HS Codes - 74: Copper and articles thereof:
7401.00.00.00 | Copper mattes; cement copper (precipitated copper) |
7402.00.00.00 | Unrefined copper; copper anodes for electrolytic refining |
7403 | Refined copper and copper alloys, unwrought: |
7403.A | Refined copper: |
7403.11.00.00 | Cathodes and sections of cathodes |
7403.12.00.00 | Wire-bars |
7403.13.00.00 | Billets |
7403.19.00.00 | Other |
7403.B | Copper alloys: |
7403.21.00.00 | Copper-zinc base alloys (brass) |
7403.22.00.00 | Copper-tin base alloys (bronze) |
7403.29.00.00 | Other copper alloys (other than master alloys of heading 7405) |
7404 | Copper waste and scrap: |
7404.00.10.00 | Of refined copper |
7404.A | Of copper alloys: |
7404.00.91.00 | Of copper-zinc base alloys (brass) |
7404.00.99.00 | Other |
7405.00.00.00 | Master alloys of copper |
7406 | Copper powders and flakes: |
7406.10.00.00 | Powders of non-lamellar structure |
7406.20.00.00 | Powders of lamellar structure; flakes |
7407 | Copper bars, rods and profiles: |
7407.10.00.00 | Of refined copper |
7407.A | Of copper alloys: |
7407.21 | Of copper-zinc base alloys (brass): |
7407.21.10.00 | Bars and rods |
7407.21.90.00 | Profiles |
7407.29.00.00 | Other |
7408 | Copper wire: |
7408.A | Of refined copper: |
7408.11.00.00 | Of which the maximum cross-sectional dimension exceeds 6 mm |
7408.19 | Other: |
7408.19.10.00 | Of which the maximum cross-sectional dimension exceeds 0,5 mm |
7408.19.90.00 | Of which the maximum cross-sectional dimension does not exceed 0,5 mm |
7408.B | Of copper alloys: |
7408.21.00.00 | Of copper-zinc base alloys (brass) |
7408.22.00.00 | Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver) |
7408.29.00.00 | Other |
7409 | Copper plates, sheets and strip, of a thickness exceeding 0,15 mm: |
7409.A | Of refined copper: |
7409.11 | In coils: |
7409.11.00.30 | Refined copper foil and strips, electrolytically manufactured, with a thickness of at least 0,015 mm |
7409.11.00.90 | Other |
7409.19.00.00 | Other |
7409.B | Of copper-zinc base alloys (brass): |
7409.21.00.00 | In coils |
7409.29.00.00 | Other |
7409.C | Of copper-tin base alloys (bronze): |
7409.31.00.00 | In coils |
7409.39.00.00 | Other |
7409.40.00.00 | Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver) |
7409.90.00.00 | Of other copper alloys |
7410 | Copper foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,15 mm: |
7410.A | Not backed: |
7410.11 | Of refined copper: |
7410.11.00.40 | Refined copper foil and strips, electrolytically manufactured, with a thickness of at least 0,015 mm |
7410.11.00.90 | Other |
7410.12.00.00 | Of copper alloys |
7410.B | Backed: |
7410.21 | Of refined copper: |
7410.21.00.10 | Sheet or plate of polytetrafluoroethylene, containing aluminium oxide or titanium dioxide as filler or reinforced with glass-fibre fabric, covered on both sides with copper foil |
7410.21.00.20 | Foils, rolls composed of one layer of glass epoxy of 100 µm colaminated with refined copper foil on one or two sides of 35 µm with a tolerance of 10 % for use in the production of smart cards |
7410.21.00.30 | Film of polyimide, whether or not containing epoxide resin and/or glass fibre, covered on one side or on both sides with a copper foil |
7410.21.00.40 | Sheet or plates: - consisting of at least a central layer of paper or one central sheet of any type of nonwoven fibre, laminated on each side with glass-fibre fabric and impregnated with epoxide resin, or - consisting of multiple layers of paper, impregnated with phenolic resin,coated on one or both sides with a copper film with a maximum thickness of 0,15 mm |
