HS Codes - 76: Aluminium and articles thereof

7601
Unwrought aluminium
7601.10.00
Aluminium, not alloyed
7601.10.10.00
Slabs
7601.10.90.00
Other
7601.20.00
Aluminium alloys
7601.20.30.00
Slabs
7601.20.40.00
Billets
7601.20.80.00
Other
7602
Aluminium waste and scrap
-
Waste
7602.00.11.00
Turnings, shavings, chips, milling waste, sawdust and filings; waste of coloured, coated or bonded sheets and foil, of a thickness (excluding any backing) not exceeding 0,2 mm
7602.00.19.00
Other (including factory rejects)
7602.00.90.00
Scrap
7603
Aluminium powders and flakes
7603.10.00
Powders of non-lamellar structure
7603.20.00
Powders of lamellar structure; flakes
7604
Aluminium bars, rods and profiles
7604.10.00
Of aluminium, not alloyed
7604.10.10.00
Bars and rods
7604.10.10.11
Unassembled, containing not more than 99.3% of aluminium
7604.10.10.90
Other
7604.10.90.00
Profiles
-
Bearing a specific manufacture number, for use in certain types of aircraft
7604.10.90.11
Unassembled, containing not more than 99.3% of aluminium
7604.10.90.19
Other
-
Conical shapes for reinforcing lateral rudders, for use in certain types of aircraft
7604.10.90.25
Unassembled, containing not more than 99.3% of aluminium
7604.10.90.29
Other
-
Other
7604.10.90.80
Unassembled, containing not more than 99.3% of aluminium
7604.10.90.89
Other
-
Of aluminium alloys
7604.21.00
Hollow profiles
7604.21.00.10
Hollow profile with:, , -one closed chamber of aluminum alloy 6063-T5 or 6060-T5,, , -a wall thickness of not more than 0,7 mm, and, , -an anodized layer of 10 µm at the surface,, for use in the manufacture of board frames of whiteboards, cork boards, easel boards, education boards and display cases
7604.21.00.90
Other
7604.29.00
Other
7604.29.10.00
Bars and rods
7604.29.10.10
Bars of aluminium-lithium alloys
7604.29.10.30
Aluminium alloy rods with a diameter of 300,1 mm or more, but not more than 533,4 mm
7604.29.10.40
Bars and rods of aluminium alloys containing by weight :, , - 0,25 % or more but not more than 7 % of zinc, and, , - 1 % or more but not more than 3 % of magnesium, and, , - 1 % or more but not more than 5 % of copper, and, , - not more than 1 % of manganese, consistent with the material specifications AMS QQ-A-225, of a kind used in aerospace industry (inter alia conforming NADCAP and AS9100) and obtained by rolling mill process
7604.29.10.90
Other
7604.29.90.00
Profiles
7604.29.90.10
Bearing a specific manufacture number, for use in certain types of aircraft
7604.29.90.20
Conical shapes for reinforcing lateral rudders, for use in certain types of aircraft
7604.29.90.90
Other
7605
Aluminium wire
-
Of aluminium, not alloyed
7605.11.00
Of which the maximum cross-sectional dimension exceeds 7 mm
7605.19.00
Other
7605.19.00.10
Not alloyed aluminium wire, of a diameter of 2 mm or more but not more than 6 mm, covered with a layer of copper of a thickness of 0,032 mm or more but not more than 0,117 mm
7605.19.00.90
Other
-
Of aluminium alloys
7605.21.00
Of which the maximum cross-sectional dimension exceeds 7 mm
7605.21.00.10
Aluminium alloy wire with a diameter of 9,50 mm or more but not more than 19,15 mm, in coils, for use in the manufacture of aeronautical fasteners
7605.21.00.90
Other
7605.29.00
Other
7605.29.00.10
Wire of aluminium alloys containing by weight:, , - 0,10 % or more but not more than 5 % of copper, and, , - 0,2 % or more but not more than 6 % of magnesium, and, , - 0,10 % or more but not more than 7 % of zinc, and, , - not more than 1 % of manganese, consistent with the material specifications AMS QQ-A-430, of a kind used in aerospace industry (inter alia conforming NADCAP and AS9100) and obtained by rolling mill process
7605.29.00.90
Other
7606
Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm
-
Rectangular (including square)
7606.11.00
Of aluminium, not alloyed
7606.11.30.00
Aluminium Composite Panel
-
Other
7606.11.50.00
Painted, varnished or coated with plastics
-
Plates bearing a specific manufacture number, for use in certain types of aircraft
7606.11.50.25
Not backed, without internal layers of other material
7606.11.50.30
Other
-
Other
7606.11.50.86
Not backed, without internal layers of other material
7606.11.50.89
Other
-
Other, of a thickness of
7606.11.91.00
Less than 3 mm
-
