HS Codes - 85: Electrical machinery and equipment and parts thereof; sound recorders and reproducers, television image and sound recorders and reproducers, and parts and accessories of such articles:

Motors of an output not exceeding 37,5 w:

For use in certain types of aircraft

Motors for air pumps, with:-operating voltage of 9 vdc or more but not more than 24 vdc,-operating temperature range of -40°c or more but not more than 80°c,-an output not exceeding 18 w for use in the manufacture of pneumatic support and ventilation systems for car seats

Linear actuator for automotive electric seat adjustment applications:-consisting of a permanently excited dc motor with an integrated gear mechanism and leadscrew, -whether brushed or brushless, -whether or not with electronic control unit, -whether or not with hall effect sensor, -with a nominal voltage of 8 v or higher but not higher than 16 v, -with a rated output mechanical power not exceeding 20 w, and-with a specified temperature range from -40 °c to 160 °c, for use in the manufacture of automotive components for car's seats

Electric controller for blinds of cooler, with an operating dc voltage of 9 v or more but not more than 16 v and a maximum power of less than 18 w, containing at least: -a printed circuit board, -an electric stepper motor, -a connector, -a plastic cover,for use in the manufacture of goods of chapter 87

Other:

For use in certain types of aircraft

Ac motors:

Other

For use in certain types of aircraft

Worm axis motor for automotive electric seat adjustment applications:-consisting of a permanently excited dc motor with a worm wheel,-whether brushed or brushless,-whether or not with electronic control unit,-whether or not with hall effect sensor,-with a nominal voltage of 8 v or more but not more than 16 v,-with a rated output mechanical power not exceeding 35 w, and-with a specified temperature range from -40 °c to 160 °c, for use in the manufacture of automotive components for car's seats

Rotary actuator for automotive electric seat adjustment applications:-consisting of a permanently excited dc motor with an integrated gear mechanism,-whether brushed or brushless,-whether or not with electronic control unit,-whether or not with hall effect sensor,-with a nominal voltage of 8 v or more but not more than 16 v,-with a rated output mechanical power not exceeding 35 w, and-with a specified temperature range from -40 °c to 160 °c,for use in the manufacture of automotive components for car's seats

Dc motor:- with a speed rotation of not more than 7 000 rpm without load,- with a nominal voltage of not more than 18 v,- with a maximum power of 24 w,- for a specific temperature range from -40°c to 160°c,- with or without a gear connection,- with or without a mechanical attachment interface,- with 2 electrical connections,- with a maximum torque of 100 nm

Dc motor - with a rotor speed of 3 500 rpm or more but not more than 5 000 rpm loaded and not more than 6 500 rpm when not loaded - with a power supply voltage of 100 v or more but not more than 240 vfor use in the manufacture of electric fryers

Electric turbocharger actuator, with: - a dc motor, - an integrated gear mechanism, - a (pulling)force of 200 n or more at a minimum of 140°c elevated ambient temperature, - a (pulling) force of 250 n or more in each position of its stroke, - an effective stroke of 15 mm or more but not more than 25 mm, - with or without an on-board diagnostics interface

Permanently excited dc motor with- a multiple-phase winding,- an external diameter of 24 mm or more but not more than 38 mm,- a rated speed of not more than 12 000 rpm,- a power supply voltage of 8 v or more but not more than 27 v,- with or without a pulley,- with or without a gear wheel

Dc stepping motor, with: - an angle of step of 7,5° (± 0,5°), - a pull-out torque at 25 °c of 25 mnm or more, - a pull-out pulse rate of 1 500 pps or more, - a two-phase winding, and - a rated voltage of 10,5 v or more, but not more than 16,0 v

Universal ac/dc motors of an output exceeding 37,5 w:

Of an output of less than 750 w or exceeding 150 kw, for use in certain types of aircraft

Universal ac/dc motor, rotating:-with a nominal supply voltage of 230 v,-with a power of more than 37,5 w but not more than 2 000 w,-with a stator cross-section of 93 mm or more but not more than 103 mm and a thickness of 15 mm or more but not more than 45 mm, and-with or without a worm gear, gears or a gearbox,for the production of a torque to a transmission shaft for small domestic appliances

Universal ac/dc motor, rotating:-with a nominal supply voltage of 230 v,-with a power of more than 37,5 w but not more than 700 w,-with a stator cross-section of 49 mm or more but not more than 59 mm and a thickness of 15 mm or more but not more than 45mm, and-with or without a worm gear, gears or a gearbox,for the production of a torque to a transmission shaft for small domestic appliances

Other dc motors; dc generators, other than photovoltaic generators:

Motors of an output exceeding 735 w, dc generators, for use in civil aircraft

Other:

Motor for automotive electric seat adjustment applications:-with a shaft output on both motor sides,-consisting of a permanently excited dc motor, -whether brushed or brushless, -whether or not with electronic control unit, -whether or not with hall effect sensor, -with a nominal voltage of 8 v or more but not more than 16 v, -with a rated output mechanical power not exceeding 120 w, and-with a specified temperature range from -40 °c to 160 °c, for use in the manufacture of automotive components for car's seats

Brushless dc electric motors: -with a rated power of 240 w or more, but not more than 260 w, -with voltage of 36 v or higher, but not higher than 52 v, -with torque of 30 nm or more, but not more than 50 nm, -with communication function uart or can interface, -with internal planetary gearbox with fixed or variable ratio, -made by cnc machined casting, -with housing made of aluminum, -weighing 2,3 kg or more, but not more than 4,4 kg, -adapted for mounting in the front or rear bicycle wheel

Dc motor with or without commutator, for driving hand-held power tools, lawn mowers or home appliances, with:-an external diameter of 24,2 mm or more, but not more than 140 mm,-a rated speed of 3300 rpm or more, but not more than 26200 rpm,-a rated supply voltage of 3,6 v or more, but not more than 230 v,-an output power of more than 37,5 w , but not more than 2400 w,-a free load current of not more than 20,1 a,-a maximum efficiency of 50 % or more,

Ready for installation in vehicles or equipment of headings 8432 and 8433, brushless and permanently excited direct current motor with: -a specified speed of not more than 4 100 rpm, -a minimum output of 400 w, but not more than 1,3 kw (at 12 v), or with a minimum output of 750 w but not more than 1,55 kw (at 36 v), -a flange diameter of 85 mm or more but not more than 200 mm, -a maximum length of 335 mm, measured from the beginning of the shaft to the outer ending, -a housing length of not more than 265 mm, measured from the flange to the outer ending, -a maximum of two-piece (basic housing including electric components and flange with minimum 2 and maximum 11 bore holes) aluminium diecast or sheet steel housing whether or not with a sealing compound (groove with an o-ring and grease), -a stator with single t-tooth design and single coil windings in 9/6 or 12/8 topology, and -surface magnets, -whether or not with electronic power steering controller, -whether or not with pulley, -whether or not with rotor position sensor

Electronic actuator consisting of:- a dc motor having a power of less than 600 w,- for usage with a supply voltage of 12 v to 48 v,- with motor connection (plug-in connection),- with contactless position sensor,- built in a rectangular housing of a width of less than 100 mm and a length of less than 150 mm, with reduction gear and lever attached to the motor drive shaft or- in a cylindrical housing of a length off less than 150mm and with a diameter of less than 100 mm, with threads integrated into the rotor of the motor for linear movement of the integrated control rod

Other

For use in civil aircraft

Dc motor with or without commutator, for driving hand-held power tools, lawn mowers or home appliances, with:-an external diameter of 24,2 mm or more, but not more than 140 mm,-a rated speed of 3300 rpm or more, but not more than 26200 rpm,-a rated supply voltage of 3,6 v or more, but not more than 230 v,-an output power of more than 37,5 w , but not more than 2400 w,-a free load current of not more than 20,1 a,-a maximum efficiency of 50 % or more,

Other

Motors of an output not exceeding 150 kw and generators, for use in civil aircraft

Electric drive for motor vehicles, with an output of not more than 315 kw:- with an ac or dc motor with or without transmission,- with or without power electronics

Of an output exceeding 375 kw:

Other

Of an output not exceeding 750 w:

For use in certain types of aircraft

Electric ac motor, single-phase, with: -a rated power of 275 w or more, but not more than 325 w, -an input power of 600 w or more but not more than 700 w, -an external diameter without bracket and connector of 150 mm or more but not more than 170 mm, -a rated speed of 15 000 rpm or more but not more than 20 000 rpm, -a weight of 4,2 kg or more, -a pulley and a tachometer,for use in the manufacture of home appliance products

Electric ac motor, single-phase, with: -a rated power of 275 w or more, but not more than 325 w, -an input power of 600 w or more but not more than 700 w, -an external diameter without bracket and connector of 160 mm or more but not more than 180 mm, -a rated speed of 15 000 rpm or more but not more than 19 000 rpm, -a weight of not more than 4,4 kg, -a pulley,for use in the manufacture of home appliance products

Electric ac motor, single-phase, whether or not with commutator- with a nominal output of 180 w or more,- with an input power of 150 w or more but not more than 2 700 w,- with an external diameter of more than 44,8 but not more than 135,2 mm,- with a rated speed of more than 10 000 rpm but not more than 50 000 rpm,- whether or not equipped with air-inducting ventilator,- whether or not with mechanical device (pinion, screws, gear connection etc.. ) on the shaft,for use in the manufacture of domestic appliances

Of an output exceeding 750 w:

Of an output exceeding 150 kw, for use in certain types of aircraft

Electric ac motor, single-phase, whether or not with commutator- with a nominal output of 180 w or more,- with an input power of 150 w or more but not more than 2 700 w,- with an external diameter of more than 44,8 but not more than 135,2 mm,- with a rated speed of more than 10 000 rpm but not more than 50 000 rpm,- whether or not equipped with air-inducting ventilator,- whether or not with mechanical device (pinion, screws, gear connection etc.. ) on the shaft,for use in the manufacture of domestic appliances

Other ac motors, multi-phase:

Of an output exceeding 735 w, for use in civil aircraft

Ac synchronous servo motor with resolver and brake for a maximum speed of not more than 6 000rpm,with:- an output of 340w or more but not more than 7,4kw,- a flange of dimensions of not more than 180mm × 180mm, and- a length from flange to extreme end of resolver of not more than 271mm

Three phase ac synchronous brushless permanent magnet motor with: -an output of 500 w or more but not more than 700 w, -an external diameter of 129,7 mm or more but not more than 180,3 mm, -a rated speed of 16 000 rpm or more but not more than 17 000 rpm, -a weight of 2,5 kg or more but not more than 3,1 kg, and -with a pulley,for use in the manufacture of home appliance products

Other

Of an output exceeding 750 w but not exceeding 7,5 kw:

Other:

Automotive-ready brushless permanently excited magnet synchronous ac-motor with -a specified speed of not more than 7 000 rpm, -a power rating of 400 w or more but not more than 1,8 kw (at 12 v), -a flange diameter of 80 mm or more, but not more than 200 mm, -a maximum length of not more than 220 mm, measured from the beginning of the shaft to its outer end, -a housing length of not more than 180 mm, measured from the flange to the outer end, -a steel sheet or die-cast aluminium basic housing consisting of not more than two parts, including electrical components and a flange with two or more but not more than 11 holes, whether or not with a sealing connection (groove with o-ring and protective grease or liquid seal interface), -a stator with single t-tooth design and single coil winding with 12/10 or 12/8 topology and surface magnets

Of an output exceeding 7,5 kw but not exceeding 37 kw:

Other

For use in civil aircraft

Of an output exceeding 75 kw:

Electric drive for motor vehicles, with an output of not more than 315 kw:- with an ac or dc motor with or without transmission,- with or without power electronics

Permanent magnet synchronous traction motor, with: -a continuous power of 110 kw or more but not more than 180 kw, -a liquid cooled system, -a total length of 500 mm or more but not more than 650 mm, -a total width of 600 mm or more but not more than 700 mm, -a total height of 550 mm or more but not more than 650 mm, -weighing of not more than 350 kg, -3 suspension points

Asynchronous traction motor, with: -a continuous power of 140 kw or more but not more than 180 kw, -a liquid cooled system, -a total length of 580 mm or more but not more than 730 mm, -a total width of 550 mm or more but not more than 670 mm, -a total height of 510 mm or more but not more than 630 mm, -with a weight of not more than 390 kg, -with or without reduction gear, -with or without starter generator, -2 mounting points,for use in the manufacture of the electric drive of hybrid buses

Other, of an output:

Of an output not exceeding 150 kw, for use in civil aircraft

Other

For use in certain types of aircraft

Exceeding 750 kw:

Other

Of an output not exceeding 75 kva:

For use in civil aircraft

Of an output exceeding 7,5 kva but not exceeding 75 kva:

Other

For use in civil aircraft

Other

For use in civil aircraft

Of an output exceeding 750 kva

Of an output not exceeding 50 w

Photovoltaic ac generators

Generating sets with compression-ignition internal combustion piston engines (diesel or semi-diesel engines):

Of an output not exceeding 7,5 kva:

Other

For use in civil aircraft

Of an output exceeding 75 kva but not exceeding 375 kva:

Other

Of an output exceeding 375 kva but not exceeding 750 kva:

Other

For use in civil aircraft

Of an output exceeding 2 000 kva:

Other

Of an output not exceeding 7,5 kva:

Other

For use in civil aircraft

Of an output exceeding 375 kva but not exceeding 750 kva:

Other

For use in civil aircraft

Other generating sets:

For use in civil aircraft:

Other

Utility scale wind turbines of an electrical power generation capacity – either in onshore or offshore applications - equal to or in excess of 1.. 00 megawatt, fitted in a steel wind tower and a nacelle, where the tower is tubular, whether or not tapered, whether or not assembled, whether or not including an embedded tower foundation section, whether or not joined with rotor blades, designed to support the nacelle and rotor blades, and with a minimum height of 50 meters measured from the base of the tower to the bottom of the nacelle when the tower is fully assembled

Other:

For use in civil aircraft

Other:

Other

For use in civil aircraft

Parts suitable for use solely or principally with the machines of heading 8501 or 8502:

For use in certain types of aircraft

Other:

For use in certain types of aircraft

Rotor, at the inner side provided with one or two magnetic rings (uniform or sectional) whether or not incorporated in a steel ring or bearing mounted in steel housing

Other:

Other:

Rotor, at the inner side provided with one or two magnetic rings (uniform or sectional) whether or not incorporated in a steel ring or bearing mounted in steel housing

Rotor for brushless motor of electrical power steering with a roundness tolerance of 50 μm

Silicone or plastic keyboards, comprising: -parts of common metal, and -whether or not comprising parts of plastic, -epoxy resin reinforced with fiberglass or wood, -whether or not printed or surface-treated, -with or without electrical conductors -with or without a membrane bonded to the keyboard, -with or without mono or multilayer protective film

Stator for brushless motor, with:-an internal diameter of 206,6 mm (± 0,5)-an external diameter of 265,0 mm (± 0,2) and-a width of 37,2 mm or more but not more than 47,8 mmof a kind used in the manufacture of washing machine, washer-dryer or dryer equipped with direct drive drums

Engine cover for electronic belt drive steering system ​​of galvanized steel with a thickness of not more than 2,5 mm (± 0,25 mm)

Rotor body of stacked electrical sheet having: -a diameter of 18 mm or more but not more than 35 mm, and -a length of 20 mm or more but not more than 65 mm

Steel motor housing having: -an inner diameter of 35 mm or more but not more than 65 mm, -an outer diameter of 35 mm or more but not more than 70 mm, and -a length of 35 mm or more but not more than 150 mm

Electrical transformers, static converters (for example, rectifiers) and inductors:

Inductors, whether or not connected with a capacitor:

Other

For use in civil aircraft

Liquid dielectric transformers:

Having a power handling capacity exceeding 650 kva but not exceeding 10 000 kva:

Exceeding 1 600 kva but not exceeding 10 000 kva

Other transformers:

Measuring transformers:

For use in civil aircraft

Other:

Other

For use in civil aircraft

Electrical transformer with - a capacity of 432 watts - dimensions of not more than 24 mm x 21 mm x19 mm - an operating temperature range of - 20 °c or more, but not more than + 85 °c - two windings and - 5 connection pins at the bottom

Electrical transformer with - a capacity of 433 watts - dimensions of not more than 37,3 x 38,2 x 28,5 mm - an operating temperature range of - 40 °c or more, but not more than + 125 °c - four inductively coupled copper wire windings and - 13 connection pins at the bottom

Transformers for use in the manufacture of electronic drivers, control devices and led light sources for lighting industry

Other

For use in civil aircraft

Having a power handling capacity exceeding 16 kva but not exceeding 500 kva:

Other

Static converters:

For use in civil aircraft

Other:

For use in civil aircraft

Inverters:

For use in civil aircraft

Having a power handling capacity exceeding 7,5 kva:

Other

For use in civil aircraft

Other inductors:

Other

Of transformers and inductors:

Steel laminations and cores, whether or not stacked or wound

Of static converters

Permanent magnets and articles intended to become permanent magnets after magnetisation:

Containing neodymium, praseodymium, dysprosium or samarium:

Other:

Bars in the form of arched rectangles, containing alloy containing neodymium, with: -a length of 15 mm or more but not more than 52 mm, -a width of 5 mm or more but not more than 42 mm, -whether or not coated or passivated with a surface treatment,intended to become permanent magnets after magnetisation

Articles containing alloy containing neodymium, in the form of rings, tubes, bushings or collars: -with an external diameter of not more than 45 mm, -with a height of not more than 45 mm, -whether or not coated or passivated with a surface treatment,intended to become permanent magnets after magnetisation

Article of an alloy of neodymium, in the shape of a disc, with: -a diameter of not more than 90 mm, -whether or not a hole in the centre, -layers of copper, nickel and/or zinc,intended to become permanent magnets after magnetisation

Articles in shape of flat bars, arched bars, quarter sleeves or trapezoid whether or not arched, rounded corners or oblique sides made of ferrite, or cobalt, or samarium or other rare-earth metals, or their alloy,- whether or not overmolded with polymers, - whether or not coated or passivated with a surface treatment,with:- a length of 5 mm or more, but not more than 60 mm,- a width of 5 mm or more, but not more than 40 mm,- a thickness of 3 mm or more, but not more than 15 mm,intended to become permanent magnets after magnetisation

Articles of an alloy of neodymium, or an alloy of samarium,- whether or not coated or passivated with a surface treatment,- whether or not covered with zinc,- in the shape of rectangles,with:- a length of 13,8 mm or more but not more than 45,2 mm,- a width of 7,8 mm or more but not more than 25,2 mm,- a height of 1,3 mm or more but not more than 4,7 mm,intended to become permanent magnets after magnetisation

Two permanent magnets made of a praseodymium-neodymium alloy, in a rectangular steel holder with an outer casing of rubber with outer dimensions: -a length of 200 mm or more but not more than 205 mm, -a width of 58 mm or more but not more than 62 mm, -a height of 25 mm or more but not more than 30 mm,with a stud mounted in the middle

Other:

Other:

Other

Permanent magnets of agglomerated ferrite:

Permanent magnet of agglomerated ferrite, in the shape of arched rectangles, whether or not coated or passivated with a surface treatment, with:- a length of 16,8 mm or more, but not more than 110,2 mm,- a width of 14,8 mm or more, but not more than 75,2 mm,- a thickness of 4,8 mm or more, but not more than 13,2 mm,for use in the manufacture of electromotor rotors

Other:

Other:

Article of agglomerated ferrite in the shape of a rectangle, whether or not with oblique sides, with: -a length of 26,85 mm or more but not more than 32,15 mm, -a width of 7,6 mm or more but not more than 9,55 mm, -a thickness of 5,3 mm or more but not more than 5,8 mm, and -a weight of 6,1 g or more but not more than 8,3 g,intended to become a permanent magnet after magnetisation

Articles in shape of flat bars, arched bars, quarter sleeves or trapezoid whether or not arched, rounded corners or oblique sides made of ferrite, or cobalt, or samarium or other rare-earth metals, or their alloy,- whether or not overmolded with polymers, - whether or not coated or passivated with a surface treatment,with:- a length of 5 mm or more, but not more than 60 mm,- a width of 5 mm or more, but not more than 40 mm,- a thickness of 3 mm or more, but not more than 15 mm,intended to become permanent magnets after magnetisation

Electromagnetic couplings, clutches and brakes:

Electromagnetic clutch, for use in the manufacture of compressors of air conditioning machines of motor vehicles

Other

Electromagnets; electromagnetic or permanent magnet chucks, clamps and similar holding devices:

Other:

Other

For use in certain types of aircraft

Parts:

Electromagnetic clutch coil in a cylindrical metal housing: -the metal housing is made of hot-rolled steel complying with standard jis g 3131 - sphe, -the coil is made of copper wire, -with a weight of 0,4 kg or more but not more than 0,7 kg, -with a width of 22 mm or more but not more than 25 mm, -with a plate reinforced to the coil (coil backplate) with an internal diameter of 44 mm or more but not more than 46 mm, -with an external diameter of 88 mm or more but not more than 96 mm, -without plunger, -with one connector

Primary cells and primary batteries:

Alkaline:

Other

Cylindrical cells

Mercuric oxide

Lithium:

Lithium cylindrical primary cells with: - a diameter of 14,0 mm or more but not more than 26,0 mm; - a length of 2,2 mm or more but not more than 51 mm; - a voltage of 1,5 v or more, but not more than 3,6 v; - a capacity of 0,15 ah or more, but not more than 5,00 ahfor use in the manufacture of telemetry and medical devices, electronic meters or remote controls

Button cells

Lithium iodine single cell battery the dimensions of which do not exceed 9 mm × 23 mm × 45 mm and a voltage of not more than 2,8 v

Other

Other primary cells and primary batteries:

Other

Cathode, in rolls, for air zinc button cell batteries (hearing aid batteries)

Electric accumulators, including separators therefor, whether or not rectangular (including square):

Working with liquid electrolyte:

Other

For use in civil aircraft

Other lead-acid accumulators:

For use in civil aircraft

Other:

Other

Hermetically sealed:

Other

For use in civil aircraft

Nickel-metal hydride:

Other

For use in civil aircraft

Lithium-ion polymer accumulator pack equipped with a battery management system and can-bus interface with:- 6 modules with 90 cells or more but not more than 192 cells,- a nominal voltage of 280 v or more but not more than 400 v,- a nominal capacity of 9,7 ah or more but not more than 120 ah,- a charging voltage of 110 v or more but not more than 495 v, andin a metal casing with:- a length of not more than 1 723 mm,- a width of not more than 1 162,23 mm,- a height of not more than 395 mm,for use in the manufacture of vehicle capable of being charged by plugging to external source of electric power of heading 8703

Rechargeable lithium-ion battery, based on lithium-iron-phosphate technology, with: -a fuse, -a cell-to-pack design, -a length of 985 mm or more but not more than 1 015 mm, -a width of 1 050 mm or more but not more than 1 070 mm -a height of 145 mm or more but not more than 160 mm, -a weight of 220 kg or more but not more than 250 kg, -a capacity of 200 ah or more, -a specific energy density of 130 wh/kg or more,for use in the manufacture of vehicles of subheading 8702 40

Lithium-ion rechargeable battery cell with: -a length of 190 mm or more but not more than 380 mm, -a width of 90 mm or more but not more than 150 mm, -a height of 4 mm or more but not more than 15 mm, -a weight of 0,1 kg or more but not more than 1,2 kg, -a nominal voltage of 3,0 vdc or more but not more than 4,0 vdc, -a nominal capacity of not more than 90 ah,for use in the manufacture of rechargeable hybrid and electric vehicle batteries

Cylindrical lithium-ion accumulator or module, with a length of 63 mm or more and a diameter of 17,2 mm or more, having a nominal capacity of 1 200 mah or more, for use in the manufacture of rechargeable batteries

Lithium-ion accumulator, with -multiple connected lithium-ion accumulator cells, -charging and monitoring electronics, -a power of 74 wh or more, but not more than 75 wh, -in a plastic housing with electrical connection contacts and lcd display,for use in the manufacture of cordless vacuum cleaners or rechargeable power sources therefor

Modules for the assembly of lithium-ion battery packs, with: -a length of 298 mm or more, but not more than 500 mm, -a width of 33,5 mm or more, but not more than 209 mm, -a height of 75 mm or more, but not more than 228 mm, -a weight of 3,6 kg or more, but not more than 17 kg, -a power of 458 wh or more, but not more than 3 510 wh, and -a voltage of less than 45 v or more than 70 v

Prismatic lithium-ion electric accumulator with: -a width of 120,0 mm or more but not more than 305,0 mm, -a thickness of 12,0 mm or more but not more than 67,0 mm, -a height of 72,0 mm or more but not more than 126,0 mm, -a nominal voltage of 3,6 v or more but not more than 3,75 v, and -a nominal capacity of 6,9 ah or more not more than 265 ah,for use in the manufacture of rechargeable electric vehicle batteries

Lithium-ion accumulator in a metal housing, with- a length of 65 mm or more, but not more than 225 mm,- a width of 10 mm or more, but not more than 75 mm,- a height of 60 mm or more, but not more than 285 mm,- a nominal voltage of 2,1 v or more, but not more than 3,8 v, and- a nominal capacity of 2,5 ah or more, but not more than 325 ah

Lithium-ion rechargeable batteries, with: -a length of 700 mm or more, but not more than 2 820 mm, -a width of 935 mm or more, but not more than 1 660 mm, -a height of 85 mm or more, but not more than 700 mm, -a weight of 250 kg or more, but not more than 700 kg, -a power of not more than 175 kwh, -a nominal voltage of 350 v or more, but not more than 430 v

A rechargeable lithium-ion battery, with: -a fuse, -a cell-to-pack design, -a length of 1 050 mm or more but not more than 1 070 mm, -a width of 624 mm or more but not more than 636 mm, -a height of 235 mm or more but not more than 245 mm, -a mass of 214,4 kg or more but not more than 227,6 kg, -a capacity of 228 ah, -an upper outer casing of a composite material, -an ip68 protection rating, -an energy density of 220wh/l or more, -a specific energy of 159 wh/kg or more, -without contactors,for the manufacture of batteries for electric buses

Other accumulators:

Other

Separators:

Other

For use in civil aircraft

Other

With self-contained electric motor:

Other

Parts:

Other

Food grinders and mixers; fruit or vegetable juice extractors

Parts

Shavers

Hair-removing appliances

Electrical ignition or starting equipment of a kind used for spark-ignition or compression-ignition internal combustion engines (for example, ignition magnetos, magneto-dynamos, ignition coils, sparking plugs and glow plugs, starter motors); generators (for example, dynamos, alternators) and cut-outs of a kind used in conjunction with such engines:

For use in civil aircraft

Ignition magnetos; magneto-dynamos; magnetic flywheels:

Other

For use in civil aircraft

Ignition coil: - with a length of 50 mm or more, but not more than 200 mm, - with an operating temperature of - 40 °c or more, but not more than 140 °c, and - with a voltage of 9 v or more, but not more than 16 v, - with or without connection cable,for use in the manufacture of engines of motor vehicles

Starter motors and dual purpose starter-generators:

Other

For use in civil aircraft

Other equipment:

Ignition module: -made with plastics and non-ferrous metals, -with the electric components cast in epoxy resin, -to generate the ignition energy and to electronically control the ignition timing, -to connect spark plug and circuit breaker, for use in the manufacture of two-stroke engines

Parts:

Other

Lighting or visual signalling equipment of a kind used on bicycles

An electrical component with an integrated led, in an abs housing, with: -a voltage of 11 v or more, but not more than 15 v, -a circular shape, -2 terminals, -an outer diameter of the housing of 42,3 mm, -a diode voltage of 42 v or more, but not more than 48 v and -a current of 55 ma or more, but not more than 65 ma

Fog lamp with a galvanised inner surface, containing: - a plastic holder with three or more brackets, - one or more 12 v bulbs, - a connector, - a plastic cover, - whether or not with a connection cablefor use in the manufacture of goods of chapter 87

Electrical component with light guide integrated with led, for motor vehicles with: -two parallel ribs in the front area with a distance between them of 1,4 mm or more but not more than 1,8 mm, -four holes with the dimension of 7,3 mm or more but not more than 7,9 mm in the short direction of the guide, and -a 3 pines connector,for use in the manufacture of automotive components

Other

Burglar alarms of a kind used for motor vehicles

Horn assembly operating on piezomechanical principle for generating a specific sound signal, with a voltage of 12 v, comprising: - coil, - magnet, - metal membrane, - connector, - holderof a kind used in the manufacture of goods of chapter 87

Sound alarm device for protection against burglary into the vehicle:- with an operating temperature of - 45 °c or more, but not more than + 95 °c,- with a voltage of 9 v or more but not more than 16 v,- in a plastic housing,- whether or not with a metal holderfor use in the manufacture of motor vehicles

Other

Car door mirror heating foil: - with two electrical contacts, - with an adhesive layer on both sides (on the side of the plastic holder of the mirror and on the side of the mirror glass), - with a protective paper film on both sides

Parts:

Other

Lamps

Industrial or laboratory electric furnaces and ovens (including those functioning by induction or dielectric loss); other industrial or laboratory equipment for the heat treatment of materials by induction or dielectric loss:

Hot isostatic presses

Bakery and biscuit ovens

Furnaces and ovens functioning by induction or dielectric loss:

Dielectric furnaces and ovens:

Other

Electron beam furnaces:

Other

Of a kind used solely or principally for the manufacture of printed circuits or printed circuit assemblies

Other:

Other

Parts:

Other

Brazing or soldering machines and apparatus:

Other:

Other

Fully or partly automatic

Machines and apparatus for arc (including plasma arc) welding of metals:

Other:

Transformers

Other

For treating metals

Parts:

Other:

Other

Electric instantaneous or storage water heaters and immersion heaters:

Other:

Other

Storage heating radiators

Liquid-filled radiators

Other:

Other

Hairdryers

Hand-drying apparatus

Microwave ovens:

Other

Cookers (incorporating at least an oven and a hob)

Grillers and roasters

Cavity assembly comprising at least: - a transformer with an input of not more than 240 v and an output of not more than 3 000 w - an ac or dc fan motor with an output of not more than 42 watts - a housing made of stainless steel - with or without a magnetron of a microwave output power of not more than 900 wfor use in the manufacture of built-in products of headings 8514 2080, 8516 5000 and 8516 6080

Other

Coffee or tea makers

Other:

Other:

Other

Assembled with an insulated former:

Car door mirror heating foil: - with two electrical contacts, - with an adhesive layer on both sides (on the side of the plastic holder of the mirror and on the side of the mirror glass), - with a protective paper film on both sides

Other

For heating aircraft and wing surfaces, mounted on propeller aeroplanes, and for use in certain types of aircraft

Legs, tops and iron rests of ironing boards, including of sleeve boards, whether or not free standing, with a steam soaking and/or heating top and/or blowing top

Inner pot - containing side and central openings, - of annealed aluminium, - with a ceramic coating, heat resistant to more than 200° cfor use in the manufacture of an electric fryer

Other

Telephone sets, including smartphones and other telephones for cellular networks or for other wireless networks:

Smartphones

Other

Base stations

Other:

Entry-phone systems

Other

Aerials and aerial reflectors of all kinds; parts suitable for use therewith

Microphones and stands therefor; loudspeakers, whether or not mounted in their enclosures; headphones and earphones, whether or not combined with a microphone, and sets consisting of a microphone and one or more loudspeakers; audio-frequency electric amplifiers; electric sound amplifier sets:

For use in civil aircraft

Loudspeakers, whether or not mounted in their enclosures:

Multiple loudspeakers, mounted in the same enclosure:

Other

For use in civil aircraft

Headphones and earphones, whether or not combined with a microphone, and sets consisting of a microphone and one or more loudspeakers:

Other

For use in civil aircraft

Electric sound amplifier sets:

Other

Sound recording or sound reproducing apparatus:

Coin- or disc-operated record-players

With laser reading system

Music reproducers and automatic announcers, for use in certain types of aircraft

Turntables (record-decks)

Using magnetic, optical or semiconductor media:

Other

Video recording or reproducing apparatus, whether or not incorporating a video tuner:

Using tape of a width not exceeding 1,3 cm and allowing recording or reproduction at a tape speed not exceeding 50 mm per second

For use in civil aircraft

Other

Pick-up cartridges

Assemblies and sub-assemblies consisting of two or more parts or pieces fastened or joined together, for apparatus of subheading 8519 81, for use in civil aircraft

Discs, tapes, solid-state non-volatile storage devices, 'smart cards' and other media for the recording of sound or of other phenomena, whether or not recorded, including matrices and masters for the production of discs, but excluding products of chapter 37:

Cards incorporating a magnetic stripe

Magnetic tapes; magnetic discs:

Other

Optical media:

Discs for laser reading systems of a recording capacity not exceeding 900 megabytes, other than erasable

Other

Discs for laser reading systems:

Other

Semiconductor media:

Unrecorded

'smart cards'

Unrecorded

Other:

Other

Without drivers or control circuits:

Of organic light-emitting diodes (oled)

Other:

Of organic light-emitting diodes (oled)

Transmission apparatus for radio-broadcasting or television, whether or not incorporating reception apparatus or sound recording or reproducing apparatus; television cameras, digital cameras and video camera recorders:

Transmission apparatus incorporating reception apparatus

High-speed goods as specified in subheading note 1 to this chapter

Other, night vision goods as specified in subheading note 3 to this chapter

Radar apparatus, radio navigational aid apparatus and radio remote control apparatus:

For use in civil aircraft

Other:

Radio navigational receivers:

Other

For use in civil aircraft

Radio remote control apparatus:

Other

Radio-broadcast receivers capable of operating without an external source of power:

Other apparatus combined with sound recording or reproducing apparatus

Radio-broadcast receivers not capable of operating without an external source of power, of a kind used in motor vehicles:

Capable of receiving and decoding digital radio data system signals:

Other:

Other

With laser reading system

Of the cassette-type with an analogue and digital reading system

Other

Combined with sound recording or reproducing apparatus

Other

Cathode-ray tube monitors:

Other

Capable of directly connecting to and designed for use with an automatic data processing machine of heading 8471:

Other:

Other

Liquid crystal display colour video monitor assembly mounted on a frame, - excluding those combined with other apparatus, - comprising touch screen facilities, a printed circuit board with drive circuitry and power supply,used for permanent incorporation or permanent mounting into entertainment systems for vehicles

Other

Capable of directly connecting to and designed for use with an automatic data processing machine of heading 8471

Monochrome

Video projector consisting of three cathode-ray tubes each with a lens, for use in certain types of aircraft

Reception apparatus for television, whether or not incorporating radio-broadcast receivers or sound or video recording or reproducing apparatus:

Video tuners:

Apparatus with a microprocessor-based device incorporating a modem for gaining access to the internet, and having a function of interactive information exchange, capable of receiving television signals (so-called 'set-top boxes which have a communication function', including those incorporating a device performing a recording or reproducing function, provided that they retain the essential character of a set top box which has a communication function)

Other:

Other

Television projection equipment

Other:

With a screen of the liquid crystal display (lcd) technology

Other

Parts suitable for use solely or principally with the apparatus of headings 8524 to 8528:

Aerials:

Outside aerials for radio or television broadcast receivers

For use in civil aircraft

Other

For use in civil aircraft

Other

Organic light-emitting diode modules and organic light-emitting diode panels for the apparatus of subheadings 8528 72 or 8528 73

Of articles of subheadings 8524 11 00 and 8524 91 00

Other:

Electronic assemblies

Light-emitting diode (led) backlight modules, which are lighting sources that consist of one or more leds, and one or more connectors and are mounted on a printed circuit or other similar substrate, and other passive components, whether or not combined with optical components or protective diodes, and used as backlight illumination for liquid crystal displays (lcds)

For television cameras falling within subheadings 8525 81, 8525 82, 8525 83 and 8525 89 and apparatus of headings 8527 and 8528

Electrical signalling, safety or traffic control equipment for railways, tramways, roads, inland waterways, parking facilities, port installations or airfields (other than those of heading 8608):

Other equipment

Electric sound or visual signalling apparatus (for example, bells, sirens, indicator panels, burglar or fire alarms), other than those of heading 8512 or 8530:

Of a kind used for buildings

For use in civil aircraft

Indicator panels incorporating liquid crystal devices (lcd) or light-emitting diodes (led):

For use in civil aircraft

Incorporating liquid crystal devices (lcd):

For use in civil aircraft

Other:

Other

Bells, buzzers, door chimes and similar:

Other

Parts

Fixed capacitors designed for use in 50/60 hz circuits and having a reactive power handling capacity of not less than 0,5 kvar (power capacitors)

Tantalum

Ceramic dielectric, single layer

Dielectric of paper or plastics

Variable or adjustable (pre-set) capacitors

Electrical resistors (including rheostats and potentiometers), other than heating resistors:

Other fixed resistors:

Other

For a power handling capacity not exceeding 20 w

Other variable resistors, including rheostats and potentiometers:

Other

Printed circuits:

Multilayer circuits

With other passive elements

Fuses:

Other

For a voltage of less than 72,5 kv:

Other

For use in certain types of aircraft

Isolating switches and make-and-break switches:

For use in certain types of aircraft

Other:

Other

For use in certain types of aircraft

Other:

Other

Fuses:

For use in certain types of aircraft

For a current exceeding 10 a but not exceeding 63 a:

Other

For use in certain types of aircraft

Automatic circuit breakers:

For use in certain types of aircraft

For a current exceeding 63 a:

Other

For a current not exceeding 16 a:

Other

For use in certain types of aircraft

For a current exceeding 125 a:

Other

For a voltage not exceeding 60 v:

For use in certain types of aircraft

Other

For use in certain types of aircraft

Power relay with:-electromechanical and/or electromagnetical switching function,-a load current of 3 a or more but not more than 16 a,-a coil voltage of 5 v or more but not more than 24 v, and-a distance between the connector pins of the load circuit not more than 15,6 mm

Other:

Other:

Relay in the shape of a cube with: -a coil operating voltage of 12 vdc (voltage direct current) or more, but not more than 24 vdc (voltage direct current), -a contact current carrying capacity of 5a or more, but not more than 15a, -a contact voltage of 80 vac (voltage alternating current) or more, but not more than 270 vac (voltage alternating current), -outer dimensions of 19 mm (± 0,4 mm) x 15,2 mm (± 0,4 mm) x 15,5 mm (± 0,4 mm),for use in the production of control board of household appliances

Other switches:

Electronic switches, including temperature protected electronic switches, consisting of a transistor and a logic chip (chip-on-chip technology)

Other:

Push-button switches:

Other

For use in certain types of aircraft

Other:

Other

For use in certain types of aircraft

Lamp holders, plugs and sockets:

Edison lamp holders:

Other

For use in certain types of aircraft

Other:

For printed circuits

For use in certain types of aircraft

Modular socket or plug for local area networks, whether or not combined with other sockets, integrating at least: - a pulse transformer, including a wide-band ferrite core, - a common mode coil, - a resistor, - a capacitor,for use in the manufacture of products falling within headings 8521 or 8528

Universal serial bus (usb) socket or plug in a single or multiple form for connecting with other usb devices, for use in the manufacture of goods falling within headings 8521 or 8528

High-definition multimedia interface (hdmi) type socket or plug, built into a plastic or metal housing, with 19 pins or 20 pins in 2 rows, for use in the manufacture of products falling within headings 8521 or 8528

Connectors for optical fibres, optical fibre bundles or cables:

Other:

Other

Prefabricated elements for electrical circuits

Battery clamps of a kind used for motor vehicles of heading 8702, 8703, 8704, or 8711

Boards, panels, consoles, desks, cabinets and other bases, equipped with two or more apparatus of heading 8535 or 8536, for electric control or the distribution of electricity, including those incorporating instruments or apparatus of chapter 90, and numerical control apparatus, other than switching apparatus of heading 8517:

Numerical control panels with built-in automatic data-processing machine:

Other

Programmable memory controllers:

Other:

A control unit being a printed circuit board with at least: -a microprocessor, -a programmable memory, -a single connector, -a ppe housing, -a supply of voltage of 220 v or more but not more than 240 v, -a length of 200 mm or more but not more than 210 mm, -a width of 70 mm or more but not more than 100 mm, and -a height of 20 mm or more but not more than 30 mm,for use in the manufacture of dishwashers

Electronic suspension control unit with: -a printed circuit board in plastic housing, -lin and can buses, -a programmable memory, -a signal processor, -an operating direct current voltage of 9 v or more but not more than 16 v, -at least one connector, -whether or not with metal mounting bracket,for use in the manufacture of goods of chapter 87

Fuse control module in a plastic housing with mounting brackets comprising: - sockets with or without fuses, - connecting ports, - a printed circuit board with embedded microprocessor, micro switch and relayof a kind used in the manufacture of goods of chapter 87

Electronic control units for controlling inter axle torque transferring in all-wheel drive vehicles including:-a printed circuit board with programmable memory controller,-one single connector, and-working at 12 v

Electronic control units able to control automatic continuous variable transmission for passenger vehicles including:-a printed circuit board with programmable memory controller,-a metallic housing,-one single connector,-working at 12v

Programmable motor memory controller for a voltage not exceeding 1000 v comprising at least - a printed circuit with active and passive components, - an aluminium housing, and - multiple connectors

Other

Other:

Other:

Lever for control module under the steering wheel: -with several single or multi-positional electrical switches (push-button, rotary or other), -equipped with printed circuit boards and/or electrical cables, -for a voltage of 9 v or more but not more than 16 v,of a kind used in the manufacture of motor vehicles of chapter 87

Control panel with switches for mirror, windows and other functions in vehicles, with: -a total length of 144 mm or more but not more than 150 mm, -a distance between intended screwing interface center points of 31 mm or more but not more than 31,50 mm, and -electric components inside the panel with integrated leds,for use in the manufacture of automotive components

Switch for motor vehicle seat regulation with a memory function, with: -three single switches, -a five-pin connector, -for a voltage of 9 vdc or more but not more than 16 vdc, and -electric components inside the panel with integrated led,for use in the manufacture of automotive components

Memory switch control panel for seat and lock switch for vehicles with: -a width of 70,2 mm or more but not more than 70,5 mm, -parallel ribs with a distance between them of 2,6 mm or more but not more than 2,8 mm on the rear side, -a 5 pines connector, and -electric components inside the panel with integrated led,for use in the manufacture of automotive components

A control unit being a printed circuit board with at least: -a microprocessor, -two or more connectors but not more than four, -modified resins, -a length of 180 mm or more but not more than 250 mm, -a width of 130 mm or more but not more than 200 mm, and -a height of 40 mm or more but not more than 60 mm,for use in the manufacture of washing machines

A control unit being a printed circuit board with at least: -a microprocessor, -eight connectors or more but not more than eleven, -a supply voltage of 215 v or more but not more than 245 v, -a housing of pa6-mr30, -with or without a transformer, -with or without a high power relay, -with or without insulated-gate bipolar transistor, -a length of 280 mm or more but not more than 345 mm, -a width of 400 mm or more but not more than 470 mm, -a height of 28 mm or more but not more than 45 mm, for use in the manufacture of induction stoves

A control unit being a printed circuit board with at least: -a microprocessor, -two connectors, -a supply voltage of 215 v or more but not more than 245 v, -no housing, -a length of 100 mm or more but not more than 120 mm, -a width of 40 mm or more but not more than 50 mm, and -a height of 20 mm or more but not more than 30 mm,for use in the manufacture of refrigerators

Propulsion control system with at least: -a dc/ac inverter, -a power of 190 kw or more but not more than 220 kw, -a high voltage circuits with ac and dc interfaces for connecting a traction motor, generator and energy storage system, -an integral control of all drive motor and generator traction system functions, -a can communications interface with system control unit, -a liquid cooled system, -a length of 300 mm or more but not more than 950 mm, -a width of 350 mm or more but not more than 600 mm, -a height of 200 mm or more but not more than 350 mm, -a weight of 40 kg or more but not more than 90 kg​

Electronic control units for a voltage of 12 v, for use in the manufacture of vehicle mounted temperature control systems

Other

For a voltage exceeding 1 000 v but not exceeding 72,5 kv:

Other

For use in certain types of aircraft

Parts suitable for use solely or principally with the apparatus of heading 8535, 8536 or 8537:

Other:

Electronic assemblies

Other:

For use in certain types of aircraft

Interior antenna for a car door locking system, comprising: - an antenna module in a plastic housing,- whether or not a connection cable with a plug,- whether or not a connector,- at least one mounting bracket,- whether or not pcb including integrated circuits, diodes and transistors, for use in the manufacture of goods of chapter 87

Other:

Other:

Polycarbonate control interface buttons for steering pad switches coated on the outside with scratch resistant paint, in immediate packages of 500 pieces or more

Front control panel, in the form of a plastic box, with light guides, rotary switches, pressure switches and buttons switches, or other type of switches, without any electrical component, of a kind used in the dashboard of motor vehicles of chapter 87

Other

Sealed beam lamp units:

Other

Tungsten halogen:

Other, for a voltage:

Lamps for lighting, for use in certain types of aircraft

Not exceeding 100 v:

Other

Reflector lamps:

Other

Lamps for lighting, for use in certain types of aircraft

Other:

Other, for a voltage:

Lamps for lighting, for use in certain types of aircraft

Not exceeding 100 v:

Other

Fluorescent, hot cathode:

Lamps for lighting, for use in certain types of aircraft

Other:

Other

Mercury or sodium vapour lamps

Lamps for lighting, for use in certain types of aircraft

Other:

Other:

Other

Arc lamps

Light-emitting diode (led) light sources:

Light-emitting diode (led) lamps

Lamp bases

Thermionic, cold cathode or photocathode valves and tubes (for example, vacuum or vapour or gas filled valves and tubes, mercury arc rectifying valves and tubes, cathode ray tubes, television camera tubes):

Colour:

Other

For use in certain types of aircraft

Television camera tubes; image converters and intensifiers; other photocathode tubes:

For use in certain types of aircraft

Other:

Other:

Other

For use in certain types of aircraft

Other cathode ray tubes:

Other

Magnetrons:

Continuous wave magnetron with:- a fixed frequency of 2460mhz,- a packaged magnet,- a probe output,- an output power of 960 or more but not more than 1500w

Other:

Other

Receiver or amplifier valves and tubes:

Other

For use in certain types of aircraft

Displays in the form of a tube consisting of a glass housing mounted on a board the dimensions of which do not exceed 300 mm × 350 mm excluding leads.. The tube contains one or more rows of characters or lines arranged in rows, each character or line consisting of fluorescent or phosphorescent elements.. These elements are mounted on a metallised base which is covered with fluorescent substances or phosphorescent salts which give off light when bombarded with electrons

Other

Of cathode ray tubes:

Thermionic electron source (emitter point) of lanthanum hexaboride (cas rn 12008-21-8) or cerium hexaboride (cas rn 12008-02-5), with electric connectors- with or without a metal housing,- with or without a graphite carbon shield mounted in a mini-vogel type system,- with or without separate pyrolytic carbon blocks used as heating elements, and - a cathode temperature of less than 1 800 k at a filament current of 1,26 a

Other:

Other

Diodes, other than photosensitive or light-emitting diodes (led)

With a dissipation rate of less than 1 w

Thyristors, diacs and triacs, other than photosensitive devices

Light-emitting diodes (led)

Photovoltaic cells assembled in modules or made up into panels

Other semiconductor devices:

Other

Parts

Electronic integrated circuits:

Goods specified in note 12(b)(3 and 4) to this chapter:

Other

Memories:

Multi-component integrated circuits (mcos)

Other:

With a storage capacity not exceeding 512 mbits

Static random-access memories (s-rams), including cache random-access memories (cache-rams)

Electrically erasable, programmable, read only memories (e2proms), including flash e2proms:

With a storage capacity not exceeding 512 mbits

Other

Amplifiers:

Other

Goods specified in note 12(b)(3 and 4) to this chapter:

Other

Parts

Particle accelerators

Machines and apparatus for electroplating, electrolysis or electrophoresis:

Other

Other machines and apparatus:

Microwave amplifiers

Digital flight-data recorders

Digital signal processing apparatus capable of connecting to a wired or wireless network for the mixing of sound

Plasma cleaner machines that remove organic contaminants from electron microscopy specimens and specimen holders

Electrical machines with translation or dictionary functions

Sunbeds, sunlamps and similar suntanning equipment

Other:

Engine pressure indicators, for use in certain types of aircraft

Electronic control unit of the 360-degree vehicle situation display system with: -an operating dc voltage of 9 v or more but not more than 16 v, -a videoprocessor, -a signal processor, -one or more connectors, and -whether or not with a metal mounting bracket, for use in the manufacture of goods of chapter 87

High-frequency amplifier comprising one or more integrated circuits and one or more discrete capacitor chips, whether or not with ipd (integrated passive devices) on a metal flange in a housing

Piezo-electric crystal oscillator with a fixed frequency, within a frequency range of 1,8 mhz to 67 mhz, contained in a housing

Temperature compensated oscillator, comprising a printed circuit on which are mounted at least a piezo-electric crystal and an adjustable capacitor, contained in a housing

An electronic sound generator, creating an analog signal for a device producing the sound of an engine, containing:- a printed circuit board with a microprocessor and a sound amplifier,- a connector,- a plastic housing,- with or without a metal holder,for use in the manufacture of goods of chapter 87

Parts

Winding wire:

Lacquered or enamelled

Other

Antenna connecting cable for the transmission of radio (am/fm) signal and whether or not gps signal, containing: - a coaxial cable, - two or more connectors, and - 3 or more plastic clips for attachment to the dashboardof a kind used in the manufacture of goods of chapter 87

Ignition wiring sets and other wiring sets of a kind used in vehicles, aircraft or ships:

Other:

Wire harness or cable for steering system:- for an operatingvoltage of 12v, - with connectors on both sides,- whether or not with anchor clamps of plastic for mounting on a motorvehicle steering box

Connecting five-core cable with connectors for coupling the temperature sensor and the exhaust manifold pressure difference sensor to the common connector for use in the manufacture of compression-ignition internal combustion piston engines of passenger cars

Six core cable connecting the oil pressure sensor and the differential controller of vehicles: -with pvc-coating, -with three multiple connectors, and -with or without plastic clip,for use in the manufacture of goods of chapter 87

Wiring harness to connect the integrated battery system with the car's control systems, containing: -an input waterproof connector, -four or more output connectors, -two or more plastic clips for attachmentfor use in the production of rechargeable batteries for hybrid and electric vehicles

Other

Fitted with connectors:

Other:

Pvc isolated flexible eight wire cable with: - a length of not more than 2100 mm - an operating voltage of 5v or more, but not more than 35v - a temperature resistance of not more than 80°c - either an over-moulded 7 pin round 270° din male connector, a 6 pin a1101 male connector or a 8 pin a1001 male connector on one end and - at least two stripped and tinned wires on the other end - whether or not with mounted rubber pad with integrated strain relief

Pvc isolated flexible cable with: - a length of not more than 1800 mm - an operating voltage of 5v or more, but not more than 35v - a heat resistance of not more than 80°c - an over-moulded 8 pin minifit male connector on one end - either a 6 pin minifit socket or two over-moulded amp connectors on the other end - a over-moulded resistor inside the connector and - a moulded strain relief on the cable - whether or not with a over-moulded diode inside a connector

Wire harness or cable for steering system:- for an operating voltage of 12v, - with connectors on both sides,- whether or not with anchor clamps of plastic for mounting on a motorvehicle steering box

Four-core connecting cable containing two female connectors for the transmission of digital signals from navigation and audio systems to a usb connector, for use in the manufacture of goods of chapter 87

12-wire connecting cable containing two connectors - of a voltage of 5 v, - with a length of not more than 300 mmfor use in the manufacture of goods of chapter 87

Other:

Other:

Other:

Elastomeric connector, of rubber or silicone, consisting of one or more conductor elements

Electric conductors: - of a voltage of not more than 80 v, - of a platinum-iridium-alloy, - coated with poly(tetrafluoroethylene), - without connectors,for use in the manufacture of hearing aids, implants and speech processors

For a voltage exceeding 80 v but less than 1 000 v:

Other

Other electric conductors, for a voltage exceeding 1 000 v:

Specially designed connector for solar power system: -as 1-part system with 1 plastic housing with 1 or more but not more than 4 diodes and 2 insulated copper cables with connectors or -as 3-part system with one plastic housing with 1 or more but not more than 4 diodes and 2 plastic housings with insulated copper cables with connectors, -with a current for the diodes of 3 a or more but not more of 50 a, -with a cable length of not more than 1 500 mm, -with a maximum rated voltage of 1 500 v

With other conductors

Single mode optical fibre cables, made up of one or more individually sheathed fibres, with protective casing, whether or not containing electric conductors; excluding cables in which all the optical fibres are individually fitted with operational connectors at one or both extremities and plastic insulated cables for submarine use containing a copper or aluminium conductor in which fibres are contained in metal module(s)