm or more but not more than 30 mm,with a stud mounted in the middle

Andere:

Andere:

Andere

Permanent magnets of agglomerated ferrite

Andere

For use in certain types of aircraft

Articles of agglomerated ferrite in the shape of a disc, whether or not coated or passivated with a surface treatment, with:- a diameter of not more than 120 mm,- a hole in the centre,intended to become permanent magnets after magnetisation with a remanence between 245 mt and 470 mt

Articles of agglomerated ferrite in the shape of arched rectangles,- whether or not coated or passivated with a surface treatment,- whether or not with rounded corners,with:- a length of 9 mm or more but not more than 101 mm,- a width of 9 mm or more but not more than 101 mm,- a thickness of 1.85 mm or more but not more than 15.15 mm,intended to become permanent magnets after magnetisation

Andere

For use in certain types of aircraft

Electromagnetic clutch:-transmitting torque from the motor shaft to the cutting device pulley,-containing field coil, rotor, hub and armature,-with an operating voltage of 12 v-a current of 3.93 a current or more but not more than 6.86 a,-a resistance of 1.84 ohm or more but not more than 3.05 ohm (operating at 20 °c),-a static torque of 108 nm or more but not more than 305 nmfor use in the manufacture of rider type self-propelled mowers

Andere, einschließlich teile:

Electromagnets of a kind used solely or principally for magnetic resonance imaging apparatus other than electromagnets of heading 9018

For use in certain types of aircraft

Electromagnetic lifting heads

Andere

For use in certain types of aircraft

Andere

Manganese dioxide

Cylindrical cells

Andere:

Andere

Silberoxidelemente und -batterien

Cylindrical cells

Andere:

Lithium-iodine or lithium-silver vanadium oxide single cell battery of dimensions of not more than 28 mm × 45 mm × 15 mm and a capacity of not less than 1.05 ah

Luft-zink-elemente und -batterien

Dry zinc-carbon batteries of a voltage of 5.5 v or more but not exceeding 6.5 v

Teile

Blei-akkumulatoren von der zum starten von kolbenverbrennungsmotoren verwendeten art (starterbatterien):

For use in civil aircraft

Andere:

Andere

Working with liquid electrolyte

Andere

For use in civil aircraft

Nickel-cadmium-akkumulatoren:

For use in civil aircraft

Andere:

Andere

For use in civil aircraft

Lithium-ionen-akkumulatoren:

Cylindrical lithium-ion-accumulators or modules with:- a nominal capacity of 8.8 ah or more, but not more than 18 ah,- a nominal voltage of 36 v or more, but not more than 48 v,- a power of 300 wh or more, but not more than 648 wh,for use in the manufacture of electric bicycles

Cylindrical rechargeable lithium-ion polymer accumulator module with: -a cable, -a connector, -1 or 2 cells, -a charge control module or ntc temperature sensor, -a fuse, -a weight of 37.3 g or more but not more than 91.5 g, -a nominal voltage of 3.2 v, -a battery capacity of 1 100 mah or more but not more than 2 200 mah, for the manufacture of automatic emergency call devices for passenger cars

Modules for the assembly of electric accumulators using lithium ferrophosphate technology (lfp) with:-a length of 820 mm or more, but not more than 882 mm,-a width of 390 mm or more, but not more than 655 mm,-a height of 110 mm or more, but not more than 137 mm,-a weight of 60 kg or more, but not more than 165 kg, and-a power of 11 300 wh or more, but not more than 29 360 wh

A lithium-ion-rechargeable battery pack in a specific housing suitable for operating in digital cameras, having:-­a length of 50 mm or more but not more than 120 mm,-­a width of 35 mm or more but not more than 80 mm,-­a height of 15 mm or more but not more than 45 mm,-a weight of 0.040 kg or more but not more than 0.085 kg, and-­a capacity of not more than 2200 mah

Lithium-ion battery module or accumulator, with:- a length of 150mm or more, but not more than 1 310mm,- a width of 100mm or more, but not more than 1 000mm,- a height of 200mm or more, but not more than 1 500mm,- a weight of 50kg or more, but not more than 200kg,- cells of a nominal capacity of 58 ah or more but not more than 500ah,- a nominal output voltage of 230 v ac or 45 v or more but not more than 980 v dc

Modules for the assembly of lithium-ion battery packs, with:-a length of 298 mm or more, but not more than 500 mm,-a width of 33.5 mm or more, but not more than 209 mm,-a height of 75 mm or more, but not more than 228 mm,-a weight of 3.6 kg or more, but not more than 17 kg,-a power of 458 wh or more, but not more than 3 510 wh, and-a voltage of less than 45 v or more than 70 v

