HS-koodid - 72: Raud ja teras:

7201
Toormalm ja peegelmalm kangide, plokkide või muude esmasvormidena:
7201.10
Non-alloy pig iron containing by weight 0.5 % or less of phosphorus
7201.10.010
- Containing less than 1.2 % by weight of silicon and not more than 0.04 % by weight of phosphorus
7201.A
- Other
7201.10.091
-- Containing by weight less than 1.6 % of silicon
7201.10.099
-- Other
7201.20.000
Non-alloy pig iron containing by weight more than 0.5 % of phosphorus
7201.50.000
Legeeritud toormalm; peegelmalm
7202
Ferrosulamid:
7202.A
Ferromangaan:
7202.11.000
Süsinikusisaldusega üle 2 % massist
7202.19.000
Muud
7202.B
Ferrosiliitsium:
7202.21.000
Ränisisaldusega üle 55 % massist
7202.29.000
Muud
7202.30.000
Ferrosilikomangaan
7202.C
Ferrokroom:
7202.41.000
Süsinikusisaldusega üle 4 % massist
7202.49.000
Muud
7202.50.000
Ferrosilikokroom
7202.60
Ferronikkel
7202.60.010
- Containing by weight less than 33 % of nickel
7202.60.090
- Other
7202.70.000
Ferromolübdeen
7202.80
Ferrovolfram ja ferrosilikovolfram
7202.80.010
1 Ferro-tungsten
7202.80.020
2 Ferro-silico-tungsten
7202.D
Muud:
7202.91.000
Ferrotitaan ja ferrosilikotitaan
7202.92.000
Ferrovanaadium
7202.93.000
Ferronioobium
7202.99
Muud
7202.99.010
- Ferro-phosphorus
7202.99.090
- Other
7203
Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99.94 %, in lumps, pellets or similar forms
7203.10.000
Rauamaagi otsesel redutseerimisel saadud raud
7203.90.000
Muud
7204
Malmi ja terase jäätmed ja jäägid; praagitud raua või terase valuplokid ümbersulatamiseks:
7204.10.000
Malmijäätmed ja -jäägid
7204.A
Legeerterase jäätmed ja jäägid:
7204.21.000
Roostevabast terasest
7204.29.000
Muud
7204.30.000
Tinatatud malmi või terase jäätmed ja jäägid
7204.B
Muud jäätmed ja jäägid:
7204.41.000
Trei-, höövli- ja raielaastud, freesimisjäätmed, saagimisjäätmed, viilmed, lõikmed ning stantsimisjäätmed, pakettidena või mitte
7204.49.000
Muud
7204.50
Praagitud valuplokid ümbersulatamiseks
7204.50.010
1 Of alloy steel
7204.50.020
2 Other
7205
Graanulid ja pulber toormalmist, peegelmalmist, rauast või terasest:
7205.10.000
Graanulid
7205.A
Pulber:
7205.21
Legeerterasest
7205.21.010
- Containing not less than 1% but less than 5 % by weight of nickel
7205.21.090
- Other
7205.29.000
Muud
72.A
II.- IRON AND NON-ALLOY STEEL
7206
Iron and non-alloy steel in ingots or other primary forms (excluding iron of heading 72.03)
7206.10
Valuplokid
7206.10.010
1 Containing by weight less than 0.6 % of carbon
7206.10.020
2 Other
7206.90
Muud:
7206.90.010
1 Containing by weight less than 0.6 % of carbon
7206.90.020
2 Other
7207
Pooltooted rauast või legeerimata terasest:
7207.A
Containing by weight less than 0.25 % of carbon:
7207.11.000
Täisnurkse (k.. A ruudukujulise) ristlõikega, laiusega alla kahekordse paksuse
7207.12.000
Muud täisnurkse (v.. A ruudukujulise) ristlõikega
7207.19.000
Muud
7207.20
Containing by weight 0.25 % or more of carbon
7207.20.A
1 Containing by weight less than 0.6 % of carbon
7207.20.011
- Billets
7207.20.012
- Slabs
7207.20.019
- Other
7207.20.020
2 Other
7208
Lehtvaltstooted rauast või legeerimata terasest, laiusega vähemalt 600 mm, kuumvaltsitud, plakeerimata, pindamata ja muul viisil katmata:
7208.10
Rullides, kuumvaltsitud, kuid edasi töötlemata, reljeefse mustriga
7208.10.010
1 Containing by weight less than 0.6 % of carbon
