HS-koodid - 74: COPPER AND ARTICLES THEREOF
7401 | Vasekivi; tsemenditud vask (sadestatud vask) |
7402 | Rafineerimata vask; vaskanoodid elektrolüüsi teel rafineerimiseks |
7403 | Rafineeritud vask ja vasesulamid, survetöötlemata: |
7403.A | Rafineeritud vask: |
7403.1100.00 | Katoodid ning katoodide sektsioonid |
7403.1200.00 | Traaditoorikud |
7403.1300.00 | Valtstoorikud |
7403.1900.00 | Muud |
7403.B | Vasesulamid: |
7403.2100.00 | Vasetsingisulamid (messing) |
7403.2200.00 | Vasetinasulamid (pronks) |
7403.2900.00 | Muud vasesulamid (v.. A rubriigi 7405 ligatuurid) |
7404 | Vasejäätmed ja -jäägid: |
7404.0010.00 | Rafineeritud vasest |
7404.A | Vasesulamitest |
7404.0091.00 | Vase-tsingisulamitest (messing) |
7404.0099.00 | Muud |
7405 | Vaseligatuurid |
7406 | Vasepulbrid ja -helbed: |
7406.1000.00 | Mittekihilise struktuuriga pulbrid |
7406.2000.00 | Kihilise struktuuriga pulbrid; helbed |
7407 | Vasest varbmaterjal ja profiilid: |
7407.1000.00 | Rafineeritud vasest |
7407.A | Vasesulamitest |
7407.A.A | Vase-tsingisulamitest (messing) |
7407.2110.00 | Bars and rods |
7407.2190.00 | Profiilid |
7407.2900.00 | Muud |
7408 | Vasktraat: |
7408.A | Rafineeritud vasest: |
7408.1100.00 | Ristlõike maksimaalmõõtmega üle 6 mm |
7408.A.A | Muud: |
7408.1910.00 | Of which the maximum cross-sectional dimension exceeds 0.5 mm |
7408.1990.00 | Of which the maximum cross-sectional dimension does not exceed 0.5 mm |
7408.B | Vasesulamitest |
7408.2100.00 | Vase-tsingisulamitest (messing) |
7408.2200.00 | Vase-niklisulamitest (kupronikkel) või vase-nikli-tsingisulamitest (uushõbe) |
7408.2900.00 | Muud |
7409 | Vasest plaadid, lehed ja ribad, paksusega üle 0,15 mm: |
7409.A | Rafineeritud vasest: |
7409.A.A | Rullides |
7409.1100.30 | Refined copper foil and strips, electrolytically manufactured, with a thickness of at least 0.015 mm |
7409.1100.90 | Muud |
7409.1900.00 | Muud |
7409.B | Vase-tsingisulamitest (messing) |
7409.2100.00 | Rullides |
7409.2900.00 | Muud |
7409.C | Vase-tinasulamitest (pronks): |
7409.3100.00 | Rullides |
7409.3900.00 | Muud |
7409.4000.00 | Vase-niklisulamitest (kupronikkel) või vase-nikli-tsingisulamitest (uushõbe) |
7409.9000.00 | Muudest vasesulamitest |
7410 | Vaskfoolium (trükiga kaetud või mitte, paberist, papist, plastist vms materjalist aluskihiga või ilma) paksusega kuni 0,15 mm (aluskihti arvestamata): |
7410.A | Aluskihita: |
7410.A.A | Rafineeritud vasest: |
7410.1100.40 | Refined copper foil and strips, electrolytically manufactured, with a thickness of at least 0.015 mm |
7410.1100.90 | Muud |
7410.1200.00 | Vasesulamitest |
7410.B | Aluskihil: |
7410.B.A | Rafineeritud vasest: |
7410.2100.10 | Sheet or plate of polytetrafluoroethylene, containing aluminium oxide or titanium dioxide as filler or reinforced with glass-fibre fabric, covered on both sides with copper foil |
7410.2100.20 | Foils, rolls composed of one layer of glass epoxy of 100 µm colaminated with refined copper foil on one or two sides of 35 µm with a tolerance of 10% for use in the production of smart cards |
7410.2100.30 | Film of polyimide, whether or not containing epoxide resin and/or glass fibre, covered on one side or on both sides with a copper foil |
7410.2100.40 | Sheet or plates:- consisting of at least a central layer of paper or one central sheet of any type of nonwoven fibre, laminated on each side with glass-fibre fabric and impregnated with epoxide resin, or- consisting of multiple layers of paper, impregnated with phenolic resin,coated on one or both sides with a copper film with a maximum thickness of 0.15 mm |
7410.2100.50 | Plates:-consisting of at least one layer of fibreglass fabric impregnated with thermosetting resin,-covered on one or both sides with copper foil with a thickness of not more than 0.15 mm, and-with a dielectric constant (dk) of less than 3.9 and a loss factor (df) of less than 0.015 at a measuring frequency of 10 ghz, as measured according to ipc-tm-650 |
7410.2100.55 | Plates:- consisting of at least one layer of fibreglass fabric impregnated with epoxide resin,- covered on one or both sides with copper foil with a thickness of not more than 0.15 mm,- with a dielectric constant (dk) of less than 5.4 at 1 mhz, as measured according to ipc-tm-650 2.5.5.2,- with a loss tangent of less than 0.035 at 1 mhz, as measured according to ipc-tm-650 2.5.5.2,- with a comparative tracking index (cti) of 600 or more |
7410.2100.90 | Muud |
7410.2200.00 | Vasesulamitest |
7411 | Vasktorud: |
7411.A | Rafineeritud vasest: |
7411.1010.00 | Straight |
7411.1090.00 | Muud |
7411.B | Vasesulamitest |
7411.B.A | Vase-tsingisulamitest (messing) |
7411.2110.00 | Straight |
7411.2190.00 | Muud |
7411.2200.00 | Vase-niklisulamitest (kupronikkel) või vase-nikli-tsingisulamitest (uushõbe) |
7411.2900.00 | Muud |
7412 | Vasest toruliitmikud (näiteks muhvid, põlved, äärikud): |
7412.1000.00 | Rafineeritud vasest |
7412.2000.00 | Vasesulamitest |
7413 | Trossikee, trossid, punutud lindid jms vasktooted, elektriisolatsioonita: |
7413.0000.10 | With fittings attached, for use in civil aircraft |
7413.0000.20 | Loudspeaker centring ring, consisting of one or more vibration dampers and minimum two non-insulated copper cables, therein woven or pressed |
7413.0000.90 | Muud |
7415 | Naelad, tihvtid, rõhknaelad, klambrid (v.. A rubriigis 8305 nimetatud) jms vasest tooted või vaskpeadega raud- ja terastooted; kruvid, poldid, mutrid, kruvikonksud, needid, tüüblid, splindid, seibid (sh vedruseibid) jms vasest tooted: |
7415.1000.00 | Naelad, tihvtid, rõhknaelad, klambrid jms |
7415.A | Muud keermestamata tooted: |
7415.2100.00 | Seibid (sh vedruseibid) |
7415.2900.00 | Muud |
7415.B | Muud keermestatud tooted: |
7415.3300.00 | Kruvid; poldid ja mutrid |
7415.3900.00 | Muud |
7418 | Vasest laua-, köögi- jm majapidamistarbed, nende osad; nõudepesunuustikud, küürimis- või poleerimispadjakesed, -kindad jms; vasest sanitaartehnikatooted: |
7418.A | Laua-, köögi- jm majapidamistarbed ja nende osad; nõudepesunuustikud, küürimis- või poleerimispadjakesed, -kindad jms: |
7418.1010.00 | Cooking or heating apparatus of a kind used for domestic purposes, non-electric, and parts thereof |
7418.A.A | Muud: |
7418.1090.10 | Hand-made |
7418.1090.90 | Muud |
7418.B | Sanitaartehnikatooted ja nende osad |
7418.2000.10 | Hand-made |
7418.2000.90 | Muud |
7419 | Muud vasktooted: |
7419.A | Valatud, vormitud, stantsitud või sepistatud,edasi töötlemata: |
7419.2000.10 | Hand-made |
7419.2000.90 | Muud |
7419.B | Muud: |
7419.8010.00 | Cloth (including endless bands), grill and netting, of wire of which no cross-sectional dimension exceeds 6 mm; expanded metal |
7419.8030.00 | Springs |
7419.B.A | Muud: |
7419.8090.10 | Hand-made |
7419.B.A.A | Muud: |
7419.8090.91 | Disc (target) with deposition material, consisting of molybdenum silicide:- containing 1mg/kg or less of sodium and- mounted on a copper or aluminium support |
7419.8090.99 | Muud |
Need help to the find appropriate HS Code ?
or