7410.21.00.50 | Plates: -consisting of at least one layer of fibreglass fabric impregnated with thermosetting resin, -covered on one or both sides with copper foil with a thickness of not more than 0,15 mm, and -with a dielectric constant (dk) of less than 3,9 and a loss factor (df) of less than 0,015 at a measuring frequency of 10 ghz, as measured according to ipc-tm-650 |
7410.21.00.55 | Plates:- consisting of at least one layer of fibreglass fabric impregnated with epoxide resin,- covered on one or both sides with copper foil with a thickness of not more than 0,15 mm,- with a dielectric constant (dk) of less than 5,4 at 1 mhz, as measured according to ipc-tm-650 2.. 5.. 5.. 2,- with a loss tangent of less than 0,035 at 1 mhz, as measured according to ipc-tm-650 2.. 5.. 5.. 2,- with a comparative tracking index (cti) of 600 or more |
7410.21.00.90 | Other |
7410.22.00.00 | Of copper alloys |
7411 | Copper tubes and pipes: |
7411.10 | Of refined copper: |
7411.10.10.00 | Straight |
7411.10.90.00 | Other |
7411.A | Of copper alloys: |
7411.21 | Of copper-zinc base alloys (brass): |
7411.21.10.00 | Straight |
7411.21.90.00 | Other |
7411.22.00.00 | Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver) |
7411.29.00.00 | Other |
7412 | Copper tube or pipe fittings (for example, couplings, elbows, sleeves): |
7412.10.00.00 | Of refined copper |
7412.20.00.00 | Of copper alloys |
7413 | Stranded wire, cables, plaited bands and the like, of copper, not electrically insulated: |
7413.00.00.10 | With fittings attached, for use in civil aircraft |
7413.00.00.20 | Loudspeaker centring ring, consisting of one or more vibration dampers and minimum two non-insulated copper cables, therein woven or pressed |
7413.00.00.90 | Other |
7415 | Nails, tacks, drawing pins, staples (other than those of heading 8305) and similar articles, of copper or of iron or steel with heads of copper; screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of copper: |
7415.10.00.00 | Nails and tacks, drawing pins, staples and similar articles |
7415.A | Other articles, not threaded: |
7415.21.00.00 | Washers (including spring washers) |
7415.29.00.00 | Other |
7415.B | Other threaded articles: |
7415.33.00.00 | Screws; bolts and nuts |
7415.39.00.00 | Other |
7418 | Table, kitchen or other household articles and parts thereof, of copper; pot scourers and scouring or polishing pads, gloves and the like, of copper; sanitary ware and parts thereof, of copper: |
7418.10 | Table, kitchen or other household articles and parts thereof; pot scourers and scouring or polishing pads, gloves and the like: |
7418.10.10.00 | Cooking or heating apparatus of a kind used for domestic purposes, non-electric, and parts thereof |
7418.10.90 | Other: |
7418.10.90.10 | Hand-made |
7418.10.90.90 | Other |
7418.20 | Sanitary ware and parts thereof: |
7418.20.00.10 | Hand-made |
7418.20.00.90 | Other |
7419 | Other articles of copper: |
7419.20 | Cast, moulded, stamped or forged, but not further worked: |
7419.20.00.10 | Hand-made |
7419.20.00.90 | Other |
7419.80 | Other: |
7419.80.10.00 | Cloth (including endless bands), grill and netting, of wire of which no cross-sectional dimension exceeds 6 mm; expanded metal |
7419.80.30.00 | Springs |
7419.80.90 | Other: |
7419.80.90.10 | Hand-made |
7419.80.90.A | Other: |
7419.80.90.91 | Disc (target) with deposition material, consisting of molybdenum silicide: - containing 1mg/kg or less of sodium and - mounted on a copper or aluminium support |
7419.80.90.99 | Other |
Need help to the find appropriate HS Code ?
or