HS-Codes - 87: VEHICLES OTHER THAN RAILWAY OR TRAMWAY ROLLING STOCK, AND PARTS AND ACCESSORIES THEREOF

Einachsschlepper

Ausschließlich mit kolbenverbrennungsmotor mit selbstzündung (diesel- oder halbdieselmotor):

Used

New

Mit kolbenverbrennungsmotor mit fremdzündung und mit elektromotor angetrieben:

Used

New

Andere

Andere, mit einer motorleistung von:

Agricultural tractors and forestry tractors, wheeled

Mehr als 18 kw bis 37 kw:

Andere

Agricultural tractors and forestry tractors, wheeled

Mehr als 75 kw bis 130 kw:

Andere

Agricultural tractors and forestry tractors, wheeled

Kraftfahrzeuge zum befördern von 10 oder mehr personen, einschließlich fahrer:

Mit einem hubraum von mehr als 2 500 cm3:

Used

New

Mit kolbenverbrennungsmotor mit selbstzündung (diesel- oder halbdieselmotor) und mit elektromotor angetrieben:

Of a cylinder capacity not exceeding 2 500 cm3

Of a cylinder capacity exceeding 2 800 cm3

Ausschließlich mit elektromotor angetrieben

With spark-ignition internal combustion piston engine

New

Of a cylinder capacity not exceeding 2 800 cm3

Used

Personenkraftwagen und andere kraftfahrzeuge, ihrer beschaffenheit nach hauptsächlich zur personenbeförderung bestimmt (ausgenommen solche der position 8702), einschließlich kombinationskraftwagen und rennwagen:

Vehicles specially designed for travelling on snow, with compression-ignition internal combustion piston engine (diesel or semi-diesel), or with spark-ignition internal combustion piston engine

Andere fahrzeuge ausschließlich mit kolbenverbrennungsmotor mit fremdzündung:

New

Mit einem hubraum von mehr als 1 000 cm3 bis 1 500 cm3:

Used

New

Andere

Mit einem hubraum von mehr als 3 000 cm3:

Used

Mit einem hubraum von 1 500 cm3 oder weniger:

Used

New

Andere

Mit einem hubraum von mehr als 2 500 cm3:

Motor caravans

Used

New

Andere

Mit einem hubraum von 1 000 cm3 oder weniger

Andere fahrzeuge mit kolbenverbrennungsmotor mit selbstzündung (diesel- oder halbdieselmotor) und mit elektromotor angetrieben, ausgenommen solche, die durch anstecken an externe elektrische energiequellen aufgeladen werden

New

Andere

Mit einem hubraum von 1 000 cm3 oder weniger

Andere fahrzeuge mit kolbenverbrennungsmotor mit selbstzündung (diesel- oder halbdieselmotor) und mit elektromotor angetrieben, die durch anstecken an externe elektrische energiequellen aufgeladen werden

New

Andere

Andere

Muldenkipper (dumper), ihrer beschaffenheit nach zur verwendung außerhalb des straßennetzes bestimmt:

Andere

Mit einem zulässigen gesamtgewicht von 5 t oder weniger:

Andere:

New

With engines of a cylinder capacity not exceeding 2 500 cm3

Used

Specially designed for the transport of highly radioactive materials

New

Mit einem zulässigen gesamtgewicht von mehr als 20 t:

Andere:

Used

Mit einem zulässigen gesamtgewicht von 5 t oder weniger:

Andere:

New

With engines of a cylinder capacity not exceeding 2 800 cm3

Used

Specially designed for the transport of highly radioactive materials

New

Other, with both compression-ignition internal combustion piston engine(diesel or semi-diesel) and electric motor as motors for propulsion

Specially designed for the transport of highly radioactive materials

With engines of a cylinder capacity exceeding 2 500 m³

Used

New

Mit einem zulässigen gesamtgewicht von mehr als 5 t bis 20 t:

Andere:

Used

Specially designed for the transport of highly radioactive materials

New

Andere, mit kolbenverbrennungsmotor mit fremdzündung und mit elektromotor angetrieben:

