HS Codes - 84: Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof
| 8401 | Nuclear reactors; fuel elements (cartridges), non-irradiated, for nuclear reactors; machinery and apparatus for isotopic separation |
| 8401.10.00 | Nuclear reactors |
| 8401.20.00 | Machinery and apparatus for isotopic separation, and parts thereof |
| 8401.30.00 | Fuel elements (cartridges), non-irradiated |
| 8401.30.00.20 | Non-irradiated hexagonal fuel modules (elements) for use in nuclear reactors |
| 8401.30.00.80 | Other |
| 8401.40.00 | Parts of nuclear reactors |
| 8401.40.00.10 | Stainless steel absorber control rods, filled with neutron absorbing chemical elements |
| 8401.40.00.90 | Other |
| 8402 | Steam or other vapour generating boilers (other than central heating hot water boilers capable also of producing low pressure steam); superheated water boilers |
| - | Steam or other vapour generating boilers |
| 8402.11.00 | Watertube boilers with a steam production exceeding 45 tonnes per hour |
| 8402.12.00 | Watertube boilers with a steam production not exceeding 45 tonnes per hour |
| 8402.19.00 | Other vapour generating boilers, including hybrid boilers |
| 8402.19.10.00 | Firetube boilers |
| 8402.19.90.00 | Other |
| 8402.20.00 | Superheated water boilers |
| 8402.90.00 | Parts |
| 8403 | Central heating boilers other than those of heading 8402 |
| 8403.10.00 | Boilers |
| 8403.10.10.00 | Of cast iron |
| 8403.10.90.00 | Other |
| 8403.90.00 | Parts |
| 8403.90.10.00 | Of cast iron |
| 8403.90.90.00 | Other |
| 8404 | Auxiliary plant for use with boilers of heading 8402 or 8403 (for example, economisers, superheaters, soot removers, gas recoverers); condensers for steam or other vapour power units |
| 8404.10.00 | Auxiliary plant for use with boilers of heading 8402 or 8403 |
| 8404.20.00 | Condensers for steam or other vapour power units |
| 8404.90.00 | Parts |
| 8405 | Producer gas or water gas generators, with or without their purifiers; acetylene gas generators and similar water process gas generators, with or without their purifiers |
| 8405.10.00 | Producer gas or water gas generators, with or without their purifiers; acetylene gas generators and similar water process gas generators, with or without their purifiers |
| 8405.90.00 | Parts |
| 8406 | Steam turbines and other vapour turbines |
| 8406.10.00 | Turbines for marine propulsion |
| - | Other turbines |
| 8406.81.00 | Of an output exceeding 40 MW |
| 8406.82.00 | Of an output not exceeding 40 MW |
| 8406.82.00.10 | Industrial steam turbine with:, , -an output of 5 MW or more but not more than 40 MW,, , -designed for a pressure of not more than 140 bar and a temperature of not more than 540 ° C,, , -equipped with double seat valves on the live steam side which are operated with a hydraulic servo of not more than 12 bar |
| 8406.82.00.90 | Other |
| 8406.90.00 | Parts |
| 8406.90.10.00 | Stator blades, rotors and their blades |
| 8406.90.90.00 | Other |
| 8407 | Spark-ignition reciprocating or rotary internal combustion piston engines |
| 8407.10.00 | Aircraft engines |
| 8407.10.00.10 | For use in civil aircraft |
| 8407.10.00.20 | Intended to be fitted in aircraft imported duty free or built within the Community |
| 8407.10.00.90 | Other |
| - | Marine propulsion engines |
| 8407.21.00 | Outboard motors |
| 8407.21.10.00 | Of a cylinder capacity not exceeding 325 cm³ |
| - | Of a cylinder capacity exceeding 325 cm³ |
| 8407.21.91.00 | Of a power not exceeding 30 kW |
| 8407.21.99.00 | Of a power exceeding 30 kW |
| 8407.29.00 | Other |
| - | Reciprocating piston engines of a kind used for the propulsion of vehicles of Chapter 87 |
| 8407.31.00 | Of a cylinder capacity not exceeding 50 cm³ |
| 8407.32.00 | Of a cylinder capacity exceeding 50 cm³ but not exceeding 250 cm³ |
| 8407.32.10.00 | Of a cylinder capacity exceeding 50 cm³ but not exceeding 125 cm³ |
| 8407.32.90.00 | Of a cylinder capacity exceeding 125 cm³ but not exceeding 250 cm³ |
| 8407.33.00 | Of a cylinder capacity exceeding 250 cm³ but not exceeding 1 000 cm³ |
| 8407.33.20.00 | Of a cylinder capacity exceeding 250 cm³ but not exceeding 500 cm³ |
| 8407.33.20.10 | Spark-ignition reciprocating or rotary internal combustion piston engines, having a cylinder capacity of not less than 300 cm³ and a power of not less than 6 kW or more but not more than 20,0 kW, for the manufacture of: , -lawn mowers of subheadings 8433 11, 8433 19 and 8433 20, , -tractors of subheadings 8701 91 90, 8701 92 90 whose main function is that of a lawn mower, , -four stroke mowers with motor of a cylinder capacity of not less than 300 cm³ of subheading 8433 20 10 or , -snowploughs and snow blowers of subheading 8430 20 |
| 8407.33.20.90 | Other |
| 8407.33.80.00 | Of a cylinder capacity exceeding 500 cm³ but not exceeding 1000 cm³ |
| 8407.33.80.10 | Spark-ignition reciprocating or rotary internal combustion piston engines, having a cylinder capacity of not less than 300 cm³ and a power of not less than 6 kW or more but not more than 20,0 kW, for the manufacture of: , -lawn mowers of subheadings 8433 11, 8433 19 and 8433 20, , -tractors of subheadings 8701 91 90, 8701 92 90 whose main function is that of a lawn mower, , -four stroke mowers with motor of a cylinder capacity of not less than 300 cm³ of subheading 8433 20 10 or , -snowploughs and snow blowers of subheading 8430 20 |
| 8407.33.80.90 | Other |
| 8407.34.00 | Of a cylinder capacity exceeding 1 000 cm³ |
| 8407.34.10.00 | For the industrial assembly of: pedestrian-controlled tractors of subheading 8701 10; motor vehicles of heading 8703; motor vehicles of heading 8704 with an engine of a cylinder capacity of less than 2 800 cm³; motor vehicles of heading 8705 |
| 8407.34.10.10 | Spark-ignition reciprocating or rotary internal combustion piston engines, with:, , -a cylinder capacity of 1 200 cm³ or more but not more than 2 000 cm³, , -a power of 95 kW but not more than 135 kW,, , -a weight of not more than 120 kg,, for use in the manufacture of motor vehicles of 8703 |
| 8407.34.10.90 | Other |
| - | Other |
| 8407.34.30.00 | Used |
| - | New, of a cylinder capacity |
| 8407.34.91.00 | Not exceeding 1 500 cm³ |
| 8407.34.99.00 | Exceeding 1 500 cm³ |
| 8407.90.00 | Other engines |
| 8407.90.10.00 | Of a cylinder capacity not exceeding 250 cm³ |
| 8407.90.10.10 | Four-stroke petrol engines of a cylinder capacity of not more than 250 cm³ for use in the manufacture of garden equipment of heading 8432, 8433, 8436 or 8508 |
| 8407.90.10.40 | A power unit with a two-stroke engine with:, , -an output of 900 W or more, but not more than 1 100 W,, , -a cylinder displacement of more than 24 cm³ but not more than 30 cm³,, , -a rotation speed of more than 8 400 rpm but not more than 8 600 rpm at maximum power,, , -an idling speed of more than 2 800 rpm but not more than 3 200 rpm, and, , -a fuel tank with a capacity of 0,5 l or more,, for use in the manufacture of garden machinery and garden machinery components |
| 8407.90.10.90 | Other |
| - | Of a cylinder capacity exceeding 250 cm³ |
| 8407.90.50.00 | For the industrial assembly of: pedestrian-controlled tractors of subheading 8701 10; motor vehicles of heading 8703; motor vehicles of heading 8704 with an engine of a cylinder capacity of less than 2 800 cm³; motor vehicles of heading 8705 |
| - | Other |
| 8407.90.80.00 | Of a power not exceeding 10 kW |
| 8407.90.80.10 | Spark-ignition reciprocating or rotary internal combustion piston engines, having a cylinder capacity of not less than 300 cm³ and a power of not less than 6 kW or more but not more than 20,0 kW, for the manufacture of: , - lawn mowers of subheadings 8433 11, 8433 19 and 8433 20, , - tractors of subheadings 8701 91 90, 8701 92 90 whose main function is that of a lawn mower, , - four stroke mowers with motor of a cylinder capacity of not less than 300 cm³ of subheading 8433 20 10 or , - snowploughs and snow blowers of subheading 8430 20 |
| 8407.90.80.90 | Other |
| 8407.90.90.00 | Of a power exceeding 10 kW |
| 8407.90.90.10 | Spark-ignition reciprocating or rotary internal combustion piston engines, having a cylinder capacity of not less than 300 cm³ and a power of not less than 6 kW or more but not more than 20,0 kW, for the manufacture of: , -lawn mowers of subheadings 8433 11, 8433 19 and 8433 20, , -tractors of subheadings 8701 91 90, 8701 92 90 whose main function is that of a lawn mower, , -four stroke mowers with motor of a cylinder capacity of not less than 300 cm³ of subheading 8433 20 10 or , -snowploughs and snow blowers of subheading 8430 20 |
| 8407.90.90.20 | Compact Liquid Petroleum Gas (LPG) Engine System, with: , - 6 cylinders, , , - an output of 75 kW or more, but not more than 80 kW, , , - inlet and exhaust valves modified to operate continuously in heavy duty applications, , for use in the manufacture of vehicles of heading 8427 |
| 8407.90.90.90 | Other |
| 8408 | Compression-ignition internal combustion piston engines (diesel or semi-diesel engines) |
| 8408.10.00 | Marine propulsion engines |
| - | Used |
| 8408.10.11.00 | For seagoing vessels of headings 8901 to 8906, tugs of subheading 8904 00 10 and warships of subheading 8906 10 00 |
| 8408.10.19.00 | Other |
| - | New, of a power |
| - | Not exceeding 50 kW |
| 8408.10.23.00 | For seagoing vessels of headings 8901 to 8906, tugs of subheading 8904 00 10 and warships of subheading 8906 10 00 |
| 8408.10.27.00 | Other |
| - | Exceeding 50 kW but not exceeding 100 kW |
| 8408.10.31.00 | For seagoing vessels of headings 8901 to 8906, tugs of subheading 8904 00 10 and warships of subheading 8906 10 00 |
| 8408.10.39.00 | Other |
| - | Exceeding 100 kW but not exceeding 200 kW |
| 8408.10.41.00 | For seagoing vessels of headings 8901 to 8906, tugs of subheading 8904 00 10 and warships of subheading 8906 10 00 |
| 8408.10.49.00 | Other |
| - | Exceeding 200 kW but not exceeding 300 kW |
| 8408.10.51.00 | For seagoing vessels of headings 8901 to 8906, tugs of subheading 8904 00 10 and warships of subheading 8906 10 00 |
| 8408.10.59.00 | Other |
| - | Exceeding 300 kW but not exceeding 500 kW |
| 8408.10.61.00 | For seagoing vessels of headings 8901 to 8906, tugs of subheading 8904 00 10 and warships of subheading 8906 10 00 |
| 8408.10.69.00 | Other |
| - | Exceeding 500 kW but not exceeding 1 000 kW |
| 8408.10.71.00 | For seagoing vessels of headings 8901 to 8906, tugs of subheading 8904 00 10 and warships of subheading 8906 10 00 |
| 8408.10.79.00 | Other |
| - | Exceeding 1 000 kW but not exceeding 5 000 kW |
| 8408.10.81.00 | For seagoing vessels of headings 8901 to 8906, tugs of subheading 8904 00 10 and warships of subheading 8906 10 00 |
| 8408.10.89.00 | Other |
| - | Exceeding 5 000 kW |
| 8408.10.91.00 | For seagoing vessels of headings 8901 to 8906, tugs of subheading 8904 00 10 and warships of subheading 8906 10 00 |
| 8408.10.99.00 | Other |
| 8408.20.00 | Engines of a kind used for the propulsion of vehicles of Chapter 87 |
| 8408.20.10.00 | For the industrial assembly of: pedestrian-controlled tractors of subheading 8701 10; motor vehicles of heading 8703; motor vehicles of heading 8704 with an engine of a cylinder capacity of less than 2 500 cm³; motor vehicles of heading 8705 |
| - | Other |
| - | For wheeled agricultural or forestry tractors, of a power |
| 8408.20.31.00 | Not exceeding 50 kW |
| 8408.20.35.00 | Exceeding 50 kW but not exceeding 100 kW |
| 8408.20.37.00 | Exceeding 100 kW |
| - | For other vehicles of Chapter 87, of a power |
| 8408.20.51.00 | Not exceeding 50 kW |
| 8408.20.55.00 | Exceeding 50 kW but not exceeding 100 kW |
| 8408.20.57.00 | Exceeding 100 kW but not exceeding 200 kW |
| 8408.20.99.00 | Exceeding 200 kW |
| 8408.90.00 | Other engines |
| 8408.90.21.00 | For rail traction |
| - | Other |
| 8408.90.27.00 | Used |
| 8408.90.27.10 | For use in civil aircraft |
| 8408.90.27.90 | Other |
| - | New, of a power |
| 8408.90.41.00 | Not exceeding 15 kW |
| 8408.90.41.10 | For use in civil aircraft |
| 8408.90.41.20 | Diesel engines of a power of not more than 15 kW, with 2 or 3 cylinders, for use in the manufacture of vehicle mounted temperature control systems |
| 8408.90.41.90 | Other |
| 8408.90.43.00 | Exceeding 15 kW but not exceeding 30 kW |
| 8408.90.43.10 | For use in civil aircraft |
| 8408.90.43.20 | Diesel engines of a power of not more than 30 kW, with 4 cylinders, for use in the manufacture of vehicle mounted temperature control systems |
| 8408.90.43.40 | 4 Cylinder, 4 cycle, liquid cooled, compression-ignition engine having:, , - a capacity of not more than 3 850 cm³, and, , - a rated output of 15 kW or more but not more than 85 kW,, for use in the manufacture of vehicles of heading 8427 |
| 8408.90.43.90 | Other |
| 8408.90.45.00 | Exceeding 30 kW but not exceeding 50 kW |
| 8408.90.45.10 | For use in civil aircraft |
| 8408.90.45.30 | 4 Cylinder, 4 cycle, liquid cooled, compression-ignition engine having:, , - a capacity of not more than 3 850 cm³, and, , - a rated output of 15 kW or more but not more than 85 kW,, for use in the manufacture of vehicles of heading 8427 |
| 8408.90.45.90 | Other |
| 8408.90.47.00 | Exceeding 50 kW but not exceeding 100 kW |
| 8408.90.47.10 | For use in civil aircraft |
| - | Other |
| 8408.90.47.50 | 4 Cylinder, 4 cycle, liquid cooled, compression-ignition engine having:, , - a capacity of not more than 3 850 cm³, and, , - a rated output of 15 kW or more but not more than 85 kW,, for use in the manufacture of vehicles of heading 8427 |
| 8408.90.47.99 | Other |
| 8408.90.61.00 | Exceeding 100 kW but not exceeding 200 kW |
| 8408.90.61.10 | For use in civil aircraft |
| 8408.90.61.90 | Other |
| 8408.90.65.00 | Exceeding 200 kW but not exceeding 300 kW |
| 8408.90.65.10 | For use in civil aircraft |
| 8408.90.65.20 | Compression-ignition internal combustion piston engines:, , -of the inline type,, , -with a cylinder capacity of 7 000 cm³ or more but not more than 18 100 cm³,, , -with a power of 205 kW or more but not more than 597 kW,, , -with an exhaust after-treatment module,, , -with external width/height/depth dimensions of not more than 1 310/1 300/1 040 mm or 2 005/1 505/1 300 mm or 2 005/1 505/1 800 mm,, for use in the manufacture of crushing, screening, separation or compost turning machines |
| 8408.90.65.90 | Other |
| 8408.90.67.00 | Exceeding 300 kW but not exceeding 500 kW |
| 8408.90.67.10 | For use in civil aircraft |
| 8408.90.67.20 | Compression-ignition internal combustion piston engines:, , -of the inline type,, , -with a cylinder capacity of 7 000 cm³ or more but not more than 18 100 cm³,, , -with a power of 205 kW or more but not more than 597 kW,, , -with an exhaust after-treatment module,, , -with external width/height/depth dimensions of not more than 1 310/1 300/1 040 mm or 2 005/1 505/1 300 mm or 2 005/1 505/1 800 mm,, for use in the manufacture of crushing, screening, separation or compost turning machines |
| 8408.90.67.90 | Other |
| 8408.90.81.00 | Exceeding 500 kW but not exceeding 1 000 kW |
| 8408.90.81.10 | For use in civil aircraft |
| 8408.90.81.20 | Compression-ignition internal combustion piston engines:, , -of the inline type,, , -with a cylinder capacity of 7 000 cm³ or more but not more than 18 100 cm³,, , -with a power of 205 kW or more but not more than 597 kW,, , -with an exhaust after-treatment module,, , -with external width/height/depth dimensions of not more than 1 310/1 300/1 040 mm or 2 005/1 505/1 300 mm or 2 005/1 505/1 800 mm,, for use in the manufacture of crushing, screening, separation or compost turning machines |
| 8408.90.81.90 | Other |
| 8408.90.85.00 | Exceeding 1 000 kW but not exceeding 5 000 kW |
| 8408.90.85.10 | For use in civil aircraft |
| 8408.90.85.90 | Other |
| 8408.90.89.00 | Exceeding 5 000 kW |
| 8408.90.89.10 | For use in civil aircraft |
| 8408.90.89.90 | Other |
| 8409 | Parts suitable for use solely or principally with the engines of heading 8407 or 8408 |
| 8409.10.00 | For aircraft engines |
| 8409.10.00.10 | For engines for use in civil aircraft |
| 8409.10.00.20 | Intended to be fitted in aircraft imported duty free or built within the Community |
| 8409.10.00.90 | Other |
| - | Other |
| 8409.91.00 | Suitable for use solely or principally with spark-ignition internal combustion piston engines |
| 8409.91.00.25 | Air intake module for engine cylinders consisting of:, , -a suction pipe,, , -a pressure sensor,, , -an electric throttle,, , -hoses,, , -brackets,, for use in the manufacture of engines of motor vehicles |
| 8409.91.00.33 | Camshaft carrier for a spark-ignition piston internal combustion engine, made of ADC12 aluminium alloy, with:, , -a weight of 4,0 kg or more but not more than 5,5 kg,, , -a wall thickness of 2,0 mm or more but not more than 6,0 mm,, for use in the manufacture of motor vehicle engines |
| 8409.91.00.35 | Fuel distribution pipe complete consisting of rail pipe, high pressure sensor and injectors for direct gasoline fuel injection with:, , -an operating pressure of not more than 22,5 MPa,, , -solenoid direct injector,, , -analog pressure sensor for not more than 22,5 MPa |
| 8409.91.00.38 | Crankcase for 4-cylinder spark-ignition piston internal combustion engine, made of ADC12 aluminium alloy, for use in the manufacture of motor vehicle engines |
| 8409.91.00.40 | Fuel injector with solenoid valve for optimized atomization in the combustion chamber for use in the manufacture of spark-ignition internal combustion piston engines of motor vehicles |
| 8409.91.00.45 | Metal alloy intake and exhaust valve, with a Rockwell hardness HRC 20 or more, for use in the manufacture of spark or compression ignition engines of motor vehicles |
| 8409.91.00.50 | Exhaust manifold with turbine housing of turbochargers, with a hole to insert a turbine wheel, whereby the hole has a diameter of 28mm or more, but not more than 181mm |
| 8409.91.00.53 | The exhaust gas recirculation assembly consisting of:, , -a control unit,, , -an air throttle,, , -an intake pipe,, , -an outlet hose,, for use in the manufacture of spark-ignition or compression-ignition combustion engines of motor vehicles |
| 8409.91.00.55 | Nozzle body for the regulation of angle and distribution of fuel injection:, , -of a cylindrical shape,, , -made of stainless steel,, , -with 4 or more, but not more than 16 holes,, , -with a flow rate of 100 cm³/minute or more, but not more than 500 cm³/minute |
| 8409.91.00.70 | Inlet manifold, exclusively for use in the manufacture of the motor vehicles with:, -a width of 40 mm or more but not more than 70 mm,, -valves length of 250 mm or more but not more than 350 mm,, -air volume of 5,2 litres, and, -an electrical flow control system that provides maximum performance at more than 3200 rpm |
| 8409.91.00.75 | Housing of fuel injection valve for generating an electromagnetic field to actuate the injection valve with:, , -an inlet diameter of 2 mm or more, but not more than 10 mm,, , -an outlet diameter of 2 mm or more, but not more than 10 mm,, , -an electric coil with a resistance of 10 Ω or more, but not more than 15 Ω, which ends in an electrical connection,, , -a plastic covering moulded around a stainless steel tube |
| 8409.91.00.80 | Nozzle needle for opening and closing the flow of fuel in the engine, with:, , -2 holes,, , -4 grooves,, , -a diameter of 3 mm or more, but not more than 6 mm,, , -a length of 25 mm or more, but not more than 35 mm,, , -made of stainless steel with hard-chrome plating |
| 8409.91.00.85 | Cylinder head blank for a four cylinder engine with 10 cores, made of aluminium alloy EN AC-45500, with:, , -no other components,, , -a hardness of 52 HRB or more,, , -casting defects size of not more than 0,4 mm and not more than 10 defects per cm²,, , -a dendrite arm space in combustion chamber of not more than 25 μm,, , -a double deck water jacket design and, , -a weight of 18 kg or more but not more than 19 kg,, , -a length of 506 mm or more but not more than 510 mm,, , -a height of 282 mm or more but not more than 286 mm,, , -a width of 143,7 mm or more but not more than 144,3 mm,, in one single consignment of 1 000 pieces or more |
| 8409.91.00.90 | Other |
| 8409.99.00 | Other |
| 8409.99.00.10 | Injectors with solenoid valve for optimised atomisation in the engine combustion chamber |
| 8409.99.00.25 | Hoses assembly for fuel return from injectors to engine fuel unit consisting of at least:, , - three rubber hoses, whether or not with a protective braided sleeving,, , - three connectors for connecting fuel injectors,, , - five metal clamps,, , - one T-shaped plastic joint,, for use in the manufacture of engines of motor vehicles |
| 8409.99.00.55 | Exhaust manifold with turbine housing of turbochargers, with a hole to insert a turbine wheel, whereby the hole has a diameter of 28mm or more, but not more than 181mm |
| 8409.99.00.65 | The exhaust gas recirculation assembly consisting of:, , -a control unit,, , -an air throttle,, , -an intake pipe,, , -an outlet hose,, for use in the manufacture of spark-ignition or compression-ignition combustion engines of motor vehicles |
| 8409.99.00.70 | Metal alloy intake and exhaust valve, with a Rockwell hardness HRC 20 or more, for use in the manufacture of spark or compression ignition engines of motor vehicles |
| 8409.99.00.75 | High pressure fuel rail of galvanized ferrite-pearlite steel with:, , -at least one pressure sensor and one valve,, , -a length of 314 mm or more but not more than 322 mm,, , -an operating pressure not more than 225 MPa,, , -an inlet temperature not more than 95°C,, , -ambient temperature of -45°C or more but not more than 145°C,, for use in the manufacture of compression ignition engines of motor vehicles |
| 8409.99.00.90 | Other |
| 8410 | Hydraulic turbines, water wheels, and regulators therefor |
| - | Hydraulic turbines and water wheels |
| 8410.11.00 | Of a power not exceeding 1 000 kW |
| 8410.12.00 | Of a power exceeding 1 000 kW but not exceeding 10 000 kW |
| 8410.13.00 | Of a power exceeding 10 000 kW |
| 8410.90.00 | Parts, including regulators |
| 8411 | Turbojets, turbopropellers and other gas turbines |
| - | Turbojets |
| 8411.11.00 | Of a thrust not exceeding 25 kN |
| 8411.11.00.10 | For use in civil aircraft |
| 8411.11.00.20 | Intended to be fitted in aircraft imported duty free or built within the Community |
| 8411.11.00.90 | Other |
| 8411.12.00 | Of a thrust exceeding 25 kN |
| 8411.12.10.00 | Of a thrust exceeding 25 kN but not exceeding 44 kN |
| 8411.12.10.10 | For use in civil aircraft |
| 8411.12.10.20 | Intended to be fitted in aircraft imported duty free or built within the Community |
| 8411.12.10.90 | Other |
| 8411.12.30.00 | Of a thrust exceeding 44 kN but not exceeding 132 kN |
| 8411.12.30.10 | For use in civil aircraft |
| 8411.12.30.20 | Intended to be fitted in aircraft imported duty free or built within the Community |
| 8411.12.30.90 | Other |
| 8411.12.80.00 | Of a thrust exceeding 132 kN |
| 8411.12.80.10 | For use in civil aircraft |
| 8411.12.80.20 | Intended to be fitted in aircraft imported duty free or built within the Community |
| 8411.12.80.90 | Other |
| - | Turbopropellers |
| 8411.21.00 | Of a power not exceeding 1 100 kW |
| 8411.21.00.10 | For use in civil aircraft |
| 8411.21.00.20 | Intended to be fitted in aircraft imported duty free or built within the Community |
| 8411.21.00.90 | Other |
| 8411.22.00 | Of a power exceeding 1 100 kW |
| 8411.22.20.00 | Of a power exceeding 1 100 kW but not exceeding 3 730 kW |
| 8411.22.20.10 | For use in civil aircraft |
| 8411.22.20.20 | Intended to be fitted in aircraft imported duty free or built within the Community |
| 8411.22.20.90 | Other |
| 8411.22.80.00 | Of a power exceeding 3 730 kW |
| 8411.22.80.10 | For use in civil aircraft |
| 8411.22.80.20 | Intended to be fitted in aircraft imported duty free or built within the Community |
| 8411.22.80.90 | Other |
| - | Other gas turbines |
| 8411.81.00 | Of a power not exceeding 5 000 kW |
| 8411.81.00.10 | For use in civil aircraft |
| 8411.81.00.90 | Other |
| 8411.82.00 | Of a power exceeding 5 000 kW |
| 8411.82.20.00 | Of a power exceeding 5 000 kW but not exceeding 20 000 kW |
| 8411.82.20.10 | For use in civil aircraft |
| 8411.82.20.90 | Other |
| 8411.82.60.00 | Of a power exceeding 20 000 kW but not exceeding 50 000 kW |
| 8411.82.60.10 | For use in civil aircraft |
| 8411.82.60.90 | Other |
| 8411.82.80.00 | Of a power exceeding 50 000 kW |
| 8411.82.80.10 | For use in civil aircraft |
| 8411.82.80.90 | Other |
| - | Parts |
| 8411.91.00 | Of turbojets or turbopropellers |
| 8411.91.00.10 | For use in civil aircraft |
| 8411.91.00.20 | Intended to be fitted in aircraft imported duty free or built within the Community |
| 8411.91.00.90 | Other |
| 8411.99.00 | Other |
| 8411.99.00.10 | Of gas turbines, for use in civil aircraft |
| 8411.99.00.11 | Other |
| 8411.99.00.20 | Wheel-shaped gas turbine component with blades, of a kind used in turbochargers:, , - of a precision-cast nickel based alloy complying with standard DIN G- NiCr13Al6MoNb or DIN G- NiCr13Al16MoNb or DIN G- NiCo10W10Cr9AlTi or DIN G- NiCr12Al6MoNb or AMS AISI:686,, , - with a heat-resistance of not more than 1 100 °C,, , - with a diameter of 28 mm or more, but not more than 180 mm,, , - with a height of 20 mm or more, but not more than 150 mm |
| 8411.99.00.30 | Turbine housing of turbochargers, with a hole to insert a turbine wheel, whereby the hole has a diameter of 28mm or more, but not more than 181mm |
| 8411.99.00.99 | Other |
| 8412 | Other engines and motors |
| 8412.10.00 | Reaction engines other than turbojets |
| 8412.10.00.10 | For use in civil aircraft |
| 8412.10.00.20 | Intended to be fitted in aircraft imported duty free or built within the Community |
| 8412.10.00.90 | Other |
| - | Hydraulic power engines and motors |
| 8412.21.00 | Linear acting (cylinders) |
| 8412.21.20.00 | Hydraulic systems |
| 8412.21.20.10 | For use in civil aircraft |
| 8412.21.20.90 | Other |
| 8412.21.80.00 | Other |
| 8412.21.80.10 | For use in civil aircraft |
| 8412.21.80.90 | Other |
| 8412.29.00 | Other |
| 8412.29.20.00 | Hydraulic systems |
| 8412.29.20.10 | For use in civil aircraft |
| 8412.29.20.90 | Other |
| - | Other |
| 8412.29.81.00 | Hydraulic fluid power motors |
| 8412.29.81.10 | For use in civil aircraft |
| 8412.29.81.90 | Other |
| 8412.29.89.00 | Other |
| 8412.29.89.10 | For use in civil aircraft |
| 8412.29.89.90 | Other |
| - | Pneumatic power engines and motors |
| 8412.31.00 | Linear acting (cylinders) |
| 8412.31.00.10 | For use in civil aircraft |
| 8412.31.00.90 | Other |
| 8412.39.00 | Other |
| 8412.39.00.10 | For use in civil aircraft |
| 8412.39.00.20 | Actuator for a single-stage turbocharger, with:, - ¬a pressure inlet pipe and a control rod with a working stroke of 15mm or more but not more than 40mm,, - a maximum length of the actuator including control rod of not more than 400mm,, - ¬a maximum diameter of the can at the widest point of not more than 140mm, and, - a maximum height of the can without control rod of not more than 140mm |
| 8412.39.00.90 | Other |
| 8412.80.00 | Other |
| 8412.80.10.00 | Steam or other vapour power engines |
| 8412.80.80.00 | Other |
| 8412.80.80.10 | For use in civil aircraft |
| 8412.80.80.90 | Other |
| 8412.90.00 | Parts |
| 8412.90.20.00 | Of reaction engines other than turbojets |
| 8412.90.20.10 | For use in civil aircraft |
| 8412.90.20.20 | Intended to be fitted in aircraft imported duty free or built within the Community |
| 8412.90.20.90 | Other |
| 8412.90.40.00 | Of hydraulic power engines and motors |
| 8412.90.40.10 | For use in civil aircraft |
| 8412.90.40.90 | Other |
| 8412.90.80.00 | Other |
| 8412.90.80.10 | For use in civil aircraft |
| 8412.90.80.20 | Bedplate made of solution strengthened ductile iron castings (SSDI), for anchoring and aligning the drive train (gearbox, pedestal bearing, rotor shaft) of a wind turbine with:, - a length of 3,5 m or more but not more than 4,5 m,, - a width of 2 m or more but not more than 4,2 m,, - a height of 1 m or more, but not more than 1,3 m,, - a weight of 11 tons or more but not more than 21,5 tons,, - mounting bores for yawdrive,, - mounting flange for gearbox support,, - drivetrain mount,, - different screw sockets |
| 8412.90.80.30 | Gearbox support used as a support and load-carrying component between the gearbox and the bedplate of a wind turbine, made of solution strengthened ductile iron castings (SSDI), with:, , -a diameter of 2 m or more, but not more than 5 m,, , -a weight of 2 tons or more but not more than 7 tons |
| 8412.90.80.90 | Other |
| 8413 | Pumps for liquids, whether or not fitted with a measuring device; liquid elevators |
| - | Pumps fitted or designed to be fitted with a measuring device |
| 8413.11.00 | Pumps for dispensing fuel or lubricants, of the type used in filling stations or in garages |
| 8413.19.00 | Other |
| 8413.19.00.10 | For use in civil aircraft |
| 8413.19.00.90 | Other |
| 8413.20.00 | Handpumps, other than those of subheading 8413 11 or 8413 19 |
| 8413.20.00.10 | For use in civil aircraft |
| 8413.20.00.90 | Other |
| 8413.30.00 | Fuel, lubricating or cooling medium pumps for internal combustion piston engines |
| 8413.30.20.00 | Injection pumps |
| 8413.30.20.10 | For use in civil aircraft |
| 8413.30.20.30 | Single-cylinder radial-piston high pressure pump for gasoline direct injection with:, , - an operating pressure of 200 bar or more, but not more than 350 bar,, , - a flow control, and, , - a pressure relief valve,, for use in the manufacture of engines of motor vehicles |
| 8413.30.20.40 | High-pressure plunger pump for direct diesel injection, with:, , -an operating pressure of not more than 275 MPa,, , -a camshaft,, , -a fluid discharging of 15 cm³ per minute or more, but not more than 1 800 cm³ per minute,, , -an electric pressure regulating valve |
| 8413.30.20.50 | High-pressure plunger pump for direct diesel injection:, , -with an operating pressure of not more than 275 MPa,, , -designed to contact the crankshaft,, , -with an electromagnetic valve |
| 8413.30.20.60 | High-pressure plunger pump for direct petrol injection:, , -with an operating pressure of not more than 90 MPa,, , -designed to contact the crankshaft,, , -with an electromagnetic valve |
| 8413.30.20.90 | Other |
| 8413.30.80.00 | Other |
| 8413.30.80.10 | For use in civil aircraft |
| 8413.30.80.20 | Electric water pump ensuring the functionality of the water circuit also when the motor is temporarily switched off, for operating DC voltage of 9 V or more but not more than 16 V, with:, , -capacity - pressure 0,075 MPa at 3 800 rpm,, , -discharge of 12 l/min,, , -whether or not with connecting cable with connector, and, , -mounting bracket, , for use in the manufacture of goods of Chapter 87 |
| 8413.30.80.90 | Other |
| 8413.40.00 | Concrete pumps |
| 8413.50.00 | Other reciprocating positive displacement pumps |
| 8413.50.20.00 | Hydraulic units |
| 8413.50.20.10 | For use in civil aircraft |
| 8413.50.20.90 | Other |
| 8413.50.40.00 | Dosing and proportioning pumps |
| 8413.50.40.10 | For use in civil aircraft |
| 8413.50.40.90 | Other |
| - | Other |
| - | Piston pumps |
| 8413.50.61.00 | Hydraulic fluid power |
| 8413.50.61.10 | For use in civil aircraft |
| 8413.50.61.90 | Other |
| 8413.50.69.00 | Other |
| 8413.50.69.10 | For use in civil aircraft |
| 8413.50.69.90 | Other |
| 8413.50.80.00 | Other |
| 8413.50.80.10 | For use in civil aircraft |
| 8413.50.80.90 | Other |
| 8413.60.00 | Other rotary positive displacement pumps |
| 8413.60.20.00 | Hydraulic units |
| 8413.60.20.10 | For use in civil aircraft |
| 8413.60.20.90 | Other |
| - | Other |
| - | Gear pumps |
| 8413.60.31.00 | Hydraulic fluid power |
| 8413.60.31.10 | For use in civil aircraft |
| 8413.60.31.90 | Other |
| 8413.60.39.00 | Other |
| 8413.60.39.10 | For use in civil aircraft |
| 8413.60.39.90 | Other |
| - | Vane pumps |
| 8413.60.61.00 | Hydraulic fluid power |
| 8413.60.61.10 | For use in civil aircraft |
| 8413.60.61.90 | Other |
| 8413.60.69.00 | Other |
| 8413.60.69.10 | For use in civil aircraft |
| 8413.60.69.90 | Other |
| 8413.60.70.00 | Screw pumps |
| 8413.60.70.10 | For use in civil aircraft |
| 8413.60.70.90 | Other |
| 8413.60.80.00 | Other |
| 8413.60.80.10 | For use in civil aircraft |
| 8413.60.80.90 | Other |
| 8413.70.00 | Other centrifugal pumps |
| - | Submersible pumps |
| 8413.70.21.00 | Single-stage |
| 8413.70.29.00 | Multi-stage |
| 8413.70.30.00 | Glandless impeller pumps for heating systems and warm water supply |
| - | Other, with a discharge outlet diameter |
| 8413.70.35.00 | Not exceeding 15 mm |
| 8413.70.35.10 | For use in civil aircraft |
| 8413.70.35.89 | Other |
| - | Exceeding 15 mm |
| 8413.70.45.00 | Channel impeller pumps and side channel pumps |
| 8413.70.45.10 | For use in civil aircraft |
| 8413.70.45.90 | Other |
| - | Radial flow pumps |
| - | Single-stage |
| - | With single entry impeller |
| 8413.70.51.00 | Monobloc |
| 8413.70.51.10 | For use in civil aircraft |
| 8413.70.51.20 | Electric brushless direct current motor with single-stage, radial flow pump centrifugal single entry impeller mounted on motor's shaft and volute with integrated heater of nominal power of 1800 W and soldered safety devices, monobloc with the motor, with:, , -a discharge outlet diameter of 20 mm or more,, , -9 slots stator,, , -6 pole rotor,, , -rated power of 95 W,, , -volute with straight outlet,, , -rotor chamber without sand filter |
| 8413.70.51.30 | Electric brushless direct current motor with single-stage, radial flow pump centrifugal single entry impeller mounted on motor's shaft and volute with integrated heater of nominal power of 1800 W and soldered safety devices, monobloc with the motor, with:, , -a discharge outlet diameter of 20 mm or more,, , -9 slots stator,, , -6 pole rotor,, , -rated power of 95 W,, , -volute with clamped rubber hose outlet,, , -rotor chamber without sand filter |
| 8413.70.51.40 | Electric brushless direct current motor with single-stage, radial flow pump centrifugal single entry impeller mounted on motor's shaft, monobloc with the motor, volute with integrated heater, with:, , -a discharge outlet diameter of 20 mm or more,, , -9 slots square or chain pole stator,, , -6 pole rotor,, , -ferritic or rare earth magnets,, , -rated power of 95 W or 80 W,, , -heater of nominal power of 1800 W and soldered or laser welded safety, devices,, , -volute with or without clamped rubber outlet,, , -rotor chamber with ultrasonic welded sand filter |
| 8413.70.51.90 | Other |
| 8413.70.59.00 | Other |
| 8413.70.59.10 | For use in civil aircraft |
| 8413.70.59.90 | Other |
| 8413.70.65.00 | With more than one entry impeller |
| 8413.70.65.10 | For use in civil aircraft |
| 8413.70.65.90 | Other |
| 8413.70.75.00 | Multi-stage |
| 8413.70.75.10 | For use in civil aircraft |
| 8413.70.75.90 | Other |
| - | Other centrifugal pumps |
| 8413.70.81.00 | Single-stage |
| 8413.70.81.10 | For use in civil aircraft |
| 8413.70.81.90 | Other |
| 8413.70.89.00 | Multi-stage |
| 8413.70.89.10 | For use in civil aircraft |
| 8413.70.89.90 | Other |
| - | Other pumps; liquid elevators |
| 8413.81.00 | Pumps |
| 8413.81.00.10 | For use in civil aircraft |
| 8413.81.00.90 | Other |
| 8413.82.00 | Liquid elevators |
| - | Parts |
| 8413.91.00 | Of pumps |
| 8413.91.00.10 | For use in civil aircraft |
| 8413.91.00.30 | Fuel pump cover:, , - consisting of aluminum alloys,, , - with a diameter of 38 mm or 50 mm,, , - with two concentric, annular grooves formed on its surface,, , - anodized,, of a kind used in motor vehicles with petrol engines |
| 8413.91.00.50 | Pump head for two cylinder high pressure pump made of forged steel, with:, - milled threaded fittings with a diameter of 10 mm or more but not more than 36,8 mm, and, - drilled fuel channels with a diameter of 3,5 mm or more but not more than 10 mm, of a kind used in diesel injection systems |
| 8413.91.00.90 | Other |
| 8413.92.00 | Of liquid elevators |
| 8414 | Air or vacuum pumps, air or other gas compressors and fans; ventilating or recycling hoods incorporating a fan, whether or not fitted with filters; gas-tight biological safety cabinets, whether or not fitted with filters |
| 8414.10.00 | Vacuum pumps |
| 8414.10.15.00 | Of a kind used for the manufacture of semiconductors or solely or principally used for the manufacture of flat panel displays |
| - | Other |
| 8414.10.25.00 | Rotary piston pumps, sliding vane rotary pumps, molecular drag pumps and Roots pumps |
| 8414.10.25.10 | For use in civil aircraft |
| 8414.10.25.30 | Tandem pump consisting of:, , -an oil pump with displacement of 21,6 cc/rev (± 2 cc/rev) and working pressure 1,5 bar at 1 000 revolutions per minute,, , -vacuum pump with displacement of 120 cc/rev (± 12 cc/rev) and performance of -666 mbar in 6 seconds at 750 revolutions per minute, for use in the manufacture of engines of motor vehicles |
| 8414.10.25.90 | Other |
| - | Other |
| 8414.10.81.00 | Diffusion pumps, cryopumps and absorption pumps |
| 8414.10.81.10 | For use in civil aircraft |
| 8414.10.81.90 | Other |
| 8414.10.89.00 | Other |
| 8414.10.89.10 | For use in civil aircraft |
| 8414.10.89.30 | Electric vacuum pump with:, -Controller Area Network (CAN bus),, -whether or not with a rubber hose,, -a connecting cable with connector,, -a mounting bracket, for use in the manufacture of goods of Chapter 87 |
| 8414.10.89.90 | Other |
| 8414.20.00 | Hand- or foot-operated air pumps |
| 8414.20.20.00 | Handpumps for cycles |
| 8414.20.80.00 | Other |
| 8414.20.80.10 | For use in civil aircraft |
| 8414.20.80.90 | Other |
| 8414.30.00 | Compressors of a kind used in refrigerating equipment |
| 8414.30.20.00 | Of a power not exceeding 0,4 kW |
| 8414.30.20.10 | For use in civil aircraft |
| 8414.30.20.90 | Other |
| - | Of a power exceeding 0,4 kW |
| 8414.30.81.00 | Hermetic or semi-hermetic |
| 8414.30.81.10 | For use in civil aircraft |
| - | Other |
| 8414.30.81.50 | Hermetic or semi-hermetic variable-speed electric scroll compressors, with a nominal power rating of 0,5 kW or more but not more than 10 kW, with a displacement volume of not more than 35 cm³, of the type used in refrigeration equipment |
| 8414.30.81.60 | Hermetic rotary compressors for either hydrofluorocarbon (HFC) or hydrocarbon refrigerants:, - driven by ‘on-off’ single phase alternate current (AC) or ‘brushless direct current’ (BLDC) variable speed motors,, - with a nominal power rating of not more than 1,5kW,, - a rated voltage of 100V or more but not more than 240V,, - with a height of not more than 300mm,, - an external diameter of not more than 150mm,, - with a unit weight of not more than 15kg,, for use in the manufacture of heat pumps for household appliances, including clothes dryers |
| 8414.30.81.89 | Other |
| 8414.30.89.00 | Other |
| 8414.30.89.10 | For use in civil aircraft |
| 8414.30.89.20 | Vehicle air conditioning system part, consisting of an open shaft reciprocating compressor of a power of more than 0,4 kW but not more than 10 kW |
| 8414.30.89.30 | Open shaft, scroll type compressor with clutch assembly, of a power of more than 0,4 kW, for air conditioning in vehicles, for use in the manufacture of motor vehicles of Chapter 87 |
| 8414.30.89.90 | Other |
| 8414.40.00 | Air compressors mounted on a wheeled chassis for towing |
| 8414.40.10.00 | Giving a flow per minute not exceeding 2 m³ |
| 8414.40.90.00 | Giving a flow per minute exceeding 2 m³ |
| - | Fans |
| 8414.51.00 | Table, floor, wall, window, ceiling or roof fans, with a self-contained electric motor of an output not exceeding 125 W |
| 8414.51.00.10 | For use in civil aircraft |
| 8414.51.00.90 | Other |
| 8414.59.00 | Other |
| 8414.59.15.00 | Fans of a kind used solely or principally for cooling microprocessors, telecommunication apparatus, automatic data processing machines or units of automatic data processing machines |
| - | Other |
| 8414.59.25.00 | Axial fans |
| 8414.59.25.10 | For use in civil aircraft |
| 8414.59.25.90 | Other |
| 8414.59.35.00 | Centrifugal fans |
| 8414.59.35.10 | For use in civil aircraft |
| 8414.59.35.20 | Radial fan, with:, -a dimension of 25mm (height) x 85mm (width) x 85mm (depth),, -a weight of 120 g,, -a rated voltage of 13,6 VDC (direct current voltage),, -an operating voltage of 9 VDC or more but not more than 16 VDC (direct current voltage),, -a rated current of 1,1 A (TYP),, -a rated power of 15 W,, -a rotation speed of 500 RPM (revolutions per minute) or more but not more than 4800 RPM (revolutions per minute) (free flow),, -an air flow of not more than 17,5 litre/s,, -an air pressure of not more than16 mm H2O ≈ 157 Pa,, -an overall sound pressure of not more than 58 dB(A) at 4800 RPM (revolutions per minute), and, with a FIN (Fan Interconnect Network) interface for communication with the heating and air-conditioning control unit used in car seat ventilation systems |
| 8414.59.35.30 | Electric blower for cooling the high-voltage battery of a hybrid passenger car with:, , -a control unit,, , -MOSFET inverter,, , -a voltage of 9 V or more but not more than 16 V,, , -ambient temperature of - 40 °C or more, but not more than 80 °C,, for use in the manufacture of hybrid passenger cars |
| 8414.59.35.90 | Other |
| 8414.59.95.00 | Other |
| 8414.59.95.10 | For use in civil aircraft |
| 8414.59.95.90 | Other |
| 8414.60.00 | Hoods having a maximum horizontal side not exceeding 120 cm |
| 8414.70.00 | Gas-tight biological safety cabinets |
| 8414.80.00 | Other |
| - | Turbo-compressors |
| 8414.80.11.00 | Single-stage |
| 8414.80.11.10 | For use in civil aircraft |
| 8414.80.11.90 | Other |
| 8414.80.19.00 | Multi-stage |
| 8414.80.19.10 | For use in civil aircraft |
| 8414.80.19.90 | Other |
| - | Reciprocating displacement compressors, having a gauge pressure capacity of |
| - | Not exceeding 15 bar, giving a flow per hour |
| 8414.80.22.00 | Not exceeding 60 m³ |
| 8414.80.22.10 | For use in civil aircraft |
| 8414.80.22.20 | Air membrane compressor with:, , - a flow of 4,5 l/min or more, but not more than 12 l/min,, , - power input of not more than 14 W, and, , - a gauge pressure capacity not exceeding 400 hPa (0,4 bar), of a kind used in the production of motor vehicle seats |
| 8414.80.22.90 | Other |
| 8414.80.28.00 | Exceeding 60 m³ |
| 8414.80.28.10 | For use in civil aircraft |
| 8414.80.28.90 | Other |
| - | Exceeding 15 bar, giving a flow per hour |
| 8414.80.51.00 | Not exceeding 120 m³ |
| 8414.80.51.10 | For use in civil aircraft |
| 8414.80.51.90 | Other |
| 8414.80.59.00 | Exceeding 120 m³ |
| 8414.80.59.10 | For use in civil aircraft |
| 8414.80.59.90 | Other |
| - | Rotary displacement compressors |
| 8414.80.73.00 | Single-shaft |
| 8414.80.73.10 | For use in civil aircraft |
| - | Other |
| 8414.80.73.30 | Hermetic rotary compressors for either hydrofluorocarbon (HFC) or hydrocarbon refrigerants:, - driven by ‘on-off’ single phase alternate current (AC) or ‘brushless direct current’ (BLDC) variable speed motors,, - with a nominal power rating of not more than 1,5kW,, - a rated voltage of 100V or more but not more than 240V,, - with a height of not more than 300mm,, - an external diameter of not more than 150mm,, - with a unit weight of not more than 15kg,, for use in the manufacture of heat pumps for household appliances, including clothes dryers |
| 8414.80.73.50 | Hermetic heat pump compressor, for R134A or R450A as refrigerant:, , -not charged with refrigerant,, , -pre-charged with the lubricant oil,, , -with the Single Phase Induction Motor PSC (Permanent Split Capacitor),, , -having bottom side suction connection and top side discharge connection,, , -with displacement 8,05 cm³ or higher, but not higher than 8,25 cm³,, , -running at 2 800 rpm or faster, but not faster than 3 100 rpm, and, , -with a cooling capacity of 920 W or higher, but not higher than 990 W in ASHRAE conditions |
| 8414.80.73.89 | Other |
| - | Multi-shaft |
| 8414.80.75.00 | Screw compressors |
| 8414.80.75.10 | For use in civil aircraft |
| 8414.80.75.90 | Other |
| 8414.80.78.00 | Other |
| 8414.80.78.10 | For use in civil aircraft |
| 8414.80.78.90 | Other |
| 8414.80.80.00 | Other |
| 8414.80.80.10 | For use in civil aircraft |
| 8414.80.80.90 | Other |
| 8414.90.00 | Parts |
| 8414.90.00.10 | For use in civil aircraft |
| 8414.90.00.15 | Fan assembly made of aluminium and magnesium alloy:, , -with an outer diameter of 54 mm or more but not more than 130 mm,, , -with a height of 8 mm or more but not more than 30 mm,, , -with two discs connected by blades of involute shape,, , -with or without dowel, and with or without washer,, for use in the manufacture of electromotors |
| 8414.90.00.20 | Aluminium pistons, for incorporation into compressors of air conditioning machines of motor vehicles |
| 8414.90.00.25 | Scroll type compressor housing of an aluminium alloy of a kind with: , , -a heat resistance of 200 °C or more but not more than 250 °C,, , -one or more fixing points suitable for mounting an actuator,, for use in the manufacture of turbochargers |
| 8414.90.00.30 | Pressure-regulating system, for incorporation into compressors of air conditioning machines of motor vehicles |
| 8414.90.00.40 | Drive part, for compressors of air conditioning machines of motor vehicles |
| 8414.90.00.80 | Turbocharger wheel housing of cast aluminium alloy or cast iron:, - with a heat resistance up to 400°C,, - with a hole of 30 mm or more but not more than 300 mm for the insertion of the compressor wheel,, for use in the automotive industry |
| 8414.90.00.90 | Other |
| 8415 | Air-conditioning machines, comprising a motor-driven fan and elements for changing the temperature and humidity, including those machines in which the humidity cannot be separately regulated |
| 8415.10.00 | Of a kind designed to be fixed to a window, wall, ceiling or floor, self-contained or "split-system" |
| 8415.10.10.00 | Self-contained |
| 8415.10.10.10 | Pre-charged with hydrofluorocarbons (HFCs) |
| 8415.10.10.90 | Other |
| 8415.10.90.00 | Split-system |
| 8415.10.90.10 | Pre-charged with hydrofluorocarbons (HFCs) |
| 8415.10.90.90 | Other |
| 8415.20.00 | Of a kind used for persons, in motor vehicles |
| 8415.20.00.10 | Pre-charged with hydrofluorocarbons (HFCs) |
| 8415.20.00.90 | Other |
| - | Other |
| 8415.81.00 | Incorporating a refrigerating unit and a valve for reversal of the cooling/heat cycle (reversible heat pumps) |
| 8415.81.00.10 | For use in civil aircraft |
| 8415.81.00.11 | Other |
| 8415.81.00.91 | Pre-charged with hydrofluorocarbons (HFCs) |
| 8415.81.00.99 | Other |
| 8415.82.00 | Other, incorporating a refrigerating unit |
| 8415.82.00.10 | For use in civil aircraft |
| 8415.82.00.11 | Other |
| 8415.82.00.91 | Pre-charged with hydrofluorocarbons (HFCs) |
| 8415.82.00.99 | Other |
| 8415.83.00 | Not incorporating a refrigerating unit |
| 8415.83.00.10 | For use in civil aircraft |
| 8415.83.00.90 | Other |
| 8415.90.00 | Parts |
| 8415.90.00.10 | Of air conditioning machines of subheading Nos 8415 81, 8415 82 or 8415 83, for use in civil aircraft |
| 8415.90.00.15 | Electrically welded manifolds for the condenser in automotive air conditioning systems:, , -consisting of a tube produced by stamping an aluminium strip and joining the edges by electric arc welding,, , -containing internal baffles responsible for the proper flow of coolant,, , -with a length of 190 mm or more, but not more than 460 mm,, , -with a diameter of 9 mm or more, but not more than 42 mm,, , -with a weight of 0,01 kg or more, but not more than 0,45 kg,, , -whether or not having aluminium connection blocks,, used in the production of air conditioning systems in vehicles of Chapter 87 |
| 8415.90.00.45 | Aluminium connecting block for automotive air conditioning systems: , , -with a T6 hardening, , , -equipped with round stubs with a circumferential outer groove,, , -with through or non-through holes, made of profiles with an upper radius of 8 mm or more but not more than 11 mm, and a lower radius of 12 mm or more but not more than 17 mm,, , -with a distance between holes of 15 mm or more but not more than 22 mm,, , -with sockets designed for brazing or clamping,, , -with mounting holes for M6 or M8 mounting screw, threaded or not,, , -with a width of 5 mm or more but not more than 16 mm,, , -for connecting a compressor, a condenser, an evaporator, a chiller and other lines |
| 8415.90.00.60 | Flame-soldered aluminium block, for connecting tube with condenser in car air-conditioning systems, with:, -extruded, bent connector lines of aluminium with an external diameter of 5 mm or more, but not more than 25 mm,, -a weight of 0,02 kg or more but not more than 0,25 kg |
| 8415.90.00.65 | Aluminium arc-welded removable receiver dryer, with polyamide and ceramic elements with:, , -a length of 143 mm or more but not more than 292 mm,, , -a diameter of 31 mm or more but not more than 99 mm, , , -with a weight of not less than 0,12 kg and not more than 0,9 kg, , , -a spangle length of not more than 0,2 mm and a thickness of not more than 0,06 mm, and , , -a solid particle diameter of not more than 0,06 mm,, for use in the manufacture of car air-conditioning systems |
| 8415.90.00.91 | Pre-charged with hydrofluorocarbons (HFCs) |
| 8415.90.00.99 | Other |
| 8416 | Furnace burners for liquid fuel, for pulverised solid fuel or for gas; mechanical stokers, including their mechanical grates, mechanical ash dischargers and similar appliances |
| 8416.10.00 | Furnace burners for liquid fuel |
| 8416.10.10.00 | Incorporating an automatic control device |
| 8416.10.90.00 | Other |
| 8416.20.00 | Other furnace burners, including combination burners |
| 8416.20.10.00 | Only for gas, monobloc, incorporating a ventilator and a control device |
| - | Other |
| 8416.20.20.00 | Combination burners |
| 8416.20.80.00 | Other |
| 8416.30.00 | Mechanical stokers, including their mechanical grates, mechanical ash dischargers and similar appliances |
| 8416.90.00 | Parts |
| 8417 | Industrial or laboratory furnaces and ovens, including incinerators, non-electric |
| 8417.10.00 | Furnaces and ovens for the roasting, melting or other heat treatment of ores, pyrites or of metals |
| 8417.20.00 | Bakery ovens, including biscuit ovens |
| 8417.20.10.00 | Tunnel ovens |
| 8417.20.90.00 | Other |
| 8417.80.00 | Other |
| 8417.80.30.00 | Ovens and furnaces for firing ceramic products |
| 8417.80.50.00 | Ovens and furnaces for firing cement, glass or chemical products |
| 8417.80.70.00 | Other |
| 8417.90.00 | Parts |
| 8418 | Refrigerators, freezers and other refrigerating or freezing equipment, electric or other; heat pumps other than air-conditioning machines of heading 8415 |
| 8418.10.00 | Combined refrigerator-freezers, fitted with separate external doors or drawers, or combinations thereof |
| 8418.10.20.00 | Of a capacity exceeding 340 litres |
| 8418.10.20.10 | For use in civil aircraft |
| - | Other |
| 8418.10.20.91 | Pre-charged with hydrofluorocarbons (HFCs) |
| 8418.10.20.99 | Other |
| 8418.10.80.00 | Other |
| 8418.10.80.10 | For use in civil aircraft |
| - | Other |
| 8418.10.80.91 | Pre-charged with hydrofluorocarbons (HFCs) |
| 8418.10.80.99 | Other |
| - | Refrigerators, household type |
| 8418.21.00 | Compression-type |
| 8418.21.10.00 | Of a capacity exceeding 340 litres |
| 8418.21.10.10 | Pre-charged with hydrofluorocarbons (HFCs) |
| 8418.21.10.90 | Other |
| - | Other |
| 8418.21.51.00 | Table model |
| 8418.21.51.10 | Pre-charged with hydrofluorocarbons (HFCs) |
| 8418.21.51.90 | Other |
| 8418.21.59.00 | Building-in type |
| 8418.21.59.10 | Pre-charged with hydrofluorocarbons (HFCs) |
| 8418.21.59.90 | Other |
| - | Other, of a capacity |
| 8418.21.91.00 | Not exceeding 250 litres |
| 8418.21.91.10 | Pre-charged with hydrofluorocarbons (HFCs) |
| 8418.21.91.90 | Other |
| 8418.21.99.00 | Exceeding 250 litres but not exceeding 340 litres |
| 8418.21.99.10 | Pre-charged with hydrofluorocarbons (HFCs) |
| 8418.21.99.90 | Other |
| 8418.29.00 | Other |
| 8418.29.00.10 | Pre-charged with hydrofluorocarbons (HFCs) |
| 8418.29.00.90 | Other |
| 8418.30.00 | Freezers of the chest type, not exceeding 800 litres capacity |
| 8418.30.20.00 | Of a capacity not exceeding 400 litres |
| 8418.30.20.10 | For use in civil aircraft |
| - | Other |
| 8418.30.20.91 | Pre-charged with hydrofluorocarbons (HFCs) |
| 8418.30.20.99 | Other |
| 8418.30.80.00 | Of a capacity exceeding 400 litres but not exceeding 800 litres |
| 8418.30.80.10 | For use in civil aircraft |
| - | Other |
| 8418.30.80.91 | Pre-charged with hydrofluorocarbons (HFCs) |
| 8418.30.80.99 | Other |
| 8418.40.00 | Freezers of the upright type, not exceeding 900 litres capacity |
| 8418.40.20.00 | Of a capacity not exceeding 250 litres |
| 8418.40.20.10 | For use in civil aircraft |
| - | Other |
| 8418.40.20.91 | Pre-charged with hydrofluorocarbons (HFCs) |
| 8418.40.20.99 | Other |
| 8418.40.80.00 | Of a capacity exceeding 250 litres but not exceeding 900 litres |
| 8418.40.80.10 | For use in civil aircraft |
| - | Other |
| 8418.40.80.91 | Pre-charged with hydrofluorocarbons (HFCs) |
| 8418.40.80.99 | Other |
| 8418.50.00 | Other furniture (chests, cabinets, display counters, showcases and the like) for storage and display, incorporating refrigerating or freezing equipment |
| - | Refrigerated showcases and counters (incorporating a refrigerating unit or evaporator) |
| 8418.50.11.00 | For frozen food storage |
| 8418.50.11.10 | Pre-charged with hydrofluorocarbons (HFCs) |
| 8418.50.11.90 | Other |
| 8418.50.19.00 | Other |
| 8418.50.19.10 | Pre-charged with hydrofluorocarbons (HFCs) |
| 8418.50.19.90 | Other |
| 8418.50.90.00 | Other refrigerating furniture |
| 8418.50.90.10 | Pre-charged with hydrofluorocarbons (HFCs) |
| 8418.50.90.90 | Other |
| - | Other refrigerating or freezing equipment; heat pumps |
| 8418.61.00 | Heat pumps other than air conditioning machines of heading 8415 |
| 8418.61.00.10 | For use in civil aircraft |
| 8418.61.00.11 | Other |
| 8418.61.00.91 | Pre-charged with hydrofluorocarbons (HFCs) |
| 8418.61.00.99 | Other |
| 8418.69.00 | Other |
| 8418.69.00.10 | For use in civil aircraft |
| 8418.69.00.11 | Other |
| 8418.69.00.91 | Pre-charged with hydrofluorocarbons (HFCs) |
| 8418.69.00.99 | Other |
| - | Parts |
| 8418.91.00 | Furniture designed to receive refrigerating or freezing equipment |
| 8418.99.00 | Other |
| 8418.99.10.00 | Evaporators and condensers, excluding those for refrigerators of the household type |
| 8418.99.10.10 | For use in certain types of aircraft |
| - | Other |
| 8418.99.10.81 | Pre-charged with hydrofluorocarbons (HFCs) |
| 8418.99.10.87 | Other |
| 8418.99.90.00 | Other |
| 8418.99.90.10 | Of refrigerating equipment adapted to the air-conditioning system, for use in certain types of aircraft |
| 8418.99.90.20 | Aluminium connecting block for connecting to a condenser manifold in welding process:, , -hardened to T6 or T5 temper,, , -with a weight of not more than 150 g,, , -with a length of 20 mm or more but not more than 150 mm,, , -with a fixing rail in one piece |
| 8418.99.90.30 | Receiver dryer profile for connecting to a condenser manifold in welding process with:, , -a braze flatness of not more than 0,2 mm,, , -a weight of 100 g or more but not more than 600 g,, , -a fixing rail in one piece |
| - | Other |
| 8418.99.90.91 | Pre-charged with hydrofluorocarbons (HFCs) |
| 8418.99.90.99 | Other |
| 8419 | Machinery, plant or laboratory equipment, whether or not electrically heated (excluding furnaces, ovens and other equipment of heading 8514), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilising, pasteurising, steaming, drying, evaporating, vaporising, condensing or cooling, other than machinery or plant of a kind used for domestic purposes; instantaneous or storage water heaters, non-electric |
| - | Instantaneous or storage water heaters, non-electric |
| 8419.11.00 | Instantaneous gas water heaters |
| 8419.12.00 | Solar water heaters |
| 8419.19.00 | Other |
| 8419.20.00 | Medical, surgical or laboratory sterilisers |
| - | Dryers |
| 8419.33.00 | Lyophilisation apparatus, freeze drying units and spray dryers |
| 8419.34.00 | Other, for agricultural products |
| 8419.35.00 | Other, for wood, paper pulp, paper or paperboard |
| 8419.39.00 | Other |
| 8419.40.00 | Distilling or rectifying plant |
| 8419.50.00 | Heat-exchange units |
| 8419.50.20.00 | Heat exchange units made of fluoropolymers and with inlet and outlet tube bores with inside diameters measuring 3 cm or less |
| 8419.50.80.00 | Other |
| 8419.50.80.10 | For use in civil aircraft |
| 8419.50.80.90 | Other |
| 8419.60.00 | Machinery for liquefying air or other gases |
| - | Other machinery, plant and equipment |
| 8419.81.00 | For making hot drinks or for cooking or heating food |
| 8419.81.20.00 | Percolators and other appliances for making coffee and other hot drinks |
| 8419.81.20.10 | For use in civil aircraft |
| 8419.81.20.90 | Other |
| 8419.81.80.00 | Other |
| 8419.81.80.10 | For use in civil aircraft |
| 8419.81.80.90 | Other |
| 8419.89.00 | Other |
| 8419.89.10.00 | Cooling towers and similar plant for direct cooling (without a separating wall) by means of recirculated water |
| 8419.89.30.00 | Vacuum-vapour plant for the deposition of metal |
| 8419.89.98.00 | Other |
| 8419.90.00 | Parts |
| 8419.90.15.00 | Of sterilisers of subheading 8419 20 00 |
| 8419.90.85.00 | Other |
| 8419.90.85.10 | Of heat exchange units, for use in civil aircraft |
| 8419.90.85.40 | Silicone or plastic keyboards, comprising:, , -parts of common metal, and, , -whether or not comprising parts of plastic,, , -epoxy resin reinforced with fiberglass or wood,, , -whether or not printed or surface-treated,, , -with or without electrical conductors, , -with or without a membrane bonded to the keyboard,, , -with or without mono or multilayer protective film |
| 8419.90.85.90 | Other |
| 8420 | Calendering or other rolling machines, other than for metals or glass, and cylinders therefor |
| 8420.10.00 | Calendering or other rolling machines |
| 8420.10.10.00 | Of a kind used in the textile industry |
| 8420.10.30.00 | Of a kind used in the paper industry |
| - | Other |
| 8420.10.81.00 | Roll laminators of a kind used solely or principally for the manufacture of printed circuit substrates or printed circuits |
| 8420.10.89.00 | Other |
| - | Parts |
| 8420.91.00 | Cylinders |
| 8420.91.10.00 | Of cast iron |
| 8420.91.80.00 | Other |
| 8420.99.00 | Other |
| 8421 | Centrifuges, including centrifugal dryers; filtering or purifying machinery and apparatus, for liquids or gases |
| - | Centrifuges, including centrifugal dryers |
| 8421.11.00 | Cream separators |
| 8421.12.00 | Clothes dryers |
| 8421.19.00 | Other |
| 8421.19.20.00 | Centrifuges of a kind used in laboratories |
| 8421.19.70.00 | Other |
| - | Filtering or purifying machinery and apparatus for liquids |
| 8421.21.00 | For filtering or purifying water |
| 8421.21.00.10 | For use in civil aircraft |
| 8421.21.00.20 | Water pre-treatment system comprising one or more of the following elements, whether or not incorporating modules for sterilization and sanitization of these elements:, , - ultrafiltration system, , - carbon filtration system, , - water softener system, for use in a biopharmaceutical laboratory |
| 8421.21.00.90 | Other |
| 8421.22.00 | For filtering or purifying beverages other than water |
| 8421.23.00 | Oil or petrol filters for internal combustion engines |
| 8421.23.00.10 | For use in civil aircraft |
| 8421.23.00.90 | Other |
| 8421.29.00 | Other |
| 8421.29.20.00 | Made of fluoropolymers and with filter or purifier membrane thickness not exceeding 140 microns |
| 8421.29.80.00 | Other |
| 8421.29.80.10 | For use in civil aircraft |
| 8421.29.80.90 | Other |
| - | Filtering or purifying machinery and apparatus for gases |
| 8421.31.00 | Intake air filters for internal combustion engines |
| 8421.31.00.10 | For use in civil aircraft |
| 8421.31.00.90 | Other |
| 8421.32.00 | Catalytic converters or particulate filters, whether or not combined, for purifying or filtering exhaust gases from internal combustion engines |
| 8421.39.00 | Other |
| 8421.39.15.00 | With stainless steel housing, and with inlet and outlet tube bores with inside diameters not exceeding 1,3 cm |
| - | Other |
| 8421.39.25.00 | Machinery and apparatus for filtering or purifying air |
| 8421.39.25.10 | For use in civil aircraft |
| 8421.39.25.90 | Other |
| - | Machinery and apparatus for filtering or purifying other gases |
| 8421.39.35.00 | By a catalytic process |
| 8421.39.35.10 | For use in civil aircraft |
| 8421.39.35.90 | Other |
| 8421.39.85.00 | Other |
| 8421.39.85.10 | For use in civil aircraft |
| 8421.39.85.90 | Other |
| - | Parts |
| 8421.91.00 | Of centrifuges, including centrifugal dryers |
| 8421.99.00 | Other |
| 8421.99.10.00 | Parts of machinery and apparatus of subheadings 8421 29 20 or 8421 39 15 |
| 8421.99.90.00 | Other |
| 8421.99.90.10 | Of filtering or purification machinery and apparatus for liquids or gases, for use in certain types of aircrafts |
| 8421.99.90.91 | Parts of equipment, for the purification of water by reverse osmosis, consisting of a bundle of hollow fibres of artificial plastic material with permeable walls, embedded in a block of artificial plastic material at one end and passing through a block of artificial plastic material at the other end, whether or not housed in a cylinder |
| 8421.99.90.92 | Parts of equipment for the purification of water by reverse osmosis, consisting essentially of plastic-based membranes, supported internally by woven or non-woven textile materials which are wound round a perforated tube, and enclosed in a cylindrical plastic casing of a wall-thickness of not more than 4 mm, whether or not housed in a cylinder of a wall-thickness of 5 mm or more |
| 8421.99.90.99 | Other |
| 8422 | Dishwashing machines; machinery for cleaning or drying bottles or other containers; machinery for filling, closing, sealing or labelling bottles, cans, boxes, bags or other containers; machinery for capsuling bottles, jars, tubes and similar containers; other packing or wrapping machinery (including heat-shrink wrapping machinery); machinery for aerating beverages |
| - | Dishwashing machines |
| 8422.11.00 | Of the household type |
| 8422.19.00 | Other |
| 8422.20.00 | Machinery for cleaning or drying bottles or other containers |
| 8422.30.00 | Machinery for filling, closing, sealing or labelling bottles, cans, boxes, bags or other containers; machinery for capsuling bottles, jars, tubes and similar containers; machinery for aerating beverages |
| 8422.40.00 | Other packing or wrapping machinery (including heat-shrink wrapping machinery) |
| 8422.90.00 | Parts |
| 8422.90.10.00 | Of dishwashing machines |
| 8422.90.90.00 | Other |
| 8423 | Weighing machinery (excluding balances of a sensitivity of 5 cg or better), including weight-operated counting or checking machines; weighing machine weights of all kinds |
| 8423.10.00 | Personal weighing machines, including baby scales; household scales |
| 8423.10.10.00 | Household scales |
| 8423.10.90.00 | Other |
| 8423.20.00 | Scales for continuous weighing of goods on conveyors |
| 8423.20.10.00 | Using electronic means for gauging weight |
| 8423.20.90.00 | Other |
| 8423.30.00 | Constant weight scales and scales for discharging a predetermined weight of material into a bag or container, including hopper scales |
| 8423.30.10.00 | Using electronic means for gauging weight |
| 8423.30.90.00 | Other |
| - | Other weighing machinery |
| 8423.81.00 | Having a maximum weighing capacity not exceeding 30 kg |
| - | Using electronic means for gauging weight |
| 8423.81.21.00 | Check weighers and automatic control machines operating by reference to a pre-determined weight |
| 8423.81.23.00 | Machinery for weighing and labelling pre-packaged goods |
| 8423.81.25.00 | Shop scales |
| 8423.81.29.00 | Other |
| 8423.81.80.00 | Other |
| 8423.82.00 | Having a maximum weighing capacity exceeding 30 kg but not exceeding 5 000 kg |
| 8423.82.20.00 | Using electronic means for gauging weight, excluding machines for weighing motor vehicles |
| - | Other |
| 8423.82.81.00 | Check weighers and automatic control machines operating by reference to a pre-determined weight |
| 8423.82.89.00 | Other |
| 8423.89.00 | Other |
| 8423.89.20.00 | Using electronic means for gauging weight |
| 8423.89.80.00 | Other |
| 8423.90.00 | Weighing machine weights of all kinds; parts of weighing machinery |
| 8423.90.10.00 | Parts of weighing machinery of subheadings 8423 20 10, 8423 30 10, 8423 81 21, 8423 81 23, 8423 81 25, 8423 81 29, 8423 82 20 or 8423 89 20 |
| 8423.90.90.00 | Other |
| 8424 | Mechanical appliances (whether or not hand-operated) for projecting, dispersing or spraying liquids or powders; fire extinguishers, whether or not charged; spray guns and similar appliances; steam or sandblasting machines and similar jet projecting machines |
| 8424.10.00 | Fire extinguishers, whether or not charged |
| 8424.10.00.10 | For use in civil aircraft |
| 8424.10.00.90 | Other |
| 8424.20.00 | Spray guns and similar appliances |
| 8424.30.00 | Steam or sandblasting machines and similar jet projecting machines |
| - | Water cleaning appliances, with built-in motor |
| 8424.30.01.00 | With heating device |
| 8424.30.08.00 | Other |
| - | Other machines |
| 8424.30.10.00 | Compressed air operated |
| 8424.30.90.00 | Other |
| - | Agricultural or horticultural sprayers |
| 8424.41.00 | Portable sprayers |
| 8424.49.00 | Other |
| 8424.49.10.00 | Sprayers and powder distributors designed to be mounted on or drawn by tractors |
| 8424.49.90.00 | Other |
| - | Other appliances |
| 8424.82.00 | Agricultural or horticultural |
| 8424.82.10.00 | Watering appliances |
| 8424.82.90.00 | Other |
| 8424.89.00 | Other |
| 8424.89.40.00 | Mechanical appliances for projecting, dispersing, or spraying of a kind used solely or principally for the manufacture of printed circuits or printed circuit assemblies |
| 8424.89.70.00 | Other |
| 8424.90.00 | Parts |
| 8424.90.20.00 | Parts of mechanical appliances of subheading 8424 89 40 |
| 8424.90.80.00 | Other |
| 8424.90.80.20 | Of fire extinguishers, for use in certain types of aircraft |
| 8424.90.80.80 | Other |
| 8425 | Pulley tackle and hoists other than skip hoists; winches and capstans; jacks |
| - | Pulley tackle and hoists other than skip hoists or hoists of a kind used for raising vehicles |
| 8425.11.00 | Powered by electric motor |
| 8425.19.00 | Other |
| - | Winches; capstans |
| 8425.31.00 | Powered by electric motor |
| 8425.39.00 | Other |
| - | Jacks; hoists of a kind used for raising vehicles |
| 8425.41.00 | Built-in jacking systems of a type used in garages |
| 8425.42.00 | Other jacks and hoists, hydraulic |
| 8425.49.00 | Other |
| 8426 | Ships' derricks; cranes, including cable cranes; mobile lifting frames, straddle carriers and works trucks fitted with a crane |
| - | Overhead travelling cranes, transporter cranes, gantry cranes, bridge cranes, mobile lifting frames and straddle carriers |
| 8426.11.00 | Overhead travelling cranes on fixed support |
| 8426.12.00 | Mobile lifting frames on tyres and straddle carriers |
| 8426.19.00 | Other |
| 8426.20.00 | Tower cranes |
| 8426.30.00 | Portal or pedestal jib cranes |
| - | Other machinery, self-propelled |
| 8426.41.00 | On tyres |
| 8426.49.00 | Other |
| - | Other machinery |
| 8426.91.00 | Designed for mounting on road vehicles |
| 8426.91.10.00 | Hydraulic cranes designed for the loading and unloading of the vehicle |
| 8426.91.90.00 | Other |
| 8426.99.00 | Other |
| 8427 | Fork-lift trucks; other works trucks fitted with lifting or handling equipment |
| 8427.10.00 | Self-propelled trucks powered by an electric motor |
| 8427.10.10.00 | With a lifting height of 1 m or more |
| 8427.10.10.10 | Mobile access equipment designed for the lifting of persons, with a maximum working height of 6 meters or more |
| 8427.10.10.90 | Other |
| 8427.10.90.00 | Other |
| 8427.20.00 | Other self-propelled trucks |
| - | With a lifting height of 1 m or more |
| 8427.20.11.00 | Rough terrain fork-lift and other stacking trucks |
| 8427.20.19.00 | Other |
| 8427.20.19.10 | Mobile access equipment designed for the lifting of persons, with a maximum working height of 6 meters or more |
| 8427.20.19.90 | Other |
| 8427.20.90.00 | Other |
| 8427.90.00 | Other trucks |
| - | Hand pallet trucks |
| 8427.90.00.11 | Consigned from Thailand |
| 8427.90.00.19 | Other |
| 8427.90.00.30 | Hand pallet trucks with a so-called “weight indication system” consisting of a weighing mechanism not integrated in the chassis, that is to say not integrated in the forks |
| 8427.90.00.80 | Other |
| 8428 | Other lifting, handling, loading or unloading machinery (for example, lifts, escalators, conveyors, teleferics) |
| 8428.10.00 | Lifts and skip hoists |
| 8428.10.20.00 | Electrically operated |
| 8428.10.80.00 | Other |
| 8428.20.00 | Pneumatic elevators and conveyors |
| 8428.20.20.00 | For bulk materials |
| 8428.20.80.00 | Other |
| - | Other continuous-action elevators and conveyors, for goods or materials |
| 8428.31.00 | Specially designed for underground use |
| 8428.32.00 | Other, bucket type |
| 8428.33.00 | Other, belt type |
| 8428.39.00 | Other |
| 8428.39.20.00 | Roller conveyors |
| 8428.39.90.00 | Other |
| 8428.40.00 | Escalators and moving walkways |
| 8428.60.00 | Teleferics, chairlifts, ski-draglines; traction mechanisms for funiculars |
| 8428.70.00 | Industrial robots |
| 8428.90.00 | Other machinery |
| - | Loaders specially designed for use in agriculture |
| 8428.90.71.00 | Designed for attachment to agricultural tractors |
| 8428.90.79.00 | Other |
| 8428.90.90.00 | Other |
| 8428.90.90.20 | Mobile access equipment designed for the lifting of persons, self-propelled, with a maximum working height of 6 meters or more |
| 8428.90.90.80 | Other |
| 8429 | Self-propelled bulldozers, angledozers, graders, levellers, scrapers, mechanical shovels, excavators, shovel loaders, tamping machines and roadrollers |
| - | Bulldozers and angledozers |
| 8429.11.00 | Track laying |
| 8429.19.00 | Other |
| 8429.20.00 | Graders and levellers |
| 8429.30.00 | Scrapers |
| 8429.40.00 | Tamping machines and roadrollers |
| - | Roadrollers |
| 8429.40.10.00 | Vibratory |
| 8429.40.30.00 | Other |
| 8429.40.90.00 | Tamping machines |
| - | Mechanical shovels, excavators and shovel loaders |
| 8429.51.00 | Front-end shovel loaders |
| 8429.51.10.00 | Loaders specially designed for underground use |
| - | Other |
| 8429.51.91.00 | Crawler shovel loaders |
| 8429.51.99.00 | Other |
| 8429.52.00 | Machinery with a 360° revolving superstructure |
| 8429.52.10.00 | Track-laying excavators |
| 8429.52.90.00 | Other |
| 8429.59.00 | Other |
| 8430 | Other moving, grading, levelling, scraping, excavating, tamping, compacting, extracting or boring machinery, for earth, minerals or ores; piledrivers and pile extractors; snowploughs and snowblowers |
| 8430.10.00 | Piledrivers and pile extractors |
| 8430.20.00 | Snowploughs and snowblowers |
| - | Coal or rock cutters and tunnelling machinery |
| 8430.31.00 | Self-propelled |
| 8430.39.00 | Other |
| - | Other boring or sinking machinery |
| 8430.41.00 | Self-propelled |
| 8430.49.00 | Other |
| 8430.50.00 | Other machinery, self-propelled |
| - | Other machinery, not self-propelled |
| 8430.61.00 | Tamping or compacting machinery |
| 8430.69.00 | Other |
| 8431 | Parts suitable for use solely or principally with the machinery of headings 8425 to 8430 |
| 8431.10.00 | Of machinery of heading 8425 |
| 8431.20.00 | Of machinery of heading 8427 |
| - | Chassis and hydraulics for hand pallet trucks |
| 8431.20.00.11 | Consigned from Thailand |
| 8431.20.00.19 | Other |
| 8431.20.00.40 | Aluminium core, plastic tank radiator, with integral steel support structure and an open core square wave design of 9 fins per 2,54 cm of core length for use in the manufacture of vehicles of heading 8427 |
| 8431.20.00.50 | Chassis and hydraulics, with a so-called ‘weight indication system’ consisting of a weighing mechanism not integrated in the chassis, that is to say not integrated in the forks |
| 8431.20.00.60 | Pre-assembled or ready-to-assemble sections of self-propelled mobile access equipment designed for the lifting of persons, excluding individual components when presented separately |
| 8431.20.00.80 | Other |
| - | Of machinery of heading 8428 |
| 8431.31.00 | Of lifts, skip hoists or escalators |
| 8431.39.00 | Other |
| 8431.39.00.10 | Pre-assembled or ready-to-assemble sections of self-propelled mobile access equipment designed for the lifting of persons, excluding individual components when presented separately |
| 8431.39.00.90 | Other |
| - | Of machinery of heading 8426, 8429 or 8430 |
| 8431.41.00 | Buckets, shovels, grabs and grips |
| 8431.42.00 | Bulldozer or angledozer blades |
| 8431.43.00 | Parts for boring or sinking machinery of subheading 8430 41 or 8430 49 |
| 8431.49.00 | Other |
| 8431.49.20.00 | Of cast iron or cast steel |
| 8431.49.80.00 | Other |
| 8432 | Agricultural, horticultural or forestry machinery for soil preparation or cultivation; lawn or sports-ground rollers |
| 8432.10.00 | Ploughs |
| - | Harrows, scarifiers, cultivators, weeders and hoes |
| 8432.21.00 | Disc harrows |
| 8432.29.00 | Other |
| 8432.29.10.00 | Scarifiers and cultivators |
| 8432.29.30.00 | Harrows |
| 8432.29.50.00 | Rotovators |
| 8432.29.90.00 | Other |
| - | Seeders, planters and transplanters |
| 8432.31.00 | No-till direct seeders, planters and transplanters |
| 8432.39.00 | Other |
| - | Seeders |
| 8432.39.11.00 | Central driven precision spacing seeders |
| 8432.39.19.00 | Other |
| 8432.39.90.00 | Planters and transplanters |
| - | Manure spreaders and fertiliser distributors |
| 8432.41.00 | Manure spreaders |
| 8432.42.00 | Fertiliser distributors |
| 8432.80.00 | Other machinery |
| 8432.90.00 | Parts |
| 8433 | Harvesting or threshing machinery, including straw or fodder balers; grass or hay mowers; machines for cleaning, sorting or grading eggs, fruit or other agricultural produce, other than machinery of heading 8437 |
| - | Mowers for lawns, parks or sports grounds |
| 8433.11.00 | Powered, with the cutting device rotating in a horizontal plane |
| 8433.11.10.00 | Electric |
| - | Other |
| - | Self-propelled |
| 8433.11.51.00 | With a seat |
| 8433.11.59.00 | Other |
| 8433.11.90.00 | Other |
| 8433.19.00 | Other |
| - | With motor |
| 8433.19.10.00 | Electric |
| - | Other |
| - | Self-propelled |
| 8433.19.51.00 | With a seat |
| 8433.19.59.00 | Other |
| 8433.19.70.00 | Other |
| 8433.19.90.00 | Without motor |
| 8433.20.00 | Other mowers, including cutter bars for tractor mounting |
| 8433.20.10.00 | With motor |
| - | Other |
| 8433.20.50.00 | Designed to be carried on or hauled by a tractor |
| 8433.20.90.00 | Other |
| 8433.30.00 | Other haymaking machinery |
| 8433.40.00 | Straw or fodder balers, including pick-up balers |
| - | Other harvesting machinery; threshing machinery |
| 8433.51.00 | Combine harvester-threshers |
| 8433.52.00 | Other threshing machinery |
| 8433.53.00 | Root or tuber harvesting machines |
| 8433.53.10.00 | Potato diggers and potato harvesters |
| 8433.53.30.00 | Beet-topping machines and beet harvesters |
| 8433.53.90.00 | Other |
| 8433.59.00 | Other |
| - | Forage harvesters |
| 8433.59.11.00 | Self-propelled |
| 8433.59.19.00 | Other |
| 8433.59.85.00 | Other |
| 8433.60.00 | Machines for cleaning, sorting or grading eggs, fruit or other agricultural produce |
| 8433.90.00 | Parts |
| 8434 | Milking machines and dairy machinery |
| 8434.10.00 | Milking machines |
| 8434.20.00 | Dairy machinery |
| 8434.90.00 | Parts |
| 8435 | Presses, crushers and similar machinery used in the manufacture of wine, cider, fruit juices or similar beverages |
| 8435.10.00 | Machinery |
| 8435.90.00 | Parts |
| 8436 | Other agricultural, horticultural, forestry, poultry-keeping or bee-keeping machinery, including germination plant fitted with mechanical or thermal equipment; poultry incubators and brooders |
| 8436.10.00 | Machinery for preparing animal feedingstuffs |
| - | Poultry-keeping machinery; poultry incubators and brooders |
| 8436.21.00 | Poultry incubators and brooders |
| 8436.29.00 | Other |
| 8436.80.00 | Other machinery |
| 8436.80.10.00 | Forestry machinery |
| 8436.80.90.00 | Other |
| - | Parts |
| 8436.91.00 | Of poultry-keeping machinery or poultry incubators and brooders |
| 8436.99.00 | Other |
| 8436.99.00.10 | Part containing:, , - a single-phase AC motor,, , - an epicyclic gearing,, , - a cutter blade, and whether or not containing:, , - a capacitor,, , - a part fitted with a threaded bolt, for use in the manufacture of garden shredders |
| 8436.99.00.90 | Other |
| 8437 | Machines for cleaning, sorting or grading seed, grain or dried leguminous vegetables; machinery used in the milling industry or for the working of cereals or dried leguminous vegetables, other than farm-type machinery |
| 8437.10.00 | Machines for cleaning, sorting or grading seed, grain or dried leguminous vegetables |
| 8437.80.00 | Other machinery |
| 8437.90.00 | Parts |
| 8438 | Machinery, not specified or included elsewhere in this chapter, for the industrial preparation or manufacture of food or drink, other than machinery for the extraction or preparation of animal or fixed vegetable or microbial fats or oils |
| 8438.10.00 | Bakery machinery and machinery for the manufacture of macaroni, spaghetti or similar products |
| 8438.10.10.00 | Bakery machinery |
| 8438.10.90.00 | Machinery for the manufacture of macaroni, spaghetti or similar products |
| 8438.20.00 | Machinery for the manufacture of confectionery, cocoa or chocolate |
| 8438.30.00 | Machinery for sugar manufacture |
| 8438.40.00 | Brewery machinery |
| 8438.50.00 | Machinery for the preparation of meat or poultry |
| 8438.60.00 | Machinery for the preparation of fruits, nuts or vegetables |
| 8438.80.00 | Other machinery |
| 8438.80.10.00 | For the preparation of tea or coffee |
| - | Other |
| 8438.80.91.00 | For the preparation or manufacture of drink |
| 8438.80.99.00 | Other |
| 8438.90.00 | Parts |
| 8439 | Machinery for making pulp of fibrous cellulosic material or for making or finishing paper or paperboard |
| 8439.10.00 | Machinery for making pulp of fibrous cellulosic material |
| 8439.20.00 | Machinery for making paper or paperboard |
| 8439.30.00 | Machinery for finishing paper or paperboard |
| - | Parts |
| 8439.91.00 | Of machinery for making pulp of fibrous cellulosic material |
| 8439.99.00 | Other |
| 8439.99.00.10 | Suction-roll shells, produced by centrifugal casting, not drilled, in the form of alloy-steel tubes, of a length of 3 000 mm or more and an external diameter of 550 mm or more |
| 8439.99.00.90 | Other |
| 8440 | Bookbinding machinery, including book-sewing machines |
| 8440.10.00 | Machinery |
| 8440.10.10.00 | Folding machines |
| 8440.10.20.00 | Collating machines and gathering machines |
| 8440.10.30.00 | Sewing, wire stitching and stapling machines |
| 8440.10.40.00 | Unsewn (perfect) binding machines |
| 8440.10.90.00 | Other |
| 8440.90.00 | Parts |
| 8441 | Other machinery for making up paper pulp, paper or paperboard, including cutting machines of all kinds |
| 8441.10.00 | Cutting machines |
| 8441.10.10.00 | Combined reel slitting and re-reeling machines |
| 8441.10.20.00 | Other slitting and cross-cutting machines |
| 8441.10.30.00 | Guillotines |
| 8441.10.70.00 | Other |
| 8441.20.00 | Machines for making bags, sacks or envelopes |
| 8441.30.00 | Machines for making cartons, boxes, cases, tubes, drums or similar containers, other than by moulding |
| 8441.40.00 | Machines for moulding articles in paper pulp, paper or paperboard |
| 8441.80.00 | Other machinery |
| 8441.90.00 | Parts |
| 8441.90.10.00 | Of cutting machines |
| 8441.90.90.00 | Other |
| 8442 | Machinery, apparatus and equipment (other than the machines of headings 8456 to 8465) for preparing or making plates, cylinders or other printing components; plates, cylinders and other printing components; plates, cylinders and lithographic stones, prepared for printing purposes (for example, planed, grained or polished) |
| 8442.30.00 | Machinery, apparatus and equipment |
| 8442.40.00 | Parts of the foregoing machinery, apparatus or equipment |
| 8442.50.00 | Plates, cylinders and other printing components; plates, cylinders and lithographic stones, prepared for printing purposes (for example, planed, grained or polished) |
| 8443 | Printing machinery used for printing by means of plates, cylinders and other printing components of heading 8442; other printers, copying machines and facsimile machines, whether or not combined; parts and accessories thereof |
| - | Printing machinery used for printing by means of plates, cylinders and other printing components of heading 8442 |
| 8443.11.00 | Offset printing machinery, reel fed |
| 8443.12.00 | Offset printing machinery, sheet fed, office type (using sheets with one side not exceeding 22 cm and the other side not exceeding 36 cm in the unfolded state) |
| 8443.13.00 | Other offset printing machinery |
| - | Sheet fed |
| 8443.13.10.00 | Used |
| - | New, taking sheets of a size |
| 8443.13.32.00 | Not exceeding 53 !x! 75 cm |
| 8443.13.34.00 | Exceeding 53 !x! 75 cm but not exceeding 75 !x! 107 cm |
| 8443.13.38.00 | Exceeding 75 !x! 107 cm |
| 8443.13.90.00 | Other |
| 8443.14.00 | Letterpress printing machinery, reel fed, excluding flexographic printing |
| 8443.15.00 | Letterpress printing machinery, other than reel fed, excluding flexographic printing |
| 8443.16.00 | Flexographic printing machinery |
| 8443.17.00 | Gravure printing machinery |
| 8443.19.00 | Other |
| 8443.19.20.00 | For printing textile materials |
| 8443.19.40.00 | For use in the production of semiconductors |
| 8443.19.70.00 | Other |
| - | Other printers, copying machines and facsimile machines, whether or not combined |
| 8443.31.00 | Machines which perform two or more of the functions of printing, copying or facsimile transmission, capable of connecting to an automatic data-processing machine or to a network |
| 8443.32.00 | Other, capable of connecting to an automatic data-processing machine or to a network |
| 8443.32.10.00 | Printers |
| 8443.32.80.00 | Other |
| 8443.39.00 | Other |
| - | Parts and accessories |
| 8443.91.00 | Parts and accessories of printing machinery used for printing by means of plates, cylinders and other printing components of heading 8442 |
| 8443.91.10.00 | Of apparatus of subheading 8443 19 40 |
| - | Other |
| 8443.91.91.00 | Of cast iron or cast steel |
| 8443.91.99.00 | Other |
| 8443.99.00 | Other |
| 8443.99.10.00 | Electronic assemblies |
| 8443.99.90.00 | Other |
| 8444 | Machines for extruding, drawing, texturing or cutting man-made textile materials |
| 8444.00.10.00 | Machines for extruding |
| 8444.00.90.00 | Other |
| 8445 | Machines for preparing textile fibres; spinning, doubling or twisting machines and other machinery for producing textile yarns; textile reeling or winding (including weft-winding) machines and machines for preparing textile yarns for use on the machines of heading 8446 or 8447 |
| - | Machines for preparing textile fibres |
| 8445.11.00 | Carding machines |
| 8445.12.00 | Combing machines |
| 8445.13.00 | Drawing or roving machines |
| 8445.19.00 | Other |
| 8445.20.00 | Textile spinning machines |
| 8445.30.00 | Textile doubling or twisting machines |
| 8445.40.00 | Textile winding (including weft-winding) or reeling machines |
| 8445.90.00 | Other |
| 8446 | Weaving machines (looms) |
| 8446.10.00 | For weaving fabrics of a width not exceeding 30 cm |
| - | For weaving fabrics of a width exceeding 30 cm, shuttle type |
| 8446.21.00 | Power looms |
| 8446.29.00 | Other |
| 8446.30.00 | For weaving fabrics of a width exceeding 30 cm, shuttleless type |
| 8447 | Knitting machines, stitch-bonding machines and machines for making gimped yarn, tulle, lace, embroidery, trimmings, braid or net and machines for tufting |
| - | Circular knitting machines |
| 8447.11.00 | With cylinder diameter not exceeding 165 mm |
| 8447.12.00 | With cylinder diameter exceeding 165 mm |
| 8447.20.00 | Flat knitting machines; stitch-bonding machines |
| 8447.20.20.00 | Warp knitting machines (including Raschel type); stitch-bonding machines |
| 8447.20.80.00 | Other |
| 8447.90.00 | Other |
| 8448 | Auxiliary machinery for use with machines of heading 8444, 8445, 8446 or 8447 (for example, dobbies, jacquards, automatic stop motions, shuttle changing mechanisms); parts and accessories suitable for use solely or principally with the machines of this heading or of heading 8444, 8445, 8446 or 8447 (for example, spindles and spindle flyers, card clothing, combs, extruding nipples, shuttles, healds and heald-frames, hosiery needles) |
| - | Auxiliary machinery for machines of heading 8444, 8445, 8446 or 8447 |
| 8448.11.00 | Dobbies and jacquards; card-reducing, copying, punching or assembling machines for use therewith |
| 8448.19.00 | Other |
| 8448.20.00 | Parts and accessories of machines of heading 8444 or of their auxiliary machinery |
| - | Parts and accessories of machines of heading 8445 or of their auxiliary machinery |
| 8448.31.00 | Card clothing |
| 8448.32.00 | Of machines for preparing textile fibres, other than card clothing |
| 8448.33.00 | Spindles, spindle flyers, spinning rings and ring travellers |
| 8448.39.00 | Other |
| - | Parts and accessories of weaving machines (looms) or of their auxiliary machinery |
| 8448.42.00 | Reeds for looms, healds and heald-frames |
| 8448.49.00 | Other |
| - | Parts and accessories of machines of heading 8447 or of their auxiliary machinery |
| 8448.51.00 | Sinkers, needles and other articles used in forming stitches |
| 8448.51.10.00 | Sinkers |
| 8448.51.90.00 | Other |
| 8448.59.00 | Other |
| 8449.00 | Machinery for the manufacture or finishing of felt or nonwovens in the piece or in shapes, including machinery for making felt hats; blocks for making hats |
| 8450 | Household or laundry-type washing machines, including machines which both wash and dry |
| - | Machines, each of a dry linen capacity not exceeding 10 kg |
| 8450.11.00 | Fully-automatic machines |
| - | Each of a dry linen capacity not exceeding 6 kg |
| 8450.11.11.00 | Front-loading machines |
| 8450.11.19.00 | Top-loading machines |
| 8450.11.90.00 | Each of a dry linen capacity exceeding 6 kg but not exceeding 10 kg |
| 8450.12.00 | Other machines, with built-in centrifugal drier |
| 8450.19.00 | Other |
| 8450.20.00 | Machines, each of a dry linen capacity exceeding 10 kg |
| 8450.90.00 | Parts |
| 8451 | Machinery (other than machines of heading 8450) for washing, cleaning, wringing, drying, ironing, pressing (including fusing presses), bleaching, dyeing, dressing, finishing, coating or impregnating textile yarns, fabrics or made-up textile articles and machines for applying the paste to the base fabric or other support used in the manufacture of floor coverings such as linoleum; machines for reeling, unreeling, folding, cutting or pinking textile fabrics |
| 8451.10.00 | Dry-cleaning machines |
| - | Drying machines |
| 8451.21.00 | Each of a dry linen capacity not exceeding 10 kg |
| 8451.29.00 | Other |
| 8451.30.00 | Ironing machines and presses (including fusing presses) |
| 8451.40.00 | Washing, bleaching or dyeing machines |
| 8451.50.00 | Machines for reeling, unreeling, folding, cutting or pinking textile fabrics |
| 8451.80.00 | Other machinery |
| 8451.80.10.00 | Machines used in the manufacture of linoleum or other floor coverings for applying the paste to the base fabric or other support |
| 8451.80.30.00 | Machines for dressing or finishing |
| 8451.80.80.00 | Other |
| 8451.90.00 | Parts |
| 8452 | Sewing machines, other than book-sewing machines of heading 8440; furniture, bases and covers specially designed for sewing machines; sewing machine needles |
| 8452.10.00 | Sewing machines of the household type |
| - | Sewing machines (lock-stitch only), with heads of a weight not exceeding 16 kg without motor or 17 kg including the motor; sewing machine heads (lock-stitch only), of a weight not exceeding 16 kg without motor or 17 kg including the motor |
| 8452.10.11.00 | Sewing machines having a value (not including frames, tables or furniture) of more than € 65 each |
| 8452.10.19.00 | Other |
| 8452.10.90.00 | Other sewing machines and other sewing machine heads |
| - | Other sewing machines |
| 8452.21.00 | Automatic units |
| 8452.29.00 | Other |
| 8452.30.00 | Sewing machine needles |
| 8452.90.00 | Furniture, bases and covers for sewing machines and parts thereof; other parts of sewing machines |
| 8453 | Machinery for preparing, tanning or working hides, skins or leather or for making or repairing footwear or other articles of hides, skins or leather, other than sewing machines |
| 8453.10.00 | Machinery for preparing, tanning or working hides, skins or leather |
| 8453.20.00 | Machinery for making or repairing footwear |
| 8453.80.00 | Other machinery |
| 8453.90.00 | Parts |
| 8454 | Converters, ladles, ingot moulds and casting machines, of a kind used in metallurgy or in metal foundries |
| 8454.10.00 | Converters |
| 8454.20.00 | Ingot moulds and ladles |
| 8454.30.00 | Casting machines |
| 8454.30.10.00 | For casting under pressure |
| 8454.30.90.00 | Other |
| 8454.90.00 | Parts |
| 8455 | Metal-rolling mills and rolls therefor |
| 8455.10.00 | Tube mills |
| - | Other rolling mills |
| 8455.21.00 | Hot or combination hot and cold |
| 8455.22.00 | Cold |
| 8455.30.00 | Rolls for rolling mills |
| 8455.30.10.00 | Of cast iron |
| - | Of open-die forged steel |
| 8455.30.31.00 | Hot-rolling work-rolls; hot-rolling and cold-rolling back-up rolls |
| 8455.30.39.00 | Cold-rolling work-rolls |
| 8455.30.90.00 | Other |
| 8455.90.00 | Other parts |
| 8456 | Machine tools for working any material by removal of material, by laser or other light or photon beam, ultrasonic, electrodischarge, electrochemical, electron beam, ionic-beam or plasma arc processes; water-jet cutting machines |
| - | Operated by laser or other light or photon beam processes |
| 8456.11.00 | Operated by laser |
| 8456.11.10.00 | Of a kind used solely or principally for the manufacture of printed circuits, printed circuit assemblies, parts of heading 8517, or parts of automatic data processing machines |
| 8456.11.90.00 | Other |
| 8456.12.00 | Operated by other light or photon beam processes |
| 8456.12.10.00 | Of a kind used solely or principally for the manufacture of printed circuits, printed circuit assemblies, parts of heading 8517, or parts of automatic data processing machines |
| 8456.12.90.00 | Other |
| 8456.20.00 | Operated by ultrasonic processes |
| 8456.30.00 | Operated by electrodischarge processes |
| - | Numerically controlled |
| 8456.30.11.00 | Wire-cut |
| 8456.30.19.00 | Other |
| 8456.30.90.00 | Other |
| 8456.40.00 | Operated by plasma arc processes |
| 8456.50.00 | Water-jet cutting machines |
| 8456.90.00 | Other |
| 8457 | Machining centres, unit construction machines (single station) and multi-station transfer machines, for working metal |
| 8457.10.00 | Machining centres |
| 8457.10.10.00 | Horizontal |
| 8457.10.90.00 | Other |
| 8457.20.00 | Unit construction machines (single station) |
| 8457.30.00 | Multi-station transfer machines |
| 8457.30.10.00 | Numerically controlled |
| 8457.30.90.00 | Other |
| 8458 | Lathes (including turning centres) for removing metal |
| - | Horizontal lathes |
| 8458.11.00 | Numerically controlled |
| 8458.11.20.00 | Turning centres |
| - | Automatic lathes |
| 8458.11.41.00 | Single spindle |
| 8458.11.49.00 | Multi-spindle |
| 8458.11.80.00 | Other |
| 8458.19.00 | Other |
| - | Other lathes |
| 8458.91.00 | Numerically controlled |
| 8458.91.20.00 | Turning centres |
| 8458.91.80.00 | Other |
| 8458.99.00 | Other |
| 8459 | Machine tools (including way-type unit head machines) for drilling, boring, milling, threading or tapping by removing metal, other than lathes (including turning centres) of heading 8458 |
| 8459.10.00 | Way-type unit head machines |
| - | Other drilling machines |
| 8459.21.00 | Numerically controlled |
| 8459.29.00 | Other |
| - | Other boring-milling machines |
| 8459.31.00 | Numerically controlled |
| 8459.39.00 | Other |
| - | Other boring machines |
| 8459.41.00 | Numerically controlled |
| 8459.49.00 | Other |
| - | Milling machines, knee-type |
| 8459.51.00 | Numerically controlled |
| 8459.59.00 | Other |
| - | Other milling machines |
| 8459.61.00 | Numerically controlled |
| 8459.61.10.00 | Tool milling machines |
| 8459.61.90.00 | Other |
| 8459.69.00 | Other |
| 8459.69.10.00 | Tool milling machines |
| 8459.69.90.00 | Other |
| 8459.70.00 | Other threading or tapping machines |
| 8460 | Machine tools for deburring, sharpening, grinding, honing, lapping, polishing or otherwise finishing metal or cermets by means of grinding stones, abrasives or polishing products, other than gear cutting, gear grinding or gear finishing machines of heading 8461 |
| - | Flat-surface grinding machines |
| 8460.12.00 | Numerically controlled |
| 8460.19.00 | Other |
| - | Other grinding machines |
| 8460.22.00 | Centreless grinding machines, numerically controlled |
| 8460.23.00 | Other cylindrical grinding machines, numerically controlled |
| 8460.24.00 | Other, numerically controlled |
| 8460.29.00 | Other |
| 8460.29.10.00 | For cylindrical surfaces |
| 8460.29.90.00 | Other |
| - | Sharpening (tool or cutter grinding) machines |
| 8460.31.00 | Numerically controlled |
| 8460.39.00 | Other |
| 8460.40.00 | Honing or lapping machines |
| 8460.40.10.00 | Numerically controlled |
| 8460.40.90.00 | Other |
| 8460.90.00 | Other |
| 8461 | Machine tools for planing, shaping, slotting, broaching, gear cutting, gear grinding or gear finishing, sawing, cutting-off and other machine tools working by removing metal or cermets, not elsewhere specified or included |
| 8461.20.00 | Shaping or slotting machines |
| 8461.30.00 | Broaching machines |
| 8461.30.10.00 | Numerically controlled |
| 8461.30.90.00 | Other |
| 8461.40.00 | Gear-cutting, gear-grinding or gear-finishing machines |
| - | Gear-cutting machines (including abrasive gear-cutting machines) |
| - | For cutting cylindrical gears |
| 8461.40.11.00 | Numerically controlled |
| 8461.40.19.00 | Other |
| - | For cutting other gears |
| 8461.40.31.00 | Numerically controlled |
| 8461.40.39.00 | Other |
| - | Gear-finishing machines |
| - | Fitted with a micrometric adjusting system, in which the positioning in any one axis can be set up to an accuracy of at least 0,01 mm |
| 8461.40.71.00 | Numerically controlled |
| 8461.40.79.00 | Other |
| 8461.40.90.00 | Other |
| 8461.50.00 | Sawing or cutting-off machines |
| - | Sawing machines |
| 8461.50.11.00 | Circular saws |
| 8461.50.19.00 | Other |
| 8461.50.90.00 | Cutting-off machines |
| 8461.90.00 | Other |
| 8462 | Machine tools (including presses) for working metal by forging, hammering or die forging (excluding rolling mills); machine tools (including presses, slitting lines and cut-to-length lines) for working metal by bending, folding, straightening, flattening, shearing, punching, notching or nibbling (excluding draw-benches); presses for working metal or metal carbides, not specified above |
| - | Hot forming machines for forging, die forging (including presses) and hot hammers |
| 8462.11.00 | Closed die forging machines |
| 8462.11.10.00 | Numerically controlled |
| 8462.11.90.00 | Other |
| 8462.19.00 | Other |
| 8462.19.10.00 | Numerically controlled |
| 8462.19.90.00 | Other |
| - | Bending, folding, straightening or flattening machines (including press brakes) for flat products |
| 8462.22.00 | Profile forming machines |
| 8462.22.10.00 | Numerically controlled |
| 8462.22.90.00 | Other |
| 8462.23.00 | Numerically controlled press brakes |
| 8462.24.00 | Numerically controlled panel benders |
| 8462.25.00 | Numerically controlled roll forming machines |
| 8462.26.00 | Other numerically controlled bending, folding, straightening or flattening machines |
| 8462.29.00 | Other |
| - | Slitting lines, cut-to-length lines and other shearing machines (excluding presses) for flat products, other than combined punching and shearing machines |
| 8462.32.00 | Slitting lines and cut-to-length lines |
| 8462.32.10.00 | Numerically controlled |
| 8462.32.90.00 | Other |
| 8462.33.00 | Numerically controlled shearing machines |
| 8462.39.00 | Other |
| - | Punching, notching or nibbling machines (excluding presses) for flat products including combined punching and shearing machines |
| 8462.42.00 | Numerically controlled |
| 8462.49.00 | Other |
| - | Machines for working tube, pipe, hollow section and bar (excluding presses) |
| 8462.51.00 | Numerically controlled |
| 8462.59.00 | Other |
| - | Cold metal working presses |
| 8462.61.00 | Hydraulic presses |
| 8462.61.10.00 | Numerically controlled |
| 8462.61.90.00 | Other |
| 8462.62.00 | Mechanical presses |
| 8462.62.10.00 | Numerically controlled |
| 8462.62.90.00 | Other |
| 8462.63.00 | Servo-presses |
| 8462.63.10.00 | Numerically controlled |
| 8462.63.90.00 | Other |
| 8462.69.00 | Other |
| 8462.69.10.00 | Numerically controlled |
| 8462.69.90.00 | Other |
| 8462.90.00 | Other |
| 8462.90.10.00 | Numerically controlled |
| 8462.90.90.00 | Other |
| 8463 | Other machine tools for working metal or cermets, without removing material |
| 8463.10.00 | Drawbenches for bars, tubes, profiles, wire or the like |
| 8463.10.10.00 | Drawbenches for wire |
| 8463.10.90.00 | Other |
| 8463.20.00 | Thread-rolling machines |
| 8463.30.00 | Machines for working wire |
| 8463.90.00 | Other |
| 8464 | Machine tools for working stone, ceramics, concrete, asbestos-cement or like mineral materials or for cold working glass |
| 8464.10.00 | Sawing machines |
| 8464.20.00 | Grinding or polishing machines |
| - | For working glass |
| 8464.20.11.00 | Optical glass |
| 8464.20.19.00 | Other |
| 8464.20.80.00 | Other |
| 8464.90.00 | Other |
| 8465 | Machine tools (including machines for nailing, stapling, glueing or otherwise assembling) for working wood, cork, bone, hard rubber, hard plastics or similar hard materials |
| 8465.10.00 | Machines which can carry out different types of machining operations without tool change between such operations |
| 8465.10.10.00 | With manual transfer of workpiece between each operation |
| 8465.10.90.00 | With automatic transfer of workpiece between each operation |
| 8465.20.00 | Machining centres |
| - | Other |
| 8465.91.00 | Sawing machines |
| 8465.91.10.00 | Bandsaws |
| 8465.91.20.00 | Circular saws |
| 8465.91.90.00 | Other |
| 8465.92.00 | Planing, milling or moulding (by cutting) machines |
| 8465.93.00 | Grinding, sanding or polishing machines |
| 8465.94.00 | Bending or assembling machines |
| 8465.95.00 | Drilling or morticing machines |
| 8465.96.00 | Splitting, slicing or paring machines |
| 8465.99.00 | Other |
| 8466 | Parts and accessories suitable for use solely or principally with the machines of headings 8456 to 8465, including work or tool holders, self-opening dieheads, dividing heads and other special attachments for the machines; tool holders for any type of tool for working in the hand |
| 8466.10.00 | Tool holders and self-opening dieheads |
| - | Tool holders |
| 8466.10.20.00 | Arbors, collets and sleeves |
| - | Other |
| 8466.10.31.00 | For lathes |
| 8466.10.38.00 | Other |
| 8466.10.80.00 | Self-opening dieheads |
| 8466.20.00 | Work holders |
| 8466.20.20.00 | Jigs and fixtures for specific applications; sets of standard jig and fixture components |
| - | Other |
| 8466.20.91.00 | For lathes |
| 8466.20.98.00 | Other |
| 8466.30.00 | Dividing heads and other special attachments for machines |
| - | Other |
| 8466.91.00 | For machines of heading 8464 |
| 8466.91.20.00 | Of cast iron or cast steel |
| 8466.91.95.00 | Other |
| 8466.92.00 | For machines of heading 8465 |
| 8466.92.20.00 | Of cast iron or cast steel |
| 8466.92.80.00 | Other |
| 8466.93.00 | For machines of headings 8456 to 8461 |
| 8466.93.40.00 | Parts and accessories of machines of subheadings 8456 11 10, 8456 12 10, 8456 20, 8456 30, 8457 10, 8458 91, 8459 21 00, 8459 61 or 8461 50 of a kind used solely or principally for the manufacture of printed circuits, printed circuit assemblies, parts of heading 8517, or parts of automatic data processing machines |
| - | Other |
| 8466.93.50.00 | For machines of subheading 8456 50 00 |
| 8466.93.60.00 | Other |
| 8466.94.00 | For machines of heading 8462 or 8463 |
| 8467 | Tools for working in the hand, pneumatic, hydraulic or with self-contained electric or non-electric motor |
| - | Pneumatic |
| 8467.11.00 | Rotary type (including combined rotary-percussion) |
| 8467.11.10.00 | Metalworking |
| 8467.11.90.00 | Other |
| 8467.19.00 | Other |
| - | With self-contained electric motor |
| 8467.21.00 | Drills of all kinds |
| 8467.21.10.00 | Capable of operation without an external source of power |
| - | Other |
| 8467.21.91.00 | Electropneumatic |
| 8467.21.99.00 | Other |
| 8467.22.00 | Saws |
| 8467.22.10.00 | Chainsaws |
| 8467.22.30.00 | Circular saws |
| 8467.22.90.00 | Other |
| 8467.29.00 | Other |
| 8467.29.20.00 | Capable of operation without an external source of power |
| - | Other |
| - | Grinders and sanders |
| 8467.29.51.00 | Angle grinders |
| 8467.29.53.00 | Belt sanders |
| 8467.29.59.00 | Other |
| 8467.29.70.00 | Planers |
| 8467.29.80.00 | Hedge trimmers and lawn edge cutters |
| 8467.29.85.00 | Other |
| - | Other tools |
| 8467.81.00 | Chainsaws |
| 8467.89.00 | Other |
| - | Parts |
| 8467.91.00 | Of chainsaws |
| 8467.92.00 | Of pneumatic tools |
| 8467.99.00 | Other |
| 8468 | Machinery and apparatus for soldering, brazing or welding, whether or not capable of cutting, other than those of heading 8515; gas-operated surface tempering machines and appliances |
| 8468.10.00 | Hand-held blow pipes |
| 8468.20.00 | Other gas-operated machinery and apparatus |
| 8468.80.00 | Other machinery and apparatus |
| 8468.90.00 | Parts |
| 8470 | Calculating machines and pocket-size data-recording, reproducing and displaying machines with calculating functions; accounting machines, postage-franking machines, ticket-issuing machines and similar machines, incorporating a calculating device; cash registers |
| 8470.10.00 | Electronic calculators capable of operation without an external source of electric power and pocket-size data-recording, reproducing and displaying machines with calculating functions |
| - | Other electronic calculating machines |
| 8470.21.00 | Incorporating a printing device |
| 8470.29.00 | Other |
| 8470.30.00 | Other calculating machines |
| 8470.50.00 | Cash registers |
| 8470.90.00 | Other |
| 8471 | Automatic data-processing machines and units thereof; magnetic or optical readers, machines for transcribing data onto data media in coded form and machines for processing such data, not elsewhere specified or included |
| 8471.30.00 | Portable automatic data-processing machines, weighing not more than 10 kg, consisting of at least a central processing unit, a keyboard and a display |
| - | Other automatic data-processing machines |
| 8471.41.00 | Comprising in the same housing at least a central processing unit and an input and output unit, whether or not combined |
| 8471.49.00 | Other, presented in the form of systems |
| 8471.50.00 | Processing units other than those of subheading 8471 41 or 8471 49, whether or not containing in the same housing one or two of the following types of unit: storage units, input units, output units |
| 8471.60.00 | Input or output units, whether or not containing storage units in the same housing |
| 8471.60.60.00 | Keyboards |
| 8471.60.70.00 | Other |
| 8471.70.00 | Storage units |
| 8471.70.20.00 | Central storage units |
| - | Other |
| - | Disk storage units |
| 8471.70.30.00 | Optical, including magneto-optical |
| - | Other |
| 8471.70.50.00 | Hard disk drives |
| 8471.70.70.00 | Other |
| 8471.70.80.00 | Magnetic tape storage units |
| 8471.70.98.00 | Other |
| 8471.80.00 | Other units of automatic data-processing machines |
| 8471.90.00 | Other |
| 8472 | Other office machines (for example, hectograph or stencil duplicating machines, addressing machines, automatic banknote dispensers, coin-sorting machines, coin-counting or -wrapping machines, pencil-sharpening machines, perforating or stapling machines) |
| 8472.10.00 | Duplicating machines |
| 8472.30.00 | Machines for sorting or folding mail or for inserting mail in envelopes or bands, machines for opening, closing or sealing mail and machines for affixing or cancelling postage stamps |
| 8472.90.00 | Other |
| 8472.90.10.00 | Coin-sorting, coin-counting or coin-wrapping machines |
| 8472.90.80.00 | Other |
| 8473 | Parts and accessories (other than covers, carrying cases and the like) suitable for use solely or principally with machines of headings 8470 to 8472 |
| - | Parts and accessories of the machines of heading 8470 |
| 8473.21.00 | Of the electronic calculating machines of subheading 8470 10, 8470 21 or 8470 29 |
| 8473.21.10.00 | Electronic assemblies |
| 8473.21.90.00 | Other |
| 8473.29.00 | Other |
| 8473.29.10.00 | Electronic assemblies |
| 8473.29.90.00 | Other |
| 8473.30.00 | Parts and accessories of the machines of heading 8471 |
| 8473.30.20.00 | Electronic assemblies |
| 8473.30.80.00 | Other |
| 8473.40.00 | Parts and accessories of the machines of heading 8472 |
| 8473.40.10.00 | Electronic assemblies |
| 8473.40.80.00 | Other |
| 8473.50.00 | Parts and accessories equally suitable for use with machines of two or more of the headings 8470 to 8472 |
| 8473.50.20.00 | Electronic assemblies |
| 8473.50.80.00 | Other |
| 8474 | Machinery for sorting, screening, separating, washing, crushing, grinding, mixing or kneading earth, stone, ores or other mineral substances, in solid (including powder or paste) form; machinery for agglomerating, shaping or moulding solid mineral fuels, ceramic paste, unhardened cements, plastering materials or other mineral products in powder or paste form; machines for forming foundry moulds of sand |
| 8474.10.00 | Sorting, screening, separating or washing machines |
| 8474.20.00 | Crushing or grinding machines |
| - | Mixing or kneading machines |
| 8474.31.00 | Concrete or mortar mixers |
| 8474.32.00 | Machines for mixing mineral substances with bitumen |
| 8474.39.00 | Other |
| 8474.80.00 | Other machinery |
| 8474.80.10.00 | Machinery for agglomerating, shaping or moulding ceramic paste |
| 8474.80.90.00 | Other |
| 8474.90.00 | Parts |
| 8474.90.10.00 | Of cast iron or cast steel |
| 8474.90.90.00 | Other |
| 8475 | Machines for assembling electric or electronic lamps, tubes or valves or flashbulbs, in glass envelopes; machines for manufacturing or hot working glass or glassware |
| 8475.10.00 | Machines for assembling electric or electronic lamps, tubes or valves or flashbulbs, in glass envelopes |
| - | Machines for manufacturing or hot working glass or glassware |
| 8475.21.00 | Machines for making optical fibres and preforms thereof |
| 8475.29.00 | Other |
| 8475.90.00 | Parts |
| 8475.90.10.00 | Parts of machines of subheading 8475 21 00 |
| 8475.90.90.00 | Other |
| 8476 | Automatic goods-vending machines (for example, postage stamp, cigarette, food or beverage machines), including money-changing machines |
| - | Automatic beverage-vending machines |
| 8476.21.00 | Incorporating heating or refrigerating devices |
| 8476.29.00 | Other |
| - | Other machines |
| 8476.81.00 | Incorporating heating or refrigerating devices |
| 8476.89.00 | Other |
| 8476.89.10.00 | Money-changing machines |
| 8476.89.90.00 | Other |
| 8476.90.00 | Parts |
| 8476.90.10.00 | Parts of money-changing machines |
| 8476.90.90.00 | Other |
| 8477 | Machinery for working rubber or plastics or for the manufacture of products from these materials, not specified or included elsewhere in this chapter |
| 8477.10.00 | Injection-moulding machines |
| 8477.20.00 | Extruders |
| 8477.30.00 | Blow-moulding machines |
| 8477.40.00 | Vacuum-moulding machines and other thermoforming machines |
| - | Other machinery for moulding or otherwise forming |
| 8477.51.00 | For moulding or retreading pneumatic tyres or for moulding or otherwise forming inner tubes |
| 8477.59.00 | Other |
| 8477.59.10.00 | Presses |
| 8477.59.80.00 | Other |
| 8477.80.00 | Other machinery |
| - | Machines for the manufacture of foam products |
| 8477.80.11.00 | Machines for processing reactive resins |
| 8477.80.19.00 | Other |
| - | Other |
| 8477.80.91.00 | Size reduction equipment |
| 8477.80.93.00 | Mixers, kneaders and agitators |
| 8477.80.95.00 | Cutting, splitting and peeling machines |
| 8477.80.99.00 | Other |
| 8477.80.99.10 | Machines for casting or for surface modification of plastic membranes of heading 3921 |
| 8477.80.99.90 | Other |
| 8477.90.00 | Parts |
| 8477.90.10.00 | Of cast iron or cast steel |
| 8477.90.80.00 | Other |
| 8478 | Machinery for preparing or making up tobacco, not specified or included elsewhere in this chapter |
| 8478.10.00 | Machinery |
| 8478.90.00 | Parts |
| 8479 | Machines and mechanical appliances having individual functions, not specified or included elsewhere in this chapter |
| 8479.10.00 | Machinery for public works, building or the like |
| 8479.20.00 | Machinery for the extraction or preparation of animal or fixed vegetable or microbial fats or oils |
| 8479.30.00 | Presses for the manufacture of particle board or fibre building board of wood or other ligneous materials and other machinery for treating wood or cork |
| 8479.30.10.00 | Presses |
| 8479.30.90.00 | Other |
| 8479.40.00 | Rope- or cable-making machines |
| 8479.50.00 | Industrial robots, not elsewhere specified or included |
| 8479.60.00 | Evaporative air coolers |
| - | Passenger boarding bridges |
| 8479.71.00 | Of a kind used in airports |
| 8479.79.00 | Other |
| - | Other machines and mechanical appliances |
| 8479.81.00 | For treating metal, including electric wire coil-winders |
| 8479.82.00 | Mixing, kneading, crushing, grinding, screening, sifting, homogenising, emulsifying or stirring machines |
| 8479.83.00 | Cold isostatic presses |
| 8479.89.00 | Other |
| 8479.89.30.00 | Mobile hydraulic-powered mine roof supports |
| 8479.89.60.00 | Central greasing systems |
| 8479.89.70.00 | Automated electronic component placement machines of a kind used solely or principally for the manufacture of printed circuit assemblies |
| 8479.89.97.00 | Other |
| 8479.89.97.10 | The following goods, for use in civil aircraft :!1!Hydropneumatic batteries;!1!Mechanical actuators for thrust reversers;!1!Toilet units specially designed;!1!Air humidifiers and dehumidifiers;!1!Servo-mechanisms, non-electric;!1!Non-electric starter motors;!1!Pneumatic starters for turbo-jets, turbopropellers and other gas turbines;!1!Windscreen wipers, non-electric;!1!Propeller regulators, non-electric!1! |
| 8479.89.97.28 | Integrated electric brake unit for immediate generation of the hydraulic pressure during braking, full electronic brake control and enabling regenerative braking of motor vehicles with:, , -electronic brake assistants,, , -hydraulic unit driven by brushless electric motor,, , -brake fluid reservoir,, for use in the manufacture of plug-in hybrid passenger cars |
| 8479.89.97.35 | Mechanical unit ensuring the movement of the camshaft with:, - 6 or 8 oil chambers,, - a phasing range of at least 18° but not more than 62°,, - a steel and/or steel alloy sprocket,, - a steel and/or steel alloy and/or aluminium alloy rotor |
| 8479.89.97.38 | Camshaft actuator for controlling the timing of valve opening by using electromotor in a continuous variable valve timing system of an internal combustion piston engine, of:, , -a length of 110 mm or more but not more than 140 mm,, , -a width of 90 mm or more but not more than 130 mm,, , -a height of 80 mm or more but not more than 110 mm, for use in the manufacture of engines of motor vehicles |
| 8479.89.97.55 | Integrated automated turnkey machinery line for manufacturing jelly rolls of cylindrical lithium ion battery cells by winding, tab assembly and cutting of cathode, separator and anode |
| 8479.89.97.60 | Bioreactor for biopharmaceutical cell culture, - having interior surfaces of austenitic stainless steel, and, - with a process capacity up to 15 000 litres,, - whether or not combined with a “clean-in-process” system and/or a dedicated paired media hold vessel |
| 8479.89.97.65 | Integrated automated turnkey machinery line for the assembly of battery cells to cylindrical lithium ion batteries with a speed of 300 parts per minute and production line |
| 8479.89.97.70 | Machine to accurately align and attach lenses into a camera assembly in five axis alignment capability and fix them in position with a two part cure epoxy |
| 8479.89.97.90 | Other |
| 8479.90.00 | Parts |
| 8479.90.15.00 | Parts of machines of subheading 8479 89 70 |
| - | Other |
| 8479.90.20.00 | Of cast iron or cast steel |
| 8479.90.20.10 | For use in civil aircraft |
| 8479.90.20.90 | Other |
| 8479.90.70.00 | Other |
| 8479.90.70.10 | For use in civil aircraft |
| - | Other |
| 8479.90.70.30 | Silicone or plastic keyboards, comprising:, , -parts of common metal, and, , -whether or not comprising parts of plastic,, , -epoxy resin reinforced with fiberglass or wood,, , -whether or not printed or surface-treated,, , -with or without electrical conductors, , -with or without a membrane bonded to the keyboard,, , -with or without mono or multilayer protective film |
| 8479.90.70.40 | Housing of the rotor part of the mechanical unit ensuring the adjustment of movement of the camshaft compared to the crankshaft:, , -of a circular shape,, , -made of steel alloy with sintering process,, , -with not more than 8 oil chambers,, , -with a Rockwell hardness of 55 or more,, , -with a density of 6,5 g/cm³, or more, but not more than 6,7 g/cm³ |
| 8479.90.70.50 | Rotor part of the mechanical unit ensuring the movement of the camshaft compared to the crankshaft:, , -with 4 blades that end in grooves,, , -made of steel alloy with sintering process |
| 8479.90.70.85 | Injectors with solenoid valve for optimised atomisation in the engine combustion chamber |
| 8479.90.70.99 | Other |
| 8480 | Moulding boxes for metal foundry; mould bases; moulding patterns; moulds for metal (other than ingot moulds), metal carbides, glass, mineral materials, rubber or plastics |
| 8480.10.00 | Moulding boxes for metal foundry |
| 8480.20.00 | Mould bases |
| 8480.30.00 | Moulding patterns |
| 8480.30.10.00 | Of wood |
| 8480.30.90.00 | Other |
| - | Moulds for metal or metal carbides |
| 8480.41.00 | Injection or compression types |
| 8480.49.00 | Other |
| 8480.50.00 | Moulds for glass |
| 8480.60.00 | Moulds for mineral materials |
| - | Moulds for rubber or plastics |
| 8480.71.00 | Injection or compression types |
| 8480.79.00 | Other |
| 8481 | Taps, cocks, valves and similar appliances for pipes, boiler shells, tanks, vats or the like, including pressure-reducing valves and thermostatically controlled valves |
| 8481.10.00 | Pressure-reducing valves |
| 8481.10.05.00 | Combined with filters or lubricators |
| 8481.10.05.10 | For use in certain types of aircraft |
| 8481.10.05.90 | Other |
| - | Other |
| 8481.10.19.00 | Of cast iron or of steel |
| 8481.10.19.10 | For use in certain types of aircraft |
| 8481.10.19.30 | Electromagnetic pressure reducing valve, , -with a plunger,, , -with an operating pressure of not more than 325 MPa,, , -with a plastic connector with 2 silver or tin, or silver-plated, or tin-plated, or silver and tin plated pins |
| 8481.10.19.90 | Other |
| 8481.10.99.00 | Other |
| 8481.10.99.10 | For use in certain types of aircraft |
| 8481.10.99.20 | Electromagnetic pressure reducing valve, - with a plunger,, - with an operating pressure of not more than 325MPa,, - with a plastic connector with 2 silver or tin, or silver-plated, or tin-plated, or silver and tin plated pins |
| 8481.10.99.40 | Pressure reducing valves in a brass case with:, , -a length of not more than 30 mm (± 1 mm),, , -a width of not more than 18 mm (± 1 mm),, of a kind used for incorporation in fuel delivery modules of motor vehicles |
| 8481.10.99.90 | Other |
| 8481.20.00 | Valves for oleohydraulic or pneumatic transmissions |
| 8481.20.10.00 | Valves for the control of oleohydraulic power transmission |
| 8481.20.10.20 | For use in certain types of aircraft |
| 8481.20.10.90 | Other |
| 8481.20.90.00 | Valves for the control of pneumatic power transmission |
| 8481.20.90.20 | For use in certain types of aircraft |
| 8481.20.90.90 | Other |
| 8481.30.00 | Check (non-return) valves |
| 8481.30.91.00 | Of cast iron or of steel |
| 8481.30.91.20 | For use in certain types of aircraft |
| - | Other |
| 8481.30.91.30 | Mechanical check (non-return) valve for opening and closing of the flow of fuel:, , -with an operating pressure of not more than 250 MPa,, , -with a flow rate of 45 cm³/minute or more, but not more than 55 cm³/minute,, , -with 4 input holes, each of them with a diameter of 1,2 mm or more, but not more than 1,6 mm,, , -made of steel |
| 8481.30.91.91 | Steel check (non-return) valves with:, , - an opening pressure of not more than 800 kPa, , - an external diameter not more than 37 mm |
| 8481.30.91.99 | Other |
| 8481.30.99.00 | Other |
| 8481.30.99.20 | For use in certain types of aircraft |
| 8481.30.99.30 | Brake booster check valve assembly containing at least:, , -three vulcanized rubber hoses,, , -one membrane valve,, , -two metal clamps,, , -one metal holder,, , -whether or not connecting metal pipe,, for use in the manufacture of motor vehicles |
| 8481.30.99.50 | Mechanical check (non-return) valve for opening and closing of the flow of fuel:, , -with an operating pressure of not more than 250 MPa,, , -with a flow rate of 45 cm³/minute or more, but not more than 55 cm³/minute,, , -with 4 input holes, each of them with a diameter of 1,2 mm or more, but not more than 1,6 mm,, , -made of steel |
| 8481.30.99.90 | Other |
| 8481.40.00 | Safety or relief valves |
| 8481.40.10.00 | Of cast iron or of steel |
| 8481.40.10.50 | For use in certain types of aircraft |
| 8481.40.10.90 | Other |
| 8481.40.90.00 | Other |
| 8481.40.90.10 | For use in certain types of aircraft |
| 8481.40.90.90 | Other |
| 8481.80.00 | Other appliances |
| - | Taps, cocks and valves for sinks, washbasins, bidets, water cisterns, baths and similar fixtures |
| 8481.80.11.00 | Mixing valves |
| 8481.80.11.10 | For use in certain types of aircraft |
| 8481.80.11.90 | Other |
| 8481.80.19.00 | Other |
| 8481.80.19.10 | For use in certain types of aircraft |
| 8481.80.19.90 | Other |
| - | Central heating radiator valves |
| 8481.80.31.00 | Thermostatic valves |
| 8481.80.39.00 | Other |
| 8481.80.40.00 | Valves for pneumatic tyres and inner tubes |
| 8481.80.40.10 | For use in certain types of aircraft |
| 8481.80.40.90 | Other |
| - | Other |
| - | Process control valves |
| 8481.80.51.00 | Temperature regulators |
| 8481.80.59.00 | Other |
| 8481.80.59.10 | Air control valve, consisting of a stepping motor and a valve pintle, for the regulation of idle air flow in fuel injection engines |
| 8481.80.59.20 | Pressure regulating valve for incorporation into compressors of motor vehicle air condition units |
| 8481.80.59.30 | Two-way flow control valve with housing, with:, - at least 5, but not more than 16 outlet holes with at least 0,05 mm, but not more than 0,5 mm diameter,, - at least 330 cm³/minute, but not more than 5 000 cm³/minute flow rate,, - at least 19, but not more than 300 MPa operating pressure |
| 8481.80.59.40 | Flow-control valve, - made of steel,, - with an outlet hole with a diameter of at least 0,05mm or more, but not more than 0,5 mm,, - with an inlet hole with a diameter of at least 0,1 mm, but not more than 1,3 mm,, - with chromium nitride coating,, - with a surface roughness of Rp 0,4 |
| 8481.80.59.50 | Electromagnetic valve for quantity control with, - a plunger,, - a solenoid with a of coil resistance of at least 1,85 Ohm, but not more than 8,2 Ohm |
| 8481.80.59.60 | Electromagnetic valve for quantity control, - with a solenoid with a coil resistance of at least 0,19 Ohm, but not more than 0,66 Ohm, and with an inductance of not more than 1 mH |
| 8481.80.59.70 | Flow-control valve, , -made of steel,, , -with an outlet hole with a diameter of at least 0,05 mm, but not more than 0,5 mm,, , -with an inlet hole with a diameter of at least 0,1 mm, but not more than 1,3 mm |
| 8481.80.59.90 | Other |
| - | Other |
| - | Gate valves |
| 8481.80.61.00 | Of cast iron |
| 8481.80.63.00 | Of steel |
| 8481.80.63.50 | For use in certain types of aircraft |
| 8481.80.63.90 | Other |
| 8481.80.69.00 | Other |
| 8481.80.69.50 | For use in certain types of aircraft |
| - | Other |
| 8481.80.69.60 | Four-way reversing valve for refrigerants, consisting of:, , - a solenoid pilot valve, , - a brass valve body including valve slider and copper connections, with a working pressure up to 4,5 MPa |
| 8481.80.69.99 | Other |
| - | Globe valves |
| 8481.80.71.00 | Of cast iron |
| 8481.80.73.00 | Of steel |
| 8481.80.73.10 | For use in certain types of aircraft |
| 8481.80.73.20 | Pressure- and flow-control valve controlled by external electromagnet:, , - made of steel and/or steel alloy(s),, , - without integrated circuit,, , - of not more than 1000 kPa operating pressure,, , - with a flow quantity of not more than 5 l/min,, , - without an electromagnet |
| 8481.80.73.90 | Other |
| 8481.80.79.00 | Other |
| 8481.80.79.10 | For use in certain types of aircraft |
| 8481.80.79.30 | Service Valve which suits for R410A or R32 gas while connecting indoor and outdoor units with:, -a withstanding pressure of the valve body of 6,3 MPa,, -a leakage ratio of less than 1,6 g/a,, -an impurity ratio of less than 1,2 mg/PCS,, -an airtight pressure of the valve body of 4,2 MPa,, for use in the manufacture of air conditioners |
| 8481.80.79.90 | Other |
| 8481.80.81.00 | Ball and plug valves |
| 8481.80.81.30 | For use in certain types of aircraft |
| 8481.80.81.90 | Other |
| 8481.80.85.00 | Butterfly valves |
| 8481.80.85.30 | For use in certain types of aircraft |
| 8481.80.85.90 | Other |
| 8481.80.87.00 | Diaphragm valves |
| 8481.80.87.30 | For use in certain types of aircraft |
| 8481.80.87.90 | Other |
| 8481.80.99.00 | Other |
| 8481.80.99.30 | Service Valve which suits for R410A or R32 gas while connecting indoor and outdoor units with:, -a withstanding pressure of the valve body of 6,3 MPa,, -a leakage ratio of less than 1,6 g/a,, -an impurity ratio of less than 1,2 mg/PCS,, -an airtight pressure of the valve body of 4,2 MPa,, for use in the manufacture of air conditioners |
| 8481.80.99.40 | For use in certain types of aircraft |
| 8481.80.99.70 | Pressure- and flow-control valve controlled by external electromagnet:, , - made of steel and/or steel alloy(s),, , - without integrated circuit,, , - of not more than 1000 kPa operating pressure,, , - with a flow quantity of not more than 5 l/min,, , - without an electromagnet |
| 8481.80.99.90 | Other |
| 8481.90.00 | Parts |
| 8481.90.00.10 | For use in certain types of aircraft |
| 8481.90.00.40 | Valve armature:, , - for the opening and closing of the flow of fuel,, , - consisting of a shaft and a blade,, , - with at least 3 but not more than 8 holes on the blade,, , - made of metal and/or metal alloy(s) |
| 8481.90.00.50 | Silicone or plastic keyboards, comprising:, , -parts of common metal, and, , -whether or not comprising parts of plastic,, , -epoxy resin reinforced with fiberglass or wood,, , -whether or not printed or surface-treated,, , -with or without electrical conductors, , -with or without a membrane bonded to the keyboard,, , -with or without mono or multilayer protective film |
| 8481.90.00.60 | Nozzle body for the regulation of angle and distribution of fuel injection:, , -of a cylindrical shape,, , -made of stainless steel,, , -with 4 or more, but not more than 16 holes,, , -with a flow rate of 100 cm³/minute or more, but not more than 500 cm³/minute |
| 8481.90.00.70 | Nozzle needle for opening and closing the flow of fuel in the engine, with:, , -2 holes,, , -4 grooves,, , -a diameter of 3 mm or more, but not more than 6 mm,, , -a length of 25 mm or more, but not more than 35 mm,, , -made of stainless steel with hard-chrome plating |
| 8481.90.00.80 | Flow-control valve, , -made of steel,, , -with an outlet hole with a diameter of at least 0,05 mm, but not more than 0,5 mm,, , -with an inlet hole with a diameter of at least 0,1 mm, but not more than 1,3 mm |
| 8481.90.00.90 | Other |
| 8482 | Ball or roller bearings |
| 8482.10.00 | Ball bearings |
| 8482.10.10.00 | With greatest external diameter not exceeding 30 mm |
| 8482.10.10.10 | Ball and cylindrical bearings:, , - with an outside diameter of 28 mm or more but not more than 140 mm,, , - with an operational thermal stress of more than 150°C at a working pressure of not more than 14 MPa,, for the manufacture of machinery for the protection and control of nuclear reactors in nuclear power plants |
| 8482.10.10.15 | Ball bearings with:, , -an internal diameter of 4 mm or more but not more than 9 mm,, , -an external diameter of not more than 26 mm,, , -a width of not more than 8 mm,, for use in the manufacture of electromotors with a range of 40 000 rpm or more but not more than 80 000 rpm |
| 8482.10.10.25 | Double row ball bearings / ball bearing cartridges:, , -with an internal diameter of 3 mm or more, but not more than 9 mm,, , -with an external diameter of 17 mm or more, but not more than 36 mm,, , -with a width of 6 mm or more, but not more than 69 mm,, , -manufactured according to ISO standard 492 - Class 5 or DIN 620 - P5 or ANSI Standard 20 - ABEC 5,, , -with ceramic balls,, for use in turbo compressors (turbochargers) |
| 8482.10.10.90 | Other |
| 8482.10.90.00 | Other |
| 8482.10.90.10 | Ball and cylindrical bearings:, , - with an outside diameter of 28 mm or more but not more than 140 mm,, , - with an operational thermal stress of more than 150°C at a working pressure of not more than 14 MPa,, for the manufacture of machinery for the protection and control of nuclear reactors in nuclear power plants |
| 8482.10.90.40 | Double row ball bearings / ball bearing cartridges:, , -with an internal diameter of 3 mm or more, but not more than 9 mm,, , -with an external diameter of 17 mm or more, but not more than 36 mm,, , -with a width of 6 mm or more, but not more than 69 mm,, , -manufactured according to ISO standard 492 - Class 5 or DIN 620 - P5 or ANSI Standard 20 - ABEC 5,, , -with ceramic balls,, for use in turbo compressors (turbochargers) |
| 8482.10.90.90 | Other |
| 8482.20.00 | Tapered roller bearings, including cone and tapered roller assemblies |
| 8482.30.00 | Spherical roller bearings |
| 8482.40.00 | Needle roller bearings, including cage and needle roller assemblies |
| 8482.50.00 | Other cylindrical roller bearings, including cage and roller assemblies |
| 8482.50.00.10 | Ball and cylindrical bearings:, , - with an outside diameter of 28 mm or more but not more than 140 mm,, , - with an operational thermal stress of more than 150°C at a working pressure of not more than 14 MPa,, for the manufacture of machinery for the protection and control of nuclear reactors in nuclear power plants |
| 8482.50.00.20 | Axial roller bearing made of steel:, , -the retainer is made of cold-rolled steel with a carbon content of up to 0,25 percent, complying with standard ASTM A109-98,, , -the rollers are made of anti-friction steel according to ASTM 295-94,, , -with an external diameter of 63 mm or more but not more than 66 mm,, , -with an internal diameter of 44 mm or more but not more than 46 mm,, , -with a weight of 23 g or more but not more than 27 g,, , -with 36 rollers or more but not more than 38 rollers |
| 8482.50.00.90 | Other |
| 8482.80.00 | Other, including combined ball/roller bearings |
| 8482.80.00.10 | Connecting components for use in the production of helicopter tail rotor shafts |
| 8482.80.00.90 | Other |
| - | Parts |
| 8482.91.00 | Balls, needles and rollers |
| 8482.91.10.00 | Tapered rollers |
| 8482.91.90.00 | Other |
| 8482.91.90.10 | Rollers with a logarithmic profile and a diameter of 25 mm or more but not more than 70 mm or balls with a diameter of 30 mm but not more than 100 mm,, - made of 100Cr6 steel or 100CrMnSi6-4 steel (ISO 3290),, - with a deviation of 0,5 mm or less as determined with the FBHmethod, for use in wind turbine industry |
| 8482.91.90.90 | Other |
| 8482.99.00 | Other |
| 8482.99.00.30 | Brass cages with the following characteristics:, – continuously or centrifugally cast,, – turned,, – containing by weight 35 % or more, but not more than 38 % of zinc,, – containing by weight 0,75 % or more, but not more than 1,25 % of lead,, – containing by weight 1,0 % or more, but not more than 1,4 % of aluminium, and, – with a tensile strength of 415 Pa or more,, of a kind used for the manufacture of ball bearings |
| 8482.99.00.60 | Inner or outer rings made of steel, not hardened or not grinded, outer ring with internal raceway(s), inner ring with external raceway(s), with external diameters of:, 14 mm or more but not more than 77 mm for the inner ring,, 26 mm or more but not more than 101 mm for the outer ring, for use in the manufacture of bearings |
| 8482.99.00.90 | Other |
| 8483 | Transmission shafts (including cam shafts and crank shafts) and cranks; bearing housings and plain shaft bearings; gears and gearing; ball or roller screws; gear boxes and other speed changers, including torque converters; flywheels and pulleys, including pulley blocks; clutches and shaft couplings (including universal joints) |
| 8483.10.00 | Transmission shafts (including cam shafts and crank shafts) and cranks |
| - | Cranks and crank shafts |
| 8483.10.21.00 | Of cast iron or cast steel |
| 8483.10.21.10 | For use in civil aircraft |
| 8483.10.21.90 | Other |
| 8483.10.25.00 | Of open-die forged steel |
| 8483.10.25.10 | For use in civil aircraft |
| 8483.10.25.90 | Other |
| 8483.10.29.00 | Other |
| 8483.10.29.10 | For use in civil aircraft |
| 8483.10.29.90 | Other |
| 8483.10.50.00 | Articulated shafts |
| 8483.10.50.10 | For use in civil aircraft |
| 8483.10.50.90 | Other |
| 8483.10.95.00 | Other |
| 8483.10.95.10 | For use in civil aircraft |
| 8483.10.95.30 | Steel alloy splined shaft (torque shaft) with straight teeth and involute profile, with:, , -external toothing in a diametral pitch standard,, , -17 teeth or more, but not more than 50 teeth,, , -a diameter of 35 mm or more, but not more than 145 mm,, , -a length of 200 mm or more, but not more than 1345 mm,, , -a hardness of 35 HRC or more, but not more than 45 HRC |
| 8483.10.95.90 | Other |
| 8483.20.00 | Bearing housings, incorporating ball or roller bearings |
| 8483.30.00 | Bearing housings, not incorporating ball or roller bearings; plain shaft bearings |
| - | Bearing housings |
| 8483.30.32.00 | For ball or roller bearings |
| 8483.30.32.10 | For use in civil aircraft |
| 8483.30.32.30 | Bearing housing of a kind used in turbochargers:, - of precision-cast grey cast iron complying with standard DIN EN 1561 or precision-cast ductile cast iron complying with DIN EN 1560,, - with oil chambers,, - without bearings,, - with a diameter of 50 mm or more, but not more than 250 mm,, - with a height of 40 mm or more, but not more than 150 mm,, - whether or not with water chambers and connectors |
| 8483.30.32.90 | Other |
| 8483.30.38.00 | Other |
| 8483.30.38.10 | For use in civil aircraft |
| - | Other |
| 8483.30.38.60 | Bearing housing of a kind used in turbochargers:, - of precision-cast grey cast iron complying with standard DIN EN 1561 or precision-cast ductile cast iron complying with DIN EN 1560,, - with oil chambers,, - without bearings,, - with a diameter of 50 mm or more, but not more than 250 mm,, - with a height of 40 mm or more, but not more than 150 mm,, - whether or not with water chambers and connectors |
| 8483.30.38.99 | Other |
| 8483.30.80.00 | Plain shaft bearings |
| 8483.30.80.10 | For use in civil aircraft |
| 8483.30.80.90 | Other |
| 8483.40.00 | Gears and gearing, other than toothed wheels, chain sprockets and other transmission elements presented separately; ball or roller screws; gear boxes and other speed changers, including torque converters |
| - | Gears and gearing (other than friction gears) |
| 8483.40.21.00 | Spur and helical |
| 8483.40.21.10 | For use in civil aircraft |
| 8483.40.21.90 | Other |
| 8483.40.23.00 | Bevel and bevel/spur |
| 8483.40.23.10 | For use in civil aircraft |
| 8483.40.23.90 | Other |
| 8483.40.25.00 | Worm gear |
| 8483.40.25.10 | For use in civil aircraft |
| 8483.40.25.20 | Worm gearbox, , -in an aluminium alloy housing,, , -with a plastic or steel worm,, , -with mounting holes,, , -with a 90 degree reversible drive direction,, , -with a 4:19 transmission ratio,, , -equipped with a lead screw with a length of 310 mm or more but not more than 380 mm,, -with a guide nut incorporated into the assembly bracket, , -with or without a lead screw support, , for indirect connection to the drive motor of a car seat guide system |
| 8483.40.25.90 | Other |
| 8483.40.29.00 | Other |
| 8483.40.29.10 | For use in civil aircraft |
| - | Other |
| 8483.40.29.50 | Gear set of cycloid gear type with:, - a rated torque of 50 Nm or more but not more than 9 000 Nm,, - standard ratios of 1:50 or more but not more than 1:475,, - lost motion of not more than one arc minute,, - an efficiency of more than 80 %, of a kind used in robot arms |
| 8483.40.29.60 | Epicyclic gearing, of a kind used in driving hand-held power tools with:, - a rated torque of 25 Nm or more, but not more than 70 Nm,, - standard gear ratios of 1:12.7 or more, but not more than 1:64.3 |
| 8483.40.29.70 | Cast steel planetary cage, with:, , -external or internal toothing in a diametral pitch standard,, , -27 teeth or more, but not more than 70 teeth,, , -a diameter of 300 mm or more, but not more than 725 mm,, , -a length of 225 mm or more, but not more than 800 mm,, , -3 or 4 planetary gears,, , -a hardness of 40 HRC or more, but not more than 45 HRC |
| 8483.40.29.89 | Other |
| 8483.40.30.00 | Ball or roller screws |
| 8483.40.30.10 | For use in civil aircraft |
| 8483.40.30.90 | Other |
| - | Gear boxes and other speed changers |
| 8483.40.51.00 | Gear boxes |
| 8483.40.51.10 | For use in civil aircraft |
| 8483.40.51.20 | Gear box, having a differential with wheel axle, for use in the manufacture of self-propelled lawnmowers with a seat of subheading 8433 11 51 |
| 8483.40.51.90 | Other |
| 8483.40.59.00 | Other |
| 8483.40.59.10 | For use in civil aircraft |
| 8483.40.59.30 | Hydrostatic speed changer:, , -with a hydro pump and a differential with wheel axle,, , -whether or not with a fan impeller and/or a pulley,, for use in the manufacture of lawn mowers of subheadings 8433 11 and 8433 19 or other mowers of subheading 8433 20 |
| 8483.40.59.90 | Other |
| 8483.40.90.00 | Other |
| 8483.40.90.10 | For use in civil aircraft |
| 8483.40.90.80 | Transmission gearbox, with: , - not more than 3 gears, , , - an automatic deceleration system and , , - a power reversal system, , for use in the manufacture of goods of heading 8427 |
| 8483.40.90.99 | Other |
| 8483.50.00 | Flywheels and pulleys, including pulley blocks |
| 8483.50.20.00 | Of cast iron or cast steel |
| 8483.50.20.10 | For use in civil aircraft |
| 8483.50.20.90 | Other |
| 8483.50.80.00 | Other |
| 8483.50.80.10 | For use in civil aircraft |
| 8483.50.80.20 | Pulley blocks of non-cast steel:, , -made of structural carbon steel complying with standard JIS G4051,, , -with an external diameter of 114 mm or more but not more than 118 mm,, , -with an internal diameter of 33 mm or more but not more than 37 mm,, , -with a width of 29 mm or more but not more than 33 mm,, , -with a weight of 0,6 kg or more but not more than 0,9 kg,, , -with 6 trapezoidal grooves |
| 8483.50.80.30 | Mechanical tensioner for maintaining the tension of the drive belts of a passenger car engine:, , -with two pulleys made of polyamide, each of them with a diameter of 50 mm or more but not more than 70 mm,, , -with a spring made of a steel alloy containing chromium and silicon,, , -with two arms made of aluminum,, , -with a holder made of aluminum,, for use in the manufacture of motor vehicle engines |
| 8483.50.80.90 | Other |
| 8483.60.00 | Clutches and shaft couplings (including universal joints) |
| 8483.60.20.00 | Of cast iron or cast steel |
| 8483.60.20.10 | For use in civil aircraft |
| 8483.60.20.90 | Other |
| 8483.60.80.00 | Other |
| 8483.60.80.10 | For use in civil aircraft |
| 8483.60.80.90 | Other |
| 8483.90.00 | Toothed wheels, chain sprockets and other transmission elements presented separately; parts |
| 8483.90.20.00 | Parts of bearing housings |
| 8483.90.20.10 | For use in civil aircraft |
| 8483.90.20.90 | Other |
| - | Other |
| 8483.90.81.00 | Of cast iron or cast steel |
| 8483.90.81.10 | For use in civil aircraft |
| 8483.90.81.90 | Other |
| 8483.90.89.00 | Other |
| 8483.90.89.10 | For use in civil aircraft |
| 8483.90.89.20 | Sprocket for continuous variable valve timing to optimize the process of filling the cylinders of an internal combustion engine with:, , -case,, , -rotor,, , -at least 4 screws,, , -spring,, , -of an external diameter of 80 mm or more but not exceeding 95 mm,, , -of a thickness of 25 mm or more but not more than 35 mm,, for use in the manufacture of engines of motor vehicles |
| 8483.90.89.30 | Forged steel sprockets with external toothing, whether or not with internal splines in a diametral pitch standard, with:, , -a diameter of 400 mm or more, but not more than 630 mm,, , -7 teeth or more, but not more than 15 teeth,, , -a tooth core hardness of 28 HRC or more, but not more than 45 HRC,, , -a tooth surface hardness of 50 HRC or more, but not more than 60 HRC,, , -whether or not, a spline hardness of 30 HRC or more, but not more than 45 HRC,, , -an effective carburized case depth of 4 mm or more, but not more than 5 mm |
| 8483.90.89.40 | Steel alloy gear wheels with straight teeth and involute profile, with:, , -external and/or internal toothing in a diametral pitch standard,, , -a diameter of 35 mm or more, but not more than 600 mm,, , -13 teeth or more, but not more than 80 teeth,, , -a tooth core hardness of 28 HRC or more, but not more than 45 HRC,, , -a tooth surface hardness of 50 HRC or more, but not more than 65 HRC,, , -an effective carburized case depth of 1,00 mm or more, but not more than 3,1 mm,, , -a spline hardness of 27 HRC or more, but not more than 62 HRC,, , -whether or not in combination with a shaft with a spline hardness of 27 HRC or more, but not more than 62 HRC |
| 8483.90.89.90 | Other |
| 8484 | Gaskets and similar joints of metal sheeting combined with other material or of two or more layers of metal; sets or assortments of gaskets and similar joints, dissimilar in composition, put up in pouches, envelopes or similar packings; mechanical seals |
| 8484.10.00 | Gaskets and similar joints of metal sheeting combined with other material or of two or more layers of metal |
| 8484.10.00.10 | For use in civil aircraft |
| 8484.10.00.90 | Other |
| 8484.20.00 | Mechanical seals |
| 8484.20.00.10 | Mechanical shaft seal for incorporation into rotary compressors for use in the manufacture of motor vehicle air condition units |
| 8484.20.00.20 | Mechanical face sealing device made of two movable rings (one ceramic mating, with a thermal conductivity lower than 80W/mK and the other carbon sliding), one spring and a nitrile sealant on the external side |
| 8484.20.00.90 | Other |
| 8484.90.00 | Other |
| 8484.90.00.10 | For use in civil aircraft |
| 8484.90.00.90 | Other |
| 8485 | Machines for additive manufacturing |
| 8485.10.00 | By metal deposit |
| 8485.20.00 | By plastics or rubber deposit |
| 8485.30.00 | By plaster, cement, ceramics or glass deposit |
| 8485.30.10.00 | By plaster, cement, or ceramic deposit |
| 8485.30.90.00 | Other |
| 8485.80.00 | Other |
| 8485.80.10.00 | Machines for additive manufacturing by sand, concrete or other mineral products deposit |
| 8485.80.90.00 | Other |
| 8485.90.00 | Parts |
| 8485.90.10.00 | Parts of machines of subheadings 8485 30 10 or 8485 80 10 |
| 8485.90.90.00 | Other |
| 8485.90.90.30 | Silicone or plastic keyboards, comprising:, , -parts of common metal, and, , -whether or not comprising parts of plastic,, , -epoxy resin reinforced with fiberglass or wood,, , -whether or not printed or surface-treated,, , -with or without electrical conductors, , -with or without a membrane bonded to the keyboard,, , -with or without mono or multilayer protective film |
| 8485.90.90.90 | Other |
| 8486 | Machines and apparatus of a kind used solely or principally for the manufacture of semiconductor boules or wafers, semiconductor devices, electronic integrated circuits or flat panel displays; machines and apparatus specified in note 11(C) to this chapter; parts and accessories |
| 8486.10.00 | Machines and apparatus for the manufacture of boules or wafers |
| 8486.20.00 | Machines and apparatus for the manufacture of semiconductor devices or of electronic integrated circuits |
| 8486.30.00 | Machines and apparatus for the manufacture of flat panel displays |
| 8486.40.00 | Machines and apparatus specified in note 11(C) to this chapter |
| 8486.90.00 | Parts and accessories |
| 8487 | Machinery parts, not containing electrical connectors, insulators, coils, contacts or other electrical features, not specified or included elsewhere in this chapter |
| 8487.10.00 | Ships' or boats' propellers and blades therefor |
| 8487.10.10.00 | Of bronze |
| 8487.10.90.00 | Other |
| 8487.90.00 | Other |
| 8487.90.40.00 | Of cast iron |
| 8487.90.40.10 | For use in certain types of aircraft |
| 8487.90.40.90 | Other |
| - | Of iron or steel |
| 8487.90.51.00 | Of cast steel |
| 8487.90.51.10 | For use in certain types of aircraft |
| 8487.90.51.90 | Other |
| 8487.90.57.00 | Of open-die forged or closed-die forged iron or steel |
| 8487.90.57.10 | For use in certain types of aircraft |
| 8487.90.57.90 | Other |
| 8487.90.59.00 | Other |
| 8487.90.59.10 | For use in certain types of aircraft |
| 8487.90.59.90 | Other |
| 8487.90.90.00 | Other |
| 8487.90.90.10 | For use in certain types of aircraft |
| 8487.90.90.90 | Other |
Need help to the find appropriate HS Code ?
or