Tariffy


 

Browse HS Codes - 87: Vehicles other than railway or tramway rolling stock, and parts and accessories thereof:

8701
Tractors (other than tractors of heading 8709):
8701.10.00.00
Single axle tractors
8701.A
Road tractors for semi-trailers:
8701.21
With only compression-ignition internal combustion piston engine (diesel or semi-diesel):
8701.21.10.00
New
8701.21.90.00
Used
8701.22
With both compression-ignition internal combustion piston engine (diesel or semi-diesel) and electric motor as motors for propulsion:
8701.22.10.00
New
8701.22.90.00
Used
8701.23
With both spark-ignition internal combustion piston engine and electric motor as motors for propulsion:
8701.23.10.00
New
8701.23.90.00
Used
8701.24
With only electric motor for propulsion:
8701.24.10.00
New
8701.24.90.00
Used
8701.29.00.00
Other
8701.30.00.00
Track-laying tractors
8701.B
Other, of an engine power:
8701.91
Not exceeding 18 kw:
8701.91.10.00
Agricultural tractors and forestry tractors, wheeled
8701.91.90.00
Other
8701.92
Exceeding 18 kw but not exceeding 37 kw:
8701.92.10.00
Agricultural tractors and forestry tractors, wheeled
8701.92.90.00
Other
8701.93
Exceeding 37 kw but not exceeding 75 kw:
8701.93.10.00
Agricultural tractors and forestry tractors, wheeled
8701.93.90.00
Other
8701.94
Exceeding 75 kw but not exceeding 130 kw:
8701.94.10.00
Agricultural tractors and forestry tractors, wheeled
8701.94.90.00
Other
8701.95
Exceeding 130 kw:
8701.95.10.00
Agricultural tractors and forestry tractors, wheeled
8701.95.90.00
Other
8702
Motor vehicles for the transport of ten or more persons, including the driver:
8702.10
With only compression-ignition internal combustion piston engine (diesel or semi-diesel):
8702.10.A
Of a cylinder capacity exceeding 2 500 cm3:
8702.10.11.00
New
8702.10.19.00
Used
8702.10.B
Of a cylinder capacity not exceeding 2 500 cm3:
8702.10.91.00
New
8702.10.99.00
Used
8702.20
With both compression-ignition internal combustion piston engine (diesel or semi-diesel) and electric motor as motors for propulsion:
8702.20.10.00
Of a cylinder capacity exceeding 2 500 cm3
8702.20.90.00
Of a cylinder capacity not exceeding 2 500 cm3
8702.30
With both spark-ignition internal combustion piston engine and electric motor as motors for propulsion:
8702.30.10.00
Of a cylinder capacity exceeding 2 800 cm3
8702.30.90.00
Of a cylinder capacity not exceeding 2 800 cm3
8702.40.00.00
With only electric motor for propulsion
8702.90
Other:
8702.90.A
With spark-ignition internal combustion piston engine:
8702.90.A.A
Of a cylinder capacity exceeding 2 800 cm3:
8702.90.11.00
New
8702.90.19.00
Used
8702.90.A.B
Of a cylinder capacity not exceeding 2 800 cm3:
8702.90.31.00
New
8702.90.39.00
Used
8702.90.90.00
With other engines
8703
Motor cars and other motor vehicles principally designed for the transport of persons (other than those of heading 8702), including station wagons and racing cars:
8703.10
Vehicles specially designed for travelling on snow; golf cars and similar vehicles:
8703.10.11.00
Vehicles specially designed for travelling on snow, with compression-ignition internal combustion piston engine (diesel or semi-diesel), or with spark-ignition internal combustion piston engine
8703.10.18.00
Other
8703.A
Other vehicles, with only spark-ignition internal combustion piston engine:
8703.21
Of a cylinder capacity not exceeding 1 000 cm3:
8703.21.10.00
New
8703.21.90.00
Used
8703.22
Of a cylinder capacity exceeding 1 000 cm3 but not exceeding 1 500 cm3:
8703.22.10.00
New
8703.22.90.00
Used
8703.23
Of a cylinder capacity exceeding 1 500 cm3 but not exceeding 3 000 cm3:
8703.23.A
New:
8703.23.11.00
Motor caravans
8703.23.19.00
Other
8703.23.90.00
Used
8703.24
Of a cylinder capacity exceeding 3 000 cm3:
8703.24.10.00
New
8703.24.90.00
Used
8703.B
Other vehicles, with only compression-ignition internal combustion piston engine (diesel or semi-diesel):
8703.31
Of a cylinder capacity not exceeding 1 500 cm3:
8703.31.10.00
New
8703.31.90.00
Used
8703.32
Of a cylinder capacity exceeding 1 500 cm3 but not exceeding 2 500 cm3:
8703.32.A
New:
8703.32.11.00
Motor caravans
8703.32.19.00
Other
8703.32.90.00
Used
8703.33
Of a cylinder capacity exceeding 2 500 cm3:
8703.33.A
New:
8703.33.11.00
Motor caravans
8703.33.19.00
Other
8703.33.90.00
Used
8703.40
Other vehicles, with both spark-ignition internal combustion piston engine and electric motor as motors for propulsion, other than those capable of being charged by plugging to external source of electric power:
8703.40.10
New:
8703.40.10.10
Of a cylinder capacity not exceeding 1 000 cm3
8703.40.10.90
Other
8703.40.90
Used:
8703.40.90.10
Of a cylinder capacity not exceeding 1 000 cm3
8703.40.90.90
Other
8703.50.00.00
Other vehicles, with both compression-ignition internal combustion piston engine (diesel or semi-diesel) and electric motor as motors for propulsion, other than those capable of being charged by plugging to external source of electric power
8703.60
Other vehicles, with both spark-ignition internal combustion piston engine and electric motor as motors for propulsion, capable of being charged by plugging to external source of electric power:
8703.60.10
New:
8703.60.10.10
Of a cylinder capacity not exceeding 1 000 cm3
8703.60.10.90
Other
8703.60.90
Used:
8703.60.90.10
Of a cylinder capacity not exceeding 1 000 cm3
8703.60.90.90
Other
8703.70.00.00
Other vehicles, with both compression-ignition internal combustion piston engine (diesel or semi-diesel) and electric motor as motors for propulsion, capable of being charged by plugging to external source of electric power
8703.80
Other vehicles, with only electric motor for propulsion:
8703.80.10
New:
8703.80.10.10
New battery electric vehicles, principally designed for the transport of nine or less persons, including the driver, excluding l category vehicles according to regulation (eu) no 168/2013 and motorcycles, propelled (regardless of the number of wheels set in motion) solely by one or more electric motors, including those with an internal combustion range extender (an auxiliary power unit)
8703.80.10.90
Other
8703.80.90.00
Used
8703.90.00.00
Other
8704
Motor vehicles for the transport of goods:
8704.10
Dumpers designed for off-highway use:
8704.10.10.00
With compression-ignition internal combustion piston engine (diesel or semi-diesel), or with spark-ignition internal combustion piston engine
