HS-koodid - 72: IRON AND STEEL

7201
Toormalm ja peegelmalm kangide, plokkide või muude esmasvormidena:
7201.A
Non-alloy pig iron containing by weight 0.5% or less of phosphorus
7201.A.A
Containing by weight not less than 0.4% of manganese
7201.A.A.A
Containing by weight 1% or less of silicon
7201.1011.10
Pig iron ingots with a length of not more than 350 mm, a width of not more than 150 mm, a height of not more than 150 mm
7201.1011.90
Muud
7201.1019.00
Containing by weight more than 1% of silicon
7201.A.B
Containing by weight not less than 0.1% but less than 0.4% of manganese
7201.1030.10
Pig iron ingots with a length of not more than 350 mm, a width of not more than 150 mm, a height of not more than 150 mm, containing by weight not more than 1% of silicon
7201.1030.90
Muud
7201.1090.00
Containing by weight less than 0.1% of manganese
7201.2000.00
Non-alloy pig iron containing by weight more than 0.5% of phosphorus
7201.B
Legeeritud toormalm; peegelmalm:
7201.5010.00
Alloy pig iron containing by weight not less than 0.3% but not more than 1% of titanium and not less than 0.5% but not more than 1% of vanadium
7201.5090.00
Muud
7201
Toormalm ja peegelmalm kangide, plokkide või muude esmasvormidena:
7201.C
Non-alloy pig iron containing by weight 0.5% or less of phosphorus
7201.C.A
Containing by weight not less than 0.4% of manganese
7201.C.A.A
Containing by weight 1% or less of silicon
7201.1011.10
Pig iron ingots with a length of not more than 350 mm, a width of not more than 150 mm, a height of not more than 150 mm
7201.1011.90
Muud
7201.1019.00
Containing by weight more than 1% of silicon
7201.C.B
Containing by weight not less than 0.1% but less than 0.4% of manganese
7201.1030.10
Pig iron ingots with a length of not more than 350 mm, a width of not more than 150 mm, a height of not more than 150 mm, containing by weight not more than 1% of silicon
7201.1030.90
Muud
7201.1090.00
Containing by weight less than 0.1% of manganese
7201.2000.00
Non-alloy pig iron containing by weight more than 0.5% of phosphorus
7201.D
Legeeritud toormalm; peegelmalm:
7201.5010.00
Alloy pig iron containing by weight not less than 0.3% but not more than 1% of titanium and not less than 0.5% but not more than 1% of vanadium
7201.5090.00
Muud
7202
Ferrosulamid:
7202.A
Ferromangaan:
7202.A.A
Containing by weight more than 2% of carbon
7202.1120.00
With a granulometry not exceeding 5 mm and a manganese content by weight exceeding 65%
7202.1180.00
Muud
7202.1900.00
Muud
7202.B
Ferrosiliitsium:
7202.2100.00
Containing by weight more than 55% of silicon
7202.B.A
Muud:
7202.2910.00
Containing by weight 4% or more but not more than 10% of magnesium
7202.2990.00
Muud
7202.3000.00
Ferrosilikomangaan
7202.C
Ferrokroom:
7202.C.A
Containing by weight more than 4% of carbon
7202.4110.00
Containing by weight more than 4% but not more than 6% of carbon
7202.4190.00
Containing by weight more than 6% of carbon
7202.C.B
Muud:
7202.C.B.A
Containing by weight not more than 0.05% of carbon
7202.4910.20
Containing by weight more than 30% but not more than 90% of chromium (super-refined ferrochromium)
7202.4910.90
Muud
7202.C.B.B
Containing by weight more than 0.05% but not more than 0.5% of carbon
7202.C.B.B.A
With a chromium content by weight of 30% and more
7202.4950.11
Containing by weight not more than 0.1% of carbon and more than 30% but not more than 90% of chromium (super-refined ferrochromium)
7202.4950.19
Muud
7202.4950.90
Muud
7202.4990.00
Containing by weight more than 0.5% but not more than 4% of carbon
7202.5000.00
Ferrosilikokroom
7202.6000.00
Ferronikkel
7202.7000.00
Ferromolübdeen
7202.8000.00
Ferrovolfram ja ferrosilikovolfram
7202.D
Muud:
7202.9100.00
Ferrotitaan ja ferrosilikotitaan
7202.9200.00
Ferrovanaadium
7202.9300.00
Ferronioobium
7202.D.A
Muud:
7202.9910.00
Ferro-phosphorus
7202.9930.00
Ferro-silico-magnesium
7202.D.A.A
Muud:
7202.9980.10
Ferro-dysprosium, containing by weight:- 78% or more of dysprosium and- 18% or more but no more than 22% of iron
7202.9980.30
Calcium-silicon - an alloy that contains by weight 16% or more of calcium, 45% or more of silicon, not less than 4% but less than 14% of iron and not more than 10% of any other element; whether or not presented in bulk, packaged in bags or in steel drums, enclosed in steel sheets (or cored wire), or otherwise presented
7202.9980.90
Muud
7203
Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99.94%, in lumps, pellets or similar forms
7203.1000.00
Rauamaagi otsesel redutseerimisel saadud raud
7203.9000.00
Muud
7204
Malmi ja terase jäätmed ja jäägid; praagitud raua või terase valuplokid ümbersulatamiseks:
7204.1000.00
Malmijäätmed ja -jäägid
7204.A
Legeerterase jäätmed ja jäägid:
7204.A.A
Roostevabast terasest:
7204.A.A.A
Containing by weight 8% or more of nickel
7204.2110.10
Scrap
7204.2110.90
Muud
7204.A.A.B
Muud:
7204.2190.10
Scrap
7204.2190.90
Muud
7204.A.B
Muud:
7204.2900.10
Scrap
7204.2900.90
Muud
7204.B
Tinatatud malmi või terase jäätmed ja jäägid:
7204.3000.10
Scrap
7204.3000.90
Muud
7204.C
Muud jäätmed ja jäägid:
7204.C.A
Trei-, höövli- ja raielaastud, freesimisjäätmed, saagimisjäätmed, viilmed, lõikmed ning stantsimisjäätmed, pakettidena või mitte:
7204.C.A.A
Turnings, shavings, chips, milling waste, sawdust and filings
7204.4110.10
Scrap
7204.4110.90
Muud
7204.C.A.B
Trimmings and stampings
7204.C.A.B.A
In bundles
7204.4191.10
Scrap
7204.4191.90
Muud
7204.C.A.B.B
Muud:
7204.4199.10
Scrap
7204.4199.90
Muud
7204.C.B
Muud:
7204.C.B.A
Fragmentised (shredded)
7204.4910.10
Scrap
7204.4910.90
Muud
7204.C.B.B
Muud:
7204.C.B.B.A
In bundles
7204.4930.10
Scrap
7204.4930.90
Muud
7204.C.B.B.B
Muud:
7204.4990.10
Scrap
7204.4990.90
Muud
7204.5000.00
Praagitud valuplokid ümbersulatamiseks
7205
Graanulid ja pulber toormalmist, peegelmalmist, rauast või terasest:
7205.1000.00
Graanulid
7205.A
Pulber:
7205.2100.00
Legeerterasest
7205.2900.00
Muud
7206
Raud ja legeerimata teras valuplokkidena või muude esmasvormidena (v.. A rubriigi 7203 raud):
7206.1000.00
Valuplokid
7206.9000.00
Muud
7206
Raud ja legeerimata teras valuplokkidena või muude esmasvormidena (v.. A rubriigi 7203 raud):
7206.1000.00
Valuplokid
7206.9000.00
Muud
7207
Pooltooted rauast või legeerimata terasest:
7207.A
Containing by weight less than 0.25% of carbon
7207.A.A
Täisnurkse (k.. A ruudukujulise) ristlõikega, laiusega alla kahekordse paksuse:
7207.A.A.A
Rolled or obtained by continuous casting
7207.1111.00
Of free-cutting steel
7207.A.A.A.A
Muud:
7207.1114.00
Of a thickness not exceeding 130 mm
7207.1116.00
Of a thickness exceeding 130 mm
7207.1190.00
Sepistatud
7207.A.B
Muud täisnurkse (v.. A ruudukujulise) ristlõikega:
7207.1210.00
Rolled or obtained by continuous casting
7207.1290.00
Sepistatud
7207.A.C
Muud:
7207.A.C.A
Of circular or polygonal cross-section
7207.1912.00
Rolled or obtained by continuous casting
7207.1919.00
Sepistatud
7207.A.C.B
Muud:
7207.1980.10
Blanks for angles, shapes and sections, rolled or obtained by continuous casting
7207.1980.90
Muud
7207.B
Containing by weight 0.25% or more of carbon
7207.B.A
Täisnurkse (k.. A ruudukujulise) ristlõikega, laiusega alla kahekordse paksuse:
7207.B.A.A
Rolled or obtained by continuous casting
7207.2011.00
Of free-cutting steel
7207.B.A.A.A
Other, containing by weight
7207.2015.00
0.25% or more but less than 0.6% of carbon
7207.2017.00
0.6% or more of carbon
7207.2019.00
Sepistatud
7207.B.B
Muud täisnurkse (v.. A ruudukujulise) ristlõikega:
7207.2032.00
Rolled or obtained by continuous casting
7207.2039.00
Sepistatud
7207.B.C
Of circular or polygonal cross-section
7207.2052.00
Rolled or obtained by continuous casting
7207.2059.00
Sepistatud
7207.B.D
Muud:
7207.2080.10
Blanks for angles, shapes and sections, rolled or obtained by continuous casting
7207.2080.90
Muud
7208
Lehtvaltstooted rauast või legeerimata terasest, laiusega vähemalt 600 mm, kuumvaltsitud, plakeerimata, pindamata ja muul viisil katmata:
7208.1000.00
Rullides, kuumvaltsitud, kuid edasi töötlemata, reljeefse mustriga
7208.A
Muud, rullides, kuumvaltsitud, kuid edasi töötlemata, söövitatud:
7208.2500.00
Paksusega vähemalt 4,75 mm
7208.2600.00
Paksusega vähemalt 3 mm, kuid alla 4,75 mm
7208.2700.00
Paksusega alla 3 mm
7208.B
Muud, rullides, kuumvaltsitud, kuid edasi töötlemata:
7208.3600.00
Paksusega üle 10 mm
7208.B.A
Paksusega vähemalt 4,75 mm, kuid mitte üle 10 mm:
7208.3700.10
Intended for re-rolling
7208.3700.90
Muud
7208.B.B
Paksusega vähemalt 3 mm, kuid alla 4,75 mm:
7208.3800.10
Intended for re-rolling
7208.3800.90
Muud
7208.B.C
Paksusega alla 3 mm:
7208.3900.10
Intended for re-rolling
7208.3900.90
Muud
7208.C
Mitte rullides, kuumvaltsitud, kuid edasi töötlemata, reljeefse mustriga:
7208.4000.10
Of a thickness of 2 mm or more
7208.4000.90
Of a thickness of less than 2 mm
7208.D
Muud, mitte rullides, kuumvaltsitud, kuid edasi töötlemata:
7208.D.A
Paksusega üle 10 mm:
7208.D.A.A
Of a thickness exceeding 15 mm
7208.5120.10
Of non-alloy steel, excluding tool steel
7208.5120.90
Muud
7208.D.A.B
Of a thickness exceeding 10 mm but not exceeding 15 mm, of a width of
7208.D.A.B.A
2 050 mm or more
7208.5191.10
Of non-alloy steel, excluding tool steel
7208.5191.90
Muud
7208.D.A.B.B
Less than 2 050 mm
7208.5198.10
Of non-alloy steel, excluding tool steel
7208.5198.90
Muud
7208.D.B
Paksusega vähemalt 4,75 mm, kuid mitte üle 10 mm:
7208.5210.00
Rolled on four faces or in a closed box pass, of a width not exceeding 1 250 mm
7208.D.B.A
Other, of a width of
7208.D.B.A.A
2 050 mm or more
7208.5291.10
Of non-alloy steel, excluding tool steel
7208.5291.90
Muud
7208.5299.00
Less than 2 050 mm
7208.D.C
Paksusega vähemalt 3 mm, kuid alla 4,75 mm:
7208.5310.00
Rolled on four faces or in a closed box pass, of a width not exceeding 1 250 mm and of a thickness of 4 mm or more
7208.5390.00
Muud
7208.5400.00
Paksusega alla 3 mm
7208.E
Muud:
7208.E.A
Perforated
7208.9020.10
Of non-alloy steel, excluding tool steel, of a thickness exceeding 10 mm or of a thickness of 4.75 mm or more but not exceeding 10 mm and of a width of 2 050 mm or more
7208.9020.90
Muud
7208.E.B
Muud:
7208.9080.10
Not further worked than surface-treated or simply cut into shapes other than rectangular (including square)
7208.9080.20
Of non-alloy steel, excluding tool steel, of a thickness exceeding 10 mm or of a thickness of 4.75 mm or more but not exceeding 10 mm and of a width of 2 050 mm or more
7208.9080.90
Muud
7209
Lehtvaltstooted rauast või legeerimata terasest, laiusega vähemalt 600 mm, külmvaltsitud, plakeerimata, pindamata või muul viisil katmata:
7209.A
Rullides, külmvaltsitud, kuid edasi töötlemata:
7209.A.A
Paksusega vähemalt 3 mm:
7209.1500.10
'electrical'
7209.1500.90
Muud
7209.A.B
Paksusega üle 1 mm, kuid alla 3 mm:
7209.1610.00
'electrical'
7209.1690.00
Muud
7209.A.C
Paksusega vähemalt 0,5 mm, kuid mitte üle 1 mm:
7209.1710.00
'electrical'
7209.1790.00
Muud
7209.A.D
Paksusega alla 0,5 mm:
7209.1810.00
'electrical'
7209.A.D.A
Muud:
7209.1891.00
Of a thickness of 0.35 mm or more but less than 0.5 mm
7209.A.D.A.A
Of a thickness of less than 0.35 mm
7209.1899.10
Annealed (known as 'black plates')
7209.1899.90
Muud
7209.B
Mitte rullides, külmvaltsitud, kuid edasi töötlemata:
7209.B.A
Paksusega vähemalt 3 mm:
7209.2500.10
'electrical'
7209.2500.90
Muud
7209.B.B
Paksusega üle 1 mm, kuid alla 3 mm:
7209.2610.00
'electrical'
7209.2690.00
Muud
7209.B.C
Paksusega vähemalt 0,5 mm, kuid mitte üle 1 mm:
7209.2710.00
'electrical'
7209.2790.00
Muud
7209.B.D
Paksusega alla 0,5 mm:
7209.2810.00
'electrical'
7209.2890.00
Muud
7209.C
Muud:
7209.9020.00
Perforated
7209.C.A
Muud:
7209.9080.10
Not further worked than surface-treated or simply cut into shapes other than rectangular (including square)
7209.9080.90
Muud
7210
Lehtvaltstooted rauast ja legeerimata terasest, laiusega vähemalt 600 mm, plakeeritud, pinnatud või muul viisil kaetud:
7210.A
Tinaga pinnatud või kaetud:
7210.A.A
Paksusega vähemalt 0,5 mm:
7210.1100.10
Not further worked than surface-treated or simply cut into shapes other than rectangular (including square)
7210.1100.90
Muud
7210.A.B
Paksusega alla 0,5 mm:
7210.A.B.A
Tinplate
7210.1220.10
Not further worked than surface-treated or simply cut into shapes other than rectangular (including square)
7210.1220.90
Muud
7210.A.B.B
Muud:
7210.1280.10
Not further worked than surface-treated or simply cut into shapes other than rectangular (including square)
7210.1280.90
Muud
7210.B
Pliiga (sh plii ja tina sulamiga) pinnatud või kaetud:
7210.2000.10
Not further worked than surface-treated or simply cut into shapes other than rectangular (including square)
7210.2000.90
Muud
7210.C
Tsingiga elektrolüütiliselt pinnatud või kaetud:
7210.3000.10
Not further worked than surface-treated or simply cut into shapes other than rectangular (including square)
7210.3000.90
Muud
7210.D
Tsingiga muul viisil pinnatud või kaetud:
7210.D.A
Gofreeritud:
7210.4100.20
Aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips
7210.4100.30
Plated or coated by hot dip galvanisation, whether or not alloyed with silicon; chemically passivated; with or without any additional surface treatment such as oiling or sealing; containing by weight: not more than 0.5% of carbon, not more than 1.1% of aluminium, not more than 0.12% of niobium, not more than 0.17% of titanium and not more than 0.15% of vanadium; presented in coils, cut-to-length sheets and narrow strips
7210.4100.80
Muud
7210.D.B
Muud:
7210.4900.20
Aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips
7210.4900.30
Plated or coated by hot dip galvanisation, whether or not alloyed with silicon; chemically passivated; with or without any additional surface treatment such as oiling or sealing; containing by weight: not more than 0.5% of carbon, not more than 1.1% of aluminium, not more than 0.12% of niobium, not more than 0.17% of titanium and not more than 0.15% of vanadium; presented in coils, cut-to-length sheets and narrow strips
7210.4900.80
Muud
7210.E
Kroomoksiididega või kroomi ja kroomoksiididega pinnatud või kaetud:
7210.5000.10
Not further worked than surface-treated or simply cut into shapes other than rectangular (including square)
7210.5000.90
Muud
7210.F
Alumiiniumiga pinnatud või kaetud:
7210.F.A
Alumiiniumi-tsingisulamiga pinnatud või kaetud:
7210.6100.20
Aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips
7210.6100.30
Plated or coated by hot dip galvanisation, whether or not alloyed with silicon; chemically passivated; with or without any additional surface treatment such as oiling or sealing; containing by weight: not more than 0.5% of carbon, not more than 1.1% of aluminium, not more than 0.12% of niobium, not more than 0.17% of titanium and not more than 0.15% of vanadium; presented in coils, cut-to-length sheets and narrow strips
7210.6100.80
Muud
7210.F.B
Muud:
7210.6900.20
Aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips
7210.6900.30
Plated or coated by hot dip galvanisation with aluminium and/or magnesium, whether or not alloyed with silicon; chemically passivated; with or without any additional surface treatment such as oiling or sealing; containing by weight: not more than 0.5% of carbon, not more than 1.1% of aluminium, not more than 0.12% of niobium, not more than 0.17% of titanium and not more than 0.15% of vanadium; presented in coils, cut-to-length sheets and narrow strips
7210.6900.80
Muud
7210.G
Värvitud, lakitud või plastiga kaetud:
7210.G.A
Tinplate, varnished; products, plated or coated with chromium oxides or with chromium and chromium oxides, varnished
7210.7010.15
Tinplate
7210.7010.91
Muud
7210.G.B
Muud:
7210.G.B.A
Not further worked than surface-treated or simply cut into shapes other than rectangular (including square)
7210.7080.11
Of non-alloy steel, painted, varnished or coated with plastics on at least one side, excluding products with a final coating of zinc-dust (a zinc-rich paint, containing by weight 70% or more of zinc) and excluding products with a substrate with a metallic coating of chromium or tin
7210.G.B.A.A
Muud:
7210.7080.20
Coated or plated with tin
7210.7080.25
Muud
7210.G.B.B
Muud:
7210.7080.91
Of non-alloy steel, painted, varnished or coated with plastics on at least one side, excluding so-called 'sandwich panels' of a kind used for building applications and consisting of two outer metal sheets with a stabilising core of insulation material sandwiched between them, and excluding those products with a final coating of zinc-dust (a zinc-rich paint, containing by weight 70% or more of zinc) and excluding products with a substrate with a metallic coating of chromium or tin
7210.G.B.B.A
Muud:
7210.7080.92
Coated or plated with tin
7210.7080.95
Muud
7210.H
Muud:
7210.9030.00
Plakeeritud
7210.H.A
Tinned and printed
7210.9040.10
Not further worked than surface-treated, including cladding, or simply cut into shapes other than rectangular (including square)
7210.9040.90
Muud
7210.H.B
Muud:
7210.9080.20
Coated or plated with tin, whether or not coated with a plastic material and/or varnished
7210.H.B.A
Muud:
7210.9080.91
Not further worked than surface-treated, including cladding, or simply cut into shapes other than rectangular (including square)
7210.9080.92
Plated or coated by hot dip galvanisation with magnesium or magnesium-zinc alloys, whether or not alloyed with silicon; chemically passivated; with or without any additional surface treatment such as oiling or sealing; containing by weight: not more than 0.5% of carbon, not more than 1.1% of aluminium, not more than 0.12% of niobium, not more than 0.17% of titanium and not more than 0.15% of vanadium; presented in coils, cut-to-length sheets and narrow strips
7210.9080.99
Muud
7211
Lehtvaltstooted rauast ja legeerimata terasest, laiusega alla 600 mm, plakeerimata, pindamata või muul viisil katmata:
7211.A
Not further worked than hot-rolled
7211.A.A
Valtsitud neljalt küljelt või kinnises kaliibris, laiusega üle 150 mm, paksusega vähemalt 4 mm, mitte rullides, reljeefse mustrita:
7211.1300.11
Of a width not exceeding 350 mm and of a thickness of 50 mm or more
7211.1300.19
Muud
7211.A.B
Muud, paksusega vähemalt 4,75 mm:
7211.1400.10
Of a width exceeding 500 mm
7211.A.B.A
Of a width not exceeding 500 mm
7211.1400.91
Of a width not exceeding 350 mm and of a thickness of 50 mm or more
7211.1400.95
Muud
7211.A.C
Muud:
7211.1900.10
Of a width exceeding 500 mm
7211.A.C.A
Of a width not exceeding 500 mm
7211.1900.91
Of a width not exceeding 350 mm and of a thickness of 50 mm or more
7211.1900.95
Muud
7211.B
Külmvaltsitud, edasi töötlemata:
7211.B.A
Containing by weight less than 0.25% of carbon
7211.B.A.A
'electrical'
7211.2320.10
Of a width exceeding 500 mm
7211.2320.90
Of a width not exceeding 500 mm
7211.B.A.B
Muud:
7211.B.A.B.A
Of a thickness of 0.35 mm or more
7211.2330.10
Of a width exceeding 500 mm
7211.B.A.B.A.A
Of a width not exceeding 500 mm
7211.2330.91
In coils intended for the manufacture of tinplate
7211.2330.99
Muud
7211.B.A.B.B
Of a thickness of less than 0.35 mm
7211.B.A.B.B.A
Of a width exceeding 500 mm
7211.2380.11
In coils, annealed (known as 'black plates')
7211.2380.19
Muud
7211.B.A.B.B.B
Of a width not exceeding 500 mm
7211.B.A.B.B.B.A
In coils intended for the manufacture of tinplate
7211.2380.93
Annealed (known as 'black plates')
7211.2380.95
Muud
7211.B.A.B.B.B.B
Muud:
7211.2380.97
In coils, annealed (known as 'black plates')
7211.2380.99
Muud
7211.B.B
Muud:
7211.B.B.A
Of a width exceeding 500 mm
7211.2900.11
'electrical'
7211.2900.19
Muud
7211.B.B.B
Of a width not exceeding 500 mm
7211.2900.91
'electrical'
7211.2900.99
Muud
7211.C
Muud:
7211.9020.00
Perforated
7211.C.A
Muud:
7211.C.A.A
Of a width exceeding 500 mm
7211.9080.10
Not further worked than surface-treated
7211.9080.20
Muud
7211.9080.90
Of a width not exceeding 500 mm
7212
Lehtvaltstooted rauast või legeerimata terasest, laiusega alla 600 mm, plakeeritud, pinnatud või muul viisil kaetud:
7212.A
Tinaga pinnatud või kaetud:
7212.1010.00
Tinplate, not further worked than surface-treated
7212.A.A
Muud:
7212.A.A.A
Of a width exceeding 500 mm
7212.1090.11
Not further worked than surface-treated
7212.1090.19
Muud
7212.1090.90
Of a width not exceeding 500 mm
7212.B
Tsingiga elektrolüütiliselt pinnatud või kaetud:
7212.B.A
Of a width exceeding 500 mm
7212.2000.11
Not further worked than surface-treated
7212.2000.19
Muud
7212.2000.90
Of a width not exceeding 500 mm
7212.C
Tsingiga muul viisil pinnatud või kaetud:
7212.3000.20
Aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips
7212.3000.30
Plated or coated by hot dip galvanisation, whether or not alloyed with silicon; chemically passivated; with or without any additional surface treatment such as oiling or sealing; containing by weight: not more than 0.5% of carbon, not more than 1.1% of aluminium, not more than 0.12% of niobium, not more than 0.17% of titanium and not more than 0.15% of vanadium; presented in coils, cut-to-length sheets and narrow strips
7212.3000.80
Muud
7212.D
Värvitud, lakitud või plastiga kaetud:
7212.D.A
Tinplate, not further worked than varnished; products, plated or coated with chromium oxides or with chromium and chromium oxides, varnished
7212.4020.10
Tinplate, not further worked than varnished
7212.D.A.A
Muud:
7212.D.A.A.A
Of a width exceeding 500 mm
7212.4020.91
Not further worked than surface-treated
7212.4020.93
Muud
7212.4020.99
Of a width not exceeding 500 mm
7212.D.B
Muud:
7212.D.B.A
Of a width exceeding 500 mm
7212.D.B.A.A
Not further worked than surface-treated
7212.4080.01
Of non-alloy steel, painted, varnished or coated with plastics on at least one side, excluding products with a final coating of zinc-dust (a zinc-rich paint, containing by weight 70% or more of zinc) and excluding products with a substrate with a metallic coating of chromium or tin
7212.D.B.A.A.A
Muud:
7212.4080.12
Coated or plated with tin
7212.4080.15
Muud
7212.D.B.A.B
Muud:
7212.4080.21
Of non-alloy steel, painted, varnished or coated with plastics on at least one side, excluding so-called 'sandwich panels' of a kind used for building applications and consisting of two outer metal sheets with a stabilising core of insulation material sandwiched between them, and excluding those products with a final coating of zinc-dust (a zinc-rich paint, containing by weight 70% or more of zinc) and excluding products with a substrate with a metallic coating of chromium or tin
7212.D.B.A.B.A
Muud:
7212.4080.30
Coated or plated with tin
7212.4080.35
Muud
7212.D.B.B
Of a width not exceeding 500 mm
7212.D.B.B.A
Of non-alloy steel, painted, varnished or coated with plastics on at least one side, excluding so-called 'sandwich panels' of a kind used for building applications and consisting of two outer metal sheets with a stabilising core of insulation material sandwiched between them, and excluding those products with a final coating of zinc-dust (a zinc-rich paint, containing by weight 70% or more of zinc)
7212.4080.80
Coated or plated with tin
7212.4080.82
Muud
7212.D.B.B.B
Muud:
7212.4080.85
Coated or plated with tin
7212.4080.87
Muud
7212.E
Muul viisil pinnatud või kaetud:
7212.E.A
Kroomoksiididega või kroomi ja kroomoksiididega pinnatud või kaetud:
7212.E.A.A
Of a width exceeding 500 mm
7212.5020.11
Not further worked than surface-treated
7212.5020.19
Muud
7212.5020.90
Of a width not exceeding 500 mm
7212.E.B
Plated or coated with chromium or nickel
7212.E.B.A
Of a width exceeding 500 mm
7212.5030.11
Not further worked than surface-treated
7212.5030.19
Muud
7212.5030.90
Of a width not exceeding 500 mm
7212.E.C
Plated or coated with copper
7212.E.C.A
Of a width exceeding 500 mm
7212.5040.11
Not further worked than surface-treated
7212.5040.19
Muud
7212.5040.90
Of a width not exceeding 500 mm
7212.E.D
Alumiiniumiga pinnatud või kaetud:
7212.E.D.A
Alumiiniumi-tsingisulamiga pinnatud või kaetud:
7212.5061.20
Aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips
7212.5061.30
Plated or coated by hot dip galvanisation, whether or not alloyed with silicon; chemically passivated; with or without any additional surface treatment such as oiling or sealing; containing by weight: not more than 0.5% of carbon, not more than 1.1% of aluminium, not more than 0.12% of niobium, not more than 0.17% of titanium and not more than 0.15% of vanadium; presented in coils, cut-to-length sheets and narrow strips
7212.5061.80
Muud
7212.E.D.B
Muud:
7212.5069.20
Aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips
7212.5069.30
Plated or coated by hot dip galvanisation, whether or not alloyed with silicon; chemically passivated; with or without any additional surface treatment such as oiling or sealing; containing by weight: not more than 0.5% of carbon, not more than 1.1% of aluminium, not more than 0.12% of niobium, not more than 0.17% of titanium and not more than 0.15% of vanadium; presented in coils, cut-to-length sheets and narrow strips
7212.5069.80
Muud
7212.E.E
Muud:
7212.E.E.A
Of a width exceeding 500 mm
7212.5090.11
Silvered, gilded, platinum-plated or enamelled
7212.E.E.A.A
Muud:
7212.5090.13
Not further worked than surface-treated
7212.5090.14
Plated or coated by hot dip galvanisation with magnesium or magnesium-zinc alloys, whether or not alloyed with silicon; chemically passivated; with or without any additional surface treatment such as oiling or sealing; containing by weight: not more than 0.5% of carbon, not more than 1.1% of aluminium, not more than 0.12% of niobium, not more than 0.17% of titanium and not more than 0.15% of vanadium; presented in coils, cut-to-length sheets and narrow strips
7212.5090.19
Muud
7212.E.E.B
Of a width not exceeding 500 mm
7212.5090.92
Plated or coated by hot dip galvanisation with magnesium or magnesium-zinc alloys, whether or not alloyed with silicon; chemically passivated; with or without any additional surface treatment such as oiling or sealing; containing by weight: not more than 0.5% of carbon, not more than 1.1% of aluminium, not more than 0.12% of niobium, not more than 0.17% of titanium and not more than 0.15% of vanadium; presented in coils, cut-to-length sheets and narrow strips
7212.5090.95
Muud
7212.6000.00
Plakeeritud
7213
Kuumvaltsitud varbmaterjal rauast või legeerimata terasest, korrapäratult kokku keritud:
7213.1000.00
Süvendite, nukkide, soonte või muude valtsimisprotsessis tekkinud deformatsioonidega
7213.2000.00
Muud, automaaditerasest
7213.A
Muud:
7213.A.A
Ümmarguse ristlõikega, läbimõõduga alla 14 mm:
7213.9110.00
Of a type used for concrete reinforcement
7213.9120.00
Of a type used for tyre cord
7213.A.A.A
Muud:
7213.9141.00
Containing by weight 0.06% or less of carbon
7213.9149.00
Containing by weight more than 0.06% but less than 0.25% of carbon
7213.9170.00
Containing by weight 0.25% or more but not more than 0.75% of carbon
7213.9190.00
Containing by weight more than 0.75% of carbon
7213.A.B
Muud:
7213.9910.00
Containing by weight less than 0.25% of carbon
7213.9990.00
Containing by weight 0.25% or more of carbon
7214
Muu varbmaterjal rauast või legeerimata terasest, sepistatud, kuumvaltsitud, -tõmmatud või -pressitud (k.. A valtsimisjärgselt väänatud vardad), edasi töötlemata:
7214.A
Sepistatud:
7214.1000.10
Concrete reinforcement bars and rods, containing indentations, ribs, grooves or other deformations produced during the rolling process; excluding high fatigue performance concrete reinforcement bars and rods, and excluding other long products, such as round bars
7214.1000.90
Muud
7214.B
Süvendite, nukkide, soonte või muude valtsimisprotsessis tekkinud deformatsioonidega või valtsimisjärgselt painutatud:
7214.2000.10
High fatigue performance concrete reinforcing bars and rods
7214.B.A
Muud:
7214.2000.20
Concrete reinforcement bars and rods excluding long products, such as round bars
7214.2000.80
Muud
7214.C
Muud, automaaditerasest:
7214.3000.10
Concrete reinforcement bars and rods, containing indentations, ribs, grooves or other deformations produced during the rolling process; excluding high fatigue performance concrete reinforcement bars and rods, and excluding other long products, such as round bars
7214.3000.90
Muud
7214.D
Muud:
7214.D.A
Täisnurkse (v.. A ruudukujulise) ristlõikega:
7214.D.A.A
Containing by weight less than 0.25% of carbon
7214.9110.10
Concrete reinforcement bars and rods, containing indentations, ribs, grooves or other deformations produced during the rolling process; excluding high fatigue performance concrete reinforcement bars and rods, and excluding other long products, such as round bars
7214.9110.90
Muud
7214.D.A.B
Containing by weight 0.25% or more of carbon
7214.9190.10
Concrete reinforcement bars and rods, containing indentations, ribs, grooves or other deformations produced during the rolling process; excluding high fatigue performance concrete reinforcement bars and rods, and excluding other long products, such as round bars
7214.9190.90
Muud
7214.D.B
Muud:
7214.D.B.A
Containing by weight less than 0.25% of carbon
7214.D.B.A.A
Of a type used for concrete reinforcement
7214.9910.10
Bars and rods, containing indentations, ribs, grooves or other deformations produced during the rolling process; excluding high fatigue performance bars and rods, and excluding other long products, such as round bars
7214.9910.90
Muud
7214.D.B.A.B
Other, of circular cross-section measuring in diameter
7214.9931.00
80 mm or more
7214.9939.00
Less than 80 mm
7214.9950.00
Muud
7214.D.B.B
Containing by weight 0.25% or more of carbon
7214.D.B.B.A
Of a circular cross-section measuring in diameter
7214.9971.00
80 mm or more
7214.9979.00
Less than 80 mm
7214.D.B.B.B
Muud:
7214.9995.10
Concrete reinforcement bars and rods, containing indentations, ribs, grooves or other deformations produced during the rolling process; excluding high fatigue performance concrete reinforcement bars and rods, and excluding other long products, such as round bars
7214.9995.90
Muud
7215
Muu varbmaterjal rauast või legeerimata terasest:
7215.1000.00
Automaaditerasest, külmvormitud või -viimistletud, edasi töötlemata
7215.A
Muud, külmvormitud või -viimistletud, edasi töötlemata:
7215.A.A
Containing by weight less than 0.25% of carbon
7215.5011.00
Täisnurkse (v.. A ruudukujulise) ristlõikega
7215.5019.00
Muud
7215.5080.00
Containing by weight 0.25% or more of carbon
7215.B
Muud:
7215.9000.10
Hot-rolled, hot-drawn or extruded, not further worked than clad
7215.9000.90
Muud
7216
Kujuprofiilid rauast või legeerimata terasest:
7216.1000.00
U-, i- ja h-kujulised profiilid, kuumvaltsitud, -tõmmatud või -pressitud, edasi töötlemata, kõrgusega alla 80 mm
7216.A
L- või t-kujulised profiilid, kuumvaltsitud, -tõmmatud või -pressitud, edasi töötlemata, kõrgusega alla 80 mm:
7216.2100.00
L-kujulised profiilid
7216.2200.00
T-kujulised profiilid
7216.B
U-, i- või h-kujulised profiilid, kuumvaltsitud, -tõmmatud või -pressitud, edasi töötlemata, kõrgusega vähemalt 80 mm:
7216.B.A
U-kujulised profiilid:
7216.3110.00
Of a height of 80 mm or more but not exceeding 220 mm
7216.3190.00
Of a height exceeding 220 mm
7216.B.B
I-kujulised profiilid:
7216.B.B.A
Of a height of 80 mm or more but not exceeding 220 mm
7216.3211.00
With parallel flange faces
7216.3219.00
Muud
7216.B.B.B
Of a height exceeding 220 mm
7216.3291.00
With parallel flange faces
7216.3299.00
Muud
7216.B.C
H-kujulised profiilid:
7216.3310.00
Of a height of 80 mm or more but not exceeding 180 mm
7216.3390.00
Of a height exceeding 180 mm
7216.C
L- ja t-kujulised profiilid, kuumvaltsitud, -tõmmatud või -pressitud, edasi töötlemata, kõrgusega vähemalt 80 mm:
7216.4010.00
L-kujulised profiilid
7216.4090.00
T-kujulised profiilid
7216.D
Muud kujuprofiilid, kuumvaltsitud, -tõmmatud või -pressitud, edasi töötlemata:
7216.5010.00
With a cross-section which is capable of being enclosed in a square the side of which is 80 mm
7216.D.A
Muud:
7216.D.A.A
Bulb flats
7216.5091.10
In the range up to 204 mm width
7216.5091.90
Muud
7216.5099.00
Muud
7216.E
Kujuprofiilid, külmvormitud või -viimistletud, edasi töötlemata:
7216.E.A
Lehtvaltstoodetest valmistatud:
7216.6110.00
C, l, u, z, omega or open-ended sections
7216.6190.00
Muud
7216.6900.00
Muud
7216.F
Muud:
7216.F.A
Lehtvaltstoodetest külmvormitud või -viimistletud:
7216.9110.00
Profiled (ribbed) sheets
7216.9180.00
Muud
7216.F.B
Muud:
7216.9900.10
Hot-rolled, hot-drawn or extruded, not further worked than clad
7216.9900.90
Muud
7217
Traat rauast või legeerimata terasest:
7217.A
Pindamata ja katmata pinnaga, poleeritud või poleerimata:
7217.A.A
Containing by weight less than 0.25% of carbon
7217.1010.00
With a maximum cross-sectional dimension of less than 0.8 mm
7217.A.A.A
With a maximum cross-sectional dimension of 0.8 mm or more
7217.1031.00
Süvendite, nukkide, soonte või muude valtsimisprotsessis tekkinud deformatsioonidega
7217.1039.00
Muud
7217.1050.00
Containing by weight 0.25% or more but less than 0.6% of carbon
7217.A.B
Containing by weight 0.6% or more of carbon
7217.1090.10
Of non-alloy steel, with a maximum cross-sectional dimension exceeding 3 mm
7217.1090.90
Muud
7217.B
Tsingiga pinnatud või kaetud
7217.B.A
Containing by weight less than 0.25% of carbon
7217.2010.00
With a maximum cross-sectional dimension of less than 0.8 mm
7217.2030.00
With a maximum cross-sectional dimension of 0.8 mm or more
7217.2050.00
Containing by weight 0.25% or more but less than 0.6% of carbon
7217.B.B
Containing by weight 0.6% or more of carbon
7217.2090.10
Of non-alloy steel, with a maximum cross-sectional dimension exceeding 3 mm
7217.2090.90
Muud
7217.C
Muude mitteväärismetallidega pinnatud või kaetud:
7217.C.A
Containing by weight less than 0.25% of carbon
7217.3041.00
Copper-coated
7217.3049.00
Muud
7217.3050.00
Containing by weight 0.25% or more but less than 0.6% of carbon
7217.3090.00
Containing by weight 0.6% or more of carbon
7217.D
Muud:
7217.9020.00
Containing by weight less than 0.25% of carbon
7217.9050.00
Containing by weight 0.25% or more but less than 0.6% of carbon
7217.9090.00
Containing by weight 0.6% or more of carbon
7218
Roostevaba teras valuplokkidena või muude esmasvormidena; roostevabast terasest pooltooted:
7218.1000.00
Valuplokid jm esmasvormid
7218.A
Muud:
7218.A.A
Täisnurkse (v.. A ruudukujulise) ristlõikega:
7218.9110.00
Containing by weight 2.5% or more of nickel
7218.9180.00
Containing by weight less than 2.5% of nickel
7218.A.B
Muud:
7218.A.B.A
Of square cross-section
7218.9911.00
Rolled or obtained by continous casting
7218.9919.00
Sepistatud
7218.A.B.B
Muud:
7218.9920.00
Rolled or obtained by continuous casting
7218.9980.00
Sepistatud
7218
Roostevaba teras valuplokkidena või muude esmasvormidena; roostevabast terasest pooltooted:
7218.1000.00
Valuplokid jm esmasvormid
7218.B
Muud:
7218.B.A
Täisnurkse (v.. A ruudukujulise) ristlõikega:
7218.9110.00
Containing by weight 2.5% or more of nickel
7218.9180.00
Containing by weight less than 2.5% of nickel
7218.B.B
Muud:
7218.B.B.A
Of square cross-section
7218.9911.00
Rolled or obtained by continous casting
7218.9919.00
Sepistatud
7218.B.B.B
Muud:
7218.9920.00
Rolled or obtained by continuous casting
7218.9980.00
Sepistatud
7219
Lehtvaltstooted roostevabast terasest, laiusega vähemalt 600 mm:
7219.A
Kuumvaltsitud, edasi töötlemata, rullides:
7219.A.A
Paksusega üle 10 mm:
7219.1100.10
Consigned from Türkiye
7219.1100.90
Muud
7219.A.B
Paksusega vähemalt 4,75 mm, kuid mitte üle 10 mm:
7219.A.B.A
Containing by weight 2.5% or more of nickel
7219.1210.10
Consigned from Türkiye
7219.1210.90
Muud
7219.A.B.B
Containing by weight less than 2.5% of nickel
7219.1290.10
Consigned from Türkiye
7219.1290.90
Muud
7219.A.C
Paksusega vähemalt 3 mm, kuid alla 4,75 mm:
7219.A.C.A
Containing by weight 2.5% or more of nickel
7219.1310.10
Consigned from Türkiye
7219.1310.90
Muud
7219.A.C.B
Containing by weight less than 2.5% of nickel
7219.1390.10
Consigned from Türkiye
7219.1390.90
Muud
7219.A.D
Paksusega alla 3 mm:
7219.A.D.A
Containing by weight 2.5% or more of nickel
7219.1410.10
Consigned from Türkiye
7219.1410.90
Muud
7219.A.D.B
Containing by weight less than 2.5% of nickel
7219.1490.10
Consigned from Türkiye
7219.1490.90
Muud
7219.B
Kuumvaltsitud, edasi töötlemata, mitte rullides:
7219.B.A
Paksusega üle 10 mm:
7219.2110.00
Containing by weight 2.5% or more of nickel
7219.2190.00
Containing by weight less than 2.5% of nickel
7219.B.B
Paksusega vähemalt 4,75 mm, kuid mitte üle 10 mm:
7219.B.B.A
Containing by weight 2.5% or more of nickel
7219.2210.10
Consigned from Türkiye
7219.2210.90
Muud
7219.B.B.B
Containing by weight less than 2.5% of nickel
7219.2290.10
Consigned from Türkiye
7219.2290.90
Muud
7219.B.C
Paksusega vähemalt 3 mm, kuid alla 4,75 mm:
7219.2300.10
Consigned from Türkiye
7219.2300.90
Muud
7219.B.D
Paksusega alla 3 mm:
7219.2400.10
Consigned from Türkiye
7219.2400.90
Muud
7219.C
Külmvaltsitud, edasi töötlemata:
7219.C.A
Paksusega vähemalt 4,75 mm:
7219.3100.10
Consigned from Taiwan or Vietnam
7219.3100.20
Consigned from Türkiye
7219.3100.90
Muud
7219.C.B
Paksusega vähemalt 3 mm, kuid alla 4,75 mm:
7219.C.B.A
Containing by weight 2.5% or more of nickel
7219.3210.10
Consigned from Taiwan or Vietnam
7219.3210.20
Consigned from Türkiye
7219.3210.90
Muud
7219.C.B.B
Containing by weight less than 2.5% of nickel
7219.3290.10
Consigned from Taiwan or Vietnam
7219.3290.20
Consigned from Türkiye
7219.3290.90
Muud
7219.C.C
Paksusega üle 1 mm, kuid alla 3 mm:
7219.C.C.A
Containing by weight 2.5% or more of nickel
7219.3310.10
Consigned from Taiwan or Vietnam
7219.3310.20
Consigned from Türkiye
7219.3310.90
Muud
7219.C.C.B
Containing by weight less than 2.5% of nickel
7219.3390.10
Consigned from Taiwan or Vietnam
7219.3390.20
Consigned from Türkiye
7219.3390.90
Muud
7219.C.D
Paksusega vähemalt 0,5 mm, kuid mitte üle 1 mm:
7219.C.D.A
Containing by weight 2.5% or more of nickel
7219.3410.10
Consigned from Taiwan or Vietnam
7219.3410.20
Consigned from Türkiye
7219.3410.90
Muud
7219.C.D.B
Containing by weight less than 2.5% of nickel
7219.3490.10
Consigned from Taiwan or Vietnam
7219.3490.20
Consigned from Türkiye
7219.3490.90
Muud
7219.C.E
Paksusega alla 0,5 mm:
7219.C.E.A
Containing by weight 2.5% or more of nickel
7219.3510.10
Consigned from Taiwan or Vietnam
7219.3510.20
Consigned from Türkiye
7219.3510.90
Muud
7219.C.E.B
Containing by weight less than 2.5% of nickel
7219.3590.10
Consigned from Taiwan or Vietnam
7219.3590.20
Consigned from Türkiye
7219.3590.90
Muud
7219.D
Muud:
7219.D.A
Perforated
7219.9020.10
Consigned from Taiwan or Vietnam
7219.9020.20
Consigned from Türkiye
7219.9020.90
Muud
7219.D.B
Muud:
7219.9080.10
Consigned from Taiwan or Vietnam
7219.9080.20
Consigned from Türkiye
7219.9080.90
Muud
7220
Lehtvaltstooted roostevabast terasest, laiusega alla 600 mm:
7220.A
Not further worked than hot-rolled
7220.A.A
Paksusega vähemalt 4,75 mm:
7220.1100.10
Consigned from Türkiye
7220.1100.90
Muud
7220.A.B
Paksusega alla 4,75 mm:
7220.1200.10
Consigned from Türkiye
7220.1200.90
Muud
7220.B
Külmvaltsitud, edasi töötlemata:
7220.B.A
Of a thickness of 3 mm or more, containing by weight
7220.B.A.A
2.5% or more of nickel
7220.2021.10
Consigned from Taiwan or Vietnam
7220.2021.20
Consigned from Türkiye
7220.2021.90
Muud
7220.B.A.B
Less than 2.5% of nickel
7220.2029.10
Consigned from Taiwan or Vietnam
7220.2029.20
Consigned from Türkiye
7220.2029.90
Muud
7220.B.B
Of a thickness exceeding 0.35 mm but of less than 3 mm, containing by weight
7220.B.B.A
2.5% or more of nickel
7220.2041.10
Consigned from Taiwan or Vietnam
7220.2041.20
Consigned from Türkiye
7220.2041.90
Muud
7220.B.B.B
Less than 2.5% of nickel
7220.2049.10
Consigned from Taiwan or Vietnam
7220.2049.20
Consigned from Türkiye
7220.2049.90
Muud
7220.B.C
Of a thickness not exceeding 0.35 mm, containing by weight
7220.B.C.A
2.5% or more of nickel
7220.2081.10
Consigned from Taiwan or Vietnam
7220.2081.20
Consigned from Türkiye
7220.2081.90
Muud
7220.B.C.B
Less than 2.5% of nickel
7220.2089.10
Consigned from Taiwan or Vietnam
7220.2089.20
Consigned from Türkiye
7220.2089.90
Muud
7220.C
Muud:
7220.C.A
Perforated
7220.9020.10
Consigned from Taiwan or Vietnam
7220.9020.20
Consigned from Türkiye
7220.9020.90
Muud
7220.C.B
Muud:
7220.9080.10
Consigned from Taiwan or Vietnam
7220.9080.20
Consigned from Türkiye
7220.9080.90
Muud
7221
Kuumvaltsitud varbmaterjal roostevabast terasest, korrapäratult kokku keritud:
7221.0010.00
Containing by weight 2.5% or more of nickel
7221.0090.00
Containing by weight less than 2.5% of nickel
7222
Muu varbmaterjal roostevabast terasest; kujuprofiilid roostevabast terasest:
7222.A
Varbmaterjal roostevabast terasest, kuumvaltsitud, -tõmmatud või -pressitud, edasi töötlemata:
7222.A.A
Ümmarguse ristlõikega:
7222.A.A.A
Of a diameter of 80 mm or more, containing by weight
7222.1111.00
2.5% or more of nickel
7222.1119.00
Less than 2.5% of nickel
7222.A.A.B
Of a diameter of less than 80 mm, containing by weight
7222.1181.00
2.5% or more of nickel
7222.1189.00
Less than 2.5% of nickel
7222.A.B
Muud:
7222.1910.00
Containing by weight 2.5% or more of nickel
7222.1990.00
Containing by weight less than 2.5% of nickel
7222.B
Varbmaterjal roostevabast terasest, külmvormitud või -viimistletud, edasi töötlemata:
7222.B.A
Ümmarguse ristlõikega:
7222.B.A.A
Of a diameter of 80 mm or more, containing by weight
7222.2011.00
2.5% or more of nickel
7222.2019.00
Less than 2.5% of nickel
7222.B.A.B
Of a diameter of 25 mm or more, but less than 80 mm, containing by weight
7222.2021.00
2.5% or more of nickel
7222.2029.00
Less than 2.5% of nickel
7222.B.A.C
Of a diameter of less than 25 mm, containing by weight
7222.2031.00
2.5% or more of nickel
7222.2039.00
Less than 2.5% of nickel
7222.B.B
Other, containing by weight
7222.2081.00
2.5% or more of nickel
7222.2089.00
Less than 2.5% of nickel
7222.C
Muu varbmaterjal:
7222.C.A
Forged, containing by weight
7222.3051.00
2.5% or more of nickel
7222.3091.00
Less than 2.5% of nickel
7222.C.B
Muud:
7222.3097.10
Hot-rolled, hot-drawn or extruded, not further worked than clad
7222.3097.90
Muud
7222.D
Kujuprofiilid
7222.4010.00
Not further worked than hot-rolled, hot-drawn or extruded
7222.4050.00
Not further worked than cold-formed or cold-finished
7222.D.A
Muud:
7222.4090.10
Hot-rolled, hot-drawn or extruded, not further worked than clad
7222.4090.90
Muud
7223
Roostevabast terasest traat:
7223.A
Containing by weight 2.5% or more of nickel
7223.0011.00
Containing by weight 28% or more but not more than 31% of nickel and 20% or more but not more than 22% of chromium
7223.0019.00
Muud
7223.B
Containing by weight less than 2.5% of nickel
7223.0091.00
Containing by weight 13% or more but not more than 25% of chromium and 3.5% or more but not more than 6% of aluminium
7223.0099.00
Muud
7224
Muu legeerteras valuplokkidena vm esmasvormidena; muust legeerterasest pooltooted:
7224.A
Valuplokid jm esmasvormid:
7224.1010.00
Of tool steel
7224.1090.00
Muud
7224.B
Muud:
7224.B.A
Of tool steel
7224.9002.29
Of rectangular (including square) cross-section
7224.B.A.A
Muud:
7224.9002.89
Hot-rolled or obtained by continuous casting
7224.9002.99
Muud
7224.B.B
Muud:
7224.B.B.A
Of rectangular (including square) cross-section
7224.B.B.A.A
Hot-rolled or obtained by continuous casting
7224.B.B.A.A.A
The width measuring less than twice the thickness
7224.9003.00
Kiirlõiketerasest
7224.9005.00
Containing by weight not more than 0.7% of carbon, 0.5% or more but not more than 1.2% of manganese and 0.6% or more but not more than 2.3% of silicon; containing by weight 0.0008% or more of boron with any other element less than the minimum content referred to in note 1(f) to this chapter
7224.9007.00
Muud
7224.9014.00
Muud
7224.9018.00
Sepistatud
7224.B.B.B
Muud:
7224.B.B.B.A
Hot-rolled or obtained by continuous casting
7224.9031.00
Containing by weight not less than 0.9% but not more than 1.15% of carbon, not less than 0.5% but not more than 2% of chromium and, if present, not more than 0.5% of molybdenum
7224.9038.00
Muud
7224.9090.00
Sepistatud
7224
Muu legeerteras valuplokkidena vm esmasvormidena; muust legeerterasest pooltooted:
7224.C
Valuplokid jm esmasvormid:
7224.1010.00
Of tool steel
7224.1090.00
Muud
7224.D
Muud:
7224.D.A
Of tool steel
7224.9002.29
Of rectangular (including square) cross-section
7224.D.A.A
Muud:
7224.9002.89
Hot-rolled or obtained by continuous casting
7224.9002.99
Muud
7224.D.B
Muud:
7224.D.B.A
Of rectangular (including square) cross-section
7224.D.B.A.A
Hot-rolled or obtained by continuous casting
7224.D.B.A.A.A
The width measuring less than twice the thickness
7224.9003.00
Kiirlõiketerasest
7224.9005.00
Containing by weight not more than 0.7% of carbon, 0.5% or more but not more than 1.2% of manganese and 0.6% or more but not more than 2.3% of silicon; containing by weight 0.0008% or more of boron with any other element less than the minimum content referred to in note 1(f) to this chapter
7224.9007.00
Muud
7224.9014.00
Muud
7224.9018.00
Sepistatud
7224.D.B.B
Muud:
7224.D.B.B.A
Hot-rolled or obtained by continuous casting
7224.9031.00
Containing by weight not less than 0.9% but not more than 1.15% of carbon, not less than 0.5% but not more than 2% of chromium and, if present, not more than 0.5% of molybdenum
7224.9038.00
Muud
7224.9090.00
Sepistatud
7225
Lehtvaltstooted muust legeerterasest, laiusega vähemalt 600 mm:
7225.A
Elektrotehnilisest räniterasest:
7225.A.A
Suundorienteeritud struktuuriga:
7225.A.A.A
Of a thickness exceeding 0.16 mm
7225.1100.11
With a maximum core loss not higher than 0.9 w/kg
7225.1100.15
With a maximum core loss higher than 0.9 w/kg but not higher than 1.05 w/kg
7225.1100.19
With a maximum core loss higher than 1.05 w/kg
7225.1100.90
Muud
7225.A.B
Muud:
7225.A.B.A
Hot-rolled
7225.1910.10
Products clad, plated or coated, not in coils, without patterns in relief, of a thickness exceeding 10 mm and products clad, plated or coated, not in coils, without patterns in relief, of a thickness of 4.75 mm or more but not exceeding 10 mm and of a width of 2 050 mm or more
7225.1910.90
Muud
7225.1990.00
Cold-rolled
7225.B
Muust legeerterasest, kuumvaltsitud, kuid edasi töötlemata, rullides:
7225.3010.00
Of tool steel
7225.B.A
Kiirlõiketerasest
7225.3030.10
Not further worked than rolled; not further worked than surface-treated, including cladding or simply cut into shapes other than rectangular (including square)
7225.3030.90
Muud
7225.3090.00
Muud
7225.C
Muust legeerterasest, kuumvaltsitud, kuid edasi töötlemata, mitte rullides:
7225.4012.00
Of tool steel
7225.4015.00
Kiirlõiketerasest
7225.C.A
Muud:
7225.4040.00
Paksusega üle 10 mm
7225.C.A.A
Paksusega vähemalt 4,75 mm, kuid mitte üle 10 mm:
7225.4060.10
Of a width of 2 050 mm or more
7225.4060.90
Muud
7225.4090.00
Paksusega alla 4,75 mm
7225.D
Muud, külmvaltsitud, edasi töötlemata:
7225.D.A
Kiirlõiketerasest
7225.5020.10
Not further worked than rolled; not further worked than surface-treated, including cladding or simply cut into shapes other than rectangular (including square)
7225.5020.90
Muud
7225.5080.00
Muud
7225.E
Muud:
7225.E.A
Tsingiga elektrolüütiliselt pinnatud või kaetud:
7225.9100.10
Not further worked than surface-treated, including cladding or simply cut into shapes other than rectangular (including square)
7225.9100.90
Muud
7225.E.B
Tsingiga muul viisil pinnatud või kaetud:
7225.9200.20
Aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips
7225.9200.30
Plated or coated by hot dip galvanisation, whether or not alloyed with silicon; chemically passivated; with or without any additional surface treatment such as oiling or sealing; containing by weight: not more than 0.5% of carbon, not more than 1.1% of aluminium, not more than 0.12% of niobium, not more than 0.17% of titanium and not more than 0.15% of vanadium; presented in coils, cut-to-length sheets and narrow strips
7225.9200.80
Muud
7225.E.C
Muud:
7225.E.C.A
Not further worked than surface-treated, including cladding or simply cut into shapes other than rectangular (including square)
7225.9900.11
Painted, varnished or coated with plastics on at least one side, excluding products with a final coating of zinc-dust (a zinc-rich paint, containing by weight 70% or more of zinc) and excluding products with a substrate with a metallic coating of chromium or tin
7225.9900.22
Other, aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips
7225.9900.23
Plated or coated by hot dip galvanisation with magnesium and/or aluminium, whether or not alloyed with zinc, whether or not alloyed with silicon; chemically passivated; with additional surface treatment such as oiling or sealing; containing by weight: not more than 0.5% of carbon, not more than 1.1% of aluminium, not more than 0.12% of niobium, not more than 0.17% of titanium and not more than 0.15% of vanadium; presented in coils, cut-to-length sheets and narrow strips
7225.9900.25
Muud
7225.E.C.B
Other, of a thickness exceeding 10 mm or of a thickness of 4.75 mm or more but not exceeding 10 mm and of a width of 2 050 mm or more
7225.9900.41
Plated or coated by hot dip galvanisation with magnesium and/or aluminium, whether or not alloyed with zinc, whether or not alloyed with silicon; chemically passivated; with additional surface treatment such as oiling or sealing; containing by weight: not more than 0.5% of carbon, not more than 1.1% of aluminium, not more than 0.12% of niobium, not more than 0.17% of titanium and not more than 0.15% of vanadium; presented in coils, cut-to-length sheets and narrow strips
7225.9900.45
Muud
7225.E.C.C
Muud:
7225.9900.91
Painted, varnished or coated with plastics on at least one side, excluding so-called "sandwich panels" of a kind used for building applications and consisting of two outer metal sheets with a stabilising core of insulation material sandwiched between them, excluding those products with a final coating of zinc-dust (a zinc-rich paint, containing by weight 70% or more of zinc) and excluding products with a substrate with a metallic coating of chromium or tin
7225.9900.92
Other, aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips
7225.9900.93
Plated or coated by hot dip galvanisation with magnesium and/or aluminium, whether or not alloyed with zinc, whether or not alloyed with silicon; chemically passivated; with additional surface treatment such as oiling or sealing; containing by weight: not more than 0.5% of carbon, not more than 1.1% of aluminium, not more than 0.12% of niobium, not more than 0.17% of titanium and not more than 0.15% of vanadium; presented in coils, cut-to-length sheets and narrow strips
7225.9900.95
Muud
7226
Lehtvaltstooted muust legeerterasest, laiusega alla 600 mm:
7226.A
Elektrotehnilisest räniterasest:
7226.A.A
Suundorienteeritud struktuuriga:
7226.A.A.A
Of a width exceeding 500 mm
7226.A.A.A.A
Of a thickness exceeding 0.16 mm
7226.1100.12
With a maximum core loss not higher than 0.9 w/kg
7226.1100.14
With a maximum core loss higher than 0.9 w/kg but not higher than 1.05 w/kg
7226.1100.16
With a maximum core loss higher than 1.05 w/kg
7226.1100.19
Muud
7226.A.A.B
Of a width not exceeding 500 mm
7226.A.A.B.A
Of a thickness exceeding 0.16 mm
7226.1100.92
With a maximum core loss not higher than 0.9 w/kg
7226.1100.94
With a maximum core loss higher than 0.9 w/kg but not higher than 1.05 w/kg
7226.1100.96
With a maximum core loss higher than 1.05 w/kg
7226.1100.99
Muud
7226.A.B
Muud:
7226.A.B.A
Not further worked than hot-rolled
7226.1910.10
Products clad, plated or coated
7226.A.B.A.A
Muud:
7226.1910.91
Of a width not exceeding 350 mm and of a thickness of 50 mm or more
7226.1910.95
Muud
7226.A.B.B
Muud:
7226.1980.10
Of a width exceeding 500 mm
7226.1980.90
Of a width not exceeding 500 mm
7226.2000.00
Kiirlõiketerasest
7226.B
Muud:
7226.B.A
Not further worked than hot-rolled
7226.9120.00
Of tool steel
7226.B.A.A
Muud:
7226.B.A.A.A
Paksusega vähemalt 4,75 mm:
7226.9191.11
Of a width not exceeding 350 mm and of a thickness of 50 mm or more
7226.9191.19
Muud
7226.9199.00
Paksusega alla 4,75 mm
7226.B.B
Külmvaltsitud, edasi töötlemata:
7226.9200.10
Of a width exceeding 500 mm
7226.9200.90
Of a width not exceeding 500 mm
7226.B.C
Muud:
7226.9910.00
Tsingiga elektrolüütiliselt pinnatud või kaetud
7226.B.C.A
Tsingiga muul viisil pinnatud või kaetud:
7226.9930.10
Aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips
7226.9930.30
Plated or coated by hot dip galvanisation, whether or not alloyed with silicon; chemically passivated; with or without any additional surface treatment such as oiling or sealing; containing by weight: not more than 0.5% of carbon, not more than 1.1% of aluminium, not more than 0.12% of niobium, not more than 0.17% of titanium and not more than 0.15% of vanadium; presented in coils, cut-to-length sheets and narrow strips
7226.9930.90
Muud
7226.B.C.B
Muud:
7226.B.C.B.A
Of a width not exceeding 500 mm, hot-rolled, not further worked than clad; of a width exceeding 500 mm, not further worked than surface-treated, including cladding
7226.9970.11
Painted, varnished or coated with plastics on at least one side, excluding products with a final coating of zinc-dust (a zinc-rich paint, containing by weight 70% or more of zinc) and excluding products with a substrate with a metallic coating of chromium or tin
7226.9970.13
Plated or coated by hot dip galvanisation with magnesium and/or aluminium, whether or not alloyed with zinc, whether or not alloyed with silicon; chemically passivated; with or without additional surface treatment such as oiling or sealing; containing by weight: not more than 0.5% of carbon, not more than 1.1% of aluminium, not more than 0.12% of niobium, not more than 0.17% of titanium and not more than 0.15% of vanadium; presented in coils, cut-to-length sheets and narrow strips
7226.9970.19
Muud
7226.B.C.B.B
Muud:
7226.9970.91
Painted, varnished or coated with plastics on at least one side, excluding so-called "sandwich panels" of a kind used for building applications and consisting of two outer metal sheets with a stabilising core of insulation material sandwiched between them, excluding those products with a final coating of zinc-dust (a zinc-rich paint, containing by weight 70% or more of zinc) and excluding products with a substrate with a metallic coating of chromium or tin
7226.9970.93
Plated or coated by hot dip galvanisation with magnesium and/or aluminium, whether or not alloyed with zinc, whether or not alloyed with silicon; chemically passivated; with or without additional surface treatment such as oiling or sealing; containing by weight: not more than 0.5% of carbon, not more than 1.1% of aluminium, not more than 0.12% of niobium, not more than 0.17% of titanium and not more than 0.15% of vanadium; presented in coils, cut-to-length sheets and narrow strips
7226.9970.94
Other, aluminium killed; plated or coated by hot dip galvanisation with zinc and/or with aluminium, and no other metal; chemically passivated; containing by weight: 0.015% or more but not more than 0.170% of carbon, 0.015% or more but not more than 0.100% of aluminium, not more than 0.045% of niobium, not more than 0.010% of titanium and not more than 0.010% of vanadium; presented in coils, cut-to-length sheets and narrow strips
7226.9970.96
Muud
7227
Kuumvaltsitud varbmaterjal muust legeerterasest, korrapäratult kokku keritud:
7227.1000.00
Kiirlõiketerasest
7227.2000.00
Ränimangaanterasest
7227.A
Muud:
7227.9010.00
Containing by weight 0.0008% or more of boron with any other element less than the minimum content referred to in note 1(f) to this chapter
7227.9050.00
Containing by weight 0.9% or more but not more than 1.15% of carbon, 0.5% or more but not more than 2% of chromium and, if present, not more than 0.5% of molybdenum
7227.9095.00
Muud
7228
Muust legeerterasest varbmaterjal; muust legeerterasest kujuprofiilid; legeeritud või legeerimata terasest puurtorud:
7228.A
Kiirlõiketerasest varbmaterjal:
7228.1020.00
Not further worked than hot-rolled, hot-drawn or extruded; hot-rolled, hot-drawn or extruded, not further worked than clad
7228.1050.00
Sepistatud
7228.1090.00
Muud
7228.B
Ränimangaanterasest varbmaterjal:
7228.B.A
Of rectangular (other than square) cross-section, hot-rolled on four faces
7228.2010.10
Not further worked than hot-rolled, hot-drawn or extruded
7228.B.A.A
Muud:
7228.2010.91
Hot-rolled, hot-drawn or extruded, not further worked than clad
7228.2010.99
Muud
7228.B.B
Muud:
7228.2091.00
Not further worked than hot-rolled, hot-drawn or extruded; hot-rolled, hot-drawn or extruded, not further worked than clad
7228.2099.00
Muud
7228.C
Muu varbmaterjal, kuumvaltsitud, -tõmmatud või -pressitud, edasi töötlemata:
7228.3020.00
Of tool steel
7228.C.A
Containing by weight 0.9% or more but not more than 1.15% of carbon, 0.5% or more but not more than 2% of chromium and, if present, not more than 0.5% of molybdenum
7228.3041.00
Of circular cross-section of a diameter of 80 mm or more
7228.3049.00
Muud
7228.C.B
Muud:
7228.C.B.A
Of circular cross-section, of a diameter of
7228.3061.00
80 mm or more
7228.3069.00
Less than 80 mm
7228.3070.00
Of rectangular (other than square) cross-section, hot-rolled on four faces
7228.3089.00
Muud
7228.D
Muu varbmaterjal, sepistatud, edasi töötlemata:
7228.4010.00
Of tool steel
7228.4090.00
Muud
7228.E
Muu varbmaterjal, külmvormitud või -viimistletud, edasi töötlemata:
7228.5020.00
Of tool steel
7228.5040.00
Containing by weight 0.9% or more but not more than 1.15% of carbon, 0.5% or more but not more than 2% of chromium and, if present, not more than 0.5% of molybdenum
7228.E.A
Muud:
7228.E.A.A
Of circular cross-section, of a diameter of
7228.5061.00
80 mm or more
7228.5069.00
Less than 80 mm
7228.5080.00
Muud
7228.F
Muu varbmaterjal:
7228.F.A
Of tool steel
7228.6020.10
Hot-rolled, hot-drawn or extruded, not further worked than clad
7228.6020.90
Muud
7228.F.B
Muud:
7228.6080.10
Hot-rolled, hot-drawn or extruded, not further worked than clad
7228.6080.90
Muud
7228.G
Kujuprofiilid
7228.7010.00
Not further worked than hot-rolled, hot-drawn or extruded
7228.G.A
Muud:
7228.7090.10
Hot-rolled, hot-drawn or extruded, not further worked than clad
7228.7090.90
Muud
7228.8000.00
Puurtorud
7229
Legeerterasest traat:
7229.2000.00
Ränimangaanterasest
7229.A
Muud:
7229.9020.00
Kiirlõiketerasest
7229.9050.00
Containing by weight 0.9% or more but not more than 1.15% of carbon, 0.5% or more but not more than 2% of chromium and, if present, not more than 0.5% of molybdenum
7229.9090.00
Muud

Need help to the find appropriate HS Code ?