HS Codes - 72: Iron and steel:

7201
Pig iron and spiegeleisen in pigs, blocks or other primary forms
7201.10
Non-alloy pig iron containing by weight 0.5 % or less of phosphorus
7201.10.010
- Containing less than 1.2 % by weight of silicon and not more than 0.04 % by weight of phosphorus
7201.A
- Other
7201.10.091
-- Containing by weight less than 1.6 % of silicon
7201.10.099
-- Other
7201.20.000
Non-alloy pig iron containing by weight more than 0.5 % of phosphorus
7201.50.000
Alloy pig iron; spiegeleisen
7202
Ferro-alloys
7202.A
Ferro-manganese:
7202.11.000
Containing by weight more than 2 % of carbon
7202.19.000
Other
7202.B
Ferro-silicon:
7202.21.000
Containing by weight more than 55 % of silicon
7202.29.000
Other
7202.30.000
Ferro-silico-manganese
7202.C
Ferro-chromium:
7202.41.000
Containing by weight more than 4 % of carbon
7202.49.000
Other
7202.50.000
Ferro-silico-chromium
7202.60
Ferro-nickel
7202.60.010
- Containing by weight less than 33 % of nickel
7202.60.090
- Other
7202.70.000
Ferro-molybdenum
7202.80
Ferro-tungsten and ferro-silico-tungsten
7202.80.010
1 Ferro-tungsten
7202.80.020
2 Ferro-silico-tungsten
7202.D
Other:
7202.91.000
Ferro-titanium and ferro-silico-titanium
7202.92.000
Ferro-vanadium
7202.93.000
Ferro-niobium
7202.99
Other
7202.99.010
- Ferro-phosphorus
7202.99.090
- Other
7203
Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99.94 %, in lumps, pellets or similar forms
7203.10.000
Ferrous products obtained by direct reduction of iron ore
7203.90.000
Other
7204
Ferrous waste and scrap; remelting scrap ingots of iron or steel
7204.10.000
Waste and scrap of cast iron
7204.A
Waste and scrap of alloy steel:
7204.21.000
Of stainless steel
7204.29.000
Other
7204.30.000
Waste and scrap of tinned iron or steel
7204.B
Other waste and scrap:
7204.41.000
Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles
7204.49.000
Other
7204.50
Remelting scrap ingots
7204.50.010
1 Of alloy steel
7204.50.020
2 Other
7205
Granules and powders, of pig iron, spiegeleisen, iron or steel
7205.10.000
Granules
7205.A
Powders:
7205.21
Of alloy steel
7205.21.010
- Containing not less than 1% but less than 5 % by weight of nickel
7205.21.090
- Other
7205.29.000
Other
72.A
II.- IRON AND NON-ALLOY STEEL
7206
Iron and non-alloy steel in ingots or other primary forms (excluding iron of heading 72.03)
7206.10
Ingots
7206.10.010
1 Containing by weight less than 0.6 % of carbon
7206.10.020
2 Other
7206.90
Other
7206.90.010
1 Containing by weight less than 0.6 % of carbon
7206.90.020
2 Other
7207
Semi-finished products of iron or non-alloy steel
7207.A
Containing by weight less than 0.25 % of carbon:
7207.11.000
Of rectangular (including square) cross-section, the width measuring less than twice the thickness
7207.12.000
Other, of rectangular (other than square) cross-section
7207.19.000
Other
7207.20
Containing by weight 0.25 % or more of carbon
7207.20.A
1 Containing by weight less than 0.6 % of carbon
7207.20.011
- Billets
7207.20.012
- Slabs
7207.20.019
- Other
7207.20.020
2 Other
7208
Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated
7208.10
In coils, not further worked than hot-rolled, with patterns in relief
7208.10.010
1 Containing by weight less than 0.6 % of carbon
7208.10.A
2 Other
7208.10.021
(1)Of a thickness of less than 3 mm and having a minimum yield point of 275 MPa or of a thickness of 3 mm or more and having a minimum yield point of 355 MPa
7208.10.029
(2)Other
7208.A
Other, in coils, not further worked than hot-rolled, pickled:
7208.25
Of a thickness of 4.75 mm or more
7208.25.A
1 Containing by weight less than 0.6 % of carbon
7208.25.011
- Of a thickness of less than 6 mm
7208.25.019
- Other
7208.25.B
2 Other
7208.25.020
(1)Having a minimum yield point of 355 MPa
7208.25.030
(2)Other
7208.26
Of a thickness of 3 mm or more but less than 4.75 mm
7208.26.A
1 Containing by weight less than 0.6 % of carbon
7208.26.011
- High tensile steel of a tensile strength of 490 MPa or more
7208.26.019
- Other
7208.26.B
2 Other
7208.26.021
(1)Having a minimum yield point of 355 MPa
7208.26.029
(2)Other
7208.27
Of a thickness of less than 3 mm
7208.27.A
1 Containing by weight less than 0.6 % of carbon
7208.27.011
- High tensile steel of a tensile strength of 490 MPa or more
7208.27.019
- Other
7208.27.B
2 Other
7208.27.021
(1)Having a minimum yield point of 275 MPa
7208.27.029
(2)Other
7208.B
Other, in coils, not further worked than hot-rolled:
7208.36
Of a thickness exceeding 10 mm
7208.36.010
1 Containing by weight less than 0.6% of carbon
7208.36.A
2 Other
7208.36.021
(1)Having a minimum yield point of 355 MPa
7208.36.029
(2)Other
7208.37
Of a thickness of 4.75 mm or more but not exceeding 10 mm
7208.37.A
1 Containing by weight less than 0.6 % of carbon
7208.37.011
- Of a thickness of less than 6 mm
7208.37.019
- Other
7208.37.B
2 Other
7208.37.020
(1)Having a minimum yield point of 355 MPa
7208.37.030
(2)Other
7208.38
Of a thickness of 3 mm or more but less than 4.75 mm
7208.38.010
1 Containing by weight less than 0.6% of carbon
7208.38.A
2 Other
7208.38.021
(1)Having a minimum yield point of 355 MPa
7208.38.029
(2)Other
7208.39
Of a thickness of less than 3 mm
7208.39.010
1 Containing by weight less than 0.6 % of carbon
7208.39.A
2 Other
7208.39.021
(1)Having a minimum yield point of 275 MPa
7208.39.029
(2)Other
7208.40
Not in coils, not further worked than hot-rolled, with patterns in relief
7208.40.010
1 Containing by weight less than 0.6 % of carbon
7208.40.A
2 Other
7208.40.020
(1)Of a thickness of less than of 3 mm and having a minimum yield point of 275 MPa or of a thickness of 3 mm or more and having a minimum yield point of 355 MPa
7208.40.030
(2)Other
7208.C
Other, not in coils, not further worked than hot-rolled:
7208.51
Of a thickness exceeding 10 mm
7208.51.A
1 Containing by weight less than 0.6 % of carbon
7208.51.011
- Of a thickness of not exceeding 50 mm
7208.51.019
- Of a thickness exceeding 50 mm
7208.51.B
2 Other
7208.51.B.A
(1)Having a minimum yield point of 355 MPa
7208.51.021
- Of a thickness of not exceeding 50 mm
7208.51.029
- Of a thickness exceeding 50 mm
7208.51.B.B
(2)Other
7208.51.031
- Of a thickness of not exceeding 50 mm
7208.51.039
- Of a thickness exceeding 50 mm
7208.52
Of a thickness of 4.75 mm or more but not exceeding 10 mm
7208.52.A
1 Containing by weight less than 0.6 % of carbon
7208.52.011
- Of a thickness of less than 6 mm
7208.52.019
- Other
7208.52.B
2 Other
7208.52.B.A
(1)Having a minimum yield point of 355 MPa
7208.52.021
- Of a thickness of less than 6 mm
7208.52.029
- Other
7208.52.B.B
(2)Other
7208.52.031
- Of a thickness of less than 6 mm
7208.52.039
- Other
7208.53
Of a thickness of 3 mm or more but less than 4.75 mm
7208.53.010
1 Containing by weight less than 0.6 % of carbon
7208.53.A
2 Other
7208.53.021
(1)Having a minimum yield point of 355 MPa
7208.53.029
(2)Other
7208.54
Of a thickness of less than 3 mm
7208.54.010
1 Containing by weight less than 0.6 % of carbon
7208.54.A
2 Other
7208.54.021
(1)Having a minimum yield point of 275 MPa
7208.54.029
(2)Other
7208.90.000
Other
7209
Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated
7209.A
In coils, not further worked than cold-rolled (cold-reduced):
7209.15
Of a thickness of 3 mm or more
7209.15.010
1 Containing by weight less than 0.6 % of carbon
7209.15.A
2 Other
7209.15.021
(1)Having a minimum yield point of 355 MPa
7209.15.029
(2)Other
7209.16
Of a thickness exceeding 1mm but less than 3 mm
7209.16.A
1 Containing by weight less than 0.6% of carbon
7209.16.011
- High tensile steel of a tensile strength of 340 MPa or more
7209.16.019
- Other
7209.16.B
2 Other
7209.16.021
(1)Having a minimum yield point of 275 MPa
7209.16.029
(2)Other
7209.17
Of a thickness of 0.5 mm or more but not exceeding 1 mm
7209.17.A
1 Containing by weight less than 0.6 % of carbon
7209.17.011
- High tensile steel of a tensile strength of 340 MPa or more
7209.17.019
- Other
7209.17.B
2 Other
7209.17.021
(1)Having a minimum yield point of 275 MPa
7209.17.029
(2)Other
7209.18
Of a thickness of less than 0.5 mm
7209.18.010
1 Containing by weight less than 0.6 % of carbon
7209.18.A
2 Other
7209.18.021
(1)Having a minimum yield point of 275 MPa
7209.18.029
(2)Other
7209.B
Not in coils, not further worked than cold-rolled (cold-reduced):
7209.25
Of a thickness of 3 mm or more
7209.25.010
1 Containing by weight less than 0.6 % of carbon
7209.25.A
2 Other
7209.25.021
(1)Having a minimum yield point of 355 MPa
7209.25.029
(2)Other
7209.26
Of a thickness exceeding 1mm but less than 3 mm
7209.26.010
1 Containing by weight less than 0.6 % of carbon
7209.26.A
2 Other
7209.26.021
(1)Having a minimum yield point of 275 MPa
7209.26.029
(2)Other
7209.27
Of a thickness of 0.5 mm or more but not exceeding 1 mm
7209.27.010
1 Containing by weight less than 0.6 % of carbon
7209.27.A
2 Other
7209.27.021
(1)Having a minimum yield point of 275 MPa
7209.27.029
(2)Other
7209.28
Of a thickness of less than 0.5 mm
7209.28.010
1 Containing by weight less than 0.6 % of carbon
7209.28.A
2 Other
7209.28.021
(1)Having a minimum yield point of 275 MPa
7209.28.029
(2)Other
7209.90.000
Other
7210
Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated
7210.A
Plated or coated with tin:
7210.11.000
Of a thickness of 0.5 mm or more
7210.12.000
Of a thickness of less than 0.5 mm
7210.20.000
Plated or coated with lead, including terne-plate
7210.30
Electrolytically plated or coated with zinc
7210.30.010
1 Containing by weight less than 0.6% of carbon
7210.30.A
2 Other
7210.30.021
(1)Of steel of a thickness of less than 3 mm and having a minimum yield point of 275 MPa or of a thickness of 3 mm or more and having a minimum yield point of 355 MPa
7210.30.029
(2)Other
7210.B
Otherwise plated or coated with zinc:
7210.41.000
Corrugated
7210.49
Other
7210.49.010
- Hot-dip galvannealed, of plated or coated layers undergone a homogeneous alloying process (containing by weight of 7 % or more of iron in the entire layers)
7210.49.090
- Other
7210.50
Plated or coated with chromium oxides or with chromium and chromium oxides
7210.50.010
- Tinfree steel
7210.50.090
- Other
7210.C
Plated or coated with aluminium:
7210.61.000
Plated or coated with aluminium-zinc alloys
7210.69.000
Other
7210.70.000
Painted, varnished or coated with plastics
7210.90
Other
7210.90.010
1 Containing by weight less than 0.6 % of carbon
7210.90.020
2 Other
7211
Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated
7211.A
Not further worked than hot-rolled:
7211.13
Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief
7211.13.010
1 Containing by weight less than 0.6 % of carbon
7211.13.A
2 Other
7211.13.021
(1)Having a minimum yield point of 355 MPa
7211.13.029
(2)Other
7211.14
Other, of a thickness of 4.75 mm or more
7211.14.010
1 Containing by weight less than 0.6 % of carbon
7211.14.A
2 Other
7211.14.021
(1)Having a minimum yield point of 355 MPa
7211.14.029
(2)Other
7211.19
Other
7211.19.010
1 Containing by weight less than 0.6 % of carbon
7211.19.A
2 Other
7211.19.021
(1)Of a thickness of less than 3 mm and having a minimum yield point of 275 MPa or of a thickness of 3 mm or more and having a minimum yield point of 355 MPa
7211.19.029
(2)Other
7211.B
Not further worked than cold-rolled (cold-reduced):
7211.23.000
Containing by weight less than 0.25 % of carbon
7211.29
Other
7211.29.010
1 Of a thickness of less than 3 mm and having a minimum yield point of 275 MPa or of a thickness of 3 mm or more and having a minimum yield point of 355 MPa
7211.29.090
2 Other
7211.90.000
Other
7212
Flat-rolled products of iron or non-alloy steel, of a width of less than 600mm, clad, plated or coated
7212.10.000
Plated or coated with tin
7212.20
Electrolytically plated or coated with zinc
7212.20.010
1 Containing by weight less than 0.6 % of carbon
7212.20.A
2 Other
7212.20.021
(1)Of steel of a thickness of less than 3 mm and having a minimum yield point of 275 MPa or of a thickness of 3 mm or more and having a minimum yield point of 355 MPa
7212.20.029
(2)Other
7212.30.000
Otherwise plated or coated with zinc
7212.40.000
Painted, varnished or coated with plastics
7212.50
Otherwise plated or coated
7212.50.010
- Tinfree steel
7212.50.090
- Other
7212.60
Clad
7212.60.010
1 Containing by weight less than 0.6 % of carbon
7212.60.020
2 Other
7213
Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel
7213.10.000
Containing indentations, ribs, grooves or other deformations produced during the rolling process
7213.20.000
Other, of free-cutting steel
7213.A
Other:
7213.91
Of circular cross-section measuring less than 14 mm in diameter
7213.91.A
1 Containing by weight less than 0.6 % of carbon
7213.91.B
- Containing by weight less than 0.25 % of carbon
7213.91.011
-- Measuring less than 6 mm in diameter
7213.91.019
-- Other
7213.91.020
- Other
7213.91.090
2 Other
7213.99
Other
7213.99.020
1 Containing by weight less than 0.6 % of carbon
7213.99.090
2 Other
7214
Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling
7214.10.000
Forged
7214.20.000
Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling
7214.30.000
Other, of free-cutting steel
7214.A
Other:
7214.91
Of rectangular (other than square) cross-section
7214.91.020
1 Containing by weight less than 0.6 % of carbon
7214.91.090
2 Other
7214.99
Other
7214.99.020
1 Containing by weight less than 0.6 % of carbon
7214.99.090
2 Other
7215
Other bars and rods of iron or non-alloy steel
7215.10.000
Of free-cutting steel, not further worked than cold-formed or cold-finished
7215.50
Other, not further worked than cold-formed or cold-finished
7215.50.A
1 Containing by weight less than 0.6 % of carbon
7215.50.010
- Containing by weight less than 0.25 % of carbon
7215.50.019
- Other
7215.50.090
2 Other
7215.90
Other
7215.90.010
1 Containing by weight less than 0.6% of carbon
7215.90.020
2 Other
7216
Angles, shapes and sections of iron or non-alloy steel
7216.10.000
U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm
7216.A
L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm:
7216.21.000
L sections
7216.22.000
T sections
7216.B
U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded of a height of 80 mm or more:
7216.31.000
U sections
7216.32.000
I sections
7216.33.000
H sections
7216.40.000
L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more
7216.50.000
Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded
7216.C
Angles, shapes and sections, not further worked than cold-formed or cold-finished :
7216.61.000
Obtained from flat-rolled products
7216.69.000
Other
7216.D
Other:
7216.91.000
Cold-formed or cold-finished from flat-rolled products
7216.99.000
Other
7217
Wire of iron or non-alloy steel
7217.10
Not plated or coated, whether or not polished
7217.10.A
1 Containing by weight less than 0.6 % of carbon
7217.10.010
- Containing by weight less than 0.25 % of carbon
7217.10.019
- Other
7217.10.090
2 Other
7217.20
Plated or coated with zinc
7217.20.A
1 Containing by weight less than 0.6 % of carbon
7217.20.B
- Containing by weight less than 0.25 % of carbon
7217.20.010
-- Of any cross sectional dimension not exceeding 1.5 mm
7217.20.011
-- Other, plated or coated with zinc specified in Subheading Note 1 (a) to Chapter 79, of circular or oval cross-section
7217.20.019
-- Other
7217.20.090
- Other
7217.20.099
2 Other
7217.30
Plated or coated with other base metals
7217.30.A
1 Containing by weight less than 0.6 % of carbon
7217.30.B
- Containing by weight less than 0.25 % of carbon
7217.30.011
-- Solid wire for gas sealed arc welding
7217.30.019
-- Other
7217.30.090
- Other
7217.30.099
2 Other
7217.90
Other
7217.90.A
1 Containing by weight less than 0.6 % of carbon
7217.90.011
- Containing by weight less than 0.25 % of carbon
7217.90.019
- Other
7217.90.090
2 Other
72.B
III.- STAINLESS STEEL
7218
Stainless steel in ingots or other primary forms; semi-finished products of stainless steel
7218.10.000
Ingots and other primary forms
7218.A
Other:
7218.91.000
Of rectangular (other than square) cross-section
7218.99.000
Other
7219
Flat-rolled products of stainless steel, of a width of 600 mm or more
7219.A
Not further worked than hot-rolled, in coils:
7219.11.000
Of a thickness exceeding 10 mm
7219.12
Of a thickness of 4.75 mm or more but not exceeding 10 mm
7219.12.011
- Of chrome series, not containing nickel or containing by weight not exceeding 0.6 % of nickel, whether or not containing other elements
7219.A.A
- Of nickel series, containing by weight more than 0.6 % of nickel, whether or not containing other elements
7219.A.B
-- Containing by weight less than 7 % of nickel
7219.12.027
--- Containing by weight not exceeding 6 % of nickel and 3 % or more of Manganese
7219.12.028
--- Other
7219.12.029
-- Other
7219.13
Of a thickness of 3 mm or more but less than 4.75 mm
7219.13.011
- Of chrome series, not containing nickel or containing by weight not exceeding 0.6 % of nickel, whether or not containing other elements
7219.A.C
- Of nickel series, containing by weight more than 0.6 % of nickel, whether or not containing other elements
7219.A.D
-- Containing by weight less than 7 % of nickel
7219.13.027
---Containing by weight not exceeding 6 % of nickel and 3 % or more of Manganese
7219.13.028
--- Other
7219.13.029
-- Other
7219.14.000
Of a thickness of less than 3 mm
7219.B
Not further worked than hot-rolled, not in coils:
7219.21.000
Of a thickness exceeding 10 mm
7219.22.000
Of a thickness of 4.75 mm or more but not exceeding 10 mm
7219.23.000
Of a thickness of 3 mm or more but less than 4.75 mm
7219.24.000
Of a thickness of less than 3 mm
7219.C
Not further worked than cold-rolled (cold-reduced):
7219.31.000
Of a thickness of 4.75 mm or more
7219.32
Of a thickness of 3 mm or more but less than 4.75 mm
7219.32.011
- Of chrome series, not containing nickel or containing by weight not exceeding 0.6 % of nickel, whether or not containing other element
7219.C.A
- Of nickel series, containing by weight more than 0.6 % of nickel, whether or not containing other elements
7219.C.B
-- Containing by weight less than 7 % of nickel
7219.32.027
--- Containing by weight not exceeding 6 % of nickel and 3 % or more of Manganese
7219.32.028
--- Other
7219.32.022
-- Containing by weight 7 % or more but less than 10 % of nickel
7219.32.023
--Containing by weight more than 10 % of nickel
7219.33
Of a thickness exceeding 1 mm but less than 3 mm
7219.C.C
- Of chrome series, not containing nickel or containing by weight not exceeding 0.6 % of nickel, whether or not containing other element
7219.33.012
-- Containing by weight less than 12 % of chromium
7219.33.013
-- Other
7219.C.D
- Of nickel series, containing by weight more than 0.6 % of nickel, whether or not containing other elements
7219.C.E
-- Containing by weight less than 7 % of nickel
7219.33.027
--- Containing by weight not exceeding 6 % of nickel and 3 % or more of Manganese
7219.33.028
--- Other
7219.33.022
-- Containing by weight 7 % or more but less than 10 % of nickel
7219.33.023
-- Containing by weight 10 % or more of nickel
7219.34
Of a thickness of 0.5 mm or more but not exceeding 1 mm
7219.C.F
- Of chrome series, not containing nickel or containing by weight not exceeding 0.6 % of nickel, whether or not containing other element
7219.34.012
-- Containing by weight less than 12 % of chromium
7219.34.013
-- Other
7219.C.G
- Of nickel series, containing by weight more than 0.6 % of nickel, whether or not containing other elements
7219.C.H
-- Containing by weight less than 7 % of nickel
7219.34.027
--- Containing by weight not exceeding 6 % of nickel and 3 % or more of Manganese
7219.34.028
--- Other
7219.34.022
-- Containing by weight 7 % or more but less than 10 % of nickel
7219.34.023
-- Containing by weight 10 % or more of nickel
7219.35
Of a thickness of less than 0.5 mm
7219.35.011
- Of chrome series, not containing nickel or containing by weight not exceeding 0.6 % of nickel, whether or not containing other element
7219.C.I
- Of nickel series, containing by weight more than 0.6 % of nickel, whether or not containing other elements
7219.C.J
-- Containing by weight less than 7 % of nickel
7219.35.027
--- Containing by weight not exceeding 6 % of nickel and 3 % or more of Manganese
7219.35.028
--- Other
7219.35.022
-- Containing by weight 7 % or more but less than 10 % of nickel
7219.35.023
-- Containing by weight 10 % or more of nickel
7219.90.000
Other
7220
Flat-rolled products of stainless steel, of a width of less than 600 mm
7220.A
Not further worked than hot-rolled:
7220.11.000
Of a thickness of 4.75 mm or more
7220.12.000
Of a thickness of less than 4.75 mm
7220.20
Not further worked than cold-rolled (cold-reduced)
7220.20.011
- Of chrome series, not containing nickel or containing by weight not exceeding 0.6 % of nickel, whether or not containing other element
7220.B
- Of nickel series, containing by weight more than 0.6 % of nickel, whether or not containing other elements
7220.C
-- Containing by weight less than 7 % of nickel
7220.20.027
--- Containing by weight not exceeding 6 % of nickel and 3 % or more of Manganese
7220.20.028
--- Other
7220.20.029
-- Other
7220.90.000
Other
7221.00.000
Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel
7222
Other bars and rods of stainless steel; angles, shapes and sections of stainless steel
7222.A
Bars and rods, not further worked than hot-rolled, hot-drawn or extruded:
7222.11.000
Of circular cross-section
7222.19.000
Other
7222.20.000
Bars and rods, not further worked than cold-formed or cold-finished
7222.30.000
Other bars and rods
7222.40.000
Angles, shapes and sections
7223.00.000
Wire of stainless steel
72.C
IV.- OTHER ALLOY STEEL; HOLLOW DRILL BARS AND RODS, OF ALLOY OR NON-ALLOY STEEL
7224
Other alloy steel in ingots or other primary forms; semi-finished products of other alloy steel
7224.10
Ingots and other primary forms
7224.10.010
1 Of high speed steel
7224.10.020
2 Of alloy tool steel, containing by weight not less than 0.5 %, separately or together, of tungsten or molybdenum
7224.10.030
3 Other
7224.90
Other
7224.90.010
1 Of high speed steel
7224.90.020
2 Of alloy tool steel
7224.90.030
3 Other
7225
Flat-rolled products of other alloy steel, of a width of 600 mm or more
7225.A
Of silicon-electrical steel:
7225.11.000
Grain-oriented
7225.19.000
Other
7225.30
Other, not further worked than hot-rolled, in coils
7225.30.100
1 Of alloy tool steel
7225.30.200
2 Of high speed steel
7225.30.A
3 Other
7225.30.910
- Pickled
7225.30.990
- Other
7225.40
Other, not further worked than hot-rolled, not in coils
7225.40.100
1 Of alloy tool steel
7225.40.200
2 Of high speed steel
7225.40.A
3 Other
7225.40.910
- Containing by weight 0.0008% or more of boron, less than basis of other elements listed in Note 1 (f) to this Chapter
7225.40.990
- Other
7225.50
Other, not further worked than cold-rolled (cold-reduced)
7225.50.100
1 Of alloy tool steel
7225.50.200
2 Of high speed steel
7225.50.900
3 Other
7225.B
Other:
7225.91
Electrolytically plated or coated with zinc
7225.91.100
1 Bimetal, clad or combined, containing by weight more than 10 % of nickel
7225.91.200
2 Of alloy tool steel
7225.91.300
3 Of high speed steel
7225.91.900
4 Other
7225.92
Otherwise plated or coated with zinc
7225.92.100
1 Bimetal, clad or combined, containing by weight more than 10 % of nickel
7225.92.200
2 Of alloy tool steel
7225.92.300
3 Of high speed steel
7225.92.A
4 Other
7225.92.910
- Hot-dip galvannealed, of plated or coated layers undergone a homogeneous alloying process (containing by weight of 7 % or more of iron in the entire layers)
7225.92.990
- Other
7225.99
Other
7225.99.100
1 Bimetal, clad or combined, containing by weight more than 10 % of nickel
7225.99.200
2 Of alloy tool steel
7225.99.300
3 Of high speed steel
7225.99.900
4 Other
7226
Flat-rolled products of other alloy steel, of a width of less than 600 mm
7226.A
Of silicon-electrical steel:
7226.11.000
Grain-oriented
7226.19.000
Other
7226.20.000
Of high speed steel
7226.B
Other:
7226.91
Not further worked than hot-rolled
7226.91.010
1 Of alloy tool steel
7226.91.020
2 Other
7226.92
Not further worked than cold-rolled (cold-reduced)
7226.92.010
1 Of alloy tool steel
7226.92.020
2 Other
7226.99
Other
7226.99.A
1 Bimetal, clad or combined, containing by weight more than 10% of nickel
7226.99.110
- Plated or coated with zinc
7226.99.190
- Other
7226.99.200
2 Of alloy tool steel
7226.99.900
3 Other
7227
Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel
7227.10.000
Of high speed steel
7227.20.000
Of silico-manganese steel
7227.90
Other
7227.90.010
1 Of alloy tool steel
7227.90.A
2 Other
7227.90.021
- Containing by weight 0.0008% or more of boron, less than basis of other elements listed in Note 1 (f) to this Chapter
7227.90.029
- Other
7228
Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel
7228.10.000
Bars and rods, of high speed steel
7228.20.000
Bars and rods, of silico-manganese steel
7228.30
Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded
7228.30.010
1 Of alloy tool steel
7228.30.020
2 Other
7228.40
Other bars and rods, not further worked than forged
7228.40.010
1 Of alloy tool steel
7228.40.020
2 Other
7228.50
Other bars and rods, not further worked than cold-formed or cold-finished
7228.50.010
1 Of alloy tool steel
7228.50.020
2 Other
7228.60
Other bars and rods
7228.60.010
1 Of alloy tool steel
7228.60.020
2 Other
7228.70
Angles, shapes and sections
7228.70.010
1 Of alloy tool steel
7228.70.020
2 Other
7228.80.000
Hollow drill bars and rods
7229
Wire of other alloy steel
7229.20.000
Of silico-manganese steel
7229.90
Other
7229.90.100
1 Of alloy tool steel
7229.90.200
2 Of high speed steel
7229.90.A
3 Other
7229.90.910
- Solid wire for gas sealed arc welding
7229.90.920
ツ−Plated or coated with zinc specified in Subheading Note 1 (a) to Chapter 79, containing by weight 0.0008% or more but not exceeding 0.007% of boron, less than proportions of elements other than boron listed in Note 1 (f) to this Chapter, less than 0.25% of carbon, of circular or oval cross-section, of any cross sectional dimension exceeding 1.5mm
7229.90.990
- Other

Need help to the find appropriate HS Code ?