Prismatic lithium-ion electric accumulator with:-a width of 120.0 mm or more but not more than 305.0 mm,-a thickness of 12.0 mm or more but not more than 67.0 mm,-a height of 72.0 mm or more but not more than 126.0 mm,-a nominal voltage of 3.6 v or more but not more than 3.75 v, and-a nominal capacity of 6.9 ah or more not more than 265 ah,for use in the manufacture of rechargeable electric vehicle batteries

Lithium-ion rechargeable batteries, with:-a length of 700 mm or more, but not more than 2 820 mm,-a width of 935 mm or more, but not more than 1 660 mm,-a height of 85 mm or more, but not more than 700 mm,-a weight of 250 kg or more, but not more than 700 kg,-a power of not more than 175 kwh,-a nominal voltage of 320 v or more, but not more than 430 v

Andere

For use in civil aircraft

Teile:

For use in civil aircraft

Andere:

Top cap or housing made of aluminium or ferrous alloy or stainless steel: -whether or not including parts made of aluminum and aluminium alloy,-with or without sealing elements or other elements made of polymer material,-with or without a "current interrupt device " and an "evacuation valve"-with or without plastic sockets-with an outer diameter of 17 mm or more, but not more than 18 mm,or rectangular with:-length not greater than 450 mm,-width not greater than 200 mm, and-hight not greater than 150 mm,for use in the manufacture of lithium-ion batteries

Staubsauger:

Mit einer leistung von 1 500 w oder weniger und einem fassungsvermögen des staubbehälters von 20 l oder weniger

Andere staubsauger

Electronic circuit cards that- are connected by wire or radio frequency to each other and the motor controller card, and- regulate the functioning (switching on or off and suction capacity) of vacuum cleaners according to a stored program,- whether or not fitted with indicators that display the functioning of the vacuum cleaner (suction capacity and/or dust bag full and/or filter full)

Elektromechanische haushaltsgeräte mit eingebautem elektromotor, ausgenommen staubsauger der position 8508:

Andere geräte

Rasierapparate, haarschneide- und schermaschinen sowie haarentferner (epilatoren), mit eingebautem elektromotor:

Haarschneide- und schermaschinen

Teile

Zündkerzen:

Andere

For use in civil aircraft

Zündverteiler; zündspulen:

Igniter integrated coil assembly with:- an igniter,- a coil on plug assembly with an integrated mounting bracket,- a housing,- a length of 90 mm or more but not more than 200 mm (+/- 5 mm),- an operating temperature of -40 °c or more but not more than 130 °c,- a voltage of 10.5 v or more, but not more than 16 v

Andere

For use in civil aircraft

Andere lichtmaschinen:

Andere

For use in civil aircraft

Andere

For use in certain types of aircraft

Elektrische beleuchtungs- und signalgeräte (ausgenommen waren der position 8539), scheibenwischer, scheibenentfroster und vorrichtungen gegen das beschlagen der fensterscheiben, von der für kraftfahrzeuge oder fahrräder verwendeten art:

Andere beleuchtungs- und sichtsignalgeräte:

Lighting module, containing at least:- two leds,- glass or plastic lenses, focusing/scattering the light emitted by the leds,- reflectors redirecting the light emitted by the leds,in an aluminium housing with a radiator, mounted at a bracket with an actuator

Electrical component with light guide integrated with led, for motor vehicles with:-two parallel ribs in the front area with a distance between them of 1.4 mm or more but not more than 1.8 mm, -four holes with the dimension of 7.3 mm or more but not more than 7.9 mm in the short direction of the guide, and-a 3 pines connector,for use in the manufacture of automotive components

Andere

Burglar alarms of a kind used for motor vehicles

Warning buzzer for parking sensor system in a plastic casing operating on the piezo-mechanic principle, containing:- a printed circuit board,- a connector,- whether or not a metal holderfor use in the manufacture of goods of chapter 87

Scheibenwischer, scheibenentfroster und vorrichtungen gegen das beschlagen der fensterscheiben:

Andere

Of apparatus of subheading 8512 30 10

Tragbare elektrische leuchten zum betrieb mit eigener stromquelle (z.. B.. Primärbatterien, akkumulatoren oder dynamos), ausgenommen beleuchtungsgeräte der position 8512:

Teile

Widerstandsöfen mit indirekter beheizung:

Andere:

Andere

Induction furnaces and ovens

Andere öfen:

Of a kind used solely or principally for the manufacture of printed circuits or printed circuit assemblies

Plasma- und vakuum-lichtbogenöfen:

Andere

Of a kind used solely or principally for the manufacture of printed circuits or printed circuit assemblies

Andere apparate zum warmbehandeln von stoffen mittels induktion oder dielektrischer erwärmung