8704.10.90.00
Other
8704.A
Other, with only compression-ignition internal combustion piston engine (diesel or semi-diesel):
8704.21
Of a gross vehicle weight not exceeding 5 tonnes:
8704.21.10.00
Specially designed for the transport of highly radioactive materials
8704.21.A
Other:
8704.21.A.A
With engines of a cylinder capacity exceeding 2 500 cm3:
8704.21.31.00
New
8704.21.39.00
Used
8704.21.A.B
With engines of a cylinder capacity not exceeding 2 500 cm3:
8704.21.91.00
New
8704.21.99.00
Used
8704.22
Of a gross vehicle weight exceeding 5 tonnes but not exceeding 20 tonnes:
8704.22.10.00
Specially designed for the transport of highly radioactive materials
8704.22.A
Other:
8704.22.91.00
New
8704.22.99.00
Used
8704.23
Of a gross vehicle weight exceeding 20 tonnes:
8704.23.10.00
Specially designed for the transport of highly radioactive materials
8704.23.A
Other:
8704.23.91.00
New
8704.23.99.00
Used
8704.B
Other, with only spark-ignition internal combustion piston engine:
8704.31
Of a gross vehicle weight not exceeding 5 tonnes:
8704.31.10.00
Specially designed for the transport of highly radioactive materials
8704.31.A
Other:
8704.31.A.A
With engines of a cylinder capacity exceeding 2 800 cm3:
8704.31.31.00
New
8704.31.39.00
Used
8704.31.A.B
With engines of a cylinder capacity not exceeding 2 800 cm3:
8704.31.91.00
New
8704.31.99.00
Used
8704.32
Of a gross vehicle weight exceeding 5 tonnes:
8704.32.10.00
Specially designed for the transport of highly radioactive materials
8704.32.A
Other:
8704.32.91.00
New
8704.32.99.00
Used
8704.C
Other, with both compression-ignition internal combustion piston engine (diesel or semi-diesel) and electric motor as motors for propulsion:
8704.41
Of a gross vehicle weight not exceeding 5 tonnes:
8704.41.10.00
Specially designed for the transport of highly radioactive materials
8704.41.A
Other:
8704.41.A.A
With engines of a cylinder capacity exceeding 2 500 m³:
8704.41.31.00
New
8704.41.39.00
Used
8704.41.A.B
With engines of a cylinder capacity not exceeding 2 500 cm³:
8704.41.91.00
New
8704.41.99.00
Used
8704.42
Of a gross vehicle weight exceeding 5 tonnes but not exceeding 20 tonnes:
8704.42.10.00
Specially designed for the transport of highly radioactive materials
8704.42.A
Other:
8704.42.91.00
New
8704.42.99.00
Used
8704.43
Of a gross vehicle weight exceeding 20 tonnes:
8704.43.10.00
Specially designed for the transport of highly radioactive materials
8704.43.A
Other:
8704.43.91.00
New
8704.43.99.00
Used
8704.D
Other, with both spark-ignition internal combustion piston engine and electric motor as motors for propulsion:
8704.51
Of a gross vehicle weight not exceeding 5 tonnes:
8704.51.10.00
Specially designed for the transport of highly radioactive materials
8704.51.A
Other:
8704.51.A.A
With engines of a cylinder capacity exceeding 2 800 cm³:
8704.51.31.00
New
8704.51.39.00
Used
8704.51.A.B
With engines of a cylinder capacity not exceeding 2 800 cm³:
8704.51.91.00
New
8704.51.99.00
Used
8704.52
Of a gross vehicle weight exceeding 5 tonnes:
8704.52.10.00
Specially designed for the transport of highly radioactive materials
8704.52.A
Other:
8704.52.91.00
New
8704.52.99.00
Used
8704.60.00.00
Other with only electric motor for propulsion
8704.90.00.00
Other
8705
Special purpose motor vehicles, other than those principally designed for the transport of persons or goods (for example, breakdown lorries, crane lorries, fire fighting vehicles, concrete-mixer lorries, road sweeper lorries, spraying lorries, mobile workshops, mobile radiological units):
8705.10.00.00
Crane lorries
8705.20.00.00
Mobile drilling derricks
8705.30.00.00
Fire fighting vehicles
8705.40.00.00
Concrete-mixer lorries
8705.90
Other:
8705.90.30.00
Concrete-pumping vehicles
8705.90.80.00
Other
8706
Chassis fitted with engines, for the motor vehicles of headings 8701 to 8705:
8706.A
Chassis for tractors of heading 8701; chassis for motor vehicles of heading 8702, 8703 or 8704, with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity exceeding 2 500 cm3 or with a spark-ignition internal combustion piston engine of a cylinder capacity exceeding 2 800 cm3:
8706.00.11.00
For vehicles of heading 8702 or 8704
8706.00.19.00
Other
8706.B
Other:
8706.00.91.00
For vehicles of heading 8703
8706.00.99.00
Other
8707
Bodies (including cabs), for the motor vehicles of headings 8701 to 8705:
8707.10
For the vehicles of heading 8703:
8707.10.10.00
For industrial assembly purposes
8707.10.90.00
Other
8707.90
Other:
8707.90.10.00
For the industrial assembly of:pedestrian-controlled tractors of subheading 8701 10;vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm3 or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm3;special purpose motor vehicles of heading 8705
8707.90.90.00
Other
8708
Parts and accessories of the motor vehicles of headings 8701 to 8705:
8708.10
Bumpers and parts thereof:
8708.10.10
For the industrial assembly of:vehicles of heading 8703;vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm3 or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm3;vehicles of heading 8705:
8708.10.10.10
Plastic cover for filling the space between the fog lights and the bumper whether or not with a chrome strip for use in the manufacture of goods of chapter 87
8708.10.10.90
Other
8708.10.90
Other:
8708.10.90.10
Plastic cover for filling the space between the fog lights and the bumper whether or not with a chrome strip for use in the manufacture of goods of chapter 87
8708.10.90.90
Other
8708.A
Other parts and accessories of bodies (including cabs):
8708.21
Safety seat belts:
8708.21.10.00
For the industrial assembly of:vehicles of heading 8703;vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm3 or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm3;vehicles of heading 8705
8708.21.90.00
Other
8708.22
Front windscreens (windshields), rear windows and other windows specified in subheading note 1 to this chapter:
8708.22.10.00
For the industrial assembly of:pedestrian-controlled tractors of subheading 8701 10;vehicles of heading 8703;vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm3 or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm3;vehicles of heading 8705
8708.22.90.00
Other
8708.29
Other:
8708.29.10.00
For the industrial assembly of:pedestrian-controlled tractors of subheading 8701 10;vehicles of heading 8703;vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm3 or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm3;vehicles of heading 8705
8708.29.90.00
Other
8708.30
Brakes and servo-brakes; parts thereof:
8708.30.10
For the industrial assembly of:pedestrian-controlled tractors of subheading 8701 10;vehicles of heading 8703;vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm3 or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm3;vehicles of heading 8705:
8708.30.10.40
Body of disc type brake in bir ("ball in ramp") or epb ("electronic parking brake") or with hydraulic function only, containing functional and mounting openings and guide grooves, of a kind used in the manufacture of goods of chapter 87
8708.30.10.70
Ductile cast iron brake caliper jaw, of a kind used in the manufacture of goods of chapter 87
8708.30.10.90
Other
8708.30.A
Other:
8708.30.91
For disc brakes:
8708.30.91.30
Body of disc type brake in bir ("ball in ramp") or epb ("electronic parking brake") or with hydraulic function only, containing functional and mounting openings and guide grooves, of a kind used in the manufacture of goods of chapter 87
8708.30.91.40
Ductile cast iron brake caliper jaw, of a kind used in the manufacture of goods of chapter 87
8708.30.91.90
Other
8708.30.99.00
Other
8708.40
Gear boxes and parts thereof:
8708.40.20
For the industrial assembly of:pedestrian-controlled tractors of subheading 8701 10;vehicles of heading 8703;vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm3 or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm3;vehicles of heading 8705:
8708.40.20.20
Automatic hydrodynamic gearbox- with a hydraulic torque converter,- without transfer box and cardan shaft,- whether or not with front differential,for use in the manufacture of motor vehicles of chapter 87
8708.40.20.70
Manual gearbox in cast aluminium housing for transverse installation with: -a width of not more than 480 mm, -a height of not more than 400 mm, -a length of not more than 550 mm, -five or six gears, -a differential gear, -an engine torque of 400 nm or less,for use in the manufacture of motor vehicles of heading 8703
8708.40.20.80
Transmission gearbox without torque converter, with: -dual clutch, -7 or more forward gears, -1 reverse gear, -a maximum torque of 390 nm, -whether or not with electric motor integrated, -a height of 400 mm or more but not more than 600 mm, -a width of 350 mm or more but not more than 600 mm, and -a weight of 70kg or more but not more than 110 kg,for use in the manufacture of motor vehicles of heading 8703
8708.40.20.90
Other
8708.40.A
Other:
8708.40.50
Gear boxes:
8708.40.50.10
Automatic hydrodynamic gearbox- with a hydraulic torque converter,- without transfer box and cardan shaft,- whether or not with front differential,for use in the manufacture of motor vehicles of chapter 87
8708.40.50.60
Manual gearbox in cast aluminium housing for transverse installation with: -a width of not more than 480 mm, -a height of not more than 400 mm, -a length of not more than 550 mm, -five or six gears, -a differential gear, -an engine torque of 400 nm or less,for use in the manufacture of motor vehicles of heading 8703
8708.40.50.70
Automatic transmission equipped with double clutch system with: -at least 8 gears, -an engine torque of 800 nm or more, -an electronic differential, -a p-lock safety system, and -a tcu transmission control unit,for use in the manufacture of motor vehicles of heading 8703
8708.40.50.90
Other
8708.40.A.A
Parts:
8708.40.91.00
Of closed-die forged steel
8708.40.99.00
Other
8708.50
Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof:
8708.50.20
For the industrial assembly of:vehicles of heading 8703;vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm3 or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm3;vehicles of heading 8705:
8708.50.20.15
Spherical outboard constant velocity joint ball bearing cage, part of the vehicle's drive system, made of material suitable to be carburized with a carbon content of 0,14 % or more but not more than 0,57 %, forged, turned, punched, milled and hardened
8708.50.20.18
Propeller shaft for torque transmission from the gearbox to the rear axle, consisting of: -two cardan rods, -central universal joint, -central bearing with suspension in a plastic cover, -universal joints on both ends of the shaft, -slip, tube and end yokes, -of a length of 1,4 m or more but not more than 2,4 m,for use in the production of goods of chapter 87
8708.50.20.20
Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middle - of a length of 1 m or more but not more than 2 m, - of a weight of 6 kg or more but not more than 9 kg
8708.50.20.25
Ball-type outboard constant velocity joint housing for transmitting a torque from the engine and transmission to the wheels of motor vehicles, in a form of an outer race, with: -6 ball tracks or more but not more than 8, with -a thread, -an external involute spline with 21 or more but not more than 38 teeth, -for running with bearing balls made of steel with a carbon content of 0,48 % or more but not more than 0,57 %, -forged, turned, milled and hardened
8708.50.20.35
Inboard constant velocity joint tripod housing, with: -an outer diameter of 67,0 mm or more but not more than 99,0 mm, -3 cold calibrated roller tracks with a diameter of 29,95 mm or more but not more than 49,2 mm, -an external spline with 21 teeth or more but not more than 41, -forged, turned, rolled and hardened
8708.50.20.45
Outboard constant velocity joint inner race, part of the vehicle's drive system, with: -6 or more but not more than 8 ball tracks, suitable for bearing balls with a diameter of 12,0 mm or more but not more than 24,0 mm, -forged, turned, milled, broached and hardened
8708.50.20.50
Double flange bearing of 3rd generation, for motor vehicles,- with double-row ball bearing,- whether or not with impulse (encoder) ring,- whether or not with antilock brake system (abs) sensor,- whether or not with mounted screws,for use in the manufacture of goods of chapter 87
8708.50.20.55
Inboard constant velocity joint tripod spider, part of the vehicle's drive system, with: -3 trunnions with a diameter of 17,128 mm or more but not more than 25,468 mm, -forged, turned, broached and hardened
8708.50.20.70
Housing of tripod type half shaft inboard joint for transmitting a torque from engine and transmission to wheels of motor vehicles with:-an outer diameter of 67,0 mm or more but not more than 84,5 mm,-3 cold calibrated roller tracks with a diameter of 29,90 mm or more but not more than 36,60 mm,- sealing diameter 34,0 mm or more but not more than 41,0 mm, without lead angle,-spline with 21 teeth or more but not more than 35,-bearing seat diameter of 25,0 mm or more but not more than 30,0 mm, with or without oil grooves
8708.50.20.75
Outboard joint assembly for transmitting a torque from engine and transmission to wheels of motor vehicles, consisting of:-an inner race with 6 ball tracks for running with the bearing balls with a diameter 15,0 mm or more but not more than 20,0 mm,-an outer race with 6 ball tracks for running with 6 bearing balls, made of steel with carbon content of 0,45 % or more but not more than 0,58 %, with thread and with a spline with 26 teeth or more but not more than 38,-a spherical cage keeping bearing balls in the ball tracks of outer race and inner race in proper angular position, made of material suitable for carburizing with carbon content of 0,14 % or more but not more than 0,25 %, and-with a grease compartment,capable of working at constant speed at variable articulation angle not higher than 50 degrees
8708.50.20.90
Other
8708.50.A
Other:
8708.50.35.00
Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles
8708.50.A.A
Parts:
8708.50.55
Of closed-die forged steel:
8708.50.55.20
Double flange bearing of 3rd generation, for motor vehicles,- with double-row ball bearing,- whether or not with impulse (encoder) ring,- whether or not with antilock brake system (abs) sensor,- whether or not with mounted screws,for use in the manufacture of goods of chapter 87
8708.50.55.50
Spherical outboard constant velocity joint ball bearing cage, part of the vehicle's drive system, made of material suitable to be carburized with a carbon content of 0,14 % or more but not more than 0,57 %, forged, turned, punched, milled and hardened
8708.50.55.90
Other
8708.50.A.A.A
Other:
8708.50.91
For non-driving axles:
8708.50.91.10
Double flange bearing of 3rd generation, for motor vehicles,- with double-row ball bearing,- whether or not with impulse (encoder) ring,- whether or not with antilock brake system (abs) sensor,- whether or not with mounted screws,for use in the manufacture of goods of chapter 87
8708.50.91.90
Other
8708.50.99
Other:
8708.50.99.10
Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middle - of a length of 1 m or more but not more than 2 m, - of a weight of 6 kg or more but not more than 9 kg
8708.50.99.25
Housing of tripod type half shaft inboard joint for transmitting a torque from engine and transmission to wheels of motor vehicles with:-an outer diameter of 67,0 mm or more but not more than 84,5 mm,-3 cold calibrated roller tracks with a diameter of 29,90 mm or more but not more than 36,60 mm,- sealing diameter 34,0 mm or more but not more than 41,0 mm, without lead angle,-spline with 21 teeth or more but not more than 35,-bearing seat diameter of 25,0 mm or more but not more than 30,0 mm, with or without oil grooves
8708.50.99.35
Outboard joint assembly for transmitting a torque from engine and transmission to wheels of motor vehicles, consisting of:-an inner race with 6 ball tracks for running with the bearing balls with a diameter 15,0 mm or more but not more than 20,0 mm,-an outer race with 6 ball tracks for running with 6 bearing balls, made of steel with carbon content of 0,45 % or more but not more than 0,58 %, with thread and with a spline with 26 teeth or more but not more than 38,-a spherical cage keeping bearing balls in the ball tracks of outer race and inner race in proper angular position, made of material suitable for carburizing with carbon content of 0,14 % or more but not more than 0,25 %, and-with a grease compartment,capable of working at constant speed at variable articulation angle not higher than 50 degrees
8708.50.99.40
Double flange bearing of 3rd generation, for motor vehicles,- with double-row ball bearing,- whether or not with impulse (encoder) ring,- whether or not with antilock brake system (abs) sensor,- whether or not with mounted screws,for use in the manufacture of goods of chapter 87
8708.50.99.45
Ball-type outboard constant velocity joint housing for transmitting a torque from the engine and transmission to the wheels of motor vehicles, in a form of an outer race, with: -6 ball tracks or more but not more than 8, with -a thread, -an external involute spline with 21 or more but not more than 38 teeth, -for running with bearing balls made of steel with a carbon content of 0,48 % or more but not more than 0,57 %, -forged, turned, milled and hardened
8708.50.99.50
Inboard constant velocity joint tripod housing, with: -an outer diameter of 67,0 mm or more but not more than 99,0 mm, -3 cold calibrated roller tracks with a diameter of 29,95 mm or more but not more than 49,2 mm, -an external spline with 21 teeth or more but not more than 41, -forged, turned, rolled and hardened
8708.50.99.55
Outboard constant velocity joint inner race, part of the vehicle's drive system, with: -6 or more but not more than 8 ball tracks, suitable for bearing balls with a diameter of 12,0 mm or more but not more than 24,0 mm, -forged, turned, milled, broached and hardened
8708.50.99.60
Inboard constant velocity joint tripod spider, part of the vehicle's drive system, with: -3 trunnions with a diameter of 17,128 mm or more but not more than 25,468 mm, -forged, turned, broached and hardened
8708.50.99.90
Other
8708.70
Road wheels and parts and accessories thereof:
8708.70.10
For the industrial assembly of:pedestrian-controlled tractors of subheading 8701 10;vehicles of heading 8703;vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm3 or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm3;vehicles of heading 8705:
8708.70.10.A
Wheels of aluminium, whether or not with their accessories and whether or not fitted with tyres:
8708.70.10.15
Fitted with pneumatic tyres, new or retreaded, of rubber, of a kind used for buses or lorries, with a load index exceeding 121
8708.70.10.50
Other
8708.70.10.B
Other:
8708.70.10.B.A
Road wheels of steel, whether or not with their accessories and whether or not fitted with tyres, for the industrial assembly ofvehicles of heading 8703;vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm³ or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm³;vehicles of heading 8705:
8708.70.10.80
Fitted with pneumatic tyres, new or retreaded, of rubber, of a kind used for buses or lorries, with a load index exceeding 121
8708.70.10.85
Other
8708.70.10.B.B
Other:
8708.70.10.92
Fitted with pneumatic tyres, new or retreaded, of rubber, of a kind used for buses or lorries, with a load index exceeding 121
8708.70.10.95
Other
8708.70.A
Other:
8708.70.50
Wheels of aluminium; parts and accessories of wheels, of aluminium:
8708.70.50.A
Wheels of aluminium, whether or not with their accessories and whether or not fitted with tyres:
8708.70.50.15
Fitted with pneumatic tyres, new or retreaded, of rubber, of a kind used for buses or lorries, with a load index exceeding 121
8708.70.50.50
Other
8708.70.50.B
Other:
8708.70.50.80
Fitted with pneumatic tyres, new or retreaded, of rubber, of a kind used for buses or lorries, with a load index exceeding 121
8708.70.50.85
Other
8708.70.91
Wheel centres in star form, cast in one piece, of iron or steel:
8708.70.91.15
Fitted with pneumatic tyres, new or retreaded, of rubber, of a kind used for buses or lorries, with a load index exceeding 121
8708.70.91.90
Other
8708.70.99
Other:
8708.70.99.A
Fitted with pneumatic tyres, new or retreaded, of rubber, of a kind used for buses or lorries, with a load index exceeding 121:
8708.70.99.20
Road wheels of steel, whether or not with their accessories
8708.70.99.30
Other
8708.70.99.B
Other:
8708.70.99.80
Road wheels of steel, whether or not with their accessories and whether or not fitted with tyres, designed for- road tractors,- motor vehicles for the transport of persons and/or the transport of goods,- special purpose motor vehicles (for example, fire fighting vehicles, spraying lorries);excluding:- wheels for road quad bikes,- wheels for motor vehicles specifically designed for uses other than on public roads (for example, wheels for agricultural tractors or forestry tractors, for forklifts, for pushback tractors, for dumpers designed for off-highway use)
8708.70.99.85
Other
8708.80
Suspension systems and parts thereof (including shock-absorbers):
8708.80.20
For the industrial assembly of:vehicles of heading 8703;vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm3 or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm3;vehicles of heading 8705:
8708.80.20.10
Upper strut insulator containing - a metal holder with three mounting screws, and - a rubber bumpfor use in the manufacture of goods of chapter 87
8708.80.20.90
Other
8708.80.A
Other:
8708.80.35
Suspension shock-absorbers:
8708.80.35.10
Upper strut insulator containing - a metal holder with three mounting screws, and - a rubber bumpfor use in the manufacture of goods of chapter 87
8708.80.35.90
Other
8708.80.55.00
Anti roll bars; other torsion bars
8708.80.A.A
Other:
8708.80.91.00
Of closed-die forged steel
8708.80.99
Other:
8708.80.99.30
Surface-hardened, steel piston rod for a hydraulic or hydropneumatic shock absorber of motor vehicles: -with a chrome coating, -of a diameter of 11 mm or more, but not more than 28 mm, -of a length of 80 mm or more, but not more than 600 mm,with a threaded end or a mandrel for resistance welding
8708.80.99.90
Other
8708.B
Other parts and accessories:
8708.91
Radiators and parts thereof:
8708.91.20
For the industrial assembly of:pedestrian-controlled tractors of subheading 8701 10;vehicles of heading 8703;vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm3 or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm3;vehicles of heading 8705:
8708.91.20.20
Aluminium cooler using compressed air with a ribbed design of a kind used in the manufacture of goods of chapter 87
8708.91.20.30
Aluminium alloy inlet or outlet air tank of heat exchangers for car cooling systems, manufactured to standard en ac 42100 or en ac 43000 t6 with - an insulating area flatness of not more than 0,1 mm, - a permissible particle quantity of 0,3 mg per tank, - a distance between pores of 2 mm or more, - pore sizes of not more than 0,4 mm, and - not more than 3 pores larger than 0,2mm-with a weight of 0,2kg or more but not more than 3kg
8708.91.20.90
Other
8708.91.A
Other:
8708.91.35
Radiators:
8708.91.35.10
Aluminium cooler using compressed air with a ribbed design of a kind used in the manufacture of goods of chapter 87
8708.91.35.20
Turbocharger cooling duct containing: -an aluminum alloy duct with at least one metal holder and at least two mounting holes, -a rubber pipe with clips, -a stainless steel flange highly resistant to corrosion [sus430jil],for use in the manufacture of compression ignition engines of motor vehicles
8708.91.35.30
Two-circuit aluminum heat exchanger for automatic transmission of passenger cars: -of the stack-plate type, -with two pairs of inlet and outlet, each for the coolant/water circuit and the transmission oil circuit, -with at least two mounting holes, -whether or not with the connection hoses,for use in the manufacture of goods of chapter 87
8708.91.35.90
Other
8708.91.A.A
Parts:
8708.91.91.00
Of closed-die forged steel
8708.91.99
Other:
8708.91.99.30
Aluminium alloy inlet or outlet air tank of heat exchangers for car cooling systems, manufactured to standard en ac 42100 or en ac 43000 t6 with - an insulating area flatness of not more than 0,1 mm, - a permissible particle quantity of 0,3 mg per tank, - a distance between pores of 2 mm or more, - pore sizes of not more than 0,4 mm, and - not more than 3 pores larger than 0,2mm-with a weight of 0,2kg or more but not more than 3kg
8708.91.99.90
Other
8708.92
Silencers (mufflers) and exhaust pipes; parts thereof:
8708.92.20.00
For the industrial assembly of:pedestrian-controlled tractors of subheading 8701 10;vehicles of heading 8703;vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm3 or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm3;vehicles of heading 8705
8708.92.A
Other:
8708.92.35.00
Silencers (mufflers) and exhaust pipes
8708.92.A.A
Parts:
8708.92.91.00
Of closed-die forged steel
8708.92.99.00
Other
8708.93
Clutches and parts thereof:
8708.93.10.00
For the industrial assembly of:pedestrian-controlled tractors of subheading 8701 10;vehicles of heading 8703;vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm3 or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm3;vehicles of heading 8705
8708.93.90.00
Other
8708.94
Steering wheels, steering columns and steering boxes; parts thereof:
8708.94.20.00
For the industrial assembly of:vehicles of heading 8703;vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm3 or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm3;vehicles of heading 8705
8708.94.A
Other:
8708.94.35.00
Steering wheels, steering columns and steering boxes
8708.94.A.A
Parts:
8708.94.91.00
Of closed-die forged steel
8708.94.99.00
Other
8708.95
Safety airbags with inflator system; parts thereof:
8708.95.10
For the industrial assembly of:pedestrian-controlled tractors of subheading 8701 10;vehicles of heading 8703;vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm3 or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm3;vehicles of heading 8705:
8708.95.10.20
Inflatable safety cushion of high strength polyamide fibre: - sewn, - folded, - with three-dimensionally applied silicone bonding for air bag cavity forming and load-regulated air bag sealing - suitable for cool inflator technology
8708.95.10.30
Inflatable sewn safety cushion of high strength polyamide fibre: -folded into three-dimensional packing form, fixed by thermal forming, dedicated fixation seams, fabric cover or plastic staples, or -flat safety cushion with or without thermal folding
8708.95.10.90
Other
8708.95.A
Other:
8708.95.91.00
Of closed-die forged steel
8708.95.99
Other:
8708.95.99.30
Inflatable safety cushion of high strength polyamide fibre: - sewn, - folded, - with three-dimensionally applied silicone bonding for air bag cavity forming and load-regulated air bag sealing - suitable for cool inflator technology
8708.95.99.40
Inflatable sewn safety cushion of high strength polyamide fibre: -folded into three-dimensional packing form, fixed by thermal forming, dedicated fixation seams, fabric cover or plastic staples, or -flat safety cushion with or without thermal folding
8708.95.99.50
Airbag inflator containing both pyrotechnics and cold gas as propellant for safety airbags of vehicles, in each individual consignment of 1 000 pieces or more
8708.95.99.90
Other
8708.99
Other:
8708.99.10
For the industrial assembly of:pedestrian-controlled tractors of subheading 8701 10;vehicles of heading 8703;vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm3 or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm3;vehicles of heading 8705:
8708.99.10.55
Silicone or plastic keyboards, comprising: -parts of common metal, and -whether or not comprising parts of plastic, -epoxy resin reinforced with fiberglass or wood, -whether or not printed or surface-treated, -with or without electrical conductors -with or without a membrane bonded to the keyboard, -with or without mono or multilayer protective film
8708.99.10.60
Aluminium engine bracket, with dimensions of: -height of more than 10 mm but not more than 200 mm, -width of more than 10 mm but not more than 250 mm, -length of more than 10 mm but not more than 200 mm,equipped with at least two fixing holes, made of aluminium alloys enac-46100 or enac-42100 (based on the norm en:1706) with following characteristics: -internal porosity not more than 1 mm, -outer porosity not more than 2 mm, -rockwell hardness hrb 10 or more,of a kind used in the production of suspensions systems for engines in motor vehicles
8708.99.10.90
Other
8708.99.A
Other:
8708.99.93.00
Of closed-die forged steel
8708.99.97
Other:
8708.99.97.22
Silicone or plastic keyboards, comprising: -parts of common metal, and -whether or not comprising parts of plastic, -epoxy resin reinforced with fiberglass or wood, -whether or not printed or surface-treated, -with or without electrical conductors -with or without a membrane bonded to the keyboard, -with or without mono or multilayer protective film
8708.99.97.28
A set of type 4 h2 cylinders, in accordance with the ec 79 standard, consisting of two to eight cylinders on aluminum frames: -cylinders made of high density polyethylene (hdpe) composite reinforced with a braid of glass and carbon fibers in epoxy resin, -with an operating pressure of not less than 35 mpa, -with a durability declared by the manufacturer of not less than 20 years, -with a cylinder capacity of 180 liters or more but not more than 375 liters, -equipped with a set of solenoid, manual and safety prd valves, -with a total width of 1 800 mm or more but not more than 2 300 mm, -with a total height of 400 mm or more but not more than 500 mm, -with a total length of 1 200 mm or more but not more than 3 600 mm
8708.99.97.38
A set of compressed natural gas (cng) cylinders type cng-4, in accordance with the ece r110 standard, consisting of four or five cylinders on aluminum frames: -made of high density polyethylene (hdpe) composite reinforced with a braid of glass and carbon fibers in epoxy resin, -with an operating pressure of not less than 20 mpa, -with a shelf life declared by the manufacturer of not less than 20 years, -with a cylinder capacity of 315 liters or more but not more than 375 liters, -equipped with a set of solenoid, manual and safety prd valves, -with a total width of 2 200 mm or more but not more than 2 300 mm, -with a total height of 450 mm or more but not more than 460 mm, -with a total length of 3500 mm or more but not more than 3 600 mm
8708.99.97.50
Aluminium engine bracket, with dimensions of: -height of more than 10 mm but not more than 200 mm, -width of more than 10 mm but not more than 250 mm, -length of more than 10 mm but not more than 200 mm,equipped with at least two fixing holes, made of aluminium alloys enac-46100 or enac-42100 (based on the norm en:1706) with following characteristics: -internal porosity not more than 1 mm, -outer porosity not more than 2 mm, -rockwell hardness hrb 10 or more,of a kind used in the production of suspensions systems for engines in motor vehicles
8708.99.97.75
Aluminium alloy support bracket, with mounting holes, whether or not with fixation nuts, for indirect connection of the gearbox to the car body for use in the manufacture of goods of chapter 87
8708.99.97.90
Other
8709
Works trucks, self-propelled, not fitted with lifting or handling equipment, of the type used in factories, warehouses, dock areas or airports for short distance transport of goods; tractors of the type used on railway station platforms; parts of the foregoing vehicles:
8709.A
Vehicles:
8709.11
Electrical:
8709.11.10.00
Specially designed for the transport of highly radioactive materials
8709.11.90.00
Other
8709.19
Other:
8709.19.10.00
Specially designed for the transport of highly radioactive materials
8709.19.90.00
Other
8709.90.00.00
Parts
8710.00.00.00
Tanks and other armoured fighting vehicles, motorised, whether or not fitted with weapons, and parts of such vehicles
8711
Motorcycles (including mopeds) and cycles fitted with an auxiliary motor, with or without side-cars; side-cars:
8711.10.00.00
With internal combustion piston engine of a cylinder capacity not exceeding 50 cm3
8711.20
With internal combustion piston engine of a cylinder capacity exceeding 50 cm3 but not exceeding 250 cm3:
8711.20.10.00
Scooters
8711.20.A
Other, of a cylinder capacity:
8711.20.92.00
Exceeding 50 cm3 but not exceeding 125 cm3
8711.20.98.00
Exceeding 125 cm3 but not exceeding 250 cm3
8711.30
With internal combustion piston engine of a cylinder capacity exceeding 250 cm3 but not exceeding 500 cm3:
8711.30.10.00
Of a cylinder capacity exceeding 250 cm3 but not exceeding 380 cm3
8711.30.90.00
Of a cylinder capacity exceeding 380 cm3 but not exceeding 500 cm3
8711.40.00.00
With internal combustion piston engine of a cylinder capacity exceeding 500 cm3 but not exceeding 800 cm3
8711.50.00.00
With internal combustion piston engine of a cylinder capacity exceeding 800 cm3
8711.60
With electric motor for propulsion:
8711.60.10.00
Bicycles, tricycles and quadricycles, with pedal assistance, with an auxiliary electric motor with a continuous rated power not exceeding 250 watts
8711.60.90
Other:
8711.60.90.10
Cycles, with pedal assistance, with an auxiliary electric motor
8711.60.90.90
Other
8711.90.00.00
Other
8712
Bicycles and other cycles (including delivery tricycles), not motorised:
8712.00.30
Bicycles with ball bearings:
8712.00.30.10
Consigned from indonesia, malaysia, sri lanka or tunisia
8712.00.30.20
Consigned from cambodia, pakistan or the philippines
8712.00.30.90
Other
8712.00.70
Other:
8712.00.70.10
Unicycles
8712.00.70.A
Other:
8712.00.70.91
Consigned from indonesia, malaysia, sri lanka or tunisia
8712.00.70.92
Consigned from cambodia, pakistan or the philippines
8712.00.70.99
Other
8713
Carriages for disabled persons, whether or not motorised or otherwise mechanically propelled:
8713.10.00.00
Not mechanically propelled
8713.90.00.00
Other
8714
Parts and accessories of vehicles of headings 8711 to 8713:
8714.10
Of motorcycles (including mopeds):
8714.10.10.00
Brakes and parts thereof
8714.10.20.00
Gear boxes and parts thereof
8714.10.30.00
Road wheels and parts and accessories thereof
8714.10.40.00
Silencers (mufflers) and exhaust pipes; parts thereof
8714.10.50.00
Clutches and parts thereof
8714.10.90
Other:
8714.10.90.10
Motorcycle fork rod inner tubes:- of sae1541 carbon steel,- with a hard chromium layer of 20μm (+ 15μm/ – 5μm),- having a wall thickness of 1,3mm or more, but not more than 1,6mm,- having an elongation at break of 15%,- perforated
8714.10.90.70
Motor bikes radiators in consignment of 100 pieces or more
8714.10.90.90
Other
8714.20.00.00
Of carriages for disabled persons
8714.A
Other:
8714.91
Frames and forks, and parts thereof:
8714.91.10
Frames:
8714.91.10.A
Painted, anodised, polished and/or lacquered:
8714.91.10.A.A
Originating in or consigned from china:- in quantities below 300 units per month on average for a period not exceeding 12 months, or to be transferred to a party in quantities below 300 units per month on average for a period not exceeding 12 months; or- to be transferred to another holder of an end-use authorisation or to exempted parties:
8714.91.10.21
Constructed from carbon fibres and artificial resin, for use in the manufacture of bicycles (including e-bikes)
8714.91.10.25
Frame, constructed from aluminium or aluminium and carbon fibres and artificial resin, for the use in the manufacture of bicycles (including electric bicycles)
8714.91.10.29
Other
8714.91.10.A.B
Other:
8714.91.10.31
Constructed from carbon fibres and artificial resin, for use in the manufacture of bicycles (including e-bikes)
8714.91.10.35
Frame, constructed from aluminium or aluminium and carbon fibres and artificial resin, for the use in the manufacture of bicycles (including electric bicycles)
8714.91.10.39
Other
8714.91.10.B
Other:
8714.91.10.75
Constructed from carbon fibres and artificial resin, for use in the manufacture of bicycles (including e-bikes)
8714.91.10.77
Frame, constructed from aluminium or aluminium and carbon fibres and artificial resin, for the use in the manufacture of bicycles (including electric bicycles)
8714.91.10.89
Other
8714.91.30
Front forks:
8714.91.30.A
Painted, anodised, polished and/or lacquered:
8714.91.30.A.A
Originating in or consigned from china:- in quantities below 300 units per month on average for a period not exceeding 12 months, or to be transferred to a party in quantities below 300 units per month on average for a period not exceeding 12 months; or- to be transferred to another holder of an end-use authorisation or to exempted parties:
8714.91.30.25
Front forks, except rigid (non-telescopic) front forks made entirely of steel, for use in the manufacture of bicycles (including electric bicycles)
8714.91.30.29
Other
8714.91.30.A.B
Other:
8714.91.30.35
Front forks, except rigid (non-telescopic) front forks made entirely of steel, for use in the manufacture of bicycles (including electric bicycles)
8714.91.30.39
Other
8714.91.30.B
Other:
8714.91.30.72
Front forks, except rigid (non-telescopic) front forks made entirely of steel, for use in the manufacture of bicycles (including electric bicycles)
8714.91.30.89
Other
8714.91.90.00
Parts
8714.92
Wheel rims and spokes:
8714.92.10.00
Rims
8714.92.90.00
Spokes
8714.93
Hubs, other than coaster braking hubs and hub brakes, and free-wheel sprocket-wheels:
8714.93.A
Free-wheel sprocket-wheels:
8714.93.00.11
Originating in or consigned from china:- in quantities below 300 units per month on average for a period not exceeding 12 months, or to be transferred to a party in quantities below 300 units per month on average for a period not exceeding 12 months; or- to be transferred to another holder of an end-use authorisation or to exempted parties
8714.93.00.19
Other
8714.93.00.90
Other
8714.94
Brakes, including coaster braking hubs and hub brakes, and parts thereof:
8714.94.20
Brakes:
8714.94.20.05
Coaster braking hubs and hub brakes
8714.94.20.A
Other brakes:
8714.94.20.91
Originating in or consigned from china:- in quantities below 300 units per month on average for a period not exceeding 12 months, or to be transferred to a party in quantities below 300 units per month on average for a period not exceeding 12 months; or- to be transferred to another holder of an end-use authorisation or to exempted parties
8714.94.20.99
Other
8714.94.90
Parts:
8714.94.90.A
Brake levers:
8714.94.90.11
Originating in or consigned from china:- in quantities below 300 units per month on average for a period not exceeding 12 months, or to be transferred to a party in quantities below 300 units per month on average for a period not exceeding 12 months; or- to be transferred to another holder of an end-use authorisation or to exempted parties
8714.94.90.19
Other
8714.94.90.90
Other
8714.95.00.00
Saddles
8714.96
Pedals and crank-gear, and parts thereof:
8714.96.10
Pedals:
8714.96.10.10
Pedals, for use in the manufacture of bicycles (including electric bicycles)
8714.96.10.90
Other
8714.96.30
Crank-gear:
8714.96.30.10
Originating in or consigned from china:- in quantities below 300 units per month on average for a period not exceeding 12 months, or to be transferred to a party in quantities below 300 units per month on average for a period not exceeding 12 months; or- to be transferred to another holder of an end-use authorisation or to exempted parties
8714.96.30.90
Other
8714.96.90.00
Parts
8714.99
Other:
8714.99.10
Handlebars:
8714.99.10.A
Originating in or consigned from china:- in quantities below 300 units per month on average for a period not exceeding 12 months, or to be transferred to a party in quantities below 300 units per month on average for a period not exceeding 12 months; or- to be transferred to another holder of an end-use authorisation or to exempted parties:
8714.99.10.20
Bicycle handlebars,- with or without integrated stem,- either made out of carbon fibres and synthetic resin or made of aluminium,for use in the manufacture of bicycles (including electric bicycles)
8714.99.10.29
Other
8714.99.10.B
Other:
8714.99.10.89
Bicycle handlebars,- with or without integrated stem,- either made out of carbon fibres and synthetic resin or made of aluminium,for use in the manufacture of bicycles (including electric bicycles)
8714.99.10.99
Other
8714.99.30.00
Luggage carriers
8714.99.50
Derailleur gears:
8714.99.50.A
Originating in or consigned from china:- in quantities below 300 units per month on average for a period not exceeding 12 months, or to be transferred to a party in quantities below 300 units per month on average for a period not exceeding 12 months; or- to be transferred to another holder of an end-use authorisation or to exempted parties:
8714.99.50.11
Derailleur gears, consisting of: -rear derailleur and mounting articles, -with or without front derailleur,for use in the manufacture of bicycles (including electric bicycles)
8714.99.50.19
Other
8714.99.50.B
Other:
8714.99.50.91
Derailleur gears, consisting of: -rear derailleur and mounting articles, -with or without front derailleur,for use in the manufacture of bicycles (including electric bicycles)
8714.99.50.99
Other
8714.99.90
Other; parts:
8714.99.90.A
Complete wheels with or without tubes, tyres and sprockets:
8714.99.90.11
Originating in or consigned from china:- in quantities below 300 units per month on average for a period not exceeding 12 months, or to be transferred to a party in quantities below 300 units per month on average for a period not exceeding 12 months; or- to be transferred to another holder of an end-use authorisation or to exempted parties
8714.99.90.19
Other
8714.99.90.30
Seat posts, for use in the manufacture of bicycles (including electric bicycles)
8714.99.90.40
Stem for bicycle handlebars, for use in the manufacture of bicycles (including electric bicycles)
8714.99.90.50
Rear air shock absorber in form of a pneumatic spring element with oil damper for use in the manufacture of bicycles, including electrical bicycles
8714.99.90.89
Other
8715
Baby carriages and parts thereof:
8715.00.10.00
Baby carriages
8715.00.90.00
Parts
8716
Trailers and semi-trailers; other vehicles, not mechanically propelled; parts thereof:
8716.10
Trailers and semi-trailers of the caravan type, for housing or camping:
8716.10.92.00
Of a weight not exceeding 1 600 kg
8716.10.98.00
Of a weight exceeding 1 600 kg
8716.20.00.00
Self-loading or self-unloading trailers and semi-trailers for agricultural purposes
8716.A
Other trailers and semi-trailers for the transport of goods:
8716.31.00.00
Tanker trailers and tanker semi-trailers
8716.39
Other:
8716.39.10.00
Specially designed for the transport of highly radioactive materials
8716.39.A
Other:
8716.39.A.A
New:
8716.39.30.00
Semi-trailers
8716.39.50.00
Other
8716.39.80.00
Used
8716.40.00.00
Other trailers and semi-trailers
8716.80.00.00
Other vehicles
8716.90
Parts:
8716.90.10.00
Chassis
8716.90.30.00
Bodies
8716.90.50.00
Axles
8716.90.90
Other parts:
8716.90.90.A
Aluminium road wheels of vehicles of cn heading 8716, whether or not with their accessories and whether or not fitted with tyres:
8716.90.90.15
Fitted with pneumatic tyres, new or retreaded, of rubber, of a kind used for buses or lorries, with a load index exceeding 121
8716.90.90.50
Other
8716.90.90.B
Other:
8716.90.90.B.A
Fitted with pneumatic tyres, new or retreaded, of rubber, of a kind used for buses or lorries, with a load index exceeding 121:
8716.90.90.95
Road wheels of steel, whether or not with their accessories
8716.90.90.96
Other
8716.90.90.B.B
Other:
8716.90.90.97
Road wheels of steel, designed for trailers or semi-trailers, not mechanically propelled, of road tractors, whether or not with their accessories and whether or not fitted with tyres
8716.90.90.98
Other

Need help to the find appropriate HS Code ?
 
 or