7208.10.A
2 Other
7208.10.021
(1)Of a thickness of less than 3 mm and having a minimum yield point of 275 MPa or of a thickness of 3 mm or more and having a minimum yield point of 355 MPa
7208.10.029
(2)Other
7208.A
Muud, rullides, kuumvaltsitud, kuid edasi töötlemata, söövitatud:
7208.25
Paksusega vähemalt 4,75 mm:
7208.25.A
1 Containing by weight less than 0.6 % of carbon
7208.25.011
- Of a thickness of less than 6 mm
7208.25.019
- Other
7208.25.B
2 Other
7208.25.020
(1)Having a minimum yield point of 355 MPa
7208.25.030
(2)Other
7208.26
Paksusega vähemalt 3 mm, kuid alla 4,75 mm:
7208.26.A
1 Containing by weight less than 0.6 % of carbon
7208.26.011
- High tensile steel of a tensile strength of 490 MPa or more
7208.26.019
- Other
7208.26.B
2 Other
7208.26.021
(1)Having a minimum yield point of 355 MPa
7208.26.029
(2)Other
7208.27
Paksusega alla 3 mm:
7208.27.A
1 Containing by weight less than 0.6 % of carbon
7208.27.011
- High tensile steel of a tensile strength of 490 MPa or more
7208.27.019
- Other
7208.27.B
2 Other
7208.27.021
(1)Having a minimum yield point of 275 MPa
7208.27.029
(2)Other
7208.B
Muud, rullides, kuumvaltsitud, kuid edasi töötlemata:
7208.36
Paksusega üle 10 mm:
7208.36.010
1 Containing by weight less than 0.6% of carbon
7208.36.A
2 Other
7208.36.021
(1)Having a minimum yield point of 355 MPa
7208.36.029
(2)Other
7208.37
Paksusega vähemalt 4,75 mm, kuid mitte üle 10 mm:
7208.37.A
1 Containing by weight less than 0.6 % of carbon
7208.37.011
- Of a thickness of less than 6 mm
7208.37.019
- Other
7208.37.B
2 Other
7208.37.020
(1)Having a minimum yield point of 355 MPa
7208.37.030
(2)Other
7208.38
Paksusega vähemalt 3 mm, kuid alla 4,75 mm:
7208.38.010
1 Containing by weight less than 0.6% of carbon
7208.38.A
2 Other
7208.38.021
(1)Having a minimum yield point of 355 MPa
7208.38.029
(2)Other
7208.39
Paksusega alla 3 mm:
7208.39.010
1 Containing by weight less than 0.6 % of carbon
7208.39.A
2 Other
7208.39.021
(1)Having a minimum yield point of 275 MPa
7208.39.029
(2)Other
7208.40
Mitte rullides, kuumvaltsitud, kuid edasi töötlemata, reljeefse mustriga:
7208.40.010
1 Containing by weight less than 0.6 % of carbon
7208.40.A
2 Other
7208.40.020
(1)Of a thickness of less than of 3 mm and having a minimum yield point of 275 MPa or of a thickness of 3 mm or more and having a minimum yield point of 355 MPa
7208.40.030
(2)Other
7208.C
Muud, mitte rullides, kuumvaltsitud, kuid edasi töötlemata:
7208.51
Paksusega üle 10 mm:
7208.51.A
1 Containing by weight less than 0.6 % of carbon
7208.51.011
- Of a thickness of not exceeding 50 mm
7208.51.019
- Of a thickness exceeding 50 mm
7208.51.B
2 Other
7208.51.B.A
(1)Having a minimum yield point of 355 MPa
7208.51.021
- Of a thickness of not exceeding 50 mm
7208.51.029
- Of a thickness exceeding 50 mm
7208.51.B.B
(2)Other
7208.51.031
- Of a thickness of not exceeding 50 mm
7208.51.039
- Of a thickness exceeding 50 mm
7208.52
Paksusega vähemalt 4,75 mm, kuid mitte üle 10 mm:
7208.52.A
1 Containing by weight less than 0.6 % of carbon
7208.52.011
- Of a thickness of less than 6 mm
7208.52.019
- Other
7208.52.B
2 Other
7208.52.B.A
(1)Having a minimum yield point of 355 MPa
7208.52.021
- Of a thickness of less than 6 mm
7208.52.029
- Other
7208.52.B.B
(2)Other
7208.52.031
- Of a thickness of less than 6 mm
7208.52.039
- Other
7208.53
Paksusega vähemalt 3 mm, kuid alla 4,75 mm:
7208.53.010
1 Containing by weight less than 0.6 % of carbon
7208.53.A
2 Other
7208.53.021
(1)Having a minimum yield point of 355 MPa
7208.53.029
(2)Other
7208.54
Paksusega alla 3 mm:
7208.54.010
1 Containing by weight less than 0.6 % of carbon
7208.54.A
2 Other
7208.54.021
(1)Having a minimum yield point of 275 MPa
7208.54.029
(2)Other
7208.90.000
Muud
7209
Lehtvaltstooted rauast või legeerimata terasest, laiusega vähemalt 600 mm, külmvaltsitud, plakeerimata, pindamata või muul viisil katmata:
7209.A
Rullides, külmvaltsitud, kuid edasi töötlemata:
7209.15
Paksusega vähemalt 3 mm:
7209.15.010
1 Containing by weight less than 0.6 % of carbon
7209.15.A
2 Other
7209.15.021
(1)Having a minimum yield point of 355 MPa
7209.15.029
(2)Other
7209.16
Of a thickness exceeding 1mm but less than 3 mm
7209.16.A
1 Containing by weight less than 0.6% of carbon
7209.16.011
- High tensile steel of a tensile strength of 340 MPa or more
7209.16.019
- Other
7209.16.B
2 Other
7209.16.021
(1)Having a minimum yield point of 275 MPa
7209.16.029
(2)Other
7209.17
Paksusega vähemalt 0,5 mm, kuid mitte üle 1 mm:
7209.17.A
1 Containing by weight less than 0.6 % of carbon
7209.17.011
- High tensile steel of a tensile strength of 340 MPa or more
7209.17.019
- Other
7209.17.B
2 Other
7209.17.021
(1)Having a minimum yield point of 275 MPa
7209.17.029
(2)Other
7209.18
Paksusega alla 0,5 mm:
7209.18.010
1 Containing by weight less than 0.6 % of carbon
7209.18.A
2 Other
7209.18.021
(1)Having a minimum yield point of 275 MPa
7209.18.029
(2)Other
7209.B
Mitte rullides, külmvaltsitud, kuid edasi töötlemata:
7209.25
Paksusega vähemalt 3 mm:
7209.25.010
1 Containing by weight less than 0.6 % of carbon
7209.25.A
2 Other
7209.25.021
(1)Having a minimum yield point of 355 MPa
7209.25.029
(2)Other
7209.26
Of a thickness exceeding 1mm but less than 3 mm
7209.26.010
1 Containing by weight less than 0.6 % of carbon
7209.26.A
2 Other
7209.26.021
(1)Having a minimum yield point of 275 MPa
7209.26.029
(2)Other
7209.27
Paksusega vähemalt 0,5 mm, kuid mitte üle 1 mm:
7209.27.010
1 Containing by weight less than 0.6 % of carbon
7209.27.A
2 Other
7209.27.021
(1)Having a minimum yield point of 275 MPa
7209.27.029
(2)Other
7209.28
Paksusega alla 0,5 mm:
7209.28.010
1 Containing by weight less than 0.6 % of carbon
7209.28.A
2 Other
7209.28.021
(1)Having a minimum yield point of 275 MPa
7209.28.029
(2)Other
7209.90.000
Muud
7210
Lehtvaltstooted rauast ja legeerimata terasest, laiusega vähemalt 600 mm, plakeeritud, pinnatud või muul viisil kaetud:
7210.A
Tinaga pinnatud või kaetud:
7210.11.000
Paksusega vähemalt 0,5 mm
7210.12.000
Paksusega alla 0,5 mm
7210.20.000
Pliiga (sh plii ja tina sulamiga) pinnatud või kaetud
7210.30
Tsingiga elektrolüütiliselt pinnatud või kaetud:
7210.30.010
1 Containing by weight less than 0.6% of carbon
7210.30.A
2 Other
7210.30.021
(1)Of steel of a thickness of less than 3 mm and having a minimum yield point of 275 MPa or of a thickness of 3 mm or more and having a minimum yield point of 355 MPa
7210.30.029
(2)Other
7210.B
Tsingiga muul viisil pinnatud või kaetud:
7210.41.000
Gofreeritud
7210.49
Muud
7210.49.010
- Hot-dip galvannealed, of plated or coated layers undergone a homogeneous alloying process (containing by weight of 7 % or more of iron in the entire layers)
7210.49.090
- Other
7210.50
Kroomoksiididega või kroomi ja kroomoksiididega pinnatud või kaetud
7210.50.010
- Tinfree steel
7210.50.090
- Other
7210.C
Alumiiniumiga pinnatud või kaetud:
7210.61.000
Alumiiniumi-tsingisulamiga pinnatud või kaetud
7210.69.000
Muud
7210.70.000
Värvitud, lakitud või plastiga kaetud
7210.90
Muud:
7210.90.010
1 Containing by weight less than 0.6 % of carbon
7210.90.020
2 Other
7211
Lehtvaltstooted rauast ja legeerimata terasest, laiusega alla 600 mm, plakeerimata, pindamata või muul viisil katmata:
7211.A
Not further worked than hot-rolled:
7211.13
Valtsitud neljalt küljelt või kinnises kaliibris, laiusega üle 150 mm, paksusega vähemalt 4 mm, mitte rullides, reljeefse mustrita:
7211.13.010
1 Containing by weight less than 0.6 % of carbon
7211.13.A
2 Other
7211.13.021
(1)Having a minimum yield point of 355 MPa
7211.13.029
(2)Other
7211.14
Muud, paksusega vähemalt 4,75 mm:
7211.14.010
1 Containing by weight less than 0.6 % of carbon
7211.14.A
2 Other
7211.14.021
(1)Having a minimum yield point of 355 MPa
7211.14.029
(2)Other
7211.19
Muud:
7211.19.010
1 Containing by weight less than 0.6 % of carbon
7211.19.A
2 Other
7211.19.021
(1)Of a thickness of less than 3 mm and having a minimum yield point of 275 MPa or of a thickness of 3 mm or more and having a minimum yield point of 355 MPa
7211.19.029
(2)Other
7211.B
Külmvaltsitud, edasi töötlemata:
7211.23.000
Containing by weight less than 0.25 % of carbon
7211.29
Muud:
7211.29.010
1 Of a thickness of less than 3 mm and having a minimum yield point of 275 MPa or of a thickness of 3 mm or more and having a minimum yield point of 355 MPa
7211.29.090
2 Other
7211.90.000
Muud
7212
Flat-rolled products of iron or non-alloy steel, of a width of less than 600mm, clad, plated or coated
7212.10.000
Tinaga pinnatud või kaetud
7212.20
Tsingiga elektrolüütiliselt pinnatud või kaetud:
7212.20.010
1 Containing by weight less than 0.6 % of carbon
7212.20.A
2 Other
7212.20.021
(1)Of steel of a thickness of less than 3 mm and having a minimum yield point of 275 MPa or of a thickness of 3 mm or more and having a minimum yield point of 355 MPa
7212.20.029
(2)Other
7212.30.000
Tsingiga muul viisil pinnatud või kaetud
7212.40.000
Värvitud, lakitud või plastiga kaetud
7212.50
Muul viisil pinnatud või kaetud
7212.50.010
- Tinfree steel
7212.50.090
- Other
7212.60
Plakeeritud
7212.60.010
1 Containing by weight less than 0.6 % of carbon
7212.60.020
2 Other
7213
Kuumvaltsitud varbmaterjal rauast või legeerimata terasest, korrapäratult kokku keritud:
7213.10.000
Süvendite, nukkide, soonte või muude valtsimisprotsessis tekkinud deformatsioonidega
7213.20.000
Muud, automaaditerasest
7213.A
Muud:
7213.91
Ümmarguse ristlõikega, läbimõõduga alla 14 mm:
7213.91.A
1 Containing by weight less than 0.6 % of carbon
7213.91.B
- Containing by weight less than 0.25 % of carbon
7213.91.011
-- Measuring less than 6 mm in diameter
7213.91.019
-- Other
7213.91.020
- Other
7213.91.090
2 Other
7213.99
Muud:
7213.99.020
1 Containing by weight less than 0.6 % of carbon
7213.99.090
2 Other
7214
Muu varbmaterjal rauast või legeerimata terasest, sepistatud, kuumvaltsitud, -tõmmatud või -pressitud (k.. A valtsimisjärgselt väänatud vardad), edasi töötlemata:
7214.10.000
Sepistatud
7214.20.000
Süvendite, nukkide, soonte või muude valtsimisprotsessis tekkinud deformatsioonidega või valtsimisjärgselt painutatud
7214.30.000
Muud, automaaditerasest
7214.A
Muud:
7214.91
Täisnurkse (v.. A ruudukujulise) ristlõikega:
7214.91.020
1 Containing by weight less than 0.6 % of carbon
7214.91.090
2 Other
7214.99
Muud:
7214.99.020
1 Containing by weight less than 0.6 % of carbon
7214.99.090
2 Other
7215
Muu varbmaterjal rauast või legeerimata terasest:
7215.10.000
Automaaditerasest, külmvormitud või -viimistletud, edasi töötlemata
7215.50
Muud, külmvormitud või -viimistletud, edasi töötlemata:
7215.50.A
1 Containing by weight less than 0.6 % of carbon
7215.50.010
- Containing by weight less than 0.25 % of carbon
7215.50.019
- Other
7215.50.090
2 Other
7215.90
Muud:
7215.90.010
1 Containing by weight less than 0.6% of carbon
7215.90.020
2 Other
7216
Kujuprofiilid rauast või legeerimata terasest:
7216.10.000
U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm
7216.A
L- või t-kujulised profiilid, kuumvaltsitud, -tõmmatud või -pressitud, edasi töötlemata, kõrgusega alla 80 mm:
7216.21.000
L-kujulised profiilid
7216.22.000
T-kujulised profiilid
7216.B
U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded of a height of 80 mm or more:
7216.31.000
U-kujulised profiilid
7216.32.000
I-kujulised profiilid
7216.33.000
H-kujulised profiilid
7216.40.000
L- ja t-kujulised profiilid, kuumvaltsitud, -tõmmatud või -pressitud, edasi töötlemata, kõrgusega vähemalt 80 mm
7216.50.000
Muud kujuprofiilid, kuumvaltsitud, -tõmmatud või -pressitud, edasi töötlemata
7216.C
Angles, shapes and sections, not further worked than cold-formed or cold-finished :
7216.61.000
Lehtvaltstoodetest valmistatud
7216.69.000
Muud
7216.D
Muud:
7216.91.000
Lehtvaltstoodetest külmvormitud või -viimistletud
7216.99.000
Muud
7217
Traat rauast või legeerimata terasest:
7217.10
Pindamata ja katmata pinnaga, poleeritud või poleerimata:
7217.10.A
1 Containing by weight less than 0.6 % of carbon
7217.10.010
- Containing by weight less than 0.25 % of carbon
7217.10.019
- Other
7217.10.090
2 Other
7217.20
Tsingiga pinnatud või kaetud
7217.20.A
1 Containing by weight less than 0.6 % of carbon
7217.20.B
- Containing by weight less than 0.25 % of carbon
7217.20.010
-- Of any cross sectional dimension not exceeding 1.5 mm
7217.20.011
-- Other, plated or coated with zinc specified in Subheading Note 1 (a) to Chapter 79, of circular or oval cross-section
7217.20.019
-- Other
7217.20.090
- Other
7217.20.099
2 Other
7217.30
Muude mitteväärismetallidega pinnatud või kaetud:
7217.30.A
1 Containing by weight less than 0.6 % of carbon
7217.30.B
- Containing by weight less than 0.25 % of carbon
7217.30.011
-- Solid wire for gas sealed arc welding
7217.30.019
-- Other
7217.30.090
- Other
7217.30.099
2 Other
7217.90
Muud:
7217.90.A
1 Containing by weight less than 0.6 % of carbon
7217.90.011
- Containing by weight less than 0.25 % of carbon
7217.90.019
- Other
7217.90.090
2 Other
72.B
III.- STAINLESS STEEL
7218
Roostevaba teras valuplokkidena või muude esmasvormidena; roostevabast terasest pooltooted:
7218.10.000
Valuplokid jm esmasvormid
7218.A
Muud:
7218.91.000
Täisnurkse (v.. A ruudukujulise) ristlõikega
7218.99.000
Muud
7219
Lehtvaltstooted roostevabast terasest, laiusega vähemalt 600 mm:
7219.A
Kuumvaltsitud, edasi töötlemata, rullides:
7219.11.000
Paksusega üle 10 mm
7219.12
Paksusega vähemalt 4,75 mm, kuid mitte üle 10 mm
7219.12.011
- Of chrome series, not containing nickel or containing by weight not exceeding 0.6 % of nickel, whether or not containing other elements
7219.A.A
- Of nickel series, containing by weight more than 0.6 % of nickel, whether or not containing other elements
7219.A.B
-- Containing by weight less than 7 % of nickel
7219.12.027
--- Containing by weight not exceeding 6 % of nickel and 3 % or more of Manganese
7219.12.028
--- Other
7219.12.029
-- Other
7219.13
Paksusega vähemalt 3 mm, kuid alla 4,75 mm
7219.13.011
- Of chrome series, not containing nickel or containing by weight not exceeding 0.6 % of nickel, whether or not containing other elements
7219.A.C
- Of nickel series, containing by weight more than 0.6 % of nickel, whether or not containing other elements
7219.A.D
-- Containing by weight less than 7 % of nickel
7219.13.027
---Containing by weight not exceeding 6 % of nickel and 3 % or more of Manganese
7219.13.028
--- Other
7219.13.029
-- Other
7219.14.000
Paksusega alla 3 mm
7219.B
Kuumvaltsitud, edasi töötlemata, mitte rullides:
7219.21.000
Paksusega üle 10 mm
7219.22.000
Paksusega vähemalt 4,75 mm, kuid mitte üle 10 mm
7219.23.000
Paksusega vähemalt 3 mm, kuid alla 4,75 mm
7219.24.000
Paksusega alla 3 mm
7219.C
Külmvaltsitud, edasi töötlemata:
7219.31.000
Paksusega vähemalt 4,75 mm
7219.32
Paksusega vähemalt 3 mm, kuid alla 4,75 mm
7219.32.011
- Of chrome series, not containing nickel or containing by weight not exceeding 0.6 % of nickel, whether or not containing other element
7219.C.A
- Of nickel series, containing by weight more than 0.6 % of nickel, whether or not containing other elements
7219.C.B
-- Containing by weight less than 7 % of nickel
7219.32.027
--- Containing by weight not exceeding 6 % of nickel and 3 % or more of Manganese
7219.32.028
--- Other
7219.32.022
-- Containing by weight 7 % or more but less than 10 % of nickel
7219.32.023
--Containing by weight more than 10 % of nickel
7219.33
Paksusega üle 1 mm, kuid alla 3 mm
7219.C.C
- Of chrome series, not containing nickel or containing by weight not exceeding 0.6 % of nickel, whether or not containing other element
7219.33.012
-- Containing by weight less than 12 % of chromium
7219.33.013
-- Other
7219.C.D
- Of nickel series, containing by weight more than 0.6 % of nickel, whether or not containing other elements
7219.C.E
-- Containing by weight less than 7 % of nickel
7219.33.027
--- Containing by weight not exceeding 6 % of nickel and 3 % or more of Manganese
7219.33.028
--- Other
7219.33.022
-- Containing by weight 7 % or more but less than 10 % of nickel
7219.33.023
-- Containing by weight 10 % or more of nickel
7219.34
Paksusega vähemalt 0,5 mm, kuid mitte üle 1 mm
7219.C.F
- Of chrome series, not containing nickel or containing by weight not exceeding 0.6 % of nickel, whether or not containing other element
7219.34.012
-- Containing by weight less than 12 % of chromium
7219.34.013
-- Other
7219.C.G
- Of nickel series, containing by weight more than 0.6 % of nickel, whether or not containing other elements
7219.C.H
-- Containing by weight less than 7 % of nickel
7219.34.027
--- Containing by weight not exceeding 6 % of nickel and 3 % or more of Manganese
7219.34.028
--- Other
7219.34.022
-- Containing by weight 7 % or more but less than 10 % of nickel
7219.34.023
-- Containing by weight 10 % or more of nickel
7219.35
Paksusega alla 0,5 mm
7219.35.011
- Of chrome series, not containing nickel or containing by weight not exceeding 0.6 % of nickel, whether or not containing other element
7219.C.I
- Of nickel series, containing by weight more than 0.6 % of nickel, whether or not containing other elements
7219.C.J
-- Containing by weight less than 7 % of nickel
7219.35.027
--- Containing by weight not exceeding 6 % of nickel and 3 % or more of Manganese
7219.35.028
--- Other
7219.35.022
-- Containing by weight 7 % or more but less than 10 % of nickel
7219.35.023
-- Containing by weight 10 % or more of nickel
7219.90.000
Muud
7220
Lehtvaltstooted roostevabast terasest, laiusega alla 600 mm:
7220.A
Not further worked than hot-rolled:
7220.11.000
Paksusega vähemalt 4,75 mm
7220.12.000
Paksusega alla 4,75 mm
7220.20
Külmvaltsitud, edasi töötlemata
7220.20.011
- Of chrome series, not containing nickel or containing by weight not exceeding 0.6 % of nickel, whether or not containing other element
7220.B
- Of nickel series, containing by weight more than 0.6 % of nickel, whether or not containing other elements
7220.C
-- Containing by weight less than 7 % of nickel
7220.20.027
--- Containing by weight not exceeding 6 % of nickel and 3 % or more of Manganese
7220.20.028
--- Other
7220.20.029
-- Other
7220.90.000
Muud
7221.00.000
Kuumvaltsitud varbmaterjal roostevabast terasest, korrapäratult kokku keritud
7222
Muu varbmaterjal roostevabast terasest; kujuprofiilid roostevabast terasest:
7222.A
Varbmaterjal roostevabast terasest, kuumvaltsitud, -tõmmatud või -pressitud, edasi töötlemata:
7222.11.000
Ümmarguse ristlõikega
7222.19.000
Muud
7222.20.000
Varbmaterjal roostevabast terasest, külmvormitud või -viimistletud, edasi töötlemata
7222.30.000
Muu varbmaterjal
7222.40.000
Kujuprofiilid
7223.00.000
Roostevabast terasest traat
72.C
IV.- OTHER ALLOY STEEL; HOLLOW DRILL BARS AND RODS, OF ALLOY OR NON-ALLOY STEEL
7224
Muu legeerteras valuplokkidena vm esmasvormidena; muust legeerterasest pooltooted:
7224.10
Valuplokid jm esmasvormid:
7224.10.010
1 Of high speed steel
7224.10.020
2 Of alloy tool steel, containing by weight not less than 0.5 %, separately or together, of tungsten or molybdenum
7224.10.030
3 Other
7224.90
Muud:
7224.90.010
1 Of high speed steel
7224.90.020
2 Of alloy tool steel
7224.90.030
3 Other
7225
Lehtvaltstooted muust legeerterasest, laiusega vähemalt 600 mm:
7225.A
Elektrotehnilisest räniterasest:
7225.11.000
Suundorienteeritud struktuuriga
7225.19.000
Muud
7225.30
Muust legeerterasest, kuumvaltsitud, kuid edasi töötlemata, rullides:
7225.30.100
1 Of alloy tool steel
7225.30.200
2 Of high speed steel
7225.30.A
3 Other
7225.30.910
- Pickled
7225.30.990
- Other
7225.40
Muust legeerterasest, kuumvaltsitud, kuid edasi töötlemata, mitte rullides:
7225.40.100
1 Of alloy tool steel
7225.40.200
2 Of high speed steel
7225.40.A
3 Other
7225.40.910
- Containing by weight 0.0008% or more of boron, less than basis of other elements listed in Note 1 (f) to this Chapter
7225.40.990
- Other
7225.50
Muud, külmvaltsitud, edasi töötlemata:
7225.50.100
1 Of alloy tool steel
7225.50.200
2 Of high speed steel
7225.50.900
3 Other
7225.B
Muud:
7225.91
Tsingiga elektrolüütiliselt pinnatud või kaetud:
7225.91.100
1 Bimetal, clad or combined, containing by weight more than 10 % of nickel
7225.91.200
2 Of alloy tool steel
7225.91.300
3 Of high speed steel
7225.91.900
4 Other
7225.92
Tsingiga muul viisil pinnatud või kaetud:
7225.92.100
1 Bimetal, clad or combined, containing by weight more than 10 % of nickel
7225.92.200
2 Of alloy tool steel
7225.92.300
3 Of high speed steel
7225.92.A
4 Other
7225.92.910
- Hot-dip galvannealed, of plated or coated layers undergone a homogeneous alloying process (containing by weight of 7 % or more of iron in the entire layers)
7225.92.990
- Other
7225.99
Muud:
7225.99.100
1 Bimetal, clad or combined, containing by weight more than 10 % of nickel
7225.99.200
2 Of alloy tool steel
7225.99.300
3 Of high speed steel
7225.99.900
4 Other
7226
Lehtvaltstooted muust legeerterasest, laiusega alla 600 mm:
7226.A
Elektrotehnilisest räniterasest:
7226.11.000
Suundorienteeritud struktuuriga
7226.19.000
Muud
7226.20.000
Of high speed steel
7226.B
Muud:
7226.91
Not further worked than hot-rolled
7226.91.010
1 Of alloy tool steel
7226.91.020
2 Other
7226.92
Külmvaltsitud, edasi töötlemata:
7226.92.010
1 Of alloy tool steel
7226.92.020
2 Other
7226.99
Muud:
7226.99.A
1 Bimetal, clad or combined, containing by weight more than 10% of nickel
7226.99.110
- Plated or coated with zinc
7226.99.190
- Other
7226.99.200
2 Of alloy tool steel
7226.99.900
3 Other
7227
Kuumvaltsitud varbmaterjal muust legeerterasest, korrapäratult kokku keritud:
7227.10.000
Of high speed steel
7227.20.000
Ränimangaanterasest
7227.90
Muud:
7227.90.010
1 Of alloy tool steel
7227.90.A
2 Other
7227.90.021
- Containing by weight 0.0008% or more of boron, less than basis of other elements listed in Note 1 (f) to this Chapter
7227.90.029
- Other
7228
Muust legeerterasest varbmaterjal; muust legeerterasest kujuprofiilid; legeeritud või legeerimata terasest puurtorud:
7228.10.000
Bars and rods, of high speed steel
7228.20.000
Ränimangaanterasest varbmaterjal
7228.30
Muu varbmaterjal, kuumvaltsitud, -tõmmatud või -pressitud, edasi töötlemata:
7228.30.010
1 Of alloy tool steel
7228.30.020
2 Other
7228.40
Muu varbmaterjal, sepistatud, edasi töötlemata:
7228.40.010
1 Of alloy tool steel
7228.40.020
2 Other
7228.50
Muu varbmaterjal, külmvormitud või -viimistletud, edasi töötlemata:
7228.50.010
1 Of alloy tool steel
7228.50.020
2 Other
7228.60
Muu varbmaterjal:
7228.60.010
1 Of alloy tool steel
7228.60.020
2 Other
7228.70
Kujuprofiilid
7228.70.010
1 Of alloy tool steel
7228.70.020
2 Other
7228.80.000
Puurtorud
7229
Legeerterasest traat:
7229.20.000
Ränimangaanterasest
7229.90
Muud:
7229.90.100
1 Of alloy tool steel
7229.90.200
2 Of high speed steel
7229.90.A
3 Other
7229.90.910
- Solid wire for gas sealed arc welding
7229.90.920
ツ−Plated or coated with zinc specified in Subheading Note 1 (a) to Chapter 79, containing by weight 0.0008% or more but not exceeding 0.007% of boron, less than proportions of elements other than boron listed in Note 1 (f) to this Chapter, less than 0.25% of carbon, of circular or oval cross-section, of any cross sectional dimension exceeding 1.5mm
7229.90.990
- Other

Need help to the find appropriate HS Code ?