Specially designed for the transport of highly radioactive materials

With engines of a cylinder capacity exceeding 2 800 cm³

Used

New

Mit einem zulässigen gesamtgewicht von mehr als 5 t:

Andere:

Used

Andere

Kranwagen (autokrane)

Feuerwehrwagen

Andere:

Andere

Fahrgestelle für zugmaschinen der position 8701; fahrgestelle für kraftwagen der position 8702, 8703 oder 8704, mit kolbenverbrennungsmotor mit selbstzündung (diesel- oder halbdieselmotor), mit einem hubraum von mehr als 2 500 cm3 oder mit kolbenverbrennungsmotor mit fremdzündung und einem hubraum von mehr als 2 800 cm3:

Andere

Für kraftfahrzeuge der position 8703

Karosserien (einschließlich fahrerhäuser), für kraftfahrzeuge der positionen 8701 bis 8705:

For industrial assembly purposes

Andere:

Andere

Stoßstangen und teile davon:

Plastic cover for filling the space between the fog lights and the bumper whether or not with a chrome strip for use in the manufacture of goods of chapter 87

Andere:

Andere

Sicherheitsgurte:

Andere

For the industrial assembly of:pedestrian-controlled tractors of subheading 8701 10;vehicles of heading 8703;vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm3 or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm3;vehicles of heading 8705

Andere:

Andere

For the industrial assembly of:pedestrian-controlled tractors of subheading 8701 10;vehicles of heading 8703;vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm3 or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm3;vehicles of heading 8705

Ductile cast iron brake caliper jaw, of a kind used in the manufacture of goods of chapter 87

Andere:

Body of disc type brake in bir ("ball in ramp") or epb ("electronic parking brake") or with hydraulic function only, containing functional and mounting openings and guide grooves, of a kind used in the manufacture of goods of chapter 87

Andere

Schaltgetriebe und teile davon:

Automatic hydrodynamic gearbox- with a hydraulic torque converter,- without transfer box and cardan shaft,- whether or not with front differential,for use in the manufacture of motor vehicles of chapter 87

Transmission gearbox without torque converter, with:-dual clutch,-7 or more forward gears,-1 reverse gear,-a maximum torque of 390 nm,-whether or not with electric motor integrated,-a height of 400 mm or more but not more than 600 mm,-a width of 350 mm or more but not more than 600 mm, and-a weight of 70kg or more but not more than 110 kg,for use in the manufacture of motor vehicles of heading 8703

Andere:

Automatic hydrodynamic gearbox- with a hydraulic torque converter,- without transfer box and cardan shaft,- whether or not with front differential,for use in the manufacture of motor vehicles of chapter 87

Automatic transmission equipped with double clutch system with:-at least 8 gears,-an engine torque of 800 nm or more,-an electronic differential,-a p-lock safety system, and-a tcu transmission control unit,for use in the manufacture of motor vehicles of heading 8703

Teile:

Andere

For the industrial assembly of:vehicles of heading 8703;vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm3 or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm3;vehicles of heading 8705

Propeller shaft for torque transmission from the gearbox to the rear axle, consisting of:-two cardan rods,-central universal joint,-central bearing with suspension in a plastic cover,-universal joints on both ends of the shaft,-slip, tube and end yokes,-of a length of 1.4 m or more but not more than 2.4 m,for use in the production of goods of chapter 87

Ball-type outboard constant velocity joint housing for transmitting a torque from the engine and transmission to the wheels of motor vehicles, in a form of an outer race, with:-6 ball tracks or more but not more than 8, with-a thread,-an external involute spline with 21 or more but not more than 38 teeth,-for running with bearing balls made of steel with a carbon content of 0.48% or more but not more than 0.57%,-forged, turned, milled and hardened

Outboard constant velocity joint inner race, part of the vehicle's drive system, with:-6 or more but not more than 8 ball tracks, suitable for bearing balls with a diameter of 12.0 mm or more but not more than 24.0 mm,-forged, turned, milled, broached and hardened