Plates bearing a specific manufacture number, for use in certain types of aircraft
7606.11.91.25
Not backed, without internal layers of other material
7606.11.91.30
Other
-
Other
7606.11.91.86
Not backed, without internal layers of other material
7606.11.91.89
Other
7606.11.93.00
Not less than 3 mm but less than 6 mm
-
Plates bearing a specific manufacture number, for use in certain types of aircraft
7606.11.93.25
Not backed, without internal layers of other material
7606.11.93.30
Other
-
Other
7606.11.93.86
Not backed, without internal layers of other material
7606.11.93.89
Other
7606.11.99.00
Not less than 6 mm
-
Plates bearing a specific manufacture number, for use in certain types of aircraft
7606.11.99.25
Not backed, without internal layers of other material
7606.11.99.30
Other
-
Other
7606.11.99.86
Not backed, without internal layers of other material
7606.11.99.89
Other
7606.12.00
Of aluminium alloys
-
Beverage can body stock, end stock and tab stock
7606.12.11.00
Beverage can body stock
7606.12.19.00
Beverage can end stock and tab stock
7606.12.30.00
Aluminium Composite Panel
-
Other
7606.12.50.00
Painted, varnished or coated with plastics
-
Plates bearing a specific manufacture number, for use in certain types of aircraft
-
Not backed, without internal layers of other material
7606.12.50.23
Of a thickness of not less than 0,8 mm
7606.12.50.25
Other
7606.12.50.30
Other
-
Other
-
Not backed, without internal layers of other material
7606.12.50.85
For use as body panels in the car industry and of a thickness of not more than 6 mm or for use in the manufacture of aircraft parts and of a thickness of not less than 0,8 mm
-
Other
7606.12.50.87
Hot rolled coils, tension levelled, of a thickness not exceeding 1,5 mm, of a width of not less than 800 mm but not exceeding 2050 mm, for use in the manufacture of aluminium composite panels
7606.12.50.88
Other
7606.12.50.89
Other
-
Other, of a thickness of
7606.12.92.00
Less than 3 mm
-
Plates bearing a specific manufacture number, for use in certain types of aircraft
-
Not backed, without internal layers of other material
7606.12.92.23
Of a thickness of not less than 0,8 mm
7606.12.92.25
Other
7606.12.92.30
Other
-
Other
-
Not backed, without internal layers of other material
7606.12.92.91
For use as body panels in the car industry or for use in the manufacture of aircraft parts and of a thickness of not less than 0,8 mm
-
Other
7606.12.92.92
Hot rolled coils, tension levelled, of a thickness not exceeding 1,5 mm, of a width of not less than 800 mm but not exceeding 2050 mm, for use in the manufacture of aluminium composite panels
7606.12.92.93
Other
7606.12.92.97
Other
7606.12.93.00
Not less than 3 mm but less than 6 mm
7606.12.93.10
Plates bearing a specific manufacture number, for use in certain types of aircraft
-
Other
-
Not backed, without internal layers of other material
7606.12.93.85
For use as body panels in the car industry or for use in the manufacture of aircraft parts
7606.12.93.86
Other
7606.12.93.88
Other
7606.12.99.00
Not less than 6 mm
7606.12.99.10
Plates bearing a specific manufacture number, for use in certain types of aircraft
-
Sheets of aluminium-lithium alloys
-
Not backed, without internal layers of other material
7606.12.99.21
For use as body panels in the car industry and with a thickness of 6 mm or for use in the manufacture of aircraft parts
7606.12.99.25
Other
7606.12.99.30
Other
-
Other
-
Not backed, without internal layers of other material
7606.12.99.85
For use as body panels in the car industry and with a thickness of 6 mm or for use in the manufacture of aircraft parts
7606.12.99.86
Other
7606.12.99.88
Other
-
Other
7606.91.00
Of aluminium, not alloyed
-
Plates bearing a specific manufacture number, for use in certain types of aircraft
7606.91.00.25
Not backed, without internal layers of other material,, - in coils or in coiled strips, in cut-to-length sheets, or in the form of circles; of a thickness exceeding 0,2 mm but not exceeding 6 mm;, - in plates, of a thickness exceeding 6 mm
7606.91.00.30
Other
-
Other
7606.91.00.86
Not backed, without internal layers of other material,, - in coils or in coiled strips, in cut-to-length sheets, or in the form of circles; of a thickness exceeding 0,2 mm but not exceeding 6 mm;, - in plates, of a thickness exceeding 6 mm
7606.91.00.88
Other
7606.92.00
Of aluminium alloys
-
Plates bearing a specific manufacture number, for use in certain types of aircraft
-
Not backed, without internal layers of other material,, - in coils or in coiled strips, in cut-to-length sheets, or in the form of circles; of a thickness exceeding 0,2 mm but not exceeding 6 mm;, - in plates, of a thickness exceeding 6 mm
7606.92.00.23
Of a thickness of not less than 0,8 mm, for use in the manufacture of aircraft parts
7606.92.00.25
Other
7606.92.00.30
Other
-
Other
-
Not backed, without internal layers of other material,, - in coils or in coiled strips, in cut-to-length sheets, or in the form of circles; of a thickness exceeding 0,2 mm but not exceeding 6 mm;, - in plates, of a thickness exceeding 6 mm
7606.92.00.85
For use as body panels in the car industry and of a thickness of not more than 6 mm or for use in the manufacture of aircraft parts and of a thickness of not less than 0,8 mm
-
Other
7606.92.00.91
Hot rolled coils, tension levelled, of a thickness not exceeding 1,5 mm, of a width of not less than 800 mm but not exceeding 2050 mm, for use in the manufacture of aluminium composite panels
7606.92.00.92
Other
7606.92.00.95
Other
7607
Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm
-
Not backed
7607.11.00
Rolled but not further worked
-
Of a thickness of less than 0,021 mm
7607.11.11.00
In rolls of a weight not exceeding 10 kg
-
Of a thickness of 0,007 mm or more but less than 0,021 mm
7607.11.11.11
Consigned from Thailand
7607.11.11.19
Other
7607.11.11.90
Other
7607.11.19.00
Other
7607.11.19.10
For household use, of a thickness of not less than 0,008 mm and not more than 0,018 mm, in rolls of a width not exceeding 650 mm
7607.11.19.30
For household use, of a thickness of not less than 0,007 mm and less than 0,008 mm, whether or not annealed
7607.11.19.40
For household use, of a thickness of not less than 0,008 mm and not more than 0,018 mm, in rolls of a width exceeding 650 mm, whether or not annealed
7607.11.19.50
For household use, of a thickness of more than 0,018 mm and less than 0,021 mm, whether or not annealed
7607.11.19.60
For other uses than household aluminium foil,, - Of a thickness of not less than 0,007 mm and less than 0,008 mm, whether or not annealed, or,, - Of a thickness of not less than 0,008 mm and not more than 0,018 mm, in rolls of a width exceeding 650 mm, whether or not annealed, or,, - Of a thickness of more than 0,018 mm and less than 0,021 mm, whether or not annealed
-
Other
7607.11.19.91
Aluminium converter foil
7607.11.19.94
Household aluminium foil
7607.11.19.96
Other
7607.11.90.00
Of a thickness of not less than 0,021 mm but not more than 0,2 mm
-
Aluminium foil in rolls:, - having a purity of 99,99 % by weight, , - of a thickness of 0,021 mm or more but not more than 0,2 mm, , - with a width of 500 mm, , - with a surface oxide layer by 3 to 4 nm thick, , - and with a cubic texture of more than 95 %
-
Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers
7607.11.90.44
Of a thickness of not less than 0,03 mm, without internal layers of other material
7607.11.90.46
Other
-
Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers, for other uses than aluminium household foil
7607.11.90.48
Of a thickness of not less than 0,03 mm, without internal layers of other material
7607.11.90.49
Other
-
Other
7607.11.90.51
Of a thickness of not less than 0,03 mm but less than 0.2 mm, without internal layers of other material, in coils or in coiled strips
-
Of a thickness of 0.2 mm, in coils or in coiled strips, in cut-to-length sheets, or in the form of circles
-
Without internal layers of other material
7607.11.90.52
Alloyed, for use as body panels in the car industry
7607.11.90.53
Other
7607.11.90.54
Other
7607.11.90.56
Other
-
Plain aluminium foil with the following parameters: , - an aluminium content of 99,98 % or more , - a thickness of 0,070 mm or more but not more than 0,125 mm , - with a cubic texture of a kind used for high voltage etching
7607.11.90.65
Without internal layers of other material, in coils or in coiled strips
7607.11.90.67
Other
-
Other
-
Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers
7607.11.90.71
Of a thickness of not less than 0,03 mm, without internal layers of other material
