HS-codes - 76: ALUMINIUM AND ARTICLES THEREOF
| 7601 | Ruw aluminium: |
| 7601.A | Niet-gelegeerd aluminium: |
| - | Slabs |
| - | Andere |
| 7601.B | Aluminiumlegeringen: |
| - | Slabs |
| - | Billets |
| - | Andere |
| 7602 | Resten en afval, van aluminium: |
| 7602.A | Resten: |
| - | Turnings, shavings, chips, milling waste, sawdust and filings; waste of coloured, coated or bonded sheets and foil, of a thickness (excluding any backing) not exceeding 0.2 mm |
| - | Other (including factory rejects) |
| - | Scrap |
| 7603 | Poeder en schilfers, van aluminium: |
| - | Powders of non-lamellar structure |
| - | Poeder met lamellaire structuur; schilfers |
| 7604 | Staven en profielen, van aluminium: |
| 7604.A | Van niet-gelegeerd aluminium: |
| 7604.A.A | Bars and rods |
| - | Unassembled, containing not more than 99.3% of aluminium |
| - | Andere |
| 7604.A.B | Profielen |
| 7604.A.B.A | Bearing a specific manufacture number, for use in certain types of aircraft |
| - | Unassembled, containing not more than 99.3% of aluminium |
| - | Andere |
| 7604.A.B.B | Conical shapes for reinforcing lateral rudders, for use in certain types of aircraft |
| - | Unassembled, containing not more than 99.3% of aluminium |
| - | Andere |
| 7604.A.B.C | Andere: |
| - | Unassembled, containing not more than 99.3% of aluminium |
| - | Andere |
| 7604.B | Van aluminiumlegeringen: |
| 7604.B.A | Holle profielen: |
| - | Hollow profile with:-one closed chamber of aluminum alloy 6063-t5 or 6060-t5,-a wall thickness of not more than 0.7 mm, and-an anodised layer of 10 µm at the surface,for use in the manufacture of board frames of whiteboards, cork boards, easel boards, education boards and display cases |
| - | Andere |
| 7604.B.B | Andere: |
| 7604.B.B.A | Bars and rods |
| - | Bars of aluminium-lithium alloys |
| - | Aluminium alloy rods with a diameter of 300.1 mm or more, but not more than 533.4 mm |
| - | Bars and rods of aluminium alloys containing by weight:- 0.25% or more but not more than 7% of zinc, and- 1% or more but not more than 3% of magnesium, and- 1% or more but not more than 5% of copper, and- not more than 1% of manganeseconsistent with the material specifications ams qq-a-225, of a kind used in aerospace industry (inter alia conforming nadcap and as9100) and obtained by rolling mill process |
| - | Andere |
| 7604.B.B.B | Profielen |
| - | Bearing a specific manufacture number, for use in certain types of aircraft |
| - | Conical shapes for reinforcing lateral rudders, for use in certain types of aircraft |
| - | Andere |
| 7605 | Draad van aluminium: |
| 7605.A | Van niet-gelegeerd aluminium: |
| - | Waarvan de grootste afmeting van de dwarsdoorsnede 7 mm overtreft |
| 7605.A.A | Andere: |
| - | Not alloyed aluminium wire, of a diameter of 2 mm or more but not more than 6 mm, covered with a layer of copper of a thickness of 0.032 mm or more but not more than 0.117 mm |
| - | Andere |
| 7605.B | Van aluminiumlegeringen: |
| 7605.B.A | Waarvan de grootste afmeting van de dwarsdoorsnede 7 mm overtreft: |
| - | Aluminium alloy wire with a diameter of 9.50 mm or more but not more than 19.15 mm, in coils, for use in the manufacture of aeronautical fasteners |
| - | Andere |
| - | Andere |
| 7606 | Aluminium plates, sheets and strip, of a thickness exceeding 0.2 mm |
| 7606.A | Vierkant of rechthoekig: |
| 7606.A.A | Van niet-gelegeerd aluminium: |
| - | Aluminium composite panel |
| 7606.A.A.A | Andere: |
| 7606.A.A.A.A | Geverfd, gevernist of bekleed met kunststof: |
| 7606.A.A.A.A.A | Plates bearing a specific manufacture number, for use in certain types of aircraft |
| - | Not backed, without internal layers of other material |
| - | Andere |
| 7606.A.A.A.A.B | Andere: |
| - | Not backed, without internal layers of other material |
| - | Andere |
| 7606.A.A.A.B | Other, of a thickness of |
| 7606.A.A.A.B.A | Less than 3 mm |
| 7606.A.A.A.B.A.A | Plates bearing a specific manufacture number, for use in certain types of aircraft |
| - | Not backed, without internal layers of other material |
| - | Andere |
| 7606.A.A.A.B.A.B | Andere: |
| - | Not backed, without internal layers of other material |
| - | Andere |
| 7606.A.A.A.B.B | Not less than 3 mm but less than 6 mm |
| 7606.A.A.A.B.B.A | Plates bearing a specific manufacture number, for use in certain types of aircraft |
| - | Not backed, without internal layers of other material |
| - | Andere |
| 7606.A.A.A.B.B.B | Andere: |
| - | Not backed, without internal layers of other material |
| - | Andere |
| 7606.A.A.A.B.C | Not less than 6 mm |
| 7606.A.A.A.B.C.A | Plates bearing a specific manufacture number, for use in certain types of aircraft |
| - | Not backed, without internal layers of other material |
| - | Andere |
| 7606.A.A.A.B.C.B | Andere: |
| - | Not backed, without internal layers of other material |
| - | Andere |
| 7606.A.B | Van aluminiumlegeringen: |
| 7606.A.B.A | Beverage can body stock, end stock and tab stock |
| - | Beverage can body stock |
| - | Beverage can end stock and tab stock |
| - | Aluminium composite panel |
| 7606.A.B.B | Andere: |
| 7606.A.B.B.A | Geverfd, gevernist of bekleed met kunststof: |
| 7606.A.B.B.A.A | Plates bearing a specific manufacture number, for use in certain types of aircraft |
| 7606.A.B.B.A.A.A | Not backed, without internal layers of other material |
| - | Of a thickness of not less than 0.8 mm |
| - | Andere |
| - | Andere |
| 7606.A.B.B.A.B | Andere: |
| 7606.A.B.B.A.B.A | Not backed, without internal layers of other material |
| - | For use as body panels in the car industry and of a thickness of not more than 6 mm or for use in the manufacture of aircraft parts and of a thickness of not less than 0.8 mm |
| 7606.A.B.B.A.B.A.A | Andere: |
| - | Hot rolled coils, tension levelled, of a thickness not exceeding 1.5 mm, of a width of not less than 800 mm but not exceeding 2050 mm, for use in the manufacture of aluminium composite panels |
| - | Andere |
| - | Andere |
| 7606.A.B.B.B | Other, of a thickness of |
| 7606.A.B.B.B.A | Less than 3 mm |
| 7606.A.B.B.B.A.A | Plates bearing a specific manufacture number, for use in certain types of aircraft |
| 7606.A.B.B.B.A.A.A | Not backed, without internal layers of other material |
| - | Of a thickness of not less than 0.8 mm |
| - | Andere |
| - | Andere |
| 7606.A.B.B.B.A.B | Andere: |
| 7606.A.B.B.B.A.B.A | Not backed, without internal layers of other material |
| - | For use as body panels in the car industry or for use in the manufacture of aircraft parts and of a thickness of not less than 0.8 mm |
| 7606.A.B.B.B.A.B.A.A | Andere: |
| - | Hot rolled coils, tension levelled, of a thickness not exceeding 1.5 mm, of a width of not less than 800 mm but not exceeding 2050 mm, for use in the manufacture of aluminium composite panels |
| - | Andere |
| - | Andere |
| 7606.A.B.B.B.B | Not less than 3 mm but less than 6 mm |
| - | Plates bearing a specific manufacture number, for use in certain types of aircraft |
| 7606.A.B.B.B.B.A | Andere: |
| 7606.A.B.B.B.B.A.A | Not backed, without internal layers of other material |
| - | For use as body panels in the car industry or for use in the manufacture of aircraft parts |
| - | Andere |
| - | Andere |
| 7606.A.B.B.B.C | Not less than 6 mm |
| - | Plates bearing a specific manufacture number, for use in certain types of aircraft |
| 7606.A.B.B.B.C.A | Sheets of aluminium-lithium alloys |
| 7606.A.B.B.B.C.A.A | Not backed, without internal layers of other material |
| - | For use as body panels in the car industry and with a thickness of 6 mm or for use in the manufacture of aircraft parts |
| - | Andere |
| - | Andere |
| 7606.A.B.B.B.C.B | Andere: |
| 7606.A.B.B.B.C.B.A | Not backed, without internal layers of other material |
| - | For use as body panels in the car industry and with a thickness of 6 mm or for use in the manufacture of aircraft parts |
| - | Andere |
| - | Andere |
| 7606.B | Andere: |
| 7606.B.A | Van niet-gelegeerd aluminium: |
| 7606.B.A.A | Plates bearing a specific manufacture number, for use in certain types of aircraft |
| - | Not backed, without internal layers of other material,- in coils or in coiled strips, in cut-to-length sheets, or in the form of circles; of a thickness exceeding 0.2 mm but not exceeding 6 mm;- in plates, of a thickness exceeding 6 mm |
| - | Andere |
| 7606.B.A.B | Andere: |
| - | Not backed, without internal layers of other material,- in coils or in coiled strips, in cut-to-length sheets, or in the form of circles; of a thickness exceeding 0.2 mm but not exceeding 6 mm;- in plates, of a thickness exceeding 6 mm |
| - | Andere |
| 7606.B.B | Van aluminiumlegeringen: |
| 7606.B.B.A | Plates bearing a specific manufacture number, for use in certain types of aircraft |
| 7606.B.B.A.A | Not backed, without internal layers of other material,- in coils or in coiled strips, in cut-to-length sheets, or in the form of circles; of a thickness exceeding 0.2 mm but not exceeding 6 mm;- in plates, of a thickness exceeding 6 mm |
| - | Of a thickness of not less than 0.8 mm, for use in the manufacture of aircraft parts |
| - | Andere |
| - | Andere |
| 7606.B.B.B | Andere: |
| 7606.B.B.B.A | Not backed, without internal layers of other material,- in coils or in coiled strips, in cut-to-length sheets, or in the form of circles; of a thickness exceeding 0.2 mm but not exceeding 6 mm;- in plates, of a thickness exceeding 6 mm |
| - | For use as body panels in the car industry and of a thickness of not more than 6 mm or for use in the manufacture of aircraft parts and of a thickness of not less than 0.8 mm |
| 7606.B.B.B.A.A | Andere: |
| - | Hot rolled coils, tension levelled, of a thickness not exceeding 1.5 mm, of a width of not less than 800 mm but not exceeding 2050 mm, for use in the manufacture of aluminium composite panels |
| - | Andere |
| - | Andere |
| 7607 | Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0.2 mm |
| 7607.A | Niet op een drager: |
| 7607.A.A | Enkel gewalst: |
| 7607.A.A.A | Of a thickness of less than 0.021 mm |
| 7607.A.A.A.A | In rolls of a weight not exceeding 10 kg |
| 7607.A.A.A.A.A | Of a thickness of 0.007 mm or more but less than 0.021 mm |
| - | Consigned from Thailand |
| - | Andere |
| - | Andere |
| 7607.A.A.A.B | Andere: |
| - | For household use, of a thickness of not less than 0.008 mm and not more than 0.018 mm, in rolls of a width not exceeding 650 mm |
| - | For household use, of a thickness of not less than 0.007 mm and less than 0.008 mm, whether or not annealed |
| - | For household use, of a thickness of not less than 0.008 mm and not more than 0.018 mm, in rolls of a width exceeding 650 mm, whether or not annealed |
| - | For household use, of a thickness of more than 0.018 mm and less than 0.021 mm, whether or not annealed |
| - | For other uses than household aluminium foil,- of a thickness of not less than 0.007 mm and less than 0.008 mm, whether or not annealed, or,- of a thickness of not less than 0.008 mm and not more than 0.018 mm, in rolls of a width exceeding 650 mm, whether or not annealed, or,- of a thickness of more than 0.018 mm and less than 0.021 mm, whether or not annealed |
| 7607.A.A.A.B.A | Andere: |
| - | Aluminium converter foil |
| - | Household aluminium foil |
| - | Andere |
| 7607.A.A.B | Of a thickness of not less than 0.021 mm but not more than 0.2 mm |
| 7607.A.A.B.A | Aluminium foil in rolls:- having a purity of 99.99% by weight, - of a thickness of 0.021 mm or more but not more than 0.2 mm, - with a width of 500 mm, - with a surface oxide layer by 3 to 4 nm thick, - and with a cubic texture of more than 95% |
| 7607.A.A.B.A.A | Of a thickness of not less than 0.021 mm and not more than 0.045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers |
| - | Of a thickness of not less than 0.03 mm, without internal layers of other material |
| - | Andere |
| 7607.A.A.B.A.B | Of a thickness of not less than 0.021 mm and not more than 0.045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers, for other uses than aluminium household foil |
| - | Of a thickness of not less than 0.03 mm, without internal layers of other material |
| - | Andere |
| 7607.A.A.B.A.C | Andere: |
| - | Of a thickness of not less than 0.03 mm but less than 0.2 mm, without internal layers of other material, in coils or in coiled strips |
| 7607.A.A.B.A.C.A | Of a thickness of 0.2 mm, in coils or in coiled strips, in cut-to-length sheets, or in the form of circles |
| 7607.A.A.B.A.C.A.A | Without internal layers of other material |
| - | Alloyed, for use as body panels in the car industry |
| - | Andere |
| - | Andere |
| - | Andere |
| 7607.A.A.B.B | Plain aluminium foil with the following parameters:- an aluminium content of 99.98% or more- a thickness of 0.070 mm or more but not more than 0.125 mm- with a cubic texture of a kind used for high voltage etching |
| - | Plain aluminium foil with the following parameters:-an aluminium content of 99.98% or more,-a thickness of 0.070 mm or more but not more than 0.125 mm,-with a cubic texture,of a kind used for high voltage etching |
| - | Plain aluminium foil with the following parameters:-an aluminium content of 99.98% or more,-a thickness of 0.070 mm or more but not more than 0.125 mm,-with a cubic texture,of a kind used for high voltage etching |
| 7607.A.A.B.C | Andere: |
| 7607.A.A.B.C.A | Of a thickness of not less than 0.021 mm and not more than 0.045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers |
| - | Of a thickness of not less than 0.03 mm, without internal layers of other material |
| - | Andere |
| 7607.A.A.B.C.B | Of a thickness of not less than 0.021 mm and not more than 0.045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers, for other uses than aluminium household foil |
| - | Of a thickness of not less than 0.03 mm, without internal layers of other material |
| - | Andere |
| 7607.A.A.B.C.C | Aluminium and magnesium alloy strip or foil:- of an alloy conforming to standards 5182-h19 or 5052-h19,- in rolls with an outside diameter of minimum 1 250 mm but not more than 1 350 mm,- of a thickness (tolerance - 0.006 mm) of 0.15 mm, 0.16 mm, 0.18 mm or 0.20 mm,- of a width ( tolerance ± 0.3 mm) of 12.5 mm, 15.0 mm, 16.0 mm, 25.0 mm, 35.0 mm, 50.0 mm or 356 mm, - having a camber tolerance of not more than 0.4 mm/750 mm,- of a flatness measurement: i-unit ±4,- having a tensile strength of more than (5182-h19) 365 mpa or (5052-h19) 320 mpa,- of an elongation a50 of more than (5182-h19) 3% or (5052-h19) 2.5%for use in the manufacture of slats for blinds |
| - | Of a thickness of not less than 0.03 mm but less than 0.2 mm, without internal layers of other material, in coils or in coiled strips |
| 7607.A.A.B.C.C.A | Of a thickness of 0.2 mm |
| 7607.A.A.B.C.C.A.A | Without internal layers of other material |
| - | For use as body panels in the car industry |
| - | Andere |
| - | Andere |
| - | Andere |
| 7607.A.A.B.C.D | Andere: |
| - | Of a thickness of not less than 0.03 mm but less than 0.2 mm, without internal layers of other material, in coils or in coiled strips |
| 7607.A.A.B.C.D.A | Of a thickness of 0.2 mm, in coils or in coiled strips, in cut-to-length sheets, or in the form of circles |
| 7607.A.A.B.C.D.A.A | Without internal layers of other material |
| - | Alloyed, for use as body panels in the car industry |
| - | Andere |
| - | Andere |
| - | Andere |
| 7607.A.B | Andere: |
| 7607.A.B.A | Of a thickness of less than 0.021 mm |
| 7607.A.B.A.A | Of a thickness of 0.007 mm or more but less than 0.021 mm, in rolls of a weight not exceeding 10 kg, not further worked than rolled, embossed |
| - | Consigned from Thailand |
| - | Andere |
| - | Andere |
| 7607.A.B.B | Of a thickness of not less than 0.021 mm but not more than 0.2 mm |
| - | Of a thickness of not less than 0.03 mm but less than 0.2 mm, without internal layers of other material, in coils or in coiled strips |
| 7607.A.B.B.A | Of a thickness of 0.2 mm, in coils or in coiled strips, in cut-to-length sheets, or in the form of circles |
| 7607.A.B.B.A.A | Without internal layers of other material |
| - | Alloyed, for use as body panels in the car industry |
| 7607.A.B.B.A.A.A | Andere: |
| - | Hot rolled coils, alloyed, tension levelled, of a width of not less than 800 mm but not exceeding 2050 mm, for use in the manufacture of aluminium composite panels |
| - | Andere |
| - | Andere |
| - | Andere |
| 7607.B | Op een drager: |
| - | Of a thickness (excluding any backing) of less than 0.021 mm |
| 7607.B.A | Of a thickness (excluding any backing) of not less than 0.021 mm but not more than 0.2 mm |
| - | Aluminium composite panel |
| - | Andere |
| 7608 | Buizen en pijpen, van aluminium: |
| 7608.A | Van niet-gelegeerd aluminium: |
| 7608.A.A | With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft |
| - | Unassembled, not welded, containing not more than 99.3% of aluminium |
| - | Andere |
| - | Tubes and pipes, ready for fitting, usable as hydraulic conduits or as conduits for fuel-oil or lubricants for use in certain types of aircraft |
| 7608.A.B | Andere: |
| - | Unassembled, not welded, containing not more than 99.3% of aluminium |
| - | Andere |
| 7608.B | Van aluminiumlegeringen: |
| 7608.B.A | Welded |
| - | With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft |
| - | Tubes and pipes, ready for fitting, usable as hydraulic conduits or as conduits for fuel-oil or lubricants for use in certain types of aircraft |
| - | Andere |
| 7608.B.B | Andere: |
| 7608.B.B.A | Not further worked than extruded |
| - | With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft |
| - | Seamless aluminium alloyed extruded tubes (aluminum 6061f according to standard astm b241) with:-an outer diameter of 320 mm or more but not more than 400 mm, and-a wall thickness of 8 mm or more but not more than 10 mm,for use in the manufacture of high pressure vessels |
| - | Andere |
| 7608.B.B.B | Andere: |
| - | With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft |
| - | Tubes and pipes, ready for fitting, usable as hydraulic conduits or as conduits for fuel-oil or lubricants for use in certain types of aircraft |
| - | Seamless aluminium alloyed extruded tubes with:- an outer diameter of 60 mm or more but not more than 420 mm, and- a wall thickness of 10 mm or more but not more than 80 mm |
| - | Andere |
| 7609 | Hulpstukken (fittings) voor buisleidingen (bijvoorbeeld verbindingsstukken, ellebogen, moffen), van aluminium: |
| - | For use in certain types of aircraft |
| - | Aluminium connecting block for automotive air conditioning systems:-with a t6 hardening,-equipped with round stubs with a circumferential outer groove,-with through or non-through holes, made of profiles with an upper radius of 8 mm or more but not more than 11 mm, and a lower radius of 12 mm or more but not more than 17 mm,-with a distance between holes of 15 mm or more but not more than 22 mm,-with sockets designed for brazing or clamping,-with mounting holes for m6 or m8 mounting screw, threaded or not,-with a width of 5 mm or more but not more than 16 mm,-for connecting a compressor, a condenser, an evaporator, a chiller and other lines |
| - | Flame brazed aluminium block for connecting tubes in automotive heat exchangers and/or turbocharged air coolers and/or automatic transmission coolers:-with extruded, bent connection tubes with an outer diameter of 5 mm or more, but not more than 25 mm,-with a weight of 0.02 kg or more, but not more than 0.25 kg,for use in the manufacture of cooling system in vehicles of chapter 87 |
| - | Machined aluminium components:-containing by weight 0.55%, or more but not more than 0.61% of magnesium,-containing by weight 0.55%, or more but not more than 0.61% of silicon,-with a hardening state of t5 or t6,-with a mass of 0.05 kg or more, but not more than 0.2 kg,for use in the manufacture of co₂ cooling systems in motor vehicles |
| - | Aluminium connection block:-with a weight of 3 g or more but not more than 400 g,-manufactured from 6061-t6 or 6060-t6 or 6082-t6 aluminium grade,-being an integral part of an air conditioning hose assembly or oil cooling line hose assembly or air brake line hose assembly or water cooling line hose assembly,-with holes (sockets) or splines (pilots) or threads that allow installation in an automotive or other air conditioning system (also understood as installation in the line),-with sockets designed for brazing or fastening,-with at least 1 through-hole with a diameter of 3 mm or more but not more than 25 mm,for the manufacture of automotive cooling and air conditioning systems |
| - | Andere |
| 7610 | Constructiewerken en delen van constructiewerken (bijvoorbeeld bruggen, brugdelen, torens, vakwerkmasten en andere masten, pijlers, kolommen, kapconstructies, deuren en ramen, alsmede kozijnen daarvoor, drempels, luiken, balustrades), van aluminium, andere dan de geprefabriceerde bouwwerken bedoeld bij post 9406; platen, staven, profielen, buizen en dergelijke, van aluminium, gereedgemaakt voor gebruik in constructiewerken: |
| - | Deuren en ramen, alsmede kozijnen daarvoor en drempels |
| 7610.A | Andere: |
| - | Bridges and bridge-sections, towers and lattice masts |
| 7610.A.A | Andere: |
| - | Bars, rods, profiles (whether or not hollow), tubes, pipes, unassembled, not welded, made from aluminium, whether or not alloyed, containing not more than 99.3% of aluminium |
| 7610.A.A.A | Andere: |
| - | Products attached (e.g. by welding or fasteners) to form subassemblies |
| - | Products in a packaged kit with the necessary parts to assemble a finished product without further finishing or fabrication of the parts (‘finished goods kit’) |
| - | Andere |
| 7611 | Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment |
| 7612 | Reservoirs, fusten, trommels, bussen, blikken en dergelijke bergingsmiddelen (buisjes en tubes daaronder begrepen), voor ongeacht welke goederen (andere dan voor gecomprimeerd of vloeibaar gemaakt gas), van aluminium, met een inhoudsruimte van niet meer dan 300 l, niet voorzien van een mechanische inrichting of van een inrichting om te koelen of te warmen, ook indien inwendig bekleed of voorzien van een warmte-isolerende bekleding: |
| - | Soepele tubes (bijvoorbeeld voor tandpasta) |
| 7612.A | Andere: |
| - | Containers of a kind used for aerosols |
| - | Manufactured from foil of a thickness not exceeding 0.2 mm |
| - | Andere |
| 7613 | Bergingsmiddelen voor gecomprimeerd of voor vloeibaar gemaakt gas, van aluminium: |
| - | Bottles for inflating escape chutes, intended for use in certain types of aircraft |
| - | Andere |
| 7614 | Kabels, strengen en dergelijke artikelen, van aluminium, niet geïsoleerd voor het geleiden van elektriciteit: |
| - | Met een kern van staal |
| - | Andere |
| 7615 | Keukengerei, toiletartikelen, huishoudelijke en sanitaire artikelen, alsmede delen daarvan, van aluminium; sponsen, schuurlappen, schuurhandjes en dergelijke artikelen voor het schuren, voor het polijsten of voor dergelijke doeleinden, van aluminium: |
| 7615.A | Keukengerei en huishoudelijke artikelen, alsmede delen daarvan; sponsen, schuurlappen, schuurhandjes en dergelijke artikelen voor het schuren, voor het polijsten of voor dergelijke doeleinden: |
| 7615.A.A | Cast |
| - | Aluminium radiators and elements or sections of which such radiator is composed, whether or not such elements are assembled in blocks |
| - | Andere |
| - | Manufactured from foil of a thickness not exceeding 0.2 mm |
| 7615.A.B | Andere: |
| - | Aluminium radiators and elements or sections of which such radiator is composed, whether or not such elements are assembled in blocks |
| - | Andere |
| - | Toiletartikelen en sanitaire artikelen, alsmede delen daarvan |
| 7616 | Andere werken van aluminium: |
| 7616.A | Draadnagels, spijkers, aangepunte krammen, schroeven, bouten, moeren, haken met schroefdraad, klinknagels en klinkbouten, splitpennen, spiebouten, spieën, sluitringen en dergelijke artikelen: |
| - | Self-locking bolts and nuts (of the type "hi-lok") |
| 7616.A.A | Andere: |
| - | For use in certain types of aircraft |
| - | Andere |
| 7616.B | Andere: |
| - | Metaaldoek, metaalgaas en traliewerk, van aluminiumdraad |
| 7616.B.A | Andere: |
| 7616.B.A.A | Cast |
| - | Collars, flanges and other devices for fixing, jointing, clamping or spacing, for use in certain types of aircraft |
| - | "quick change" apparatus for transforming passenger transport aeroplanes into goods transport aeroplanes and vice versa, for use in certain types of aircraft |
| 7616.B.A.A.A | Andere: |
| - | Aluminium radiators and elements or sections of which such radiator is composed, whether or not such elements are assembled in blocks |
| - | Andere |
| 7616.B.A.B | Andere: |
| 7616.B.A.B.A | Hand-made |
| - | Aluminium radiators and elements or sections of which such radiator is composed, whether or not such elements are assembled in blocks |
| - | Andere |
| 7616.B.A.B.B | Andere: |
| - | "quick change" apparatus for transforming passenger transport aeroplanes into goods transport aeroplanes and vice versa, for use in certain types of aircraft |
| - | Plates and sheets of variable thickness of widths of 1 200 mm or more, for use in certain types of aircraft |
| - | Connecting components for use in the production of helicopter tail rotor shafts |
| - | Television pedestal stands with or without bracket for fixation to and stabilisation of television cabinet case/body |
| 7616.B.A.B.B.A | Andere: |
| - | Aluminium radiators and elements or sections of which such radiator is composed, whether or not such elements are assembled in blocks |
| - | Andere |
Need help to the find appropriate HS Code ?
or