HS-codes - 72: IRON AND STEEL

Gietijzer en spiegelijzer, in gietelingen, in blokken of in andere primaire vormen:

Containing by weight not less than 0.4% of manganese

Pig iron ingots with a length of not more than 350 mm, a width of not more than 150 mm, a height of not more than 150 mm

Containing by weight more than 1% of silicon

Pig iron ingots with a length of not more than 350 mm, a width of not more than 150 mm, a height of not more than 150 mm, containing by weight not more than 1% of silicon

Containing by weight less than 0.1% of manganese

Gelegeerd gietijzer; spiegelijzer:

Andere

Non-alloy pig iron containing by weight 0.5% or less of phosphorus

Containing by weight 1% or less of silicon

Andere

Containing by weight not less than 0.1% but less than 0.4% of manganese

Andere

Non-alloy pig iron containing by weight more than 0.5% of phosphorus

Alloy pig iron containing by weight not less than 0.3% but not more than 1% of titanium and not less than 0.5% but not more than 1% of vanadium

Ferrolegeringen:

Containing by weight more than 2% of carbon

Andere

Ferrosilicium:

Andere:

Andere

Ferrochroom:

Containing by weight more than 4% but not more than 6% of carbon

Andere:

Containing by weight more than 30% but not more than 90% of chromium (super-refined ferrochromium)

Containing by weight more than 0.05% but not more than 0.5% of carbon

Containing by weight not more than 0.1% of carbon and more than 30% but not more than 90% of chromium (super-refined ferrochromium)

Andere

Ferrosilicochroom

Ferromolybdeen

Andere:

Ferrovanadium

Andere:

Ferro-silico-magnesium

Ferro-dysprosium, containing by weight:- 78% or more of dysprosium and- 18% or more but no more than 22% of iron

Andere

Ferroproducten verkregen door het rechtstreeks reduceren van ijzererts

Resten en afval, van gietijzer, van ijzer of van staal (schroot); afvalingots van ijzer of van staal:

Resten en afval, van gelegeerd staal:

Containing by weight 8% or more of nickel

Andere

Scrap

Andere:

Andere

Scrap

Andere resten en afval:

Turnings, shavings, chips, milling waste, sawdust and filings

Andere

In bundles

Andere

Scrap

Andere:

Scrap

Andere:

Scrap

Andere:

Andere

Korrels en poeder, van gietijzer, van spiegelijzer, van ijzer of van staal:

Poeder:

Andere

Ingots

Ijzer (ander dan bedoeld bij post 7203) en niet-gelegeerd staal, in ingots of in andere primaire vormen:

Andere

Containing by weight less than 0.25% of carbon

Rolled or obtained by continuous casting

Andere:

Of a thickness exceeding 130 mm

Andere, met een rechthoekige dwarsdoorsnede:

Gesmeed

Of circular or polygonal cross-section

Gesmeed

Blanks for angles, shapes and sections, rolled or obtained by continuous casting

Containing by weight 0.25% or more of carbon

Rolled or obtained by continuous casting

Other, containing by weight

0.6% or more of carbon

Andere, met een rechthoekige dwarsdoorsnede:

Gesmeed

Rolled or obtained by continuous casting

Andere:

Andere

Opgerold, enkel warm gewalst, met in reliëf gewalste motieven

Met een dikte van 4,75 mm of meer

Met een dikte van minder dan 3 mm

Met een dikte van meer dan 10 mm

Intended for re-rolling

Met een dikte van 3 of meer doch minder dan 4,75 mm:

Andere

Intended for re-rolling

Niet opgerold, enkel warm gewalst, met in reliëf gewalste motieven:

Of a thickness of less than 2 mm

Met een dikte van meer dan 10 mm:

Of non-alloy steel, excluding tool steel

Of a thickness exceeding 10 mm but not exceeding 15 mm, of a width of

Of non-alloy steel, excluding tool steel

Less than 2 050 mm

Andere

Rolled on four faces or in a closed box pass, of a width not exceeding 1 250 mm

2 050 mm or more

Andere

Met een dikte van 3 of meer doch minder dan 4,75 mm:

Andere

Andere:

Of non-alloy steel, excluding tool steel, of a thickness exceeding 10 mm or of a thickness of 4.75 mm or more but not exceeding 10 mm and of a width of 2 050 mm or more

Andere:

Of non-alloy steel, excluding tool steel, of a thickness exceeding 10 mm or of a thickness of 4.75 mm or more but not exceeding 10 mm and of a width of 2 050 mm or more

Gewalste platte producten, van ijzer of van niet-gelegeerd staal, met een breedte van 600 mm of meer, koud gewalst, niet geplateerd noch bekleed:

Met een dikte van 3 mm of meer:

Andere

'electrical'

Met een dikte van 0,5 of meer doch niet meer dan 1 mm:

Andere

'electrical'

Of a thickness of 0.35 mm or more but less than 0.5 mm

Annealed (known as 'black plates')

Niet opgerold, niet verder bewerkt dan koud gewalst (koud gereduceerd):

'electrical'

Met een dikte van meer dan 1 doch minder dan 3 mm:

Andere

'electrical'

Met een dikte van minder dan 0,5 mm:

Andere

Perforated

Not further worked than surface-treated or simply cut into shapes other than rectangular (including square)

Gewalste platte producten, van ijzer of van niet-gelegeerd staal, met een breedte van 600 mm of meer, geplateerd of bekleed:

Met een dikte van 0,5 mm of meer:

Andere

Tinplate

Andere

Not further worked than surface-treated or simply cut into shapes other than rectangular (including square)

Verlood:

Andere

Not further worked than surface-treated or simply cut into shapes other than rectangular (including square)

Op andere wijze verzinkt:

Aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips

Andere

Aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips

Andere

Not further worked than surface-treated or simply cut into shapes other than rectangular (including square)

Bekleed met aluminium:

Aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips

Andere

Aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips

Andere

Tinplate, varnished; products, plated or coated with chromium oxides or with chromium and chromium oxides, varnished

Andere

Not further worked than surface-treated or simply cut into shapes other than rectangular (including square)

Andere:

Andere

Of non-alloy steel, painted, varnished or coated with plastics on at least one side, excluding so-called 'sandwich panels' of a kind used for building applications and consisting of two outer metal sheets with a stabilising core of insulation material sandwiched between them, and excluding those products with a final coating of zinc-dust (a zinc-rich paint, containing by weight 70% or more of zinc) and excluding products with a substrate with a metallic coating of chromium or tin

Coated or plated with tin

Andere:

Tinned and printed

Andere

Coated or plated with tin, whether or not coated with a plastic material and/or varnished

Not further worked than surface-treated, including cladding, or simply cut into shapes other than rectangular (including square)

Andere

Enkel warm gewalst:

Of a width not exceeding 350 mm and of a thickness of 50 mm or more

Andere, met een dikte van 4,75 mm of meer:

Of a width not exceeding 500 mm

Andere

Of a width exceeding 500 mm

Of a width not exceeding 350 mm and of a thickness of 50 mm or more

Niet verder bewerkt dan koud gewalst (koud gereduceerd):

'electrical'

Of a width not exceeding 500 mm

Of a thickness of 0.35 mm or more

Of a width not exceeding 500 mm

Andere

Of a width exceeding 500 mm

Andere

In coils intended for the manufacture of tinplate

Andere

In coils, annealed (known as 'black plates')

Andere:

'electrical'

Of a width not exceeding 500 mm

Andere

Perforated

Of a width exceeding 500 mm

Andere

Gewalste platte producten, van ijzer of van niet-gelegeerd staal, met een breedte van minder dan 600 mm, geplateerd of bekleed:

Tinplate, not further worked than surface-treated

Of a width exceeding 500 mm

Andere

Elektrolytisch verzinkt:

Not further worked than surface-treated

Of a width not exceeding 500 mm

Aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips

Andere

Tinplate, not further worked than varnished; products, plated or coated with chromium oxides or with chromium and chromium oxides, varnished

Andere:

Not further worked than surface-treated

Of a width not exceeding 500 mm

Of a width exceeding 500 mm

Of non-alloy steel, painted, varnished or coated with plastics on at least one side, excluding products with a final coating of zinc-dust (a zinc-rich paint, containing by weight 70% or more of zinc) and excluding products with a substrate with a metallic coating of chromium or tin

Coated or plated with tin

Andere:

Andere:

Andere

Of non-alloy steel, painted, varnished or coated with plastics on at least one side, excluding so-called 'sandwich panels' of a kind used for building applications and consisting of two outer metal sheets with a stabilising core of insulation material sandwiched between them, and excluding those products with a final coating of zinc-dust (a zinc-rich paint, containing by weight 70% or more of zinc)

Andere

Coated or plated with tin

Op andere wijze bekleed:

Of a width exceeding 500 mm

Andere

Plated or coated with chromium or nickel

Not further worked than surface-treated

Of a width not exceeding 500 mm

Of a width exceeding 500 mm

Andere

Bekleed met aluminium:

Aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips

Andere

Aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips

Andere

Of a width exceeding 500 mm

Andere:

Plated or coated by hot dip galvanisation with magnesium or magnesium-zinc alloys, whether or not alloyed with silicon; chemically passivated; with or without any additional surface treatment such as oiling or sealing; containing by weight: not more than 0.5% of carbon, not more than 1.1% of aluminium, not more than 0.12% of niobium, not more than 0.17% of titanium and not more than 0.15% of vanadium; presented in coils, cut-to-length sheets and narrow strips

Of a width not exceeding 500 mm

Andere

Walsdraad van ijzer of van niet-gelegeerd staal:

Andere, van automatenstaal

Met een cirkelvormige dwarsdoorsnede met een diameter van minder dan 14 mm:

Of a type used for tyre cord

Containing by weight 0.06% or less of carbon

Containing by weight 0.25% or more but not more than 0.75% of carbon

Andere:

Containing by weight 0.25% or more of carbon

Gesmeed:

Andere

High fatigue performance concrete reinforcing bars and rods

Concrete reinforcement bars and rods excluding long products, such as round bars

Andere, van automatenstaal:

Andere

Met een rechthoekige dwarsdoorsnede:

Concrete reinforcement bars and rods, containing indentations, ribs, grooves or other deformations produced during the rolling process; excluding high fatigue performance concrete reinforcement bars and rods, and excluding other long products, such as round bars

Containing by weight 0.25% or more of carbon

Andere

Containing by weight less than 0.25% of carbon

Bars and rods, containing indentations, ribs, grooves or other deformations produced during the rolling process; excluding high fatigue performance bars and rods, and excluding other long products, such as round bars

Other, of circular cross-section measuring in diameter

Less than 80 mm

Containing by weight 0.25% or more of carbon

80 mm or more

Andere:

Andere

Van automatenstaal, niet verder bewerkt dan door koud bewerken of koud nabewerken

Containing by weight less than 0.25% of carbon

Andere

Andere:

Andere

U-, i- of h-profielen, enkel warm gewalst, warm getrokken of warm geperst, met een lijfhoogte van minder dan 80 mm

L-profielen

U-, i- of h-profielen, enkel warm gewalst, warm getrokken of warm geperst, met een lijfhoogte van 80 mm of meer:

Of a height of 80 mm or more but not exceeding 220 mm

I-profielen:

With parallel flange faces

Of a height exceeding 220 mm

Andere

Of a height of 80 mm or more but not exceeding 180 mm

L- of t-profielen, enkel warm gewalst, warm getrokken of warm geperst, met een lijfhoogte van 80 mm of meer:

T-profielen

With a cross-section which is capable of being enclosed in a square the side of which is 80 mm

Bulb flats

Andere

Profielen, niet verder bewerkt dan door koud bewerken of koud nabewerken:

C, l, u, z, omega or open-ended sections

Andere

Door koud bewerken of door koud nabewerken verkregen uit gewalste platte producten:

Andere

Hot-rolled, hot-drawn or extruded, not further worked than clad

Draad van ijzer of van niet-gelegeerd staal:

Containing by weight less than 0.25% of carbon

With a maximum cross-sectional dimension of 0.8 mm or more

Andere

Containing by weight 0.6% or more of carbon

Andere

Containing by weight less than 0.25% of carbon

With a maximum cross-sectional dimension of 0.8 mm or more

Containing by weight 0.6% or more of carbon

Andere

Containing by weight less than 0.25% of carbon

Andere

Containing by weight 0.6% or more of carbon

Containing by weight less than 0.25% of carbon

Containing by weight 0.6% or more of carbon

Ingots en andere primaire vormen

Met een rechthoekige dwarsdoorsnede:

Containing by weight less than 2.5% of nickel

Of square cross-section

Gesmeed

Rolled or obtained by continuous casting

Roestvrij staal in ingots of in andere primaire vormen; halffabricaten van roestvrij staal:

Andere:

Containing by weight 2.5% or more of nickel

Andere:

Rolled or obtained by continous casting

Andere:

Gesmeed

Enkel warm gewalst, opgerold:

Consigned from Türkiye

Met een dikte van 4,75 of meer doch niet meer dan 10 mm:

Consigned from Türkiye

Containing by weight less than 2.5% of nickel

Andere

Containing by weight 2.5% or more of nickel

Andere

Consigned from Türkiye

Met een dikte van minder dan 3 mm:

Consigned from Türkiye

Containing by weight less than 2.5% of nickel

Andere

Met een dikte van meer dan 10 mm:

Containing by weight less than 2.5% of nickel

Containing by weight 2.5% or more of nickel

Andere

Consigned from Türkiye

Met een dikte van 3 of meer doch minder dan 4,75 mm:

Andere

Consigned from Türkiye

Niet verder bewerkt dan koud gewalst (koud gereduceerd):

Consigned from Taiwan or Vietnam

Andere

Containing by weight 2.5% or more of nickel

Consigned from Türkiye

Containing by weight less than 2.5% of nickel

Consigned from Türkiye

Met een dikte van meer dan 1 doch minder dan 3 mm:

Consigned from Taiwan or Vietnam

Andere

Consigned from Taiwan or Vietnam

Andere

Containing by weight 2.5% or more of nickel

Consigned from Türkiye

Containing by weight less than 2.5% of nickel

Consigned from Türkiye

Met een dikte van minder dan 0,5 mm:

Consigned from Taiwan or Vietnam

Andere

Consigned from Taiwan or Vietnam

Andere

Perforated

Consigned from Türkiye

Andere:

Consigned from Türkiye

Gewalste platte producten van roestvrij staal, met een breedte van minder dan 600 mm:

Met een dikte van 4,75 mm of meer:

Andere

Consigned from Türkiye

Niet verder bewerkt dan koud gewalst (koud gereduceerd):

2.5% or more of nickel

Consigned from Türkiye

Less than 2.5% of nickel

Consigned from Türkiye

Of a thickness exceeding 0.35 mm but of less than 3 mm, containing by weight

Consigned from Taiwan or Vietnam

Andere

Consigned from Taiwan or Vietnam

Andere

2.5% or more of nickel

Consigned from Türkiye

Less than 2.5% of nickel

Consigned from Türkiye

Andere:

Consigned from Taiwan or Vietnam

Andere

Consigned from Taiwan or Vietnam

Andere

Containing by weight 2.5% or more of nickel

Staven en profielen van roestvrij staal:

Met een cirkelvormige dwarsdoorsnede:

2.5% or more of nickel

Of a diameter of less than 80 mm, containing by weight

Less than 2.5% of nickel

Containing by weight 2.5% or more of nickel

Staven, niet verder bewerkt dan door koud bewerken of koud nabewerken:

Of a diameter of 80 mm or more, containing by weight

Less than 2.5% of nickel

2.5% or more of nickel

Of a diameter of less than 25 mm, containing by weight

Less than 2.5% of nickel

2.5% or more of nickel

Andere staven:

2.5% or more of nickel

Andere:

Andere

Not further worked than hot-rolled, hot-drawn or extruded

Andere:

Andere

Containing by weight 2.5% or more of nickel

Andere

Containing by weight 13% or more but not more than 25% of chromium and 3.5% or more but not more than 6% of aluminium

Ander gelegeerd staal in ingots of in andere primaire vormen; halffabricaten van ander gelegeerd staal:

Of tool steel

Andere:

Of rectangular (including square) cross-section

Hot-rolled or obtained by continuous casting

Andere:

Hot-rolled or obtained by continuous casting

Van sneldraaistaal

Andere

Gesmeed

Hot-rolled or obtained by continuous casting

Andere

Ander gelegeerd staal in ingots of in andere primaire vormen; halffabricaten van ander gelegeerd staal:

Of tool steel

Andere:

Of rectangular (including square) cross-section

Hot-rolled or obtained by continuous casting

Andere:

Hot-rolled or obtained by continuous casting

Van sneldraaistaal

Andere

Gesmeed

Hot-rolled or obtained by continuous casting

Andere

Gewalste platte producten van ander gelegeerd staal, met een breedte van 600 mm of meer:

Met georiënteerde korrel:

With a maximum core loss not higher than 0.9 w/kg

With a maximum core loss higher than 1.05 w/kg

Andere:

Products clad, plated or coated, not in coils, without patterns in relief, of a thickness exceeding 10 mm and products clad, plated or coated, not in coils, without patterns in relief, of a thickness of 4.75 mm or more but not exceeding 10 mm and of a width of 2 050 mm or more

Cold-rolled

Of tool steel

Not further worked than rolled; not further worked than surface-treated, including cladding or simply cut into shapes other than rectangular (including square)

Andere

Of tool steel

Andere:

Met een dikte van 4,75 of meer doch niet meer dan 10 mm:

Andere

Andere, niet verder bewerkt dan koud gewalst (koud gereduceerd):

Not further worked than rolled; not further worked than surface-treated, including cladding or simply cut into shapes other than rectangular (including square)

Andere

Elektrolytisch verzinkt:

Andere

Aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips

Andere

Not further worked than surface-treated, including cladding or simply cut into shapes other than rectangular (including square)

Other, aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips

Andere

Plated or coated by hot dip galvanisation with magnesium and/or aluminium, whether or not alloyed with zinc, whether or not alloyed with silicon; chemically passivated; with additional surface treatment such as oiling or sealing; containing by weight: not more than 0.5% of carbon, not more than 1.1% of aluminium, not more than 0.12% of niobium, not more than 0.17% of titanium and not more than 0.15% of vanadium; presented in coils, cut-to-length sheets and narrow strips

Andere:

Other, aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips

Andere

Van siliciumstaal (transformatorstaal):

Of a width exceeding 500 mm

With a maximum core loss not higher than 0.9 w/kg

With a maximum core loss higher than 1.05 w/kg

Of a width not exceeding 500 mm

With a maximum core loss not higher than 0.9 w/kg

With a maximum core loss higher than 1.05 w/kg

Andere:

Products clad, plated or coated

Of a width not exceeding 350 mm and of a thickness of 50 mm or more

Andere:

Of a width not exceeding 500 mm

Andere:

Of tool steel

Met een dikte van 4,75 mm of meer:

Andere

Niet verder bewerkt dan koud gewalst (koud gereduceerd):

Of a width not exceeding 500 mm

Elektrolytisch verzinkt

Aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips

Andere

Of a width not exceeding 500 mm, hot-rolled, not further worked than clad; of a width exceeding 500 mm, not further worked than surface-treated, including cladding

Plated or coated by hot dip galvanisation with magnesium and/or aluminium, whether or not alloyed with zinc, whether or not alloyed with silicon; chemically passivated; with or without additional surface treatment such as oiling or sealing; containing by weight: not more than 0.5% of carbon, not more than 1.1% of aluminium, not more than 0.12% of niobium, not more than 0.17% of titanium and not more than 0.15% of vanadium; presented in coils, cut-to-length sheets and narrow strips

Andere:

Plated or coated by hot dip galvanisation with magnesium and/or aluminium, whether or not alloyed with zinc, whether or not alloyed with silicon; chemically passivated; with or without additional surface treatment such as oiling or sealing; containing by weight: not more than 0.5% of carbon, not more than 1.1% of aluminium, not more than 0.12% of niobium, not more than 0.17% of titanium and not more than 0.15% of vanadium; presented in coils, cut-to-length sheets and narrow strips

Andere

Van sneldraaistaal

Andere:

Containing by weight 0.9% or more but not more than 1.15% of carbon, 0.5% or more but not more than 2% of chromium and, if present, not more than 0.5% of molybdenum

Staven en profielen van ander gelegeerd staal; holle staven voor boringen van gelegeerd of van niet-gelegeerd staal:

Not further worked than hot-rolled, hot-drawn or extruded; hot-rolled, hot-drawn or extruded, not further worked than clad

Andere

Of rectangular (other than square) cross-section, hot-rolled on four faces

Andere:

Andere

Not further worked than hot-rolled, hot-drawn or extruded; hot-rolled, hot-drawn or extruded, not further worked than clad

Andere staven, enkel warm gewalst, warm getrokken of warm geperst:

Containing by weight 0.9% or more but not more than 1.15% of carbon, 0.5% or more but not more than 2% of chromium and, if present, not more than 0.5% of molybdenum

Andere

Of circular cross-section, of a diameter of

Less than 80 mm

Andere

Of tool steel

Andere staven, niet verder bewerkt dan door koud bewerken of koud nabewerken:

Containing by weight 0.9% or more but not more than 1.15% of carbon, 0.5% or more but not more than 2% of chromium and, if present, not more than 0.5% of molybdenum

Of circular cross-section, of a diameter of

Less than 80 mm

Andere staven:

Hot-rolled, hot-drawn or extruded, not further worked than clad

Andere:

Andere

Not further worked than hot-rolled, hot-drawn or extruded

Hot-rolled, hot-drawn or extruded, not further worked than clad

Holle staven voor boringen

Van siliciummangaanstaal

Van sneldraaistaal

Andere