7607.11.90.72
Other
-
Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers, for other uses than aluminium household foil
7607.11.90.73
Of a thickness of not less than 0,03 mm, without internal layers of other material
7607.11.90.74
Other
-
Aluminium and magnesium alloy strip or foil:, - of an alloy conforming to standards 5182-H19 or 5052-H19,, - in rolls with an outside diameter of minimum 1 250 mm but not more than 1 350 mm,, - of a thickness (tolerance - 0,006 mm) of 0,15 mm, 0,16 mm, 0,18 mm or 0,20 mm,, - of a width ( tolerance ± 0,3 mm) of 12,5 mm, 15,0 mm, 16,0 mm, 25,0 mm, 35,0 mm, 50,0 mm or 356 mm, , - having a camber tolerance of not more than 0,4 mm/750 mm,, - of a flatness measurement: I-unit ±4,, - having a tensile strength of more than (5182-H19) 365 MPa or (5052-H19) 320 MPa,, - of an elongation A50 of more than (5182-H19) 3 % or (5052-H19) 2,5 %, for use in the manufacture of slats for blinds
7607.11.90.75
Of a thickness of not less than 0,03 mm but less than 0.2 mm, without internal layers of other material, in coils or in coiled strips
-
Of a thickness of 0.2 mm
-
Without internal layers of other material
7607.11.90.76
For use as body panels in the car industry
7607.11.90.77
Other
7607.11.90.78
Other
7607.11.90.79
Other
-
Other
7607.11.90.91
Of a thickness of not less than 0,03 mm but less than 0.2 mm, without internal layers of other material, in coils or in coiled strips
-
Of a thickness of 0.2 mm, in coils or in coiled strips, in cut-to-length sheets, or in the form of circles
-
Without internal layers of other material
7607.11.90.92
Alloyed, for use as body panels in the car industry
7607.11.90.93
Other
7607.11.90.94
Other
7607.11.90.96
Other
7607.19.00
Other
7607.19.10.00
Of a thickness of less than 0,021 mm
-
Of a thickness of 0,007 mm or more but less than 0,021 mm, in rolls of a weight not exceeding 10 kg, not further worked than rolled, embossed
7607.19.10.11
Consigned from Thailand
7607.19.10.19
Other
7607.19.10.90
Other
7607.19.90.00
Of a thickness of not less than 0,021 mm but not more than 0,2 mm
7607.19.90.75
Of a thickness of not less than 0,03 mm but less than 0.2 mm, without internal layers of other material, in coils or in coiled strips
-
Of a thickness of 0.2 mm, in coils or in coiled strips, in cut-to-length sheets, or in the form of circles
-
Without internal layers of other material
7607.19.90.84
Alloyed, for use as body panels in the car industry
-
Other
7607.19.90.93
Hot rolled coils, alloyed, tension levelled, of a width of not less than 800 mm but not exceeding 2050 mm, for use in the manufacture of aluminium composite panels
7607.19.90.94
Other
7607.19.90.95
Other
7607.19.90.96
Other
7607.20.00
Backed
7607.20.10.00
Of a thickness (excluding any backing) of less than 0,021 mm
-
Of a thickness (excluding any backing) of not less than 0,021 mm but not more than 0,2 mm
7607.20.91.00
Aluminium Composite Panel
7607.20.99.00
Other
7607.20.99.10
Aluminium foil, in rolls:, - coated on one side with polypropylene or polypropylene and acid-modified polypropylene and on the other with polyamide and polyethylene terephthalate, with adhesive layers between them,, - with a width of 200 mm or more, but not more than 400 mm,, - with a thickness of 0,138 mm or more, but not more than 0,168 mm,, for use in the manufacture of lithium-ion battery cell covers
7607.20.99.90
Other
7608
Aluminium tubes and pipes
7608.10.00
Of aluminium, not alloyed
-
With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft
7608.10.00.11
Unassembled, not welded, containing not more than 99.3% of aluminium
7608.10.00.19
Other
7608.10.00.20
Tubes and pipes, ready for fitting, usable as hydraulic conduits or as conduits for fuel-oil or lubricants for use in certain types of aircraft
7608.10.00.21
Other
7608.10.00.80
Unassembled, not welded, containing not more than 99.3% of aluminium
7608.10.00.89
Other
7608.20.00
Of aluminium alloys
7608.20.20.00
Welded
7608.20.20.10
With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft
7608.20.20.20
Tubes and pipes, ready for fitting, usable as hydraulic conduits or as conduits for fuel-oil or lubricants for use in certain types of aircraft
7608.20.20.90
Other
-
Other
7608.20.81.00
Not further worked than extruded
7608.20.81.10