Of other furnaces and ovens of subheadings 8514 31 10, 8514 32 10 or 8514 39 10

Löt- und schweißmaschinen, -apparate und -geräte (auch wenn sie zum schneiden verwendbar sind), elektrisch (auch mit elektrisch beheiztem gas) oder mit laser-, licht- oder anderem photonenstrahl, mit ultraschall, elektronenstrahl, magnetischen impulsen oder plasmastrahl arbeitend; elektrische maschinen, apparate und geräte zum spritzen schmelzflüssiger metalle oder cermets:

Lötkolben und lötpistolen

Wave soldering machines of a kind used solely or principally for the manufacture of printed circuit assemblies

Maschinen, apparate und geräte zum widerstandsschweißen von metallen:

Andere

Voll- oder teilautomatische

For manual welding with coated electrodes, complete with welding or cutting devices, and consigned with

Generators or rotary converters or static converters, rectifiers or rectifying apparatus

Andere maschinen, apparate und geräte:

Andere

Of wave soldering machines of subheading 8515 19 10

Silicone or plastic keyboards, comprising:-parts of common metal, and-whether or not comprising parts of plastic,-epoxy resin reinforced with fiberglass or wood,-whether or not printed or surface-treated,-with or without electrical conductors-with or without a membrane bonded to the keyboard,-with or without mono or multilayer protective film

Elektrische warmwasserbereiter und tauchsieder; elektrische geräte zum raum- oder bodenbeheizen oder zu ähnlichen zwecken; elektrowärmegeräte zur haarpflege (z.. B.. Haartrockner, dauerwellengeräte und brennscherenwärmer) oder zum händetrocknen; elektrische bügeleisen; andere elektrowärmegeräte für den haushalt; elektrische heizwiderstände, ausgenommen solche der position 8545:

Instantaneous water heaters

Tubular heating element with mounting flange for washing machines, with:-a nominal output power of 1 700 w at 230 v ac supply voltage, -a weight of 230 g or more but not more than 250 g, -a thickness of the external flange of 2 mm or more, -isolation bushes of steatite or ceramic, and-no flat zones in the design,for use in the manufacture of home appliance products and their components

Elektrische geräte zum raum- oder bodenbeheizen oder zu ähnlichen zwecken:

Andere:

Convection heaters

With built-in fan

Elektrowärmegeräte zur haarpflege oder zum händetrocknen:

Andere elektrowärmegeräte zur haarpflege

Elektrische bügeleisen

Andere öfen; küchenherde, kochplatten, grillgeräte und bratgeräte:

Cooking plates, boiling rings and hobs

Ovens for building in

Andere elektrowärmegeräte:

Brotröster (toaster)

Deep fat fryers

Ironing boards, including sleeve boards, whether or not free standing, with a steam soaking and/or heating top and/or blowing top

Elektrische heizwiderstände:

Assembled only with a simple insulated former and electrical connections, used for anti-icing or de-icing, for use in civil aircraft

Andere

Teile:

Andere:

Inner pot- containing side and central openings,- of annealed aluminium,- with a ceramic coating, heat resistant to more than 200° cfor use in the manufacture of an electric fryer

Fernsprechapparate, einschließlich smartphones und andere telefone für zellulare netzwerke oder für andere drahtlose netzwerke; andere sende- oder empfangsgeräte für töne, bilder oder andere daten, einschließlich apparate für die kommunikation in einem drahtgebundenen oder drahtlosen netzwerk (wie ein lokales netzwerk oder ein weitverkehrsnetzwerk), ausgenommen solche der position 8443 , 8525 , 8527 oder 8528:

Fernsprechapparate für die drahtgebundene fernsprechtechnik mit schnurlosem hörer

Andere telefone für zellulare netzwerke oder andere drahtlose netzwerke

Andere sende- oder empfangsgeräte für töne, bilder oder andere daten, einschließlich apparate für die kommunikation in einem drahtgebundenen oder drahtlosen netzwerk (wie ein lokales netzwerk oder ein weitverkehrsnetzwerk):

Geräte zum empfangen, konvertieren und senden oder regenerieren von tönen, bildern oder anderen daten, einschließlich geräte für die vermittlung (switching) und wegewahl (routing)

Videophones

Reception apparatus for radio-telephony or radio-telegraphy

Teile:

Andere

Mikrofone und haltevorrichtungen dafür:

Andere

Einzellautsprecher im gehäuse

For use in civil aircraft

Andere:

Andere

For use in civil aircraft

Elektrische tonfrequenzverstärker:

Andere

For use in civil aircraft

Teile

Geräte, die durch eingabe von münzen, banknoten, bankkarten, wertmarken oder anderer zahlungsmittel betätigt werden:

Andere:

Andere:

Andere

Andere geräte:

For use in civil aircraft

Andere

Magnetbandgeräte

Teile und zubehör, erkennbar ausschließlich oder hauptsächlich für geräte der positionen 8519 oder 8521 bestimmt:

Andere:

Andere

Magnetische aufzeichnungsträger:

Andere:

Ohne aufzeichnung

Andere

Ohne aufzeichnung:

Discs for laser reading systems of a recording capacity exceeding 900 megabytes but not exceeding 18 gigabytes, other than erasable

Andere:

Digital versatile discs (dvd)

Andere

Nicht flüchtige halbleiterspeichervorrichtungen:

Andere

Andere:

Andere

Ohne aufzeichnung

Flachbildschirmmodule, auch berührungsempfindliche bildschirme enthaltend:

Aus flüssigkristallen

Andere

Aus flüssigkristallen

Andere

Sendegeräte

Fernsehkameras, digitale fotoapparate und videokameraaufnahmegeräte:

Andere, strahlungsfeste oder strahlungsresistente erzeugnisse gemäß der unterpositions-anmerkung 2 zu diesem kapitel

Andere

Funkmessgeräte (radargeräte):

Andere

Funknavigationsgeräte:

Andere

For use in civil aircraft

Rundfunkempfangsgeräte, auch in einem gemeinsamen gehäuse mit einem tonaufnahme- oder tonwiedergabegerät oder einer uhr kombiniert:

Radiokassettengeräte im taschenformat

Andere

Kombiniert mit tonaufnahme- oder tonwiedergabegeräten

Andere:

Andere:

Andere

Andere:

Nicht mit tonaufnahme- oder tonwiedergabegeräten, jedoch mit uhr kombiniert

Monitore und projektoren, ohne eingebautes fernsehempfangsgerät; fernsehempfangsgeräte, auch mit eingebautem rundfunkempfangsgerät oder ton- oder bildaufzeichnungs- oder -wiedergabegerät:

Zum direkten anschluss an und für die verwendung mit einer automatischen datenverarbeitungsmaschine der position 8471

Andere monitore:

Of a kind solely or principally used in an automatic data-processing system of heading 8471

With a screen of the liquid crystal display (lcd) technology

Andere:

Electronic device with lcd touch screen display powered by a voltage of 12 v or more but not more than 14.4 v, containing:-a lcd control processor,-a gps module,-a bluetooth module,-an usb port,-a radio signal tuner,-whether or not containing dab module,-whether or not containing functions for cooperation with e-call,-whether or not containing an integrated control panel,-whether or not containing connectors,for use in the manufacture of goods of chapter 87

Projectors

Andere:

Andere:

Andere

Der beschaffenheit nach nicht für den einbau eines videobildschirms hergerichtet

Television projection equipment

Andere:

With a screen of the liquid crystal display (lcd) technology

Andere

Teile, erkennbar ausschließlich oder hauptsächlich für geräte der positionen 8524 bis 8528 bestimmt:

Aerials

Outside aerials for radio or television broadcast receivers

For use in civil aircraft

Andere

For use in civil aircraft

Andere

Organic light-emitting diode modules and organic light-emitting diode panels for the apparatus of subheadings 8528 72 or 8528 73

Electronic assemblies

For apparatus of headings 8527 and 8528

Elektrische verkehrssignal-, verkehrssicherungs-, verkehrsüberwachungs- und verkehrssteuergeräte für schienenwege oder dergleichen, straßen, binnenwasserstraßen, parkplätze oder parkhäuser, hafenanlagen oder flughäfen (ausgenommen solche der position 8608):

Andere geräte

Elektrische hör- und sichtsignalgeräte (z.. B.. Läutewerke, sirenen, anzeigetafeln, einbruchs- oder diebstahlalarmgeräte und feuermelder), ausgenommen solche der position 8512 oder 8530:

Of a kind used for buildings

For use in civil aircraft

Anzeigetafeln mit flüssigkristallanzeige (lcd) oder leuchtdiodenanzeige (led):

For use in civil aircraft

Incorporating liquid crystal devices (lcd)

For use in civil aircraft

Andere:

Andere

Bells, buzzers, door chimes and similar

Andere

Teile

Fixed capacitors designed for use in 50/60 hz circuits and having a reactive power handling capacity of not less than 0.5 kvar (power capacitors)

Tantalkondensatoren

Einschichtige keramikkondensatoren

Papierkondensatoren und kunststoffkondensatoren

Drehkondensatoren und andere einstellbare kondensatoren

Elektrische widerstände (einschließlich rheostate und potenziometer), ausgenommen heizwiderstände:

Andere festwiderstände:

Andere

Für eine leistung von 20 w oder weniger

Andere stellwiderstände (einschließlich rheostate und potenziometer):

Andere

Gedruckte schaltungen:

Multilayer circuits

With other passive elements

Sicherungen:

Andere

For a voltage of less than 72.5 kv

Andere

For use in certain types of aircraft

Trennschalter sowie ein- und ausschalter:

For use in certain types of aircraft

Andere:

Andere

For use in certain types of aircraft

Andere:

Andere

Sicherungen:

For use in certain types of aircraft

For a current exceeding 10 a but not exceeding 63 a

Andere

For use in certain types of aircraft

Leistungsschalter:

For use in certain types of aircraft

For a current exceeding 63 a

Andere

For a current not exceeding 16 a

For a current exceeding 125 a

Für eine spannung von 60 v oder weniger:

For use in certain types of aircraft

Andere

For use in certain types of aircraft

Power relay with:-electromechanical and/or electromagnetical switching function,-a load current of 3 a or more but not more than 16 a,-a coil voltage of 5 v or more but not more than 24 v, and-a distance between the connector pins of the load circuit not more than 15.6 mm

Andere

For use in certain types of aircraft

Photoelectric (so called photovoltaic) relay consisting of two gaalas light-emitting diodes, two galvanically isolated input circuits with photovoltaic generator(s) and four power mosfet output switches in a casing with connections for a voltage of more than 60 volts

Andere

Electronic ac switches consisting of optically coupled input and output circuits (insulated thyristor ac switches)

Electromechanical snap-action switches for a current not exceeding 11 a

Für eine spannung von 60 v oder weniger:

Rotary switches

Andere

Lampenfassungen:

For use in certain types of aircraft

Andere:

Andere

For coaxial cables

Andere:

Andere:

Ac socket with a noise filter, composed of:- ac socket (for power cord connection) of 230 v,- integrated noise filter composed of capacitors and inductors,- cable connector for connecting an ac socket with the pdp (plasma display panel) power supply unit,whether or not equipped with a metal support, which joins the ac socket to the pdp tv set

Socket or plug, built into a plastic or metal housing, with no more than 96 pins, for use in the manufacture of products falling within headings 8521 or 8528

Andere

Optical socket, plug or connector, for use in the manufacture of goods falling within headings 8521 or 8528

Connectors of plastics for optical fibres, optical fibre bundles or cables, for use in certain types of aircraft

Andere geräte:

Connections and contact elements for wire and cables

Andere

Für eine spannung von 1 000 v oder weniger:

For use in certain types of aircraft

Andere:

For use in certain types of aircraft

A control unit being a printed circuit board with at least:-a microprocessor,-a programmable memory,-a single connector,-a ppe housing,-a supply of voltage of 220 v or more but not more than 240 v,-a length of 200 mm or more but not more than 210 mm,-a width of 70 mm or more but not more than 100 mm, and-a height of 20 mm or more but not more than 30 mm,for use in the manufacture of dishwashers

Electronic suspension control unit with:-a printed circuit board in plastic housing,-lin and can buses,-a programmable memory,-a signal processor,-an operating direct current voltage of 9 v or more but not more than 16 v,-at least one connector,-whether or not with metal mounting bracket,for use in the manufacture of goods of chapter 87

Fuse control module in a plastic housing with mounting brackets comprising:- sockets with or without fuses,- connecting ports,- a printed circuit board with embedded microprocessor, micro switch and relayof a kind used in the manufacture of goods of chapter 87

Electronic control units, manufactured according to class 2 of ipc-a-610e standard, with at least:- an ac power input of 208 v or more but not more than 400 v,- a logic power input of 24 v dc,- an automatic circuit breaker,- a main power switch,- internal or external electrical connectors and cables,- in a housing with dimension of 281 mm x 180 mm x 75 mm or more, but not more than 630 mm x 420 mm x 230 mm,of a kind used for manufacturing recycling or sorting machines

Multifunctional device (so-called “combine instrument”) with:- curved tft-lcd display (radius 750 mm) with contact-sensitive surfaces,- microprocessors and memory chips,- acoustic module and loudspeaker,- connections for can, 3 x lin bus, lvds and ethernet,- for operating various functions (e.g. chassis, lighting) and- for situation-related display of vehicle and navigation data (e.g. speed, odometer, charge level of the drive battery), for use in the manufacture of passenger cars powered solely by an electric motor covered by hs subheading 8703 80

Touch-sensitive data input devices (so-called touch screens) without display capabilities, for incorporation into apparatus having a display, which function by detecting the presence and location of a touch within the display area

For use in certain types of aircraft

Motor bridge ics without programmable memory consisting of:- one or more integrated circuits, not interconnected, on separate lead frames,- also with discrete metal oxide field effect transistors (mosfet) for controlling dc motors in cars- mounted in a plastic housing

Electronic control unit without memory, for a voltage of 12 v, for information exchange systems in vehicles (for connection of audio, telephony, navigation, camera and wireless car service) containing:- 2 rotary knobs- 27 or more pushbuttons- led lights- 2 integrated circuits for receiving and sending of control signals via the lin-bus