Inboard constant velocity joint tripod spider, part of the vehicle's drive system, with:-3 trunnions with a diameter of 17.128 mm or more but not more than 25.468 mm,-forged, turned, broached and hardened

Outboard joint assembly for transmitting a torque from engine and transmission to wheels of motor vehicles, consisting of:-an inner race with 6 ball tracks for running with the bearing balls with a diameter 15.0 mm or more but not more than 20.0 mm,-an outer race with 6 ball tracks for running with 6 bearing balls, made of steel with carbon content of 0.45% or more but not more than 0.58%, with thread and with a spline with 26 teeth or more but not more than 38,-a spherical cage keeping bearing balls in the ball tracks of outer race and inner race in proper angular position, made of material suitable for carburising with carbon content of 0.14% or more but not more than 0.25%, and-with a grease compartment,capable of working at constant speed at variable articulation angle not higher than 50 degrees

Andere:

Teile:

Double flange bearing of 3rd generation, for motor vehicles,- with double-row ball bearing,- whether or not with impulse (encoder) ring,- whether or not with antilock brake system (abs) sensor,- whether or not with mounted screws,for use in the manufacture of goods of chapter 87

Andere

For non-driving axles

Andere

Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middle- of a length of 1 m or more but not more than 2 m,- of a weight of 6 kg or more but not more than 9 kg

Outboard joint assembly for transmitting a torque from engine and transmission to wheels of motor vehicles, consisting of:-an inner race with 6 ball tracks for running with the bearing balls with a diameter 15.0 mm or more but not more than 20.0 mm,-an outer race with 6 ball tracks for running with 6 bearing balls, made of steel with carbon content of 0.45% or more but not more than 0.58%, with thread and with a spline with 26 teeth or more but not more than 38,-a spherical cage keeping bearing balls in the ball tracks of outer race and inner race in proper angular position, made of material suitable for carburising with carbon content of 0.14% or more but not more than 0.25%, and-with a grease compartment,capable of working at constant speed at variable articulation angle not higher than 50 degrees

Ball-type outboard constant velocity joint housing for transmitting a torque from the engine and transmission to the wheels of motor vehicles, in a form of an outer race, with:-6 ball tracks or more but not more than 8, with-a thread,-an external involute spline with 21 or more but not more than 38 teeth,-for running with bearing balls made of steel with a carbon content of 0.48% or more but not more than 0.57%,-forged, turned, milled and hardened

Outboard constant velocity joint inner race, part of the vehicle's drive system, with:-6 or more but not more than 8 ball tracks, suitable for bearing balls with a diameter of 12.0 mm or more but not more than 24.0 mm,-forged, turned, milled, broached and hardened

Andere

For the industrial assembly of:pedestrian-controlled tractors of subheading 8701 10;vehicles of heading 8703;vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm3 or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm3;vehicles of heading 8705

Fitted with pneumatic tyres, new or retreaded, of rubber, of a kind used for buses or lorries, with a load index exceeding 121

Andere:

Fitted with pneumatic tyres, new or retreaded, of rubber, of a kind used for buses or lorries, with a load index exceeding 121

Andere:

Andere

Wheels of aluminium; parts and accessories of wheels, of aluminium

Fitted with pneumatic tyres, new or retreaded, of rubber, of a kind used for buses or lorries, with a load index exceeding 121

Andere:

Andere

Fitted with pneumatic tyres, new or retreaded, of rubber, of a kind used for buses or lorries, with a load index exceeding 121

Andere:

Road wheels of steel, whether or not with their accessories

Andere:

Andere

For the industrial assembly of:vehicles of heading 8703;vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm3 or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm3;vehicles of heading 8705

Andere

Suspension shock-absorbers

Andere

Andere:

Andere:

Andere

Radiators and parts thereof

Aluminium cooler using compressed air with a ribbed design of a kind used in the manufacture of goods of chapter 87