With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft
7608.20.81.20
Seamless aluminium alloyed extruded tubes (Aluminum 6061F according to standard ASTM B241) with:, , -an outer diameter of 320 mm or more but not more than 400 mm, and, , -a wall thickness of 8 mm or more but not more than 10 mm,, for use in the manufacture of high pressure vessels
7608.20.81.90
Other
7608.20.89.00
Other
7608.20.89.10
With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft
7608.20.89.20
Tubes and pipes, ready for fitting, usable as hydraulic conduits or as conduits for fuel-oil or lubricants for use in certain types of aircraft
7608.20.89.30
Seamless aluminium alloyed extruded tubes with:, , - an outer diameter of 60 mm or more but not more than 420 mm, and, , - a wall thickness of 10 mm or more but not more than 80 mm
7608.20.89.40
Seamless flow forming aluminium alloyed tubes (Aluminum 6061A according to standard ISO 7866) with:, , -an outer diameter of 378 mm or more but not more than 385 mm, and, , -a wall thickness of 4 mm or more but not more than 7 mm, for use in the manufacture of high pressure vessels
7608.20.89.90
Other
7609
Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves)
7609.00.00.10
For use in certain types of aircraft
7609.00.00.30
Aluminium connecting block for automotive air conditioning systems: , , -with a T6 hardening, , , -equipped with round stubs with a circumferential outer groove,, , -with through or non-through holes, made of profiles with an upper radius of 8 mm or more but not more than 11 mm, and a lower radius of 12 mm or more but not more than 17 mm,, , -with a distance between holes of 15 mm or more but not more than 22 mm,, , -with sockets designed for brazing or clamping,, , -with mounting holes for M6 or M8 mounting screw, threaded or not,, , -with a width of 5 mm or more but not more than 16 mm,, , -for connecting a compressor, a condenser, an evaporator, a chiller and other lines
7609.00.00.40
Flame brazed aluminium block for connecting tubes in automotive heat exchangers and/or turbocharged air coolers and/or automatic transmission coolers:, , -with extruded, bent connection tubes with an outer diameter of 5 mm or more, but not more than 25 mm,, , -with a weight of 0,02 kg or more, but not more than 0,25 kg,, for use in the manufacture of cooling system in vehicles of Chapter 87
7609.00.00.50
Machined aluminium components:, , -containing by weight 0,55 %, or more but not more than 0,61 % of magnesium,, , -containing by weight 0,55 %, or more but not more than 0,61 % of silicon,, , -with a hardening state of T5 or T6,, , -with a mass of 0,05 kg or more, but not more than 0,2 kg,, for use in the manufacture of CO₂ cooling systems in motor vehicles
7609.00.00.60
Aluminium connection block:, , -with a weight of 3 g or more but not more than 400 g,, , -manufactured from 6061-T6 or 6060-T6 or 6082-T6 aluminium grade,, , -being an integral part of an air conditioning hose assembly or oil cooling line hose assembly or air brake line hose assembly or water cooling line hose assembly,, , -with holes (sockets) or splines (pilots) or threads that allow installation in an automotive or other air conditioning system (also understood as installation in the line),, , -with sockets designed for brazing or fastening,, , -with at least 1 through-hole with a diameter of 3 mm or more but not more than 25 mm,, for the manufacture of automotive cooling and air conditioning systems
7609.00.00.90
Other
7610
Aluminium structures (excluding prefabricated buildings of heading 9406) and parts of structures (for example, bridges and bridge-sections, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, balustrades, pillars and columns); aluminium plates, rods, profiles, tubes and the like, prepared for use in structures
7610.10.00
Doors, windows and their frames and thresholds for doors
7610.90.00
Other
7610.90.10.00
Bridges and bridge-sections, towers and lattice masts
7610.90.90.00
Other
7610.90.90.10
Bars, rods, profiles (whether or not hollow), tubes, pipes, unassembled, not welded, made from aluminium, whether or not alloyed, containing not more than 99.3% of aluminium
-
Other
7610.90.90.91
Products attached (e.g. by welding or fasteners) to form subassemblies
7610.90.90.92
