Tariffy


 

Browse HS Codes - 74: COPPER AND ARTICLES THEREOF

7401
Copper mattes; cement copper (precipitated copper)
7402
Unrefined copper; copper anodes for electrolytic refining
7403
Refined copper and copper alloys, unwrought
7403.A
Refined copper
-
Cathodes and sections of cathodes
-
Wire-bars
-
Billets
-
Other
7403.B
Copper alloys
-
Copper-zinc base alloys (brass)
-
Copper-tin base alloys (bronze)
-
Other copper alloys (other than master alloys of heading 7405)
7404
Copper waste and scrap
-
Of refined copper
7404.A
Of copper alloys
-
Of copper-zinc base alloys (brass)
-
Other
7405
Master alloys of copper
7406
Copper powders and flakes
-
Powders of non-lamellar structure
-
Powders of lamellar structure; flakes
7407
Copper bars, rods and profiles
-
Of refined copper
7407.A
Of copper alloys
7407.A.A
Of copper-zinc base alloys (brass)
-
Bars and rods
-
Profiles
-
Other
7408
Copper wire
7408.A
Of refined copper
-
Of which the maximum cross-sectional dimension exceeds 6 mm
7408.A.A
Other
-
Of which the maximum cross-sectional dimension exceeds 0.5 mm
-
Of which the maximum cross-sectional dimension does not exceed 0.5 mm
7408.B
Of copper alloys
-
Of copper-zinc base alloys (brass)
-
Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver)
-
Other
7409
Copper plates, sheets and strip, of a thickness exceeding 0.15 mm
7409.A
Of refined copper
-
In coils
-
Other
7409.B
Of copper-zinc base alloys (brass)
-
In coils
-
Other
7409.C
Of copper-tin base alloys (bronze)
-
In coils
-
Other
-
Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver)
-
Of other copper alloys
7410
Copper foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0.15 mm
7410.A
Not backed
7410.A.A
Of refined copper
-
Refined copper foil and strips, electrolytically manufactured, with a thickness of 0.015 mm or more but not more than 0.150 mm, used for the manufacture of laminates for printed circuit boards and of printed circuit boards in the printed circuit board industry
-
Other
-
Of copper alloys
7410.B
Backed
7410.B.A
Of refined copper
-
Sheet or plate of polytetrafluoroethylene, containing aluminium oxide or titanium dioxide as filler or reinforced with glass-fibre fabric, covered on both sides with copper foil
-
Foils, rolls composed of one layer of glass epoxy of 100 µm colaminated with refined copper foil on one or two sides of 35 µm with a tolerance of 10% for use in the production of smart cards
-
Film of polyimide, whether or not containing epoxide resin and/or glass fibre, covered on one side or on both sides with a copper foil
-
Sheet or plates:- consisting of at least a central layer of paper or one central sheet of any type of nonwoven fibre, laminated on each side with glass-fibre fabric and impregnated with epoxide resin, or- consisting of multiple layers of paper, impregnated with phenolic resin,coated on one or both sides with a copper film with a maximum thickness of 0.15 mm
-
Plates:-consisting of at least one layer of fibreglass fabric impregnated with thermosetting resin,-covered on one or both sides with copper foil with a thickness of not more than 0.15 mm, and-with a dielectric constant (dk) of less than 3.9 and a loss factor (df) of less than 0.015 at a measuring frequency of 10 ghz, as measured according to ipc-tm-650
-
Plates:- consisting of at least one layer of fibreglass fabric impregnated with epoxide resin,- covered on one or both sides with copper foil with a thickness of not more than 0.15 mm,- with a dielectric constant (dk) of less than 5.4 at 1 mhz, as measured according to ipc-tm-650 2.5.5.2,- with a loss tangent of less than 0.035 at 1 mhz, as measured according to ipc-tm-650 2.5.5.2,- with a comparative tracking index (cti) of 600 or more
-
Other
-
Of copper alloys
7411
Copper tubes and pipes
7411.A
Of refined copper
-
Straight
-
Other
7411.B
Of copper alloys
7411.B.A
Of copper-zinc base alloys (brass)
-
Straight
-
Other
-
Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver)
-
Other
7412
Copper tube or pipe fittings (for example, couplings, elbows, sleeves)
-
Of refined copper
-
Of copper alloys
7413
Stranded wire, cables, plaited bands and the like, of copper, not electrically insulated
-
With fittings attached, for use in civil aircraft
-
Loudspeaker centring ring, consisting of one or more vibration dampers and minimum two non-insulated copper cables, therein woven or pressed
-
Other
7415
Nails, tacks, drawing pins, staples (other than those of heading 8305) and similar articles, of copper or of iron or steel with heads of copper; screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of copper
-
Nails and tacks, drawing pins, staples and similar articles
7415.A
Other articles, not threaded
-
Washers (including spring washers)
-
Other
7415.B
Other threaded articles
-
Screws; bolts and nuts
-
Other
7418
Table, kitchen or other household articles and parts thereof, of copper; pot scourers and scouring or polishing pads, gloves and the like, of copper; sanitary ware and parts thereof, of copper
7418.A
Table, kitchen or other household articles and parts thereof; pot scourers and scouring or polishing pads, gloves and the like
-
Cooking or heating apparatus of a kind used for domestic purposes, non-electric, and parts thereof
7418.A.A
Other
-
Hand-made
-
Other
7418.B
Sanitary ware and parts thereof
-
Hand-made
-
Other
7419
Other articles of copper
7419.A
Cast, moulded, stamped or forged, but not further worked
-
Hand-made
-
Other
7419.B
Other
-
Cloth (including endless bands), grill and netting, of wire of which no cross-sectional dimension exceeds 6 mm; expanded metal
-
Springs
7419.B.A
Other
-
Hand-made
-
Other

Need help to the find appropriate HS Code ?
 
 or