Andere

Radiators

Turbocharger cooling duct containing:-an aluminum alloy duct with at least one metal holder and at least two mounting holes,-a rubber pipe with clips,-a stainless steel flange highly resistant to corrosion [sus430jil],for use in the manufacture of compression ignition engines of motor vehicles

Andere

Of closed-die forged steel

Aluminium alloy inlet or outlet air tank of heat exchangers for car cooling systems, manufactured to standard en ac 42100 or en ac 43000 t6 with - an insulating area flatness of not more than 0.1 mm, - a permissible particle quantity of 0.3 mg per tank, - a distance between pores of 2 mm or more, - pore sizes of not more than 0.4 mm, and - not more than 3 pores larger than 0.2mm -with a weight of 0.2kg or more but not more than 3kg

Auspufftöpfe (schalldämpfer) und auspuffrohre; teile davon:

Andere:

Teile:

Andere

For the industrial assembly of:pedestrian-controlled tractors of subheading 8701 10;vehicles of heading 8703;vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm3 or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm3;vehicles of heading 8705

Lenkräder, lenksäulen und lenkgetriebe; teile davon:

Andere:

Teile:

Andere

For the industrial assembly of:pedestrian-controlled tractors of subheading 8701 10;vehicles of heading 8703;vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm3 or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm3;vehicles of heading 8705

Inflatable sewn safety cushion of high strength polyamide fibre: -folded into three-dimensional packing form, fixed by thermal forming, dedicated fixation seams, fabric cover or plastic staples, or -flat safety cushion with or without thermal folding

Andere:

Andere:

Inflatable sewn safety cushion of high strength polyamide fibre: -folded into three-dimensional packing form, fixed by thermal forming, dedicated fixation seams, fabric cover or plastic staples, or -flat safety cushion with or without thermal folding

Andere

For the industrial assembly of:pedestrian-controlled tractors of subheading 8701 10;vehicles of heading 8703;vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm3 or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm3;vehicles of heading 8705

Aluminium engine bracket, with dimensions of:-height of more than 10 mm but not more than 200 mm,-width of more than 10 mm but not more than 250 mm,-length of more than 10 mm but not more than 200 mm,equipped with at least two fixing holes, made of aluminium alloys enac-46100 or enac-42100 (based on the norm en:1706) with following characteristics:-internal porosity not more than 1 mm,-outer porosity not more than 2 mm,-rockwell hardness hrb 10 or more,of a kind used in the production of suspensions systems for engines in motor vehicles

Andere:

Andere:

A set of type 4 h2 cylinders, in accordance with the ec 79 standard, consisting of two to eight cylinders on aluminum frames:-cylinders made of high density polyethylene (hdpe) composite reinforced with a braid of glass and carbon fibers in epoxy resin,-with an operating pressure of not less than 35 mpa,-with a durability declared by the manufacturer of not less than 20 years,-with a cylinder capacity of 180 liters or more but not more than 375 liters,-equipped with a set of solenoid, manual and safety prd valves,-with a total width of 1 800 mm or more but not more than 2 300 mm,-with a total height of 400 mm or more but not more than 500 mm,-with a total length of 1 200 mm or more but not more than 3 600 mm

Aluminium engine bracket, with dimensions of:-height of more than 10 mm but not more than 200 mm,-width of more than 10 mm but not more than 250 mm,-length of more than 10 mm but not more than 200 mm,equipped with at least two fixing holes, made of aluminium alloys enac-46100 or enac-42100 (based on the norm en:1706) with following characteristics:-internal porosity not more than 1 mm,-outer porosity not more than 2 mm,-rockwell hardness hrb 10 or more,of a kind used in the production of suspensions systems for engines in motor vehicles

Andere

Kraftkarren:

Specially designed for the transport of highly radioactive materials

Andere:

Andere

Panzerkampfwagen und andere selbstfahrende gepanzerte kampffahrzeuge, auch mit waffen; teile davon

