HS-koodid - 84: NUCLEAR REACTORS, BOILERS, MACHINERY AND MECHANICAL APPLIANCES; PARTS THEREOF

Tuumareaktorid

Tuumareaktorite kütteelemendid (kassetid), kiiritamata:

Muud

Stainless steel absorber control rods, filled with neutron absorbing chemical elements

Vee või muu vedeliku auru tootvad katlad (v.. A keskkütte kuumaveekatlad, mis võivad toota ka madalrõhuauru); ülekuumendatud vee katlad:

Veetorukatlad jõudlusega üle 45 t tunnis

Muud, k.. A kombineeritud ehitusega katlad:

Muud

Osad:

Muud

Katlad:

Muud

Malmist

Rubriikide 8402 ja 8403 katelde abiseadmed (näiteks eelsoojendid (ökonomaiserid), ülekuumendid, tahmaeemaldid, gaasi rekuperaatorid); aurujõuseadmete kondensaatorid:

Aurujõuseadmete kondensaatorid

Generaatorgaasi või vesigaasi generaatorid, puhastitega või puhastiteta; atsetüleenigeneraatorid ning samalaadsed vesimenetlusega gaasigeneraatorid, puhastitega või puhastiteta

Osad

Ujuvvahendite jõuseadmeteks

Võimsusega üle 40 mw

Industrial steam turbine with:-an output of 2 mw or more but not more than 40 mw,-designed for a pressure of not more than 140 bar and a temperature of not more than 540 ° c,-equipped with single – or double seat valves on the live steam side which are operated with a hydraulic servo of not more than 30 bar

Osad:

Muud

Õhusõidukite mootorid:

Intended to be fitted in aircraft imported duty free or built within the community

Ujuvvahendite käiturid:

Of a cylinder capacity not exceeding 325 cm³

Of a power not exceeding 30 kw

Muud

Silindrite töömahuga kuni 50 cm³

Of a cylinder capacity exceeding 50 cm3 but not exceeding 125 cm3

Silindrite töömahuga üle 250 cm3, kuid mitte üle 1 000 cm3:

Spark-ignition reciprocating or rotary internal combustion piston engines, having a cylinder capacity of not less than 300 cm³ and a power of not less than 6 kw or more but not more than 20.0 kw, for the manufacture of:-lawn mowers of subheadings 8433 11, 8433 19 and 8433 20,-tractors of subheadings 8701 91 90, 8701 92 90 whose main function is that of a lawn mower,-four stroke mowers with motor of a cylinder capacity of not less than 300 cm³ of subheading 8433 20 10 or-snowploughs and snow blowers of subheading 8430 20

Of a cylinder capacity exceeding 500 cm3 but not exceeding 1000 cm3

New, single-cylinder, four stroke, spark-ignition internal combustion engine with:-a cylinder capacity exceeding 500cm³ but not exceeding 1000 cm³,-overall dimensions of not more than: 490 mm (length) x 390 mm (width) x 590 mm (height),-a power of 22 kw or more but not more than 35 kw,-equipped with output shaft having an end diameter of 30 mm and a taper of 6 degrees (+/- 1 degree),-whether or not equipped with starter, throttle body, spark plug wire, fuel rail and injector,for use in the manufacture of all-terrain or utility task vehicles

Muud

For the industrial assembly of: pedestrian-controlled tractors of subheading 8701 10; motor vehicles of heading 8703; motor vehicles of heading 8704 with an engine of a cylinder capacity of less than 2 800 cm3; motor vehicles of heading 8705

Muud

Used

Not exceeding 1 500 cm3

Muud

New dual cylinder, air cooled, four stroke 49 degree v-twin internal combustion spark-ignition engine with:-a cylinder capacity exceeding 1800 cm³,-overall dimensions of not more than: 800 mm (length) x 500 mm (width) x 600 mm (height),-a power of 60 kw or more but not more than 75kw,-equipped with a dry sump system with an intermediate wet receptacle,-whether or not equipped with a starter, outfitted with a throttle body, two or more fuel injectors, a stator,for use in the manufacture of motorcycle bikes

Muud mootorid:

Four-stroke petrol engines of a cylinder capacity of not more than 250 cm³ for use in the manufacture of garden equipment of heading 8432, 8433, 8436 or 8508

Muud

For the industrial assembly of: pedestrian-controlled tractors of subheading 8701 10; motor vehicles of heading 8703; motor vehicles of heading 8704 with an engine of a cylinder capacity of less than 2 800 cm3; motor vehicles of heading 8705

Of a power not exceeding 10 kw

Muud

Spark-ignition reciprocating or rotary internal combustion piston engines, having a cylinder capacity of not less than 300 cm³ and a power of not less than 6 kw or more but not more than 20.0 kw, for the manufacture of:-lawn mowers of subheadings 8433 11, 8433 19 and 8433 20,-tractors of subheadings 8701 91 90, 8701 92 90 whose main function is that of a lawn mower,-four stroke mowers with motor of a cylinder capacity of not less than 300 cm³ of subheading 8433 20 10 or-snowploughs and snow blowers of subheading 8430 20

Muud

Ujuvvahendite käiturid:

For seagoing vessels of headings 8901 to 8906, tugs of subheading 8904 00 10 and warships of subheading 8906 10 00

New, of a power

For seagoing vessels of headings 8901 to 8906, tugs of subheading 8904 00 10 and warships of subheading 8906 10 00

Exceeding 50 kw but not exceeding 100 kw

Muud

For seagoing vessels of headings 8901 to 8906, tugs of subheading 8904 00 10 and warships of subheading 8906 10 00

Exceeding 200 kw but not exceeding 300 kw

Muud

For seagoing vessels of headings 8901 to 8906, tugs of subheading 8904 00 10 and warships of subheading 8906 10 00

Exceeding 500 kw but not exceeding 1 000 kw

Muud

For seagoing vessels of headings 8901 to 8906, tugs of subheading 8904 00 10 and warships of subheading 8906 10 00

Exceeding 5 000 kw

Muud

For the industrial assembly of: pedestrian-controlled tractors of subheading 8701 10; motor vehicles of heading 8703; motor vehicles of heading 8704 with an engine of a cylinder capacity of less than 2 500 cm3; motor vehicles of heading 8705

For wheeled agricultural or forestry tractors, of a power

Exceeding 50 kw but not exceeding 100 kw

For other vehicles of chapter 87, of a power

Exceeding 50 kw but not exceeding 100 kw

Exceeding 200 kw

For rail traction

Used

Muud

Not exceeding 15 kw

Muud

For use in civil aircraft

Exceeding 30 kw but not exceeding 50 kw

Muud

For use in civil aircraft

Exceeding 100 kw but not exceeding 200 kw

Muud

For use in civil aircraft

Muud

For use in civil aircraft

Muud

For use in civil aircraft

Muud

For use in civil aircraft

Exceeding 5 000 kw

Muud

Õhusõidukite mootoritele:

Intended to be fitted in aircraft imported duty free or built within the community

Muud:

Carburetor with:-2 mounting holes with a diameter of 31 mm,-a choke bore diameter of 18 mm or more, but not more than 19.05 mmfor use in the manufacture of a two-stroke engine grass trimmer

Fuel distribution pipe complete consisting of rail pipe, high pressure sensor and injectors for direct gasoline fuel injection with:-an operating pressure of not more than 22.5 mpa,-solenoid direct injector,-analog pressure sensor for not more than 22.5 mpa

Fuel injector with solenoid valve for optimised atomisation in the combustion chamber for use in the manufacture of spark-ignition internal combustion piston engines of motor vehicles

Exhaust manifold with turbine housing of turbochargers, with a hole to insert a turbine wheel, whereby the hole has a diameter of 28mm or more, but not more than 181mm

Housing of fuel injection valve for generating an electromagnetic field to actuate the injection valve with:-an inlet diameter of 2 mm or more, but not more than 10 mm,-an outlet diameter of 2 mm or more, but not more than 10 mm,-an electric coil with a resistance of 10 ω or more, but not more than 15 ω, which ends in an electrical connection,-a plastic covering moulded around a stainless steel tube

Muud

Injectors with solenoid valve for optimised atomisation in the engine combustion chamber

Exhaust manifold with turbine housing of turbochargers, with a hole to insert a turbine wheel, whereby the hole has a diameter of 28mm or more, but not more than 181mm

High pressure fuel rail of galvanised ferrite-pearlite steel with:-at least one pressure sensor and one valve,-a length of 314 mm or more but not more than 322 mm,-an operating pressure not more than 225 mpa,-an inlet temperature not more than 95°c,-ambient temperature of -45°c or more but not more than 145°c,for use in the manufacture of compression ignition engines of motor vehicles

Hüdroturbiinid, vesirattad ja nende regulaatorid:

Võimsusega kuni 1 000 kw

Võimsusega üle 10 000 kw

Turboreaktiivmootorid, turbopropellermootorid ning muud gaasiturbiinid:

Veojõuga kuni 25 kn:

Intended to be fitted in aircraft imported duty free or built within the community

Veojõuga üle 25 kn:

For use in civil aircraft

Muud

For use in civil aircraft

Muud

For use in civil aircraft

Muud

Võimsusega kuni 1 100 kw:

Intended to be fitted in aircraft imported duty free or built within the community

Võimsusega üle 1 100 kw:

For use in civil aircraft

Muud

For use in civil aircraft

Muud

Võimsusega kuni 5 000 kw:

Muud

Of a power exceeding 5 000 kw but not exceeding 20 000 kw

Muud

For use in civil aircraft

Of a power exceeding 50 000 kw

Muud

Turboreaktiivmootoritele ja turbopropellermootoritele:

Intended to be fitted in aircraft imported duty free or built within the community

Muud:

Muud:

Turbine housing of turbochargers, with a hole to insert a turbine wheel, whereby the hole has a diameter of 28mm or more, but not more than 181mm

Muud:

For use in civil aircraft

Muud

Lineaarsed (silindrid):

For use in civil aircraft

Muud:

Muud

Hydraulic systems

Muud

Hydraulic fluid power motors

Muud

For use in civil aircraft

Pneumaatilised masinad ja jõuseadmed:

For use in civil aircraft

Muud:

Actuator for a single-stage turbocharger, with: - ¬a pressure inlet pipe and a control rod with a working stroke of 15mm or more but not more than 40mm, - a maximum length of the actuator including control rod of not more than 400mm, - ¬a maximum diameter of the can at the widest point of not more than 140mm, and - a maximum height of the can without control rod of not more than 140mm

Muud:

Muud:

Muud

Of reaction engines other than turbojets

Intended to be fitted in aircraft imported duty free or built within the community

Of hydraulic power engines and motors

Muud

For use in civil aircraft

Gearbox support used as a support and load-carrying component between the gearbox and the bedplate of a wind turbine, made of solution strengthened ductile iron castings (ssdi), with:-a diameter of 2 m or more, but not more than 5 m,-a weight of 2 tons or more but not more than 7 tons

Vedelikupumbad, vedelikukulu mõõtvate seadmetega või ilma nendeta; vedelikutõstukid (-elevaatorid):

Kütuse- ja määrdeõlipumbad tanklate ja garaažide jaoks

For use in civil aircraft

Käsipumbad, v.. A alamrubriikidesse 8413 11 ja 8413 19 kuuluvad:

Muud

Injection pumps

Single-cylinder radial-piston high pressure pump for gasoline direct injection with:- an operating pressure of 200 bar or more, but not more than 350 bar,- a flow control, and- a pressure relief valve,for use in the manufacture of engines of motor vehicles

High-pressure plunger pump for direct diesel injection:-with an operating pressure of not more than 275 mpa,-designed to contact the crankshaft,-with an electromagnetic valve

Muud

For use in civil aircraft

Muud

Muud tööseadise vahelduvsuunalise liikumisega pumbad:

For use in civil aircraft

Dosing and proportioning pumps

Muud

Piston pumps

For use in civil aircraft

Muud:

Muud

For use in civil aircraft

Muud rootorpumbad:

For use in civil aircraft

Muud:

Hydraulic fluid power

Muud

For use in civil aircraft

Vane pumps

For use in civil aircraft

Muud:

Muud

For use in civil aircraft

Muud:

Muud

Submersible pumps

Multi-stage

Other, with a discharge outlet diameter

For use in civil aircraft

Exceeding 15 mm

For use in civil aircraft

Radial flow pumps

With single entry impeller

For use in civil aircraft

Electric brushless direct current motor with single-stage, radial flow pump centrifugal single entry impeller mounted on motor's shaft and volute with integrated heater of nominal power of 1800 w and soldered safety devices, monobloc with the motor, with:-a discharge outlet diameter of 20 mm or more,-9 slots stator,-6 pole rotor,-rated power of 95 w,-volute with clamped rubber hose outlet,-rotor chamber without sand filter

Muud

For use in civil aircraft

With more than one entry impeller

Muud

For use in civil aircraft

Muud tsentrifugaalpumbad:

For use in civil aircraft

Multi-stage

Muud

Pumbad:

Muud

Osad:

For use in civil aircraft

Pump head for two cylinder high pressure pump made of forged steel, with:- milled threaded fittings with a diameter of 10 mm or more but not more than 36.8 mm, and- drilled fuel channels with a diameter of 3.5 mm or more but not more than 10 mmof a kind used in diesel injection systems

Vedelikutõstukitele (-elevaatoritele)

Vaakumpumbad:

Muud:

For use in civil aircraft

Muud

Diffusion pumps, cryopumps and absorption pumps

Muud

For use in civil aircraft

Käsi- ja jalg-õhupumbad:

Muud:

Muud

Of a power not exceeding 0.4 kw

Muud

Hermetic or semi-hermetic

Muud:

Hermetic rotary compressors for either hydrofluorocarbon (hfc) or hydrocarbon refrigerants:- driven by ‘on-off’ single phase alternate current (ac) or ‘brushless direct current’ (bldc) variable speed motors,- with a nominal power rating of not more than 1.5kw,- a rated voltage of 100v or more but not more than 240v,- with a height of not more than 300mm,- an external diameter of not more than 150mm,- with a unit weight of not more than 15kg,for use in the manufacture of heat pumps for household appliances, including clothes dryers

Muud:

Vehicle air conditioning system part, consisting of an open shaft reciprocating compressor of a power of more than 0.4 kw but not more than 10 kw

Pukseerimiseks ratastega šassiile paigaldatud õhukompressorid:

Giving a flow per minute exceeding 2 m3

Laua-, põranda-, seina-, akna-, lae- ning katuseventilaatorid, mille iseseisva elektrimootori võimsus ei ületa 125 w:

Muud

Fans of a kind used solely or principally for cooling microprocessors, telecommunication apparatus, automatic data processing machines or units of automatic data processing machines

Axial fans

Axial fans with built-in motor, for the generation of an air flow for the cooling of compressors and the distribution of air with-a direct current operating voltage of more than 10 v but not more than 14 v, or -an alternating current operating voltage of more than 185 v, but not more than 254 v,-an operating temperature of -40 °c or higher, but not higher than 70 °c,for use in the manufacture of heat pump tumble dryers and refrigerators or freezers

Centrifugal fans

Radial fan, with:-a dimension of 25mm (height) x 85mm (width) x 85mm (depth),-a weight of 120 g,-a rated voltage of 13.6 vdc (direct current voltage),-an operating voltage of 9 vdc or more but not more than 16 vdc (direct current voltage),-a rated current of 1.1 a (typ),-a rated power of 15 w,-a rotation speed of 500 rpm (revolutions per minute) or more but not more than 4800 rpm (revolutions per minute) (free flow),-an air flow of not more than 17.5 litre/s,-an air pressure of not more than16 mm h2o ≈ 157 pa,-an overall sound pressure of not more than 58 db(a) at 4800 rpm (revolutions per minute), andwith a fin (fan interconnect network) interface for communication with the heating and air-conditioning control unit used in car seat ventilation systems

Electric blower for cooling the battery module:-with an operating voltage of 9 vdc or more but not more than 16 vdc,-with a centrifugal electric fan,-with a connector,-with a plastic case,-with or without a control unit for the fan electric motor,for use in the production of rechargeable batteries for hybrid and electric vehicles

Muud:

Muud

Gaasikindlad bioloogiliselt ohutud kaitsekapid

Turbo-compressors

For use in civil aircraft

Multi-stage

Muud

Not exceeding 15 bar, giving a flow per hour

For use in civil aircraft

Muud

For use in civil aircraft

Exceeding 15 bar, giving a flow per hour

For use in civil aircraft

Exceeding 120 m3

Muud

Single-shaft

Muud:

Hermetic heat pump compressor for r450a or r290 refrigerants:- not charged with refrigerant,- pre-charged with lubricant oil,- with a single phase induction permanent split capacitor motor or a dc brushless motor,- having suction and/or discharge connections,- with a displacement of 8.05 cm3 or more, but not more than 55 cm3,- running at 900 rpm or more, but not more than 7 800 rpm, and- with a cooling capacity of 920 w or more, but not more than 10 440 w in ashrae conditions

Multi-shaft

For use in civil aircraft

Muud:

Muud

For use in civil aircraft

Osad:

Fan assembly made of aluminium and magnesium alloy:-with an outer diameter of 54 mm or more but not more than 130 mm,-with a height of 8 mm or more but not more than 30 mm,-with two discs connected by blades of involute shape,-with or without dowel, and with or without washer,for use in the manufacture of electromotors

Scroll type compressor housing of an aluminium alloy of a kind with: -a heat resistance of 200 °c or more but not more than 250 °c,-one or more fixing points suitable for mounting an actuator,for use in the manufacture of turbochargers

Turbocharger wheel housing of cast aluminium alloy or cast iron:- with a heat resistance up to 400°c,- with a hole of 30 mm or more but not more than 300 mm for the insertion of the compressor wheel,for use in the automotive industry

Kliimaseadmed, mis koosnevad mootoriga varustatud ventilaatorist ning seadmetest õhutemperatuuri ja õhuniiskuse reguleerimiseks, k.. A seadmed, mis ei võimalda niiskust eraldi reguleerida:

Self-contained

Muud

Pre-charged with hydrofluorocarbons (hfcs)

Mootorsõidukites kasutatavad, inimeste jaoks:

Muud

Jahutusseadmega ning jahutus- ja kütterežiimi vahelise ümberlülitamise reguleerventiiliga (reverseeritavad soojuspumbad):

Muud:

Muud

For use in civil aircraft

Pre-charged with hydrofluorocarbons (hfcs)

Jahutusseadmeta:

Muud

Of air conditioning machines of subheading nos 8415 81, 8415 82 or 8415 83, for use in civil aircraft

Aluminium connecting block for automotive air conditioning systems:-with a t6 hardening,-equipped with round stubs with a circumferential outer groove,-with through or non-through holes, made of profiles with an upper radius of 8 mm or more but not more than 11 mm, and a lower radius of 12 mm or more but not more than 17 mm,-with a distance between holes of 15 mm or more but not more than 22 mm,-with sockets designed for brazing or clamping,-with mounting holes for m6 or m8 mounting screw, threaded or not,-with a width of 5 mm or more but not more than 16 mm,-for connecting a compressor, a condenser, an evaporator, a chiller and other lines

Pre-charged with hydrofluorocarbons (hfcs)

Vedelkütuse-, peenestatud tahkekütuse ning gaaskütusepõletid; mehaanilised kihtkolded, k.. A nende mehaanilised restid, mehaanilised tuhaeemaldid jms seadmed:

Incorporating an automatic control device

Muud põletid, k.. A kombineeritud:

Muud:

Muud

Osad

Ahjud ja kambrid metallimaakide ning püriitmaakide särdamiseks, sulatamiseks jms kuumtöötluseks

Tunnel ovens

Muud:

Ovens and furnaces for firing cement, glass or chemical products

Muud

Osad

Kombineeritud ehitusega külmikud-sügavkülmikud, eraldi välisustega või sahtlitega või nende kombinatsioonid:

For use in civil aircraft

Pre-charged with hydrofluorocarbons (hfcs)

Muud:

Muud:

Muud

Kompressoriga:

Pre-charged with hydrofluorocarbons (hfcs)

Muud:

Pre-charged with hydrofluorocarbons (hfcs)

Building-in type

Muud

Not exceeding 250 litres

Muud

Pre-charged with hydrofluorocarbons (hfcs)

Muud:

Muud

Of a capacity not exceeding 400 litres

Muud:

Muud

For use in civil aircraft

Pre-charged with hydrofluorocarbons (hfcs)

Kapikujulised sügavkülmikud mahuga kuni 900 l:

For use in civil aircraft

Pre-charged with hydrofluorocarbons (hfcs)

Of a capacity exceeding 250 litres but not exceeding 900 litres

Muud:

Muud

Refrigerated showcases and counters (incorporating a refrigerating unit or evaporator)

Pre-charged with hydrofluorocarbons (hfcs)

Muud:

Muud

Pre-charged with hydrofluorocarbons (hfcs)

Muud külmutus- ja sügavkülmutusseadmed; soojuspumbad:

For use in civil aircraft

Pre-charged with hydrofluorocarbons (hfcs)

Muud:

Muud:

Muud

Mööbel, millesse paigaldatakse külmutus- ja sügavkülmutusseadmed

Evaporators and condensers, excluding those for refrigerators of the household type

Muud:

Muud

Of refrigerating equipment adapted to the air-conditioning system, for use in certain types of aircraft

Receiver dryer profile for connecting to a condenser manifold in welding process with:-a braze flatness of not more than 0.2 mm,-a weight of 100 g or more but not more than 600 g,-a fixing rail in one piece

Pre-charged with hydrofluorocarbons (hfcs)

Masinad, tööstusotstarbelised ja laboratoorsed seadmed materjalide termiliseks töötluseks (kuumutamine, keetmine, röstimine, destilleerimine, rektifikatsioon, steriliseerimine, pastöriseerimine, aurutamine, kuivatamine, aurustamine, kondenseerimine, jahutamine jne), v.. A kodumajapidamises kasutatavad, elektriliselt või muul viisil köetavad (v.. A ahjud jm rubriigi 8514 seadmed); mitte-elektrilised kiirboilerid või mahtboilerid:

Gaaskütusel kiirboilerid

Muud

Kuivatid:

Muud, põllumajandustoodangu jaoks

Muud

Pre-assembled process module unit of an ethane cracker unit, containing: -quench water circulation loops, which contain a heat exchanger and circulation pumps to cool and recirculate quench water,-a water purification system, which removes hydrocarbon contaminants from quench water which is then re-used for dilution steam production (outside the module),-a pyrolysis oil purification system, which separates pyrolysis gasoline, heavy oil and coke fractions from the hydrocarbon contaminants that have been removed from the quench water,-an ethane feedstock start-up vaporizer and superheater, which vaporizes and heats ethane feedstock before sending the ethane to the cracking furnaces (outside the module),-a propane feedstock preparation system, which filters, vaporizes and superheats propane feedstock, before sending the propane to cracking furnaces (outside the module), and -a chemical grade propylene preparation system, which filters and dries chemical grade propylene before sending it to the deethanizer (outside the module)

Soojusvahetid:

Muud:

Pre-assembled process module unit of an ethane cracker unit, containing: -an open loop ethylene refrigeration system, which is to be integrated with an external ethylene refrigerant compressor,-pumps and a heat exchanger to deliver ethylene to an external pipeline, and-a closed loop propylene refrigeration system, which is to be integrated with an external propylene refrigerant compressor

Muud

Muud seadmed:

Percolators and other appliances for making coffee and other hot drinks

Muud

For use in civil aircraft

Muud:

Vacuum-vapour plant for the deposition of metal

Pre-assembled process module unit of an ethane cracker unit, containing:equipment associated with an external multi-stage, centrifugal cracked gas compressor which compresses hydrocarbon gases to allow further processing downstream in interconnected equipment containing:-​coolers,-vapor-liquid separation drums, and-pumps needed to condense and remove water and heavier hydrocarbons and to avoid undesirable formation of polymer by-products,equipment associated with an external caustic wash tower containing: -caustic water circulation pumps to support an external caustic wash tower in removing acid gasses (carbon dioxide and hydrogen sulphide) from the cracked gas, -a spent caustic pre-treatment system, containing separation drums, pumps and mixers, -a heat exchanger for the pre-cooling of cracked gas, and -a separation drum for the removal of water from cracker gas

Osad:

Muud:

Silicone or plastic keyboards, comprising:-parts of common metal, and-whether or not comprising parts of plastic,-epoxy resin reinforced with fiberglass or wood,-whether or not printed or surface-treated,-with or without electrical conductors-with or without a membrane bonded to the keyboard,-with or without mono or multilayer protective film

Kalandrid jm rullimisseadmed (valtsimisseadmed), v.. A seadmed metallide ning klaasi valtsimiseks; nende rullid (valtsid):

Of a kind used in the textile industry

Muud:

Muud

Valtsid, rullid:

Muud

Tsentrifuugid, k.. A tsentrifugaalkuivatid; seadmed vedelike või gaaside filtreerimiseks või puhastamiseks:

Koorelahutid

Muud:

Muud

Vee puhastamiseks või filtreerimiseks:

Muud

Sisepõlemismootorite õli- ja kütusefiltrid:

Muud

Made of fluoropolymers and with filter or purifier membrane thickness not exceeding 140 microns

For use in civil aircraft

Seadmed gaaside filtreerimiseks või puhastamiseks:

For use in civil aircraft

Katalüüsmuundurid või osakeste filtrid, kombineeritud või mitte, sisepõlemismootorite heitgaaside puhastamiseks või filtreerimiseks

With stainless steel housing, and with inlet and outlet tube bores with inside diameters not exceeding 1.3 cm

Machinery and apparatus for filtering or purifying air

Muud

By a catalytic process

Muud

For use in civil aircraft

Osad:

Muud:

Muud:

Parts of equipment for the purification of water by reverse osmosis, consisting essentially of plastic-based membranes, supported internally by woven or non-woven textile materials which are wound round a perforated tube, and enclosed in a cylindrical plastic casing of a wall-thickness of not more than 4 mm, whether or not housed in a cylinder of a wall-thickness of 5 mm or more

Nõudepesumasinad; seadmed pudelite ning muude mahutite pesuks ja kuivatamiseks; seadmed pudelite, purkide, karpide, kottide jms mahutite täitmiseks, korkimiseks, sulgemiseks, kaanetamiseks või sildistamiseks; seadmed pudelite, purkide, tuubide jm taoliste mahutite kapseldamiseks; muud pakendamis- või pakkimisseadmed; seadmed jookide gaseerimiseks:

Olmemasinad

Seadmed pudelite jms mahutite pesuks ja kuivatamiseks

Muud pakendamis- või pakkimisseadmed (k.. A kuumkahanevasse kilesse pakkimise seadmed)

Of dishwashing machines

Kaalud (v.. A kaalud tundlikkusega 5 cg ja täpsemad), k.. A kaalutundlikud loendurid ja kaalukontrolli seadmed; igat tüüpi kaaluvihid:

Household scales

Kaalud kaupade pidevkaalumiseks konveierliinidel:

Muud

Using electronic means for gauging weight

Muud kaalud ja seadmed:

Using electronic means for gauging weight

Machinery for weighing and labelling pre-packaged goods

Muud

Maksimummassile üle 30 kg, kuid mitte üle 5 000 kg:

Muud:

Muud

Using electronic means for gauging weight

Igat tüüpi kaaluvihid; kaalude ja kaalumisseadmete osad:

Muud

Tulekustutid, nii laetud kui laadimata:

Muud

Aurujoapritsid, liivapritsid jms seadmed:

With heating device

Muud seadmed:

Muud

Kantavad pritsid

Sprayers and powder distributors designed to be mounted on or drawn by tractors

Muud kodumasinad

Watering appliances

Muud:

Muud

Parts of mechanical appliances of subheading 8424 89 40

Of fire extinguishers, for use in certain types of aircraft

Talid ja tõstukid, v.. A skipptõstukid; vintsid ja pelid (kepslid); tungrauad:

Elektrimootoriga

Vintsid; kepselid:

Muud

Statsionaarsed autogaraažide tõstukid

Muud

Sildkraanad, laadimissillad, pukk-kraanad, mobiilsed tõsteraamid, kärutõstukid:

Mobiilsed pneumoratastõsteraamid ning kärutõstukid

Tornkraanad

Muud iseliikuvad masinad ja mehhanismid

Muud

Monteerimiseks maanteesõidukitele:

Muud

Kahvellaadurid; muud tõste- või teisaldusmehhanismiga varustatud veokid:

With a lifting height of 1 m or more

Muud

Muud iseliikuvad autolaadurid:

Rough terrain fork-lift and other stacking trucks

Mobile access equipment designed for the lifting of persons, with a maximum working height of 6 meters or more

Muud

Hand pallet trucks

Muud

Muud

Liftid ning skipptõstukid:

Muud

For bulk materials

Muud pidevtoimega elevaatorid ning konveierid kaupadele ja materjalidele:

Muud koppelevaatorid ja -konveierid

Muud:

Muud

Köisteed, isteliftid, suusatõstukid; köisraudteede (funikulööride) veomehhanismid

Muud seadmed:

Designed for attachment to agricultural tractors

Muud:

Muud

Buldooserid ja planeerimisbuldooserid:

Muud

Skreeperid

Roadrollers

Muud

Mehaanilised kopad, ekskavaatorid ja kopplaadurid:

Loaders specially designed for underground use

Crawler shovel loaders

360-kraadise pöördeulatusega masinad:

Muud

Muud pinnase teisaldamis-, profileerimis-, planeerimis-, tasandus-, kaevamis-, tampimis-, puurimis- ning lõikemehhanismid mullatööde tegemiseks ning maakide ja mineraalide kaevandamiseks; vaiarammid ja -tõmburid; lumesahad ja -puhurid:

Lumesahad ja lumepuhurid

Iseliikuvad

Puurimismasinad ja muud pinnaseläbindusmehhanismid:

Muud

Muud mitte-iseliikuvad masinad ja mehhanismid:

Muud

Rubriigi 8425 masinatele

Chassis and hydraulics for hand pallet trucks

Muud

Chassis and hydraulics, with a so-called ‘weight indication system’ consisting of a weighing mechanism not integrated in the chassis, that is to say not integrated in the forks

Muud

Liftidele, skipptõstukitele ja eskalaatoritele

Pre-assembled or ready-to-assemble sections of self-propelled mobile access equipment designed for the lifting of persons, excluding individual components when presented separately

Muud

Kopad, kühvlid, greiferid ja haaratsid

Alamrubriikide 8430 41 ja 8430 49 puurimis- ja pinnaseläbindusmasinate osad

Of cast iron or cast steel

Muud

Certain types of steel shoes, with or without rubber pads attached thereto, whether or not assembled in a track chain, with a maximum length of 3000 mm, used on machines currently falling under headings 8426, 8429 or 8430, or conveyor belts currently falling under heading 8428

Põllu-, aia- ja metsatöömasinad maa ettevalmistamiseks ning kultiveerimiseks; rullid spordiväljakute ja muruplatside korrashoiuks:

Äkked, kobestid, kultivaatorid, rohimis- ja kõrrekoorimismasinad:

Muud:

Harrows

Muud

Otsekülvikud, istutus- ja ümberistutusmasinad taimede töötlemata pinnasele istutamiseks

Seeders

Muud

Sõnnikulaoturid ja väetisekülvikud:

Väetisekülvikud

Osad

Niidukid muruplatside, parkide ning spordiväljakute korrashoiuks:

Electric

Iseliikuvad

Muud

Muud:

Electric

Iseliikuvad

Muud

Without motor

With motor

Designed to be carried on or hauled by a tractor

Muud heinatöömasinad

Muud saagikoristusmasinad; viljapeksumasinad:

Muud viljapeksumasinad

Potato diggers and potato harvesters

Muud

Forage harvesters

Muud

Seadmed kanamunade, puuviljade jm põllumajandussaaduste puhastamiseks, sorteerimiseks ja liigitamiseks

Lüpsimasinad ja piimandusmasinad:

Piimandusmasinad

Pressid, peenestid jm seadmed veini, siidri, puuviljamahlade jms jookide valmistamiseks:

Osad

Masinad ja seadmed loomasööda valmistamiseks

Inkubaatorid ja tibusoojendid (bruuderid)

Muud seadmed:

Muud

Linnukasvatusseadmetele ja masinatele

Part containing:- a single-phase ac motor,- an epicyclic gearing,- a cutter bladeand whether or not containing:- a capacitor,- a part fitted with a threaded boltfor use in the manufacture of garden shredders

Seadmed seemne-, tera- ja kaunviljade puhastamiseks, sorteerimiseks ning liigitamiseks; jahu valmistamisel ning tera- ja kuivatatud kaunviljade töötlemisel kasutatavad mehhanismid, v.. A farmides kasutatavad seadmed:

Muud seadmed

Mujal käesolevas grupis nimetamata seadmed, mida kasutatakse toiduainetööstuses ning toitude ja jookide valmistamisel, v.. A seadmed loomsete ja mittelenduvate taimsete või mikroobsete rasvade või õlide ekstraheerimiseks ning puhastamiseks:

Bakery machinery

Kondiitritööstuses, kakaopulbri ja šokolaadi valmistamisel kasutatavad seadmed

Õllepruulimisseadmed

Puuviljade, pähklite ning aedviljade töötlemise seadmed

For the preparation of tea or coffee

For the preparation or manufacture of drink

Osad

Paberi- või tsellulooskiumassi valmistamiseks

Paberi ning papi viimistlemiseks

Paberi- või tsellulooskiumassi valmistamise seadmetele

Suction-roll shells, produced by centrifugal casting, not drilled, in the form of alloy-steel tubes, of a length of 3 000 mm or more and an external diameter of 550 mm or more

Raamatute köitmisseadmed, k.. A niitõmblusmasinad:

Folding machines

Sewing, wire stitching and stapling machines

Muud

Muud seadmed paberi-, pabermassi- ja papitoodete valmistamiseks, k.. A seadmed paberi ja papi lõikamiseks:

Combined reel slitting and re-reeling machines

Guillotines

Seadmed kottide ja ümbrike valmistamiseks

Seadmed esemete vormimiseks paberimassist, paberist ja papist

Osad:

Muud

Masinad ja seadmed

Trükiplaadid, silindrid jm trükivormid; ettevalmistatud trükiplaadid, -silindrid ja litokivid (näiteks tasandatud, lihvitud või poleeritud)

Trükimasinad, mis kasutavad trükkimiseks trükiplaate, -silindreid jm rubriiki 8442 kuuluvaid trükivorme:

Büroo ofsettrükimasinad, lehtedele, mille ühe külje pikkus kokkuvoltimata on kuni 22 cm ja teise külje pikkus kuni 36 cm

Sheet fed

New, taking sheets of a size

Exceeding 53 × 75 cm but not exceeding 75 × 107 cm

Muud

Kõrgtrükimasinad, muule kui rullmaterjalile, v.. A fleksotrükiseadmed

Sügavtrükiseadmed (ülekandepressid)

For printing textile materials

Muud

Kahte või enamat printimise, kopeerimise või faksimise funktsiooni täitvad seadmed, mis on ühendatavad automaatse andmetöötlusseadmega või arvutivõrku

Printers

Muud

Osad ja tarvikud trükimasinatele, mis kasutavad trükkimiseks trükiplaate, -silindreid jm rubriiki 8442 kuuluvaid trükivorme:

Muud:

Muud

Electronic assemblies

Seadmed keemiliste tekstiilkiudude ekstrusiooniks, tõmbamiseks, tekstureerimiseks või lõikamiseks:

Muud

Tekstiilkiudude ettevalmistamisseadmed:

Kamm-masinad

Muud

Dubleerimis- või korrutusmasinad

Muud

Kuni 30 cm laiuse kanga kudumiseks

Mehaanilised

Üle 30 cm laiuse kanga kudumiseks, süstikuta

Ringkudumismasinad:

Silindri läbimõõduga üle 165 mm

Warp knitting machines (including raschel type); stitch-bonding machines

Muud

Rubriikide 8444-8447 masinate lisaseadmed:

Muud

Rubriigi 8445 masinate ja nende lisaseadmete osad ja tarvikud:

Muud osad tekstiilkiudude ettevalmistusseadmetele

Muud

Soad, niied ning niieraamid

Rubriigi 8447 masinate ja nende lisaseadmete osad ja tarvikud:

Sinkers

Muud

Pesumasinad, kodumajapidamises või pesulates kasutatavad, k.. A kuivatusseadmega pesumasinad:

Täisautomaatsed:

Front-loading machines

Each of a dry linen capacity exceeding 6 kg but not exceeding 10 kg

Muud

Osad

Kuivpuhastusseadmed

Mahutavusega kuni 10 kg kuiva pesu

Triikimismasinad ja pressid (k.. A riiet kokkusulatavad pressid)

Seadmed riide kokku- ja lahtikerimiseks, voltimiseks, lõikamiseks ja läbilöömiseks

Machines used in the manufacture of linoleum or other floor coverings for applying the paste to the base fabric or other support

Muud

Õmblusmasinad (v.. A rubriigi 8440 niitõmblusmasinad raamatute õmblemiseks), spetsiaalselt õmblusmasinatele ettenähtud mööbel, alused ja katted; õmblusmasinanõelad:

Sewing machines (lock-stitch only), with heads of a weight not exceeding 16 kg without motor or 17 kg including the motor; sewing machine heads (lock-stitch only), of a weight not exceeding 16 kg without motor or 17 kg including the motor

Muud

Muud õmblusmasinad (tööstusotstarbelised):

Muud

Mööbel, alused ja katted õmblusmasinatele ning nende osad; muud õmblusmasinate osad

Seadmed naha või toornaha eeltöötluseks, parkimiseks ja töötlemiseks

Muud seadmed

Metallurgias ja valutööstuses kasutatavad konverterid, valukopad, metallvaluvormid ja valamismasinad:

Valuvormid ja valukopad

For casting under pressure

Osad

Toruvaltspingid

Kuumvaltspingid ning kombineeritud kuum- ja külmvaltspingid

Valtsid:

Of open-die forged steel

Cold-rolling work-rolls

Muud osad

Laser- või muu valgus- või footonkiire toimel töötavad:

Of a kind used solely or principally for the manufacture of printed circuits, printed circuit assemblies, parts of heading 8517, or parts of automatic data processing machines

Muu valgus- või footonkiire toimel töötavad:

Muud

Elektroerosioonpingid:

Wire-cut

Muud

Vesilõikurseadmed

Töötluskeskused, ühe- ja mitmepositsioonilised metallitöötlemise automaattööpingid:

Horizontal

Ühepositsioonilised automaattööpingid

Arvjuhtimisega

Metallitreipingid (k.. A treikeskused):

Arvjuhtimisega:

Automatic lathes

Multi-spindle

Muud

Arvjuhtimisega:

Muud

Metallilõikepingid (k.. A järjestikuse protsessiga agregaattööpingid) puurimiseks, sisetreimiseks, freesimiseks, sise- ja väliskeermete lõikamiseks, v.. A rubriigis 8458 nimetatud treipingid (treikeskused):

Muud puurpingid:

Muud

Arvjuhtimisega

Muud sisetreipingid:

Muud

Arvjuhtimisega

Muud freespingid: