Codes SH - 72: IRON AND STEEL

Fontes brutes et fontes spiegel en gueuses, saumons ou autres formes primaires:

Containing by weight not less than 0.4% of manganese

Pig iron ingots with a length of not more than 350 mm, a width of not more than 150 mm, a height of not more than 150 mm

Containing by weight more than 1% of silicon

Pig iron ingots with a length of not more than 350 mm, a width of not more than 150 mm, a height of not more than 150 mm, containing by weight not more than 1% of silicon

Containing by weight less than 0.1% of manganese

Fontes brutes alliées; fontes spiegel:

Autres

Non-alloy pig iron containing by weight 0.5% or less of phosphorus

Containing by weight 1% or less of silicon

Autres

Containing by weight not less than 0.1% but less than 0.4% of manganese

Autres

Non-alloy pig iron containing by weight more than 0.5% of phosphorus

Alloy pig iron containing by weight not less than 0.3% but not more than 1% of titanium and not less than 0.5% but not more than 1% of vanadium

Ferro-alliages:

Containing by weight more than 2% of carbon

Autres

Ferrosilicium:

Autres:

Autres

Ferrochrome:

Containing by weight more than 4% but not more than 6% of carbon

Autres:

Containing by weight more than 30% but not more than 90% of chromium (super-refined ferrochromium)

Containing by weight more than 0.05% but not more than 0.5% of carbon

Containing by weight not more than 0.1% of carbon and more than 30% but not more than 90% of chromium (super-refined ferrochromium)

Autres

Ferrosilicochrome

Ferromolybdène

Autres:

Ferrovanadium

Autres:

Ferro-silico-magnesium

Ferro-dysprosium, containing by weight:- 78% or more of dysprosium and- 18% or more but no more than 22% of iron

Autres

Produits ferreux obtenus par réduction directe des minerais de fer

Déchets et débris de fonte, de fer ou d'acier (ferrailles); déchets lingotés en fer ou en acier:

Déchets et débris d'aciers alliés:

Containing by weight 8% or more of nickel

Autres

Scrap

Autres:

Autres

Scrap

Autres déchets et débris:

Turnings, shavings, chips, milling waste, sawdust and filings

Autres

In bundles

Autres

Scrap

Autres:

Scrap

Autres:

Scrap

Autres:

Autres

Grenailles et poudres de fonte brute, de fonte spiegel, de fer ou d'acier:

Poudres:

Autres

Lingots

Fer et aciers non alliés en lingots ou autres formes primaires, à l'exclusion du fer du no 7203:

Autres

Containing by weight less than 0.25% of carbon

Rolled or obtained by continuous casting

Autres:

Of a thickness exceeding 130 mm

Autres, de section transversale rectangulaire:

Forgées

Of circular or polygonal cross-section

Forgées

Blanks for angles, shapes and sections, rolled or obtained by continuous casting

Containing by weight 0.25% or more of carbon

Rolled or obtained by continuous casting

Other, containing by weight

0.6% or more of carbon

Autres, de section transversale rectangulaire:

Forgées

Rolled or obtained by continuous casting

Autres:

Autres

Enroulés, simplement laminés à chaud, présentant des motifs en relief

D'une épaisseur de 4,75 mm ou plus

D'une épaisseur inférieure à 3 mm

D'une épaisseur excédant 10 mm

Intended for re-rolling

D'une épaisseur de 3 mm ou plus mais inférieure à 4,75 mm:

Autres

Intended for re-rolling

Non enroulés, simplement laminés à chaud, présentant des motifs en relief:

Of a thickness of less than 2 mm

D'une épaisseur excédant 10 mm:

Of non-alloy steel, excluding tool steel

Of a thickness exceeding 10 mm but not exceeding 15 mm, of a width of

Of non-alloy steel, excluding tool steel

Less than 2 050 mm

Autres

Rolled on four faces or in a closed box pass, of a width not exceeding 1 250 mm

2 050 mm or more

Autres

D'une épaisseur de 3 mm ou plus mais inférieure à 4,75 mm:

Autres

Autres:

Of non-alloy steel, excluding tool steel, of a thickness exceeding 10 mm or of a thickness of 4.75 mm or more but not exceeding 10 mm and of a width of 2 050 mm or more

Autres:

Of non-alloy steel, excluding tool steel, of a thickness exceeding 10 mm or of a thickness of 4.75 mm or more but not exceeding 10 mm and of a width of 2 050 mm or more

Produits laminés plats, en fer ou en aciers non alliés, d'une largeur de 600 mm ou plus, laminés à froid, non plaqués ni revêtus:

D'une épaisseur de 3 mm ou plus:

Autres

'electrical'

D'une épaisseur de 0,5 mm ou plus mais n'excédant pas 1 mm:

Autres

'electrical'

Of a thickness of 0.35 mm or more but less than 0.5 mm

Annealed (known as 'black plates')

Non enroulés, simplement laminés à froid:

'electrical'

D'une épaisseur excédant 1 mm mais inférieure à 3 mm:

Autres

'electrical'

D'une épaisseur inférieure à 0,5 mm:

Autres

Perforated

Not further worked than surface-treated or simply cut into shapes other than rectangular (including square)

Produits laminés plats, en fer ou en aciers non alliés, d'une largeur de 600 mm ou plus, plaqués ou revêtus:

D'une épaisseur de 0,5 mm ou plus:

Autres

Tinplate

Autres

Not further worked than surface-treated or simply cut into shapes other than rectangular (including square)

Plombés, y compris le fer terne:

Autres

Not further worked than surface-treated or simply cut into shapes other than rectangular (including square)

Autrement zingués:

Aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips

Autres

Aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips

Autres

Not further worked than surface-treated or simply cut into shapes other than rectangular (including square)

Revêtus d'aluminium:

Aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips

Autres

Aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips

Autres

Tinplate, varnished; products, plated or coated with chromium oxides or with chromium and chromium oxides, varnished

Autres

Not further worked than surface-treated or simply cut into shapes other than rectangular (including square)

Autres:

Autres

Of non-alloy steel, painted, varnished or coated with plastics on at least one side, excluding so-called 'sandwich panels' of a kind used for building applications and consisting of two outer metal sheets with a stabilising core of insulation material sandwiched between them, and excluding those products with a final coating of zinc-dust (a zinc-rich paint, containing by weight 70% or more of zinc) and excluding products with a substrate with a metallic coating of chromium or tin

Coated or plated with tin

Autres:

Tinned and printed

Autres

Coated or plated with tin, whether or not coated with a plastic material and/or varnished

Not further worked than surface-treated, including cladding, or simply cut into shapes other than rectangular (including square)

Autres

Simplement laminés à chaud:

Of a width not exceeding 350 mm and of a thickness of 50 mm or more

Autres, d'une épaisseur de 4,75 mm ou plus:

Of a width not exceeding 500 mm

Autres

Of a width exceeding 500 mm

Of a width not exceeding 350 mm and of a thickness of 50 mm or more

Simplement laminés à froid:

'electrical'

Of a width not exceeding 500 mm

Of a thickness of 0.35 mm or more

Of a width not exceeding 500 mm

Autres

Of a width exceeding 500 mm

Autres

In coils intended for the manufacture of tinplate

Autres

In coils, annealed (known as 'black plates')

Autres:

'electrical'

Of a width not exceeding 500 mm

Autres

Perforated

Of a width exceeding 500 mm

Autres

Produits laminés plats, en fer ou en aciers non alliés, d'une largeur inférieure à 600 mm, plaqués ou revêtus:

Tinplate, not further worked than surface-treated

Of a width exceeding 500 mm

Autres

Zingués électrolytiquement:

Not further worked than surface-treated

Of a width not exceeding 500 mm

Aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips

Autres

Tinplate, not further worked than varnished; products, plated or coated with chromium oxides or with chromium and chromium oxides, varnished

Autres:

Not further worked than surface-treated

Of a width not exceeding 500 mm

Of a width exceeding 500 mm

Of non-alloy steel, painted, varnished or coated with plastics on at least one side, excluding products with a final coating of zinc-dust (a zinc-rich paint, containing by weight 70% or more of zinc) and excluding products with a substrate with a metallic coating of chromium or tin

Coated or plated with tin

Autres:

Autres:

Autres

Of non-alloy steel, painted, varnished or coated with plastics on at least one side, excluding so-called 'sandwich panels' of a kind used for building applications and consisting of two outer metal sheets with a stabilising core of insulation material sandwiched between them, and excluding those products with a final coating of zinc-dust (a zinc-rich paint, containing by weight 70% or more of zinc)

Autres

Coated or plated with tin

Autrement revêtus:

Of a width exceeding 500 mm

Autres

Plated or coated with chromium or nickel

Not further worked than surface-treated

Of a width not exceeding 500 mm

Of a width exceeding 500 mm

Autres

Revêtus d'aluminium:

Aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips

Autres

Aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips

Autres

Of a width exceeding 500 mm

Autres:

Plated or coated by hot dip galvanisation with magnesium or magnesium-zinc alloys, whether or not alloyed with silicon; chemically passivated; with or without any additional surface treatment such as oiling or sealing; containing by weight: not more than 0.5% of carbon, not more than 1.1% of aluminium, not more than 0.12% of niobium, not more than 0.17% of titanium and not more than 0.15% of vanadium; presented in coils, cut-to-length sheets and narrow strips

Of a width not exceeding 500 mm

Autres

Fil machine en fer ou en aciers non alliés:

Autres, en aciers de décolletage

De section circulaire d'un diamètre inférieur à 14 mm:

Of a type used for tyre cord

Containing by weight 0.06% or less of carbon

Containing by weight 0.25% or more but not more than 0.75% of carbon

Autres:

Containing by weight 0.25% or more of carbon

Forgées:

Autres

High fatigue performance concrete reinforcing bars and rods

Concrete reinforcement bars and rods excluding long products, such as round bars

Autres, en aciers de décolletage:

Autres

De section transversale rectangulaire:

Concrete reinforcement bars and rods, containing indentations, ribs, grooves or other deformations produced during the rolling process; excluding high fatigue performance concrete reinforcement bars and rods, and excluding other long products, such as round bars

Containing by weight 0.25% or more of carbon

Autres

Containing by weight less than 0.25% of carbon

Bars and rods, containing indentations, ribs, grooves or other deformations produced during the rolling process; excluding high fatigue performance bars and rods, and excluding other long products, such as round bars

Other, of circular cross-section measuring in diameter

Less than 80 mm

Containing by weight 0.25% or more of carbon

80 mm or more

Autres:

Autres

En aciers de décolletage, simplement obtenues ou parachevées à froid

Containing by weight less than 0.25% of carbon

Autres

Autres:

Autres

Profilés en u, en i ou en h, simplement laminés ou filés à chaud, d'une hauteur de moins de 80 mm

Profilés en l

Profilés en u, en i ou en h, simplement laminés ou filés à chaud, d'une hauteur de 80 mm ou plus:

Of a height of 80 mm or more but not exceeding 220 mm

Profilés en i:

With parallel flange faces

Of a height exceeding 220 mm

Autres

Of a height of 80 mm or more but not exceeding 180 mm

Profilés en l ou en t, simplement laminés ou filés à chaud, d'une hauteur de 80 mm ou plus:

Profilés en t

With a cross-section which is capable of being enclosed in a square the side of which is 80 mm

Bulb flats

Autres

Profilés, simplement obtenus ou parachevés à froid:

C, l, u, z, omega or open-ended sections

Autres

Obtenus ou parachevés à froid à partir de produits laminés plats:

Autres

Hot-rolled, hot-drawn or extruded, not further worked than clad

Fils en fer ou en aciers non alliés:

Containing by weight less than 0.25% of carbon

With a maximum cross-sectional dimension of 0.8 mm or more

Autres

Containing by weight 0.6% or more of carbon

Autres

Containing by weight less than 0.25% of carbon

With a maximum cross-sectional dimension of 0.8 mm or more

Containing by weight 0.6% or more of carbon

Autres

Containing by weight less than 0.25% of carbon

Autres

Containing by weight 0.6% or more of carbon

Containing by weight less than 0.25% of carbon

Containing by weight 0.6% or more of carbon

Lingots et autres formes primaires

De section transversale rectangulaire:

Containing by weight less than 2.5% of nickel

Of square cross-section

Forgées

Rolled or obtained by continuous casting

Aciers inoxydables en lingots ou autres formes primaires; demi-produits en aciers inoxydables:

Autres:

Containing by weight 2.5% or more of nickel

Autres:

Rolled or obtained by continous casting

Autres:

Forgées

Simplement laminés à chaud, enroulés:

Consigned from Türkiye

D'une épaisseur de 4,75 mm ou plus mais n'excédant pas 10 mm:

Consigned from Türkiye

Containing by weight less than 2.5% of nickel

Autres

Containing by weight 2.5% or more of nickel

Autres

Consigned from Türkiye

D'une épaisseur inférieure à 3 mm:

Consigned from Türkiye

Containing by weight less than 2.5% of nickel

Autres

D'une épaisseur excédant 10 mm:

Containing by weight less than 2.5% of nickel

Containing by weight 2.5% or more of nickel

Autres

Consigned from Türkiye

D'une épaisseur de 3 mm ou plus mais inférieure à 4,75 mm:

Autres

Consigned from Türkiye

Simplement laminés à froid:

Consigned from Taiwan or Vietnam

Autres

Containing by weight 2.5% or more of nickel

Consigned from Türkiye

Containing by weight less than 2.5% of nickel

Consigned from Türkiye

D'une épaisseur excédant 1 mm mais inférieure à 3 mm:

Consigned from Taiwan or Vietnam

Autres

Consigned from Taiwan or Vietnam

Autres

Containing by weight 2.5% or more of nickel

Consigned from Türkiye

Containing by weight less than 2.5% of nickel

Consigned from Türkiye

D'une épaisseur inférieure à 0,5 mm:

Consigned from Taiwan or Vietnam

Autres

Consigned from Taiwan or Vietnam

Autres

Perforated

Consigned from Türkiye

Autres:

Consigned from Türkiye

Produits laminés plats en aciers inoxydables, d'une largeur inférieure à 600 mm:

D'une épaisseur de 4,75 mm ou plus:

Autres

Consigned from Türkiye

Simplement laminés à froid:

2.5% or more of nickel

Consigned from Türkiye

Less than 2.5% of nickel

Consigned from Türkiye

Of a thickness exceeding 0.35 mm but of less than 3 mm, containing by weight

Consigned from Taiwan or Vietnam

Autres

Consigned from Taiwan or Vietnam

Autres

2.5% or more of nickel

Consigned from Türkiye

Less than 2.5% of nickel

Consigned from Türkiye

Autres:

Consigned from Taiwan or Vietnam

Autres

Consigned from Taiwan or Vietnam

Autres

Containing by weight 2.5% or more of nickel

Barres et profilés en aciers inoxydables:

De section circulaire:

2.5% or more of nickel

Of a diameter of less than 80 mm, containing by weight

Less than 2.5% of nickel

Containing by weight 2.5% or more of nickel

Barres simplement obtenues ou parachevées à froid:

Of a diameter of 80 mm or more, containing by weight

Less than 2.5% of nickel

2.5% or more of nickel

Of a diameter of less than 25 mm, containing by weight

Less than 2.5% of nickel

2.5% or more of nickel

Autres barres:

2.5% or more of nickel

Autres:

Autres

Not further worked than hot-rolled, hot-drawn or extruded

Autres:

Autres

Containing by weight 2.5% or more of nickel

Autres

Containing by weight 13% or more but not more than 25% of chromium and 3.5% or more but not more than 6% of aluminium

Autres aciers alliés en lingots ou autres formes primaires; demi-produits en autres aciers alliés:

Of tool steel

Autres:

Of rectangular (including square) cross-section

Hot-rolled or obtained by continuous casting

Autres:

Hot-rolled or obtained by continuous casting

En aciers à coupe rapide

Autres

Forgées

Hot-rolled or obtained by continuous casting

Autres

Autres aciers alliés en lingots ou autres formes primaires; demi-produits en autres aciers alliés:

Of tool steel

Autres:

Of rectangular (including square) cross-section

Hot-rolled or obtained by continuous casting

Autres:

Hot-rolled or obtained by continuous casting

En aciers à coupe rapide

Autres

Forgées

Hot-rolled or obtained by continuous casting

Autres

Produits laminés plats en autres aciers alliés, d'une largeur de 600 mm ou plus:

À grains orientés:

With a maximum core loss not higher than 0.9 w/kg

With a maximum core loss higher than 1.05 w/kg

Autres:

Products clad, plated or coated, not in coils, without patterns in relief, of a thickness exceeding 10 mm and products clad, plated or coated, not in coils, without patterns in relief, of a thickness of 4.75 mm or more but not exceeding 10 mm and of a width of 2 050 mm or more

Cold-rolled

Of tool steel

Not further worked than rolled; not further worked than surface-treated, including cladding or simply cut into shapes other than rectangular (including square)

Autres

Of tool steel

Autres:

D'une épaisseur de 4,75 mm ou plus mais n'excédant pas 10 mm:

Autres

Autres, simplement laminés à froid:

Not further worked than rolled; not further worked than surface-treated, including cladding or simply cut into shapes other than rectangular (including square)

Autres

Zingués électrolytiquement:

Autres

Aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips

Autres

Not further worked than surface-treated, including cladding or simply cut into shapes other than rectangular (including square)

Other, aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips

Autres

Plated or coated by hot dip galvanisation with magnesium and/or aluminium, whether or not alloyed with zinc, whether or not alloyed with silicon; chemically passivated; with additional surface treatment such as oiling or sealing; containing by weight: not more than 0.5% of carbon, not more than 1.1% of aluminium, not more than 0.12% of niobium, not more than 0.17% of titanium and not more than 0.15% of vanadium; presented in coils, cut-to-length sheets and narrow strips

Autres:

Other, aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips

Autres

En aciers au silicium dits "magnétiques":

Of a width exceeding 500 mm

With a maximum core loss not higher than 0.9 w/kg

With a maximum core loss higher than 1.05 w/kg

Of a width not exceeding 500 mm

With a maximum core loss not higher than 0.9 w/kg

With a maximum core loss higher than 1.05 w/kg

Autres:

Products clad, plated or coated

Of a width not exceeding 350 mm and of a thickness of 50 mm or more

Autres:

Of a width not exceeding 500 mm

Autres:

Of tool steel

D'une épaisseur de 4,75 mm ou plus:

Autres

Simplement laminés à froid:

Of a width not exceeding 500 mm

Zingués électrolytiquement

Aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips

Autres

Of a width not exceeding 500 mm, hot-rolled, not further worked than clad; of a width exceeding 500 mm, not further worked than surface-treated, including cladding

Plated or coated by hot dip galvanisation with magnesium and/or aluminium, whether or not alloyed with zinc, whether or not alloyed with silicon; chemically passivated; with or without additional surface treatment such as oiling or sealing; containing by weight: not more than 0.5% of carbon, not more than 1.1% of aluminium, not more than 0.12% of niobium, not more than 0.17% of titanium and not more than 0.15% of vanadium; presented in coils, cut-to-length sheets and narrow strips

Autres:

Plated or coated by hot dip galvanisation with magnesium and/or aluminium, whether or not alloyed with zinc, whether or not alloyed with silicon; chemically passivated; with or without additional surface treatment such as oiling or sealing; containing by weight: not more than 0.5% of carbon, not more than 1.1% of aluminium, not more than 0.12% of niobium, not more than 0.17% of titanium and not more than 0.15% of vanadium; presented in coils, cut-to-length sheets and narrow strips

Autres

En aciers à coupe rapide

Autres:

Containing by weight 0.9% or more but not more than 1.15% of carbon, 0.5% or more but not more than 2% of chromium and, if present, not more than 0.5% of molybdenum

Barres et profilés en autres aciers alliés; barres creuses pour le forage en aciers alliés ou non alliés:

Not further worked than hot-rolled, hot-drawn or extruded; hot-rolled, hot-drawn or extruded, not further worked than clad

Autres

Of rectangular (other than square) cross-section, hot-rolled on four faces

Autres:

Autres

Not further worked than hot-rolled, hot-drawn or extruded; hot-rolled, hot-drawn or extruded, not further worked than clad

Autres barres, simplement laminées ou filées à chaud:

Containing by weight 0.9% or more but not more than 1.15% of carbon, 0.5% or more but not more than 2% of chromium and, if present, not more than 0.5% of molybdenum

Autres

Of circular cross-section, of a diameter of

Less than 80 mm

Autres

Of tool steel

Autres barres, simplement obtenues ou parachevées à froid:

Containing by weight 0.9% or more but not more than 1.15% of carbon, 0.5% or more but not more than 2% of chromium and, if present, not more than 0.5% of molybdenum

Of circular cross-section, of a diameter of

Less than 80 mm

Autres barres:

Hot-rolled, hot-drawn or extruded, not further worked than clad

Autres:

Autres

Not further worked than hot-rolled, hot-drawn or extruded

Hot-rolled, hot-drawn or extruded, not further worked than clad

Barres creuses pour le forage

En aciers silicomanganeux

En aciers à coupe rapide

Autres