Switch for motor vehicle seat regulation with a memory function, with:-three single switches,-a five-pin connector,-for a voltage of 9 vdc or more but not more than 16 vdc, and-electric components inside the panel with integrated led,for use in the manufacture of automotive components

Memory switch control panel for seat and lock switch for vehicles with:-a width of 70.2 mm or more but not more than 70.5 mm, -parallel ribs with a distance between them of 2.6 mm or more but not more than 2.8 mm on the rear side,-a 5 pines connector, and-electric components inside the panel with integrated led,for use in the manufacture of automotive components

A control unit being a printed circuit board with at least:-a microprocessor,-two or more connectors but not more than four,-modified resins,-a length of 180 mm or more but not more than 250 mm,-a width of 130 mm or more but not more than 200 mm, and-a height of 40 mm or more but not more than 60 mm,for use in the manufacture of washing machines

A control unit being a printed circuit board with at least: -a microprocessor, -eight connectors or more but not more than eleven, -a supply voltage of 215 v or more but not more than 245 v, -a housing of pa6-mr30, -with or without a transformer,-with or without a high power relay,-with or without insulated-gate bipolar transistor,-a length of 280 mm or more but not more than 345 mm, -a width of 400 mm or more but not more than 470 mm, -a height of 28 mm or more but not more than 45 mm, for use in the manufacture of induction stoves

Propulsion control system with at least:-a dc/ac inverter,-a power of 190 kw or more but not more than 220 kw,-a high voltage circuits with ac and dc interfaces for connecting a traction motor, generator and energy storage system,-an integral control of all drive motor and generator traction system functions,-a can communications interface with system control unit,-a liquid cooled system,-a length of 300 mm or more but not more than 950 mm,-a width of 350 mm or more but not more than 600 mm,-a height of 200 mm or more but not more than 350 mm,-a weight of 40 kg or more but not more than 90 kg​

Electronic control units for a voltage of 12 v, for use in the manufacture of vehicle mounted temperature control systems

Andere

For a voltage exceeding 1 000 v but not exceeding 72.5 kv

Andere

For use in certain types of aircraft

Teile, erkennbar ausschließlich oder hauptsächlich für geräte der position 8535, 8536 oder 8537 bestimmt:

Andere:

Electronic assemblies

Andere:

For use in certain types of aircraft

Interior antenna for a car door locking system, comprising:- an antenna module in a plastic housing,- whether or not a connection cable with a plug,- whether or not a connector,- at least one mounting bracket,- whether or not pcb including integrated circuits, diodes and transistors, for use in the manufacture of goods of chapter 87

Andere:

Andere:

Front control panel, in the form of a plastic box, with light guides, rotary switches, pressure switches and buttons switches, or other type of switches, without any electrical component, of a kind used in the dashboard of motor vehicles of chapter 87

Andere

Innenverspiegelte scheinwerferlampen (sealed beam lamp units):

Andere

Wolfram-halogen-glühlampen:

Other, for a voltage

Lamps for lighting, for use in certain types of aircraft

Not exceeding 100 v

Andere

Reflector lamps

Andere

Lamps for lighting, for use in certain types of aircraft

Andere:

Other, for a voltage

Lamps for lighting, for use in certain types of aircraft

Not exceeding 100 v

Andere

Glühkathoden-leuchtstofflampen:

Lamps for lighting, for use in certain types of aircraft

Andere:

Andere

Mercury or sodium vapour lamps

Lamps for lighting, for use in certain types of aircraft

Andere:

Andere:

Andere

Bogenlampen

Leuchtdiodenlichtquellen (led-lichtquellen):

Leuchtdiodenlampen (led-lampen)

Lamp bases

Glühkathoden-, kaltkathoden- und fotokathoden-elektronenröhren (z.. B.. Vakuumröhren, dampf- oder gasgefüllte röhren, quecksilberdampfgleichrichterröhren, kathodenstrahlröhren und bildaufnahmeröhren für fernsehkameras):

Für mehrfarbiges bild:

Andere

For use in certain types of aircraft

Bildaufnahmeröhren für fernsehkameras; bildwandler- und bildverstärkerröhren; andere fotokathodenröhren:

For use in certain types of aircraft

Andere:

Andere:

Andere

For use in certain types of aircraft

Andere kathodenstrahlröhren:

Andere

Magnetrone:

Andere

For use in certain types of aircraft

Andere elektronenröhren:

For use in certain types of aircraft

Andere:

Andere:

Andere

Von kathodenstrahlröhren:

Thermionic electron source (emitter point) of lanthanum hexaboride (cas rn 12008-21-8) or cerium hexaboride (cas rn 12008-02-5), with electric connectors- with or without a metal housing,- with or without a graphite carbon shield mounted in a mini-vogel type system,- with or without separate pyrolytic carbon blocks used as heating elements, and - a cathode temperature of less than 1 800 k at a filament current of 1.26 a

Andere:

Andere

Dioden, andere als fotodioden und leuchtdioden (led)

Mit einer verlustleistung von weniger als 1 w

Thyristoren, diacs und triacs, ausgenommen lichtempfindliche halbleiterbauelemente

Leuchtdioden (led)

Fotoelemente, zu modulen zusammengesetzt oder in form von tafeln

Andere halbleiterbauelemente:

Andere

Teile

Elektronische integrierte schaltungen:

Goods specified in note 12(b)(3 and 4) to this chapter

Andere

Speicher:

Multi-component integrated circuits (mcos)

Andere:

With a storage capacity not exceeding 512 mbits

Static random-access memories (s-rams), including cache random-access memories (cache-rams)

Electrically erasable, programmable, read only memories (e2proms), including flash e2proms

With a storage capacity not exceeding 512 mbits

Andere

Verstärker:

Andere

Goods specified in note 12(b)(3 and 4) to this chapter

Andere

Teile

Teilchenbeschleuniger

Maschinen, apparate und geräte für die galvanotechnik, elektrolyse oder elektrophorese:

Andere

Andere maschinen, apparate und geräte:

Microwave amplifiers

Digital flight-data recorders

Digital signal processing apparatus capable of connecting to a wired or wireless network for the mixing of sound

Plasma cleaner machines that remove organic contaminants from electron microscopy specimens and specimen holders

Electrical machines with translation or dictionary functions

Sunbeds, sunlamps and similar suntanning equipment

Andere:

Engine pressure indicators, for use in certain types of aircraft

Electronic control unit of the 360-degree vehicle situation display system with:-an operating dc voltage of 9 v or more but not more than 16 v,-a videoprocessor,-a signal processor,-one or more connectors, and-whether or not with a metal mounting bracket, for use in the manufacture of goods of chapter 87

High-frequency amplifier comprising one or more integrated circuits and one or more discrete capacitor chips, whether or not with ipd (integrated passive devices) on a metal flange in a housing

Opto-electronic circuit comprising one or more light-emitting diodes (leds), whether or not equipped with an integrated driving circuit, and one photodiode with amplifier circuit, whether or not with an integrated logic gate arrays circuit or one or more light-emitting diodes and at least 2 photodiodes with an amplifier circuit, whether or not with an integrated logic gate arrays circuit or other integrated circuits, contained in a housing

An electronic sound generator, creating an analog signal for a device producing the sound of an engine, containing:- a printed circuit board with a microprocessor and a sound amplifier,- a connector,- a plastic housing,- with or without a metal holder,for use in the manufacture of goods of chapter 87

Teile

Wickeldrähte:

Lacquered or enamelled

Andere

Antenna connecting cable for the transmission of radio (am/fm) signal and whether or not gps signal, containing:- a coaxial cable,- two or more connectors, and- 3 or more plastic clips for attachment to the dashboardof a kind used in the manufacture of goods of chapter 87

Zündkabelsätze und andere kabelsätze von der für beförderungsmittel verwendeten art:

Andere:

Four-core connecting cable containing two female connectors for the transmission of digital signals from navigation and audio systems to a usb connector, for use in the manufacture of goods of chapter 87

Wiring harness to connect the integrated battery system with the car's control systems, containing:-an input waterproof connector,-four or more output connectors,-two or more plastic clips for attachmentfor use in the production of rechargeable batteries for hybrid and electric vehicles

Andere

Mit anschlussstücken versehen:

Andere:

Pet or pvc insulated flexible cable with or without connector with:-voltage of not more than 250 v,-a current of not more than 1 a,-a heat resistance of not more than 105 °c,-individual wires of a thickness of not more than 0.1 mm (± 0.01 mm) and a width of not more than 0.8 mm (± 0.03 mm),-a distance between conductors of not more than 0.5 mm and-a pitch (distance from centreline to centreline of conductors) of not more than 1.25 mm

Specially designed connector for solar power system: -as 1-part system with 1 plastic housing with 1 or more but not more than 4 diodes and 2 insulated copper cables with connectors or -as 3-part system with one plastic housing with 1 or more but not more than 4 diodes and 2 plastic housings with insulated copper cables with connectors, -with a current for the diodes of 3 a or more but not more of 50 a, -with a cable length of not more than 1 500 mm, -with a maximum rated voltage of 1 500 v

Electric conductors:- of a voltage of not more than 80 v,- with a length of not more than 120 cm,- fitted with connectors,for use in the manufacture of hearing aids, accessory kits and speech processors

Andere:

Andere:

Andere:

Elastomeric connector, of rubber or silicone, consisting of one or more conductor elements

Electric conductors:- of a voltage of not more than 80 v,- of a platinum-iridium-alloy,- coated with poly(tetrafluoroethylene),- without connectors,for use in the manufacture of hearing aids, implants and speech processors

For a voltage exceeding 80 v but less than 1 000 v

Andere

Andere elektrische leiter, für eine spannung von mehr als 1 000 v:

Specially designed connector for solar power system: -as 1-part system with 1 plastic housing with 1 or more but not more than 4 diodes and 2 insulated copper cables with connectors or -as 3-part system with one plastic housing with 1 or more but not more than 4 diodes and 2 plastic housings with insulated copper cables with connectors, -with a current for the diodes of 3 a or more but not more of 50 a, -with a cable length of not more than 1 500 mm, -with a maximum rated voltage of 1 500 v

With other conductors

Single mode optical fibre cables, made up of one or more individually sheathed fibres, with protective casing, whether or not containing electric conductors; excluding cables in which all the optical fibres are individually fitted with operational connectors at one or both extremities and plastic insulated cables for submarine use containing a copper or aluminium conductor in which fibres are contained in metal module(s)

Cables equal to or above 500 metres in length in which all the optical fibres are individually fitted with operational connectors at one or both extremities, excluding plastic insulated cables for submarine use containing a copper or aluminium conductor in which fibres are contained in metal module(s)

Kohleelektroden, kohlebürsten, lampenkohlen, batterie- und elementekohlen und andere waren für elektrotechnische zwecke, aus grafit oder anderem kohlenstoff, auch in verbindung mit metall:

Von der für öfen verwendeten art:

Graphite electrodes of a kind used for electric furnaces, with an apparent density of 1.5 g/cm3 or more but less than 1.65 g/cm3 and an electrical resistance of 6.0 mo.m or less, or with an apparent density of 1.5 g/cm3 or more and an electrical resistance of more than 6.0 mo.m but not more than 7.0 mo.m

Andere

Andere:

Andere:

Nipples used for graphite electrodes of a kind used for electric furnaces, with an apparent density of 1.5 g/cm³ or more but less than 1.65 g/cm³ and an electrical resistance of 7.0 μω.m or less but more than 6.0 μω.m

Elektrische isolatoren aus stoffen aller art:

Aus keramischen stoffen

Aus kunststoffen

Isolierteile, ganz aus isolierstoffen oder nur mit in die masse eingepressten einfachen metallteilen zum befestigen (z.. B.. Mit eingepressten hülsen mit innengewinde), für elektrische maschinen, apparate, geräte oder installationen, ausgenommen isolatoren der position 8546; isolierrohre und verbindungsstücke dazu, aus unedlen metallen, mit innenisolierung:

Isolierteile aus kunststoffen

Elektrische teile von maschinen, apparaten und geräten, in diesem kapitel anderweit weder genannt noch inbegriffen:

Light-emitting diode (led) backlight modules, which are lighting sources that consist of one or more leds, and one or more connectors and are mounted on a printed circuit or other similar substrate, and other passive components, whether or not combined with optical components or protective diodes, and used as backlight illumination for liquid crystal displays (lcds)

For use in certain types of aircraft

Unit, consisting of a resonator operating within a frequency range of 1.8 mhz or more but not more than 40 mhz and a capacitor, contained in a housing

Optical unit, containing at least- a laser diode and a photodiode operating at a typical wavelength of 635 nm or more but not more than 815 nm- an optical lens- a "recording photodetector integrated circuit" (pdic)- a focussing and tracking actuator

Abfälle oder schrott von elektrischen und elektronischen geräten:

Abfälle und schrott von blei-akkumulatoren; ausgebrauchte blei-akkumulatoren:

Waste and scrap of lead-acid accumulators

Spent primary cells, spent primary batteries

Andere

Spent primary cells, spent primary batteries

Andere

Spent primary cells, spent primary batteries

Andere

Spent primary cells, spent primary batteries

Andere

Elektrische primärelemente, primärbatterien und akkumulatoren, quecksilberschalter, glas aus kathodenstrahlröhren oder sonstiges beschichtetes glas oder elektrische oder elektronische bauteile enthaltend, cadmium, quecksilber, blei oder polychlorierte biphenyle (pcb) enthaltend

Andere elektrische und elektronische baugruppen und leiterplatten:

Andere

Elektrische primärelemente, primärbatterien und akkumulatoren, quecksilberschalter, glas aus kathodenstrahlröhren oder sonstiges beschichtetes glas oder elektrische oder elektronische bauteile enthaltend, cadmium, quecksilber, blei oder polychlorierte biphenyle (pcb) enthaltend