HS Codes - 73: Articles of iron or steel:

Sheet piling

Railway or tramway track construction material of iron or steel, the following: rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers (cross-ties), fish-plates, chairs, chair wedges, sole plates (base plates), rail clips, bedplates, ties and other material specialised for jointing or fixing rails:

Current-conducting, with parts of non-ferrous metal

New:

Of a weight per metre of 36 kg or more

Grooved rails

Used

Fish-plates and sole plates

Tubes, pipes and hollow profiles, of cast iron:

Of ductile cast iron (also known as spheroidal graphite cast iron), with the exclusion of tubes and pipes of ductile cast iron without internal and external coating (‘bare pipes’)

Other

Tubes and pipes of ductile cast iron (also known as spheroidal graphite cast iron), with the exclusion of tubes and pipes of ductile cast iron without internal and external coating (‘bare pipes’)

Other

Line pipe of a kind used for oil or gas pipelines:

Of circular cross-section, of an external diameter not exceeding 406,4 mm and with a carbon equivalent value (cev) not exceeding 0,86 according to the international institute of welding (iiw) formula and chemical analysis

Other:

Of circular cross-section and with a carbon equivalent value (cev) not exceeding 0,86 according to the international institute of welding (iiw) formula and chemical analysis

Of an external diameter exceeding 168,3 mm but not exceeding 406,4 mm:

Other

Casing, tubing and drill pipe, of a kind used in drilling for oil or gas:

Of circular cross-section, of an external diameter not exceeding 406,4 mm and with a carbon equivalent value (cev) not exceeding 0,86 according to the international institute of welding (iiw) formula and chemical analysis

Other drill pipe:

Other

Of circular cross-section, of an external diameter not exceeding 406,4 mm and with a carbon equivalent value (cev) not exceeding 0,86 according to the international institute of welding (iiw) formula and chemical analysis

Other:

Of circular cross-section and with a carbon equivalent value (cev) not exceeding 0,86 according to the international institute of welding (iiw) formula and chemical analysis

Of an external diameter exceeding 168,3 mm but not exceeding 406,4 mm:

Other

Casings

Other, of circular cross-section, of iron or non-alloy steel:

Precision tubes:

Other

Of an external diameter not exceeding 406,4 mm and with a carbon equivalent value (cev) not exceeding 0,86 according to the international institute of welding (iiw) formula and chemical analysis

Other:

Of an external diameter not exceeding 406,4 mm and with a carbon equivalent value (cev) not exceeding 0,86 according to the international institute of welding (iiw) formula and chemical analysis

Other, of an external diameter:

With a carbon equivalent value (cev) not exceeding 0,86 according to the international institute of welding (iiw) formula and chemical analysis

Exceeding 168,3 mm but not exceeding 406,4 mm:

Other

Other, of circular cross-section, of stainless steel:

With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft

Other:

With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft

Of an external diameter exceeding 168,3 mm but not exceeding 406,4 mm:

Other

With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft

Other, of circular cross-section, of other alloy steel:

Straight and of uniform wall thickness, of alloy steel containing by weight not less than 0,9 % but not more than 1,15 % of carbon, not less than 0,5 % but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum

Precision tubes

Of an external diameter not exceeding 406,4 mm and with a carbon equivalent value (cev) not exceeding 0,86 according to the international institute of welding (iiw) formula and chemical analysis

Other:

Other:

With a carbon equivalent value (cev) not exceeding 0,86 according to the international institute of welding (iiw) formula and chemical analysis

Of an external diameter exceeding 168,3 mm but not exceeding 406,4 mm:

Other

Other:

Other:

Other

Line pipe of a kind used for oil or gas pipelines:

Other, longitudinally welded

Casing of a kind used in drilling for oil or gas

Longitudinally welded

Other

Line pipe of a kind used for oil or gas pipelines:

Other

Welded, of stainless steel

Other, welded, of circular cross-section, of iron or non-alloy steel:

Cold-drawn or cold-rolled (cold-reduced)

Other:

Plated or coated with zinc:

Other

Tubes and pipes of an external diameter not exceeding 168,3 mm

Other, of an external diameter:

Plated or coated with zinc:

Other

Tubes and pipes

Exceeding 168,3 mm but not exceeding 406,4 mm

Cold-drawn or cold-rolled (cold-reduced)

Other, welded, of circular cross-section, of other alloy steel:

Cold-drawn or cold-rolled (cold-reduced)

Other

Of square or rectangular cross-section:

Other:

With a wall thickness exceeding 2 mm

Of stainless steel

Other

Cast fittings:

Of a kind used in pressure systems

Other:

Threaded:

Bodies of compression fittings using iso din 13 metric thread

Other

Bodies of compression fittings using iso din 13 metric thread

Other

Unthreaded:

Of spheroidal graphite cast iron

Other

Flanges:

Other

Sleeves

For use in certain types of aircraft

Butt welding fittings:

Of austenitic stainless steel grades, corresponding to aisi types 304, 304l, 316, 316l, 316ti, 321 and 321h and their equivalent in the other norms, with a greatest external diameter not exceeding 406.. 4 mm and a wall thickness of 16 mm or less, with a roughness average (ra) of the internal surface not less than 0.. 8 micrometres, not flanged, whether or not finished:

For use in certain types of aircraft

Other:

Other

For use in certain types of aircraft

Other:

Consigned from malaysia:

Other

For use in certain types of aircraft

Other:

Other

Threaded:

Other

For use in certain types of aircraft

Other:

For use in certain types of aircraft

Threaded elbows, bends and sleeves:

Elbows and bends:

Other

With greatest external diameter not exceeding 609,6 mm:

For use in certain types of aircraft:

Other

Other threaded fittings

Consigned from taiwan

Consigned from sri lanka

Other

For use in certain types of aircraft:

Other

Other threaded fittings

Consigned from taiwan

Consigned from sri lanka

Other

Elbows and bends:

Other

For use in certain types of aircraft

Other:

For use in certain types of aircraft

Other:

With greatest external diameter not exceeding 609,6 mm:

Other

Other:

Consigned from taiwan

Consigned from sri lanka

Other

Structures (excluding prefabricated buildings of heading 9406) and parts of structures (for example, bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns), of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel:

Towers and lattice masts:

Other

Equipment for scaffolding, shuttering, propping or pit-propping

Solely or principally of sheet:

Other

Steel sections of wind towers for use in the assembly of utility scale tubular wind towers, whether or not tapered, whether or not including an embedded tower foundation section, whether or not joined with nacelles or rotor blades, designed to support the nacelle and rotor blades, for use in wind turbines with an electrical power generation capacity – either in onshore or offshore applications - equal to or in excess of 1.. 00 megawatt, and with a minimum height of 50 meters measured from the base of the tower to the bottom of the nacelle when the tower is fully assembled

Reservoirs, tanks, vats and similar containers for any material (other than compressed or liquefied gas), of iron or steel, of a capacity exceeding 300 l, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment:

For liquids:

Other, of a capacity:

Not exceeding 100 000 l

Tanks, casks, drums, cans, boxes and similar containers, for any material (other than compressed or liquefied gas), of iron or steel, of a capacity not exceeding 300 l, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment:

Kegs, vessels, drums, tanks, casks and similar containers, excluding cans and boxes, refillable, of stainless steel, with bodies approximately cylindrical in shape, with a wall thickness of 0,5 mm or more, of a kind used for materials other than crude oil and petroleum products, regardless of the type of finish, gauge or stainless steel grade, whether or not with additional components, whether or not painted or coated with other materials

Of a capacity of less than 50 l:

Cans of a kind used for preserving food

Other, with a wall thickness of:

0,5 mm or more

With a wall thickness of less than 0,5 mm

Kegs, vessels, drums, tanks, casks and similar containers, excluding cans and boxes, refillable, of stainless steel, with bodies approximately cylindrical in shape, of a kind used for materials other than crude oil and petroleum products, of a capacity of 4,5 litres or more, regardless of the type of finish, gauge or stainless steel grade, whether or not with additional components, whether or not painted or coated with other materials

Containers for compressed or liquefied gas, of iron or steel:

For a pressure of 165 bar or more, of a capacity of:

Containers intended for pressurisation, of iron or steel, in certain types of aircraft

20 l or more but not more than 50 l:

Other

Containers intended for pressurisation, of iron or steel, in certain types of aircraft

Other:

Other

Less than 1 000 l

Stranded wire, ropes, cables, plaited bands, slings and the like, of iron or steel, not electrically insulated:

Of stainless steel

Not exceeding 3 mm:

Other

Stranded wire:

With not more than 18 wires, of non-alloy steel, containing by weight 0,6 % or more of carbon

Coated:

With not more than 18 wires, of non-alloy steel, containing by weight 0,6% or more of carbon, excluding galvanised (but not with any further coating material) seven wire strands in which the diameter of the central wire is identical or less than 3% greater than the diameter of any of the 6 other wires

Other:

Other

Not coated or only plated or coated with zinc, with a maximum cross-sectional dimension:

Of steel:

Consigned from the republic of korea

Other

Of steel:

Consigned from the republic of korea

Other

Of steel:

Consigned from the republic of korea

Other

Of steel:

Consigned from the republic of korea

Other

Of steel:

Consigned from the republic of korea

Other

Barbed wire of iron or steel; twisted hoop or single flat wire, barbed or not, and loosely twisted double wire, of a kind used for fencing, of iron or steel

Woven cloth:

Other woven cloth, of stainless steel

Grill, netting and fencing, welded at the intersection, of wire with a maximum cross-sectional dimension of 3 mm or more and having a mesh size of 100 cm2 or more:

Other

Plated or coated with zinc

Other cloth, grill, netting and fencing:

Coated with plastics

Expanded metal

Articulated link chain and parts thereof:

Of a kind used for cycles and motorcycles

Other chain

Skid chain

Stud-link

Other

Anchors, grapnels and parts thereof, of iron or steel

Cold-pressed from wire:

Other

Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel:

Coach screws

Of stainless steel:

Other

For use in certain types of aircraft

Screw hooks and screw rings:

Other

Of stainless steel:

Other

Spaced-thread screws:

Other

For use in certain types of aircraft

Other screws and bolts, whether or not with their nuts or washers:

Other:

Of stainless steel:

Other

Of less than 800 mpa:

Other

For use in certain types of aircraft

With heads:

Of stainless steel:

Other

Self-locking bolts and nuts (of the type "hi-lok")

For use in certain types of aircraft

Hexagonal-socket heads:

For use in certain types of aircraft

Other:

Other:

Other

Of stainless steel:

Other

Of less than 800 mpa:

Other:

Other

For use in certain types of aircraft

Other:

Of stainless steel

Other:

Other

Of stainless steel:

For use in certain types of aircraft

Other:

Other

Blind rivet nuts:

Other

For use in certain types of aircraft

Other, with an inside diameter:

For use in certain types of aircraft

Exceeding 12 mm:

Other

For use in certain types of aircraft

Non-threaded articles:

For use in certain types of aircraft:

Other:

Other

Of stainless steel

Consigned from malaysia

Other washers:

Of stainless steel

Consigned from malaysia

Other:

Other:

Other

For use in certain types of aircraft

Cotters and cotter pins:

Tube or pipe restraint joint elements: -of stainless steel according to specification 17-4ph or of steel according to specification tool steel s7, -produced by metal injection moulding, -with a rockwell hardness of 38 hrc (± 1) or 53 hrc (+ 2/- 1), -measuring 7 mm x 4 mm x 5 mm or more, but not more than 40 mm x 20 mm x 10 mm

Other:

Other

Safety pins and other pins

Sewing, darning or embroidery needles

Springs and leaves for springs, of iron or steel:

Hot-worked:

For use in certain types of aircraft

Other:

Other

For use in certain types of aircraft

Helical springs:

For use in certain types of aircraft

Other:

For use in certain types of aircraft

Coil tension springs:

Other

For use in certain types of aircraft

Other:

For use in certain types of aircraft

Flat spiral spring of tempered steel, with: - a thickness of 2,67 mm or more, but not more than 4,11 mm, - a width of 12,57 mm or more, but not more than 16,01 mm, - a torque of 18,05 nm or more, but not more than 73,5 nm - an angle between the free position and the nominal position in exercise of 76° or more, but not more than 218°for use in the manufacture of tensioners for power transmission belts, for internal combustion engines

Discs springs:

Other

For use in certain types of aircraft

Stoves, ranges, grates, cookers (including those with subsidiary boilers for central heating), barbecues, braziers, gas rings, plate warmers and similar non-electric domestic appliances, and parts thereof, of iron or steel:

For gas fuel or for both gas and other fuels:

Other

Other, including appliances for solid fuel

For gas fuel or for both gas and other fuels

Other, including appliances for solid fuel

Radiators for central heating, not electrically heated, and parts thereof, of iron or steel; air heaters and hot-air distributors (including distributors which can also distribute fresh or conditioned air), not electrically heated, incorporating a motor-driven fan or blower, and parts thereof, of iron or steel:

Of cast iron

Other:

Other

Iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like

Of cast iron, not enamelled

Of stainless steel:

Other

Other:

Other

Sinks and washbasins, of stainless steel:

Other

Of cast iron, whether or not enamelled

Other, including parts:

Other

Of non-malleable cast iron:

Floor drains, roof drains, cleanouts and covers for cleanouts, subject to standard en 1253

Other:

Other

Grinding balls and similar articles for mills

Of cast iron:

Floor drains, roof drains, cleanouts and covers for cleanouts, subject to standard en 1253

Spheroidal graphite cast iron (also known as ductile cast iron), and parts thereof, of a kind used to:– cover ground or sub-surfaces systems, and/or openings to ground or sub-surface systems, and also– give access to ground or sub-surface systems and/or provide view to ground or sub-surface systems

Other:

Devices for cargo stowage and clamping freight, for use in certain types of aircraft

Other

Forged or stamped, but not further worked:

Other:

Other

For use in civil aircraft

Other

Ladders and steps

Reels for cables, piping and the like

Other articles of iron or steel:

Collars, flanges and other devices for fixing, jointing, clamping or spacing, for use in certain types of aircraft

Balls used in freight loading systems in certain types of aircraft

Closed-die forged:

Devices for cargo stowage and clamping freight, for use in certain types of aircraft

Steel ball neck, drop forged, machined, also heat treated or surface treated, having an angle between the centre of the conical head and the arm of less than 90° or having an angle between the centre of the ball and the arm of less than 90°, for use in the manufacture of trailer hitches for passenger cars

Sintered:

Devices for cargo stowage and clamping freight, for use in certain types of aircraft

Other

Collars, flanges and other devices for fixing, jointing, clamping or spacing, for use in certain types of aircraft

Ball bearings used in freight loading systems in certain types of aircraft

Vane ring of a kind for fastening gas flow control blades: -of iron or steel alloy, -with a heat resistance of 830 °c or more but not more than 1 050 °c, -with an external diameter of not more than 92 mm, -with holes for holding the gas flow control blades,for use in the manufacture of turbochargers

Other