Products in a packaged kit with the necessary parts to assemble a finished product without further finishing or fabrication of the parts (‘finished goods kit’)
7610.90.90.95
Other
7611.00
Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment
7612
Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment
7612.10.00
Collapsible tubular containers
7612.90.00
Other
7612.90.20.00
Containers of a kind used for aerosols
7612.90.30.00
Manufactured from foil of a thickness not exceeding 0,2 mm
7612.90.80.00
Other
7613
Aluminium containers for compressed or liquefied gas
7613.00.00.10
Bottles for inflating escape chutes, intended for use in certain types of aircraft
7613.00.00.20
Aluminium container, seamless, for compressed natural gas or compressed hydrogen, wholly embedded in an overwrap of epoxy-carbon fibres composite, of a storage capacity of 172 l (± 10 %) and an unfilled weight of not more than 64 kg
7613.00.00.90
Other
7614
Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated
7614.10.00
With steel core
7614.90.00
Other
7615
Table, kitchen or other household articles and parts thereof, of aluminium; pot scourers and scouring or polishing pads, gloves and the like, of aluminium; sanitary ware and parts thereof, of aluminium
7615.10.00
Table, kitchen or other household articles and parts thereof; pot scourers and scouring or polishing pads, gloves and the like
7615.10.10.00
Cast
7615.10.10.10
Aluminium radiators and elements or sections of which such radiator is composed, whether or not such elements are assembled in blocks
7615.10.10.90
Other
7615.10.30.00
Manufactured from foil of a thickness not exceeding 0,2 mm
7615.10.80.00
Other
7615.10.80.10
Aluminium radiators and elements or sections of which such radiator is composed, whether or not such elements are assembled in blocks
7615.10.80.90
Other
7615.20.00
Sanitary ware and parts thereof
7616
Other articles of aluminium
7616.10.00
Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles
7616.10.00.10
Self-locking bolts and nuts (of the type "Hi-lok")
7616.10.00.11
Other
7616.10.00.91
For use in certain types of aircraft
7616.10.00.99
Other
-
Other
7616.91.00
Cloth, grill, netting and fencing, of aluminium wire
7616.99.00
Other
7616.99.10.00
Cast
7616.99.10.10
Collars, flanges and other devices for fixing, jointing, clamping or spacing, for use in certain types of aircraft
7616.99.10.20
"Quick change" apparatus for transforming passenger transport aeroplanes into goods transport aeroplanes and vice versa, for use in certain types of aircraft
-
Other
7616.99.10.91
Aluminium radiators and elements or sections of which such radiator is composed, whether or not such elements are assembled in blocks
7616.99.10.99
Other
7616.99.90.00
Other
-
Hand-made
7616.99.90.01
Aluminium radiators and elements or sections of which such radiator is composed, whether or not such elements are assembled in blocks
7616.99.90.09
Other
-
Other
7616.99.90.15
Honeycomb aluminium blocks for use in the manufacture of aircraft parts
7616.99.90.20
"Quick change" apparatus for transforming passenger transport aeroplanes into goods transport aeroplanes and vice versa, for use in certain types of aircraft
7616.99.90.25
Metallised film:, , - consisting of eight or more layers of aluminium (CAS RN 7429-90-5) of a purity of 99,8 % or more,, , - with an optical density of each aluminium layer of not more than 3.0,, , - with each aluminium layer separated by a resin layer,, , - on a carrier film of PET, and, , - on rolls of up to 50 000 metres in length
7616.99.90.30
Plates and sheets of variable thickness of widths of 1 200 mm or more, for use in certain types of aircraft
7616.99.90.60
Disc (target) with deposition material, consisting of molybdenum silicide:, , - containing 1mg/kg or less of sodium and, , - mounted on a copper or aluminium support
7616.99.90.70
Connecting components for use in the production of helicopter tail rotor shafts
7616.99.90.77
Television pedestal stands with or without bracket for fixation to and stabilization of television cabinet case/body
-
Other
7616.99.90.91
Aluminium radiators and elements or sections of which such radiator is composed, whether or not such elements are assembled in blocks
7616.99.90.99
Other

Need help to the find appropriate HS Code ?