Mit kolbenverbrennungsmotor mit einem hubraum von 50 cm3 oder weniger

Scooters

Exceeding 50 cm3 but not exceeding 125 cm3

Mit kolbenverbrennungsmotor mit einem hubraum von mehr als 250 cm3 bis 500 cm3:

Of a cylinder capacity exceeding 380 cm3 but not exceeding 500 cm3

Mit kolbenverbrennungsmotor mit einem hubraum von mehr als 800 cm3

Bicycles, tricycles and quadricycles, with pedal assistance, with an auxiliary electric motor with a continuous rated power not exceeding 250 watts

Cycles, with pedal assistance, with an auxiliary electric motor

Andere

Bicycles with ball bearings

Consigned from Cambodia, Pakistan or the Philippines

Andere:

Andere:

Consigned from Cambodia, Pakistan or the Philippines

Rollstühle und andere fahrzeuge für behinderte, auch mit motor oder anderer vorrichtung zur mechanischen fortbewegung:

Andere

Für krafträder (einschließlich mopeds):

Schaltgetriebe und teile davon

Auspufftöpfe (schalldämpfer) und auspuffrohre; teile davon

Andere:

Motor bikes radiators in consignment of 100 pieces or more

Für rollstühle und andere fahrzeuge für behinderte

Rahmen und gabeln sowie teile davon:

Painted, anodised, polished and/or lacquered

Constructed from carbon fibres and artificial resin, for use in the manufacture of bicycles (including e-bikes)

Andere

Constructed from carbon fibres and artificial resin, for use in the manufacture of bicycles (including e-bikes)

Andere

Constructed from carbon fibres and artificial resin, for use in the manufacture of bicycles (including e-bikes)

Andere

Painted, anodised, polished and/or lacquered

Front forks, except rigid (non-telescopic) front forks made entirely of steel, for use in the manufacture of bicycles (including electric bicycles)

Andere:

Andere

Front forks, except rigid (non-telescopic) front forks made entirely of steel, for use in the manufacture of bicycles (including electric bicycles)

Teile

Rims

Naben (andere als bremsnaben) und freilaufzahnkränze:

Originating in or consigned from China:- in quantities below 300 units per month on average for a period not exceeding 12 months, or to be transferred to a party in quantities below 300 units per month on average for a period not exceeding 12 months; or- to be transferred to another holder of an end-use authorisation or to exempted parties

Andere

Brakes

Other brakes

Andere

Brake levers

Andere

Sättel

Pedals

Andere

Originating in or consigned from China:- in quantities below 300 units per month on average for a period not exceeding 12 months, or to be transferred to a party in quantities below 300 units per month on average for a period not exceeding 12 months; or- to be transferred to another holder of an end-use authorisation or to exempted parties

Teile

Handlebars

Bicycle handlebars,- with or without integrated stem,- either made out of carbon fibres and synthetic resin or made of aluminium,for use in the manufacture of bicycles (including electric bicycles)

Andere:

Andere

Derailleur gears

Derailleur gears, consisting of:-rear derailleur and mounting articles,-with or without front derailleur,for use in the manufacture of bicycles (including electric bicycles)

Andere:

Andere

Complete wheels with or without tubes, tyres and sprockets

Andere

Stem for bicycle handlebars, for use in the manufacture of bicycles (including electric bicycles)

Andere

Baby carriages

Anhänger, einschließlich sattelanhänger, für fahrzeuge aller art; andere nicht selbstfahrende fahrzeuge; teile davon:

Of a weight not exceeding 1 600 kg

Anhänger und sattelanhänger für landwirtschaftliche zwecke, mit selbstlade- oder -entladevorrichtung

Anhänger und sattelanhänger mit tankaufbau

Specially designed for the transport of highly radioactive materials

New

Andere

Andere anhänger und sattelanhänger

Teile:

Bodies

Andere teile

Fitted with pneumatic tyres, new or retreaded, of rubber, of a kind used for buses or lorries, with a load index exceeding 121

Andere:

Road wheels of steel, whether or not with their accessories